Electrochemical polymerisation of 2-aminofluorene in ethylalcohol/water medium

Electrochemical polymerisation of 2-aminofluorene, 2AF, was investigated in ethylalcohol/water mixture (3:2, v:v) in the presence of HClO₄ as the supporting electrolyte via constant potential electrolysis, CPE. Prior to CPE, electrochemical behaviour of the monomer was investigated in the same solvent-electrolyte couple utilising cyclic voltammetry, CV. Electrochemical polymerisation of the monomer yielded insoluble, dark bluish-green, conducting polymer deposit on the electrode surface. Characterisation of the polymer film has been carried out using FT-IR spectroscopic technique and thermal behaviour was studied using differential scanning calorimetry, DSC. Spectroelectrochemical, SPEL, behaviour of the polymer on ITO working electrode was studied by recording the electronic absorption spectra, in situ, in monomer-free solution at different potentials and it is found that the film can be reversibly cycled between −0.1 and 1.1 V vs SCE. Paramagnetic behaviour of the polymer was monitored using in situ ESR spectroscopy. The temperature dependence of conductivity supported the Mott's variable range hopping, VRH, mechanism for poly(aminofluorene), PAF.     

Recent advances in the neodymium catalysed polymerisation of 1,3-dienes

The benefits of using a homogeneous neodymium-based catalyst for the industrial “high cis” polymerisation of 1,3-butadiene are underlined. Preformed homogeneous catalysts for the “high cis” polymerisation of 1,3-butadiene based on Nd(carboxylate)₃/diisobutylaluminium hydride/^tbutyl chloride have been examined. The effects of changing (a) the order of catalyst component addition, (b) the carboxylate component and (c) the halogen component, on catalyst homogeneity, activity and polymer characteristics have been examined.     

Silica nanoparticle-templated methacrylic acid monoliths for in-line solid-phase extraction–capillary electrophoresis of basic analytes

Polymeric ion-exchange monoliths typically exhibit low capacities due to the limited surface area on the globules of the monoliths. The ion-exchange binding of protonated weakly basic analytes on deprotonated carboxylate sites on methacrylate polymer monoliths has been increased by templating the monoliths with silica nanoparticles. The templating method is achieved by adding the nanoparticles as a suspension to the polymerisation mixture. After polymerisation, the nanoparticles are removed by washing the monolith with strong base. Monolithic columns prepared using this procedure have exhibited a 33-fold increase in ion-exchange capacity when compared to untemplated monoliths prepared and treated under similar conditions. The templating procedure does not alter the macroporous properties of the polymer monolith, confirmed through scanning electron microscopy and BET surface area analysis, but provides increased capacity predominantly through the re-orientation of more carboxylic acid groups. The resulting increase in ion-exchange capacity has proven to be useful for the preconcentration and separation of neurotransmitters by in-line solid-phase extraction–capillary electrophoresis. The increased capacity of the templated monolith allowed the injection time to be increased 10 times over that of an untemplated monolith, allowing 10 times more sample to be injected with the efficiencies and recoveries remaining unaffected. The enhancement in sensitivity for the test mixture of neurotransmitter (dopamine, norepinephrine and metanephrine) ranged 1500–1900 compared to a normal hydrodynamic injection in capillary electrophoresis. Efficiencies obtained for the neurotransmitters were 100 000–260 000 plates, typical of those obtained in capillary zone electrophoresis. The applicability of the increased capacity silica nano-templated polymer monolith was demonstrated by analysing trace levels of caffeine in biological, food and environmental samples.     

The reactor polymer alloys: The shifting of the frontier of polymer research

The discovery (1968) of the high yield Ziegler-Natta catalysts based on active MgCl₂ was the beginning of a scientific and industrial revolution that has brought about the creation of superactive, isospecific, spheriform fourth generation catalytic systems. The rationalization of the polymer/catalyst replication phenomenon and the understanding of the catalyst “architecture” effects on polymer shape and morphology has led to the exploitation of the “Reactor Granule Technology”. This has made the generation of a broad range of homo, copolymers and multiphase alloys (Catalloy) possible by synthesis, most of which having a previously unobtainable spectrum of performance (Refs. 1,2,3). The reactor granule technology concept has also been the basis for the achievement of a family of polyolefin/non polyolefin alloys with engineering properties. More recently, the reactor granule approach has been extended so as to couple the advantages of both heterogeneous and homogeneous metallocene catalysts (mixed catalysis), thus allowing the synthesis of a very new family of “in situ” polyolefin alloys.     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

XPS characterisation of core-shell silica-polymer composite particles synthesised by atom transfer radical polymerisation in aqueous media

Near-monodisperse, siloxane-functionalised silica particles are used as a colloidal substrate for the surface-initiated polymerisation of various hydrophilic methacrylates: oligo(ethylene glycol) methacrylate (OEGMA), 2-(N-morpholino)ethyl methacrylate (MEMA), and ammonium 2-sulfatoethyl methacrylate (SEM) by atom transfer radical polymerisation in aqueous media at room temperature. The bulk and surface compositions of the resulting composite particles were assessed using various techniques. Thermogravimetric analysis of the resulting silica-polymer composites indicated polymer loadings of 5.4-8.6%, depending on the nature, structure and target degree of polymerisation (D_p). Dynamic light scattering studies indicate increases in hydrodynamic diameter of 14-87 nm compared to the reference silica particles. FT-IR spectroscopy confirmed additional features characteristic of the carbonyl group and pendant end-chain functionalities of the methacrylic polymer chains. The elemental and chemical surface compositions of the initial silica particles and final polymer-grafted composite particles were extensively investigated by X-ray photoelectron spectroscopy (XPS). The composite particles had appreciably higher C/Si atomic ratios, compared to the original initiator-functionalised silica particles, and these ratios increased with increasing target D_p. In addition, close inspection revealed that the relative intensities of the various components of the peak-fitted C1s envelopes varied significantly, depending on the target degree of polymerisation and the chemical structure of the methacrylic monomer. Moreover, in the case of the MEMA and SEM polymerisations, new nitrogen (MEMA) and sulfur (SEM) XPS signals were detected. This XPS study confirmed the presence of a thin outer layer of grafted polymer chains surrounding the silica particles.     

Preparation of ion-imprinted polyvinyl sulfonate-grafted silica particles for trace enrichment of Th(IV) prior to determination by inductively coupled plasma-mass spectrometry

Grafting from polymerisation technique has been used to prepare Th(IV) ion-imprinted polyvinyl sulfonate (IIPVS)-bonded silica particles. The graft polymerisation of vinyl sulfonate (VS) on the surface of silica particles was achieved in aqueous medium through thermal decomposition of surface-bound azo initiators (60°C) in the presence of thorium ion. The prepared material was characterised by Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. The entrapped template ion was then removed using 2 M HCl. The experimental batch rebinding data were successfully described by the Langmuir–Freundlich model. The prepared material was then packed to a PTFE micro-column (20 mm × 3.0 mm, id) to evaluate its efficiency in column operations prior to determination by inductively coupled plasma-mass spectrometry (ICP-MS). The limit of detection of the method and breakthrough capacity of the column was evaluated as 0.074 µg L^?1 and 0.83 mg g^?1, respectively. The selectivity of the prepared polymer towards Th(IV) ion was investigated in the presence of some foreign competitor ions, including U(VI). Finally, the proposed method has been used to determine Th(IV) ion in real samples.     

Polythiolactone-Decorated Silica Particles: A Versatile Approach for Surface Functionalization,Catalysis and Encapsulation

The surface chemistry of colloidal silica has tremendous effects on its properties and applications. Commonly the design of silica particles is based on their de novo synthesis followed by surface functionalization leading to tailormade properties for a specific purpose. Here, the design of robust “precursor” polymer-decorated silica nano- and microparticles is demonstrated, which allows for easy post-modification by polymer embedded thiolactone chemistry. To obtain this organic-inorganic hybrid material, silica particles (SiO₂P) were functionalized via surface-initiated atom transfer radical polymerization (SI-ATRP) with poly(2-hydroxyethyl acrylate) (PHEA)-poly(thiolactone acrylamide (PThlAm) co-polymer brushes. Exploiting the versatility of thiolactone post-modification, a system was developed that could be used in three exemplary applications: 1) the straightforward molecular post-functionalization to tune the surface polarity, and therefore the dispersibility in various solvents; 2) the immobilization of metal nanoparticles into the polymer brushes via the in situ formation of free thiols that preserved catalytic activity in a model reaction; 3) the formation of redox-responsive, permeable polymer capsules by crosslinking the thiolactone moieties with cystamine dihydrochloride (CDH) followed by dissolution of the silica core.     

Microwave-assisted <Emphasis Type="Italic">in situ</Emphasis> synthesis of fluorescent gold nanoclusters with BSA/montmorillonite and application on latent fingermark imaging

A method for in situ preparation of fluorescent gold nanoclusters (AuNCs) with bovine serum albumin/montmorillonite composite powder (AuNC-BSA/MMT) was developed, and the products were used to detect latent fingermarks. In this work, AuNCs were “grown” both inside and on the surface of BSA/MMT clay using one-step reduction of HAuCl4 by BSA. The as-prepared AuNC-BSA/MMT nanocomposites emit intensive red fluorescence under the excitation of UV-visible light and show stable chemical features and low toxicity. The obtained fluorescent powders were characterized by UV-visible absorption spectroscopy, fluorescence spectroscopy, infrared spectroscopy, transmission electron microscopy/high-resolution transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction to depict their sizes, structural information and optical features. Given their environmentally friendly preparation, simple operation, low cost, efficient UVvisible radiation-dependent photoluminescence and good affinity with finger residues, the in situ synthesized AuNC-BSA/MMT nanocomposite powders were used as an alternative fluorescent developing reagent for developing latent fingermarks deposited on various object surfaces (such as glass, aluminum foil, painted metal, plastic products and weighing papers) for individual identification. As results, the developed fingermarks with clear patterns and satisfactory level-2 (minutiae points) and level-3 (sweat pores) ridge details were obtained. Notably, treated prints could be excited by red light and emitted near infrared fluorescence, which was beneficial to avoid background interference and reduce the damage caused by UV light. With the advantages of the simple preparation process and good enhancement performance for latent fingermarks, the proposed method might be used in the preparation of various fluorescent probes for detecting trace evidence in forensic sciences.     

Preparation of polypropylene/silica composites by in-situ sol–gel processing using hyperbranched polyethoxysiloxane

Based on a volatile-free silica liquid precursor polymer—hyperbranched polyethoxysiloxane (PEOS), an industrial compatible in situ sol–gel process for the preparation of polymer/silica nanocomposites has been developed. It has been shown that in the presence of a catalyst water vapor induced a fast conversion of liquid PEOS to solid silica in polypropylene (PP) melt in a twin-screw microcompounder. Solid state NMR showed that the in situ conversion of PEOS proceeded to a large extent. With small amounts of PEOS this procedure yielded PP/silica composites with particle size less than 100 nm. The particle size increased with the PEOS amount blended with PP. Nevertheless, the particles were observed to be homogeneously dispersed within the polymer matrix. PP/silica composites prepared by in situ sol–gel technology showed improved thermal properties, but almost not affected mechanical properties in comparison with pure PP.     

Synthesis of gold functionalized poly-bisvinylethyleneurea/silica hybrid materials

Novel gold/poly-(1,3-divinyl-imidazolid-2-one)/silica [poly-bisvinylethyleneurea (poly-BVU)/silica)] hybrid particles have been produced by adsorption and spontaneously occurring in situ reduction of Au(3+) cations on the surface of poly-BVU/silica hybrid particles. The successful functionalization of the poly-BVU/silica particles with gold nanoclusters has been evidenced by UV/vis and XPS spectroscopy as well as scanning electron microscopy. The size of the resulting gold clusters, estimated by means of the Mie-Drude theory on the full peak width at half-maximum of the surface plasmon UV/vis absorbance, correlates with the polymer content of the poly-BVU/silica hybrid particles used for the modification. Therefore, it is possible to control the size of the gold clusters simply by adjusting the monomer/silica ratio in the polymerization process, which corresponds with the polymer content of the hybrids.     

Organic Polymer-Silica Gel Hybrid: A Precursor of Highly Porous Silica Gel

In this article I describe two of our discoveries. The first is the preparation of a transparent solid material composed of an organic polymer and silica gel. A novel material called a “hybrid” has successfully been prepared by the sol-gel reaction of ethyl orthosilicate in the presence of an organic polymer consisting of repeating units having an N-alkylamide group. The molecular-level dispersion of the organic polymer in the framework of silica gel has been established, which is due to the hydrogen-bond interaction between the organic polymer and silanol group of silica gel. The second discovery is the preparation of porous silica gel, which has been achieved by calcination of the organic polymer-silica gel hybrid at 600°C. Pore sizes ranging from 10 to 20 Å have been attained. A method of controlling pore size has been proposed.     

Optical properties of electron beam- and UV-cured polypropyleneglycoldiacrylate/liquid crystal E7 systems

This contribution focuses on a detailed investigation of the relationship between the method of polymerisation/cross-linking, such as slow and rapid UV radiation, and high voltage accelerated electron beam (EB), and the obtained physical properties including phase diagrams, polymerisation and phase separation kinetics, morphologies and electro-optic responses of polypropyleneglycoldiacrylate (PPGDA) monomers, in the presence of the nematic liquid crystal E7. The longer the spacing between double bonds, the more rapid was the photopolymerisation under both UV systems; however, the reverse was proved under EB. More homogenous and regular morphologies were obtained under EB curing.

The electro-optical responses of various polymer dispersed liquid crystals (PDLCs) systems exhibited remarkable differences between the UV-cured samples and those cured by the EB technique. It was found that the threshold and saturation voltages considerably increased in the case of the UV-cured systems. Other results involving the contrast ratio, which is higher for EB-cured systems, confirm their higher quality, although the rapid photopolymerisation UV source was employed, which slightly improved the electro-optical responses. Moreover, EB curing leads to high enough conversions without a photoinitiator, which may act as an impurity that might have a strong impact on the electro-optical performance of the obtained PDLCs.     

Acrylic polymer/silica hybrid for electron‐beam resists

An acrylic polymer/silica hybrid resist film was investigated for fabricating a microstructure by electron‐beam (EB) lithography. EB lithography on the hybrid thin film afforded a positive pattern whose depth corresponded to the EB exposure dose; this indicated that the hybrid was an analog resist and could fabricate a three‐dimensional microstructure. The resist film had high heat resistance and compatibility with the underlying quartz plate, probably because of the silica component. The acrylic polymer/(RSiO_1.5)_n hybrid film showed higher EB sensitivity than a film of the crosslinked acrylic polymer and an acrylic polymer/(SiO₂)_n hybrid. Atomic force microscopy observation of the hybrid film surface showed the homogeneous dispersion of the acrylic polymer and the silica components in the hybrid film. The acrylic polymer component was EB‐sensitive, whereas dispersing the acrylic polymer and silica components homogeneously also played an important role in increasing the EB sensitivity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2107–2116, 2006     

Synthesis of poly(vinylidene fluoride) (PVdF)/silica hybrids having interpenetrating polymer network structure by using crystallization between PVdF chains

High transparent and homogeneous poly(vinylidene fluoride) (PVdF)/silica hybrids were obtained by using an in‐situ interpenetrating polymer network (IPN) method. The simultaneous formation of PVdF gel resulting from the physical cross‐linking and silica gel from sol–gel process prevented the aggregation of PVdF in silica gel matrix. To form the physical cross‐linking between PVdF chains, the cosolvent system of dimethylformaide (DMF) and γ‐butyrolactone was used. The obtained PVdF/silica hybrids had an entangled combination of physical PVdF gel and silica gel, which was called a “complete‐ IPN” structure. The physical cross‐linking between PVdF chains in silica gel matrix was confirmed by differential scanning calorimetry (DSC) measurements. The miscibility between PVdF and silica phase was examined by scanning electron microscopy (SEM) and tapping mode atomic force microscopy (TM‐AFM) measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3543–3550, 2005     

Aspects of the thermal properties of poly(2-vinyl anthraquinone)

2-Vinyl anthraquinone was synthesized as described previously. In this article, three approaches to polymerization of 2-vinyl anthraquinone are examined bulk thermal, chemical, and γ-radiation-induced. Polymerization in both the bulk phase and in solution were attempted. Thermal characterization has been carried out using differential scanning calorimetry (DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and hot-stage optical microscopy (HSOM). Thermogravimetric analysis (TGA) has been used to provide procedural “apparent” activation energies for decomposition of the polymer.     

New Chromium on Silica Gel Catalysts with very high activity for the polymerization of ethylene

Together with the known chromium (II)/silica gel catalyst (Phillips catalyst) for the polymerization of ethylene, two new ones have been investigated. It was found that a chromium(II)-“repoly” catalyst (prepared by short reaction of the chromium(II)/silica gel with ethylene at temperatures between 100 and 225°C) and a chromium(III)/silica gel catalyst have up to hundred times higher activity than the chromium(II) one. Activation energies were calculated as 54.6, 49.6 and 43.8 kJ per mol, respectively. The number of active sites was determined by measuring the integrated absorbance of the C? H and C?O stretching vibrations of the polymer. At low chromium concentration (0.056%) roughly 50% of all chromium was catalytically active in the case of chromium(II) and chromium(III) on silica gel. For the chromium(II)-“repoly” catalyst all chromium atoms can be active. The turnover numbers for the polymerization at 20°C were calculated as 0.1 (chromium(II)), 7.5 (chromium(II)-“repoly”) and 20 (sec^?1 atm^?1) (chromium(III)).     

Saturation ratio of poly(ethylene oxide) to silicate in melt intercalated nanocomposites

Melt intercalation has been found to be a very successful approach for preparation of polymer-clay nanocomposites. An aspect of this area that has been little investigated is the amount of polymer required to fill the interlayer galleries of the clay. This paper reports experiments which determine the amount of poly(ethylene oxide) (PEO) required to saturate the spacing between montmorillonite (MMT) or organically-modified bentonite (B34) layers. Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to determine the saturation ratios of PEO to silicates, which are then compared to theoretical calculations. The deduced saturation ratio of PEO to MMT is 28:72, and PEO to B34 15:85 by XRD and DSC, whilst ratios of PEO to MMT of 21:79 and PEO to B34 10:90 were obtained via TGA. The density of intercalated PEO in the silicate galleries is estimated to be 0.82 g/cm³, which suggests that PEO in the silicate galleries is far less efficiently packed than in the amorphous region of the bulk polymer.     

Fabrication of Bonded Monolithic Porous Layer Open Tubular (monoPLOT) Columns in Wide Bore Capillary by Laminar Flow Thermal Initiation

A novel scalable procedure for the thermally initiated polymerisation of bonded monolithic porous layers of controlled thickness within open tubular fused silica capillaries (monoPLOT columns) is presented. Porous polymer layers of either polystyrene-divinylbenzene or butyl methacrylate-ethylene dimethacrylate, of variable thickness and morphology were polymerised inside fused silica capillaries utilising combined thermal initiation and laminar flow of the polymerisation mixture. The procedure enables the production through thermal initiation of monoPLOT columns of varying length, internal diameter, user defined morphology and layer thickness for potential use in both liquid and gas chromatography. The morphology and thickness of the bonded polymer layer on the capillary wall is strongly dependent on the laminar flow properties of the polymerisation mixture and the changing shear stress within the fluid across the inner diameter of the open capillary. Owing to the highly controlled rate of polymerisation and its dependence on fluid shear stress at the capillary wall, the procedure was demonstrably scalable, as illustrated by the polymerisation of identical layers within different capillary diameters.

     

Synthesis and Electrochromic Properties of Star‐Shaped Oligomers with Phenyl Cores

A series of star‐shaped conjugated oligomers, 1,3,5‐tri(2′‐thienyl) benzene (3TB), 1,3,5‐tri(3′,4′‐ethylenedioxythienyl) benzene (3EB), 1,3,5‐tri[5′,2“‐(3”,4“‐ethylenedioxy‐thienyl)‐2′‐thienyl] benzene (3ETB), and 1,3,5‐tri[5′,2”‐(3“,4”‐ethylenedioxy‐thienyl)‐2′‐thienyl]‐4‐(3′,4′‐ethylenedioxythienyl)benzene (3TB‐4EDOT), were synthesized. The star‐shaped polymer, poly(1,3,5‐tri[5′,2“‐(3”,4“‐ethylenedioxythineyl)‐2′‐thienyl]benzene) (P3ETB), was also prepared. The electrochemical and electrochromic properties of these conjugated oligomers and polymer were investigated. These oligomer and polymer films showed reversible, clear color changes upon electrochemical doping and dedoping. The color of the P3ETB film reversibly changed from orange to blue under doping and dedoping. The switching times for doping and dedoping were 1.2 and 0.9 s, respectively.