Surface modification of poly(tetrafluoroethylene) by a low-temperature cascade arc torch and radio-frequency plasmas

Poly(tetrafluoroethylene) (PTFE) films were treated with a low-temperature cascade arc torch (LTCAT) and radio-frequency (RF) plasmas of argon and hydrogen. The plasma-treatment effect on the PTFE surface was studied with contact-angle measurement and scanning electron spectroscopy (SEM). LTCAT argon plasma, which is recognized as a beam of excited argon neutrals, was very efficient at improving the surface hydrophilicity of PTFE. For both the LTCAT and RF operation, argon plasma was more effective at modifying the surface wettability of PTFE films than hydrogen plasma was. Furthermore, the sample positions (inside or beyond the glow region) had a strong impact on the efficiency of the plasma treatment. SEM surface images indicated that no significant morphology change was induced on the PTFE films exposed to a LTCAT and RF argon plasmas. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4432–4441, 1999     

Surface modification of polyester by oxygen‐ and nitrogen‐plasma treatment

In this paper, we present a study on the surface modification of polyethyleneterephthalate (PET) polymer by plasma treatment. The samples were treated by nitrogen and oxygen plasma for different time periods between 3 and 90 s. The plasma was created by a radio frequency (RF) generator. The gas pressure was fixed at 75 Pa and the discharge power was set to 200 W. The samples were treated in the glow region, where the electrons temperature was about 4 eV, the positive ions density was about 2 × 10¹⁵ m^?3, and the neutral atom density was about 4 × 10²¹ m^?3 for oxygen and 1 × 10²¹ m^?3 for nitrogen. The changes in surface morphology were observed by using atomic force microscopy (AFM). Surface wettability was determined by water contact angle measurements while the chemical composition of the surface was analyzed using XPS. The stability of functional groups on the polymer surface treated with plasma was monitored by XPS and wettability measurements in different time intervals. The oxygen‐plasma‐treated samples showed much more pronounced changes in the surface topography compared to those treated by nitrogen plasma. The contact angle of a water drop decreased from 75° for the untreated sample to 20° for oxygen and 25° for nitrogen‐plasma‐treated samples for 3 s. It kept decreasing with treatment time for both plasmas and reached about 10° for nitrogen plasma after 1 min of plasma treatment. For oxygen plasma, however, the contact angle kept decreasing even after a minute of plasma treatment and eventually fell below a few degrees. We found that the water contact angle increased linearly with the O/C ratio or N/C ratio in the case of oxygen or nitrogen plasma, respectively. Ageing effects of the plasma‐treated surface were more pronounced in the first 3 days; however, the surface hydrophilicity was rather stable later. Copyright © 2008 John Wiley & Sons, Ltd.     

Laser induced surface modification of polydimethylsiloxane as a super-hydrophobic material

In order to render the surface of polydimethylsiloxane (PDMS) super-hydrophobic without changing its bulk properties, a PDMS film without photosensitizer was exposed to CO₂ pulsed laser, at room temperature, as the excitation source. The modified surfaces have been studied by performing scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDXA) and attenuated total reflectance infrared (ATR-IR) spectroscopy. To evaluate the surface property, the water drop contact angle was measured. The dependence of ---Si---O---Si infrared peak intensity, O/Si ratio and water drop contact angle of the treated PDMS as a function of the number of laser pulses were studied. SEM micrographs and water drop contact angle variations show the uniform porosity and super-hydrophobic nature on the surface of PDMS. ATR-FTIR spectra show that the modified PDMS surface contains carbonate groups which enriched the oxygen content of the surface. EDXA analysis shows a higher percentage of oxygen on the surface of the modified PDMS. The hydrophobicity of the samples was found to depend upon the number of laser pulses, but with significant variation between the treated samples. The bulk mechanical properties of PDMS after being laser-treated did not change as shown by dynamic mechanical thermal analysis (DMTA).     

Surface modification of LDPE film by CO2 pulsed laser irradiation

The influence of the pulsed CO₂ laser irradiation on the surface structure of the LDPE film was investigated. Significant changes were observed on the surface of laser treated films as it was verified by the attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy and contact angle-measurement. Formation of polar functional groups onto the LDPE surfaces exhibited by the ATR-FTIR spectra was shown to be strongly dependent on the number of the CO₂ laser pulses. The intensity of the polar groups increased with increasing the number of pulses up to two and then slightly decreased at three laser pulses. This was also confirmed with the contact angle measurements in which the sample subjected to two laser pulses showed the highest wettability i.e. the lowest water drop contact angle. The concentration of peroxide groups formed on the surface of the laser treated films was determined quantitatively by UV spectroscopic method using iodide procedure. The latter results showed a similar trend with the results obtained using FTIR spectroscopy.     

Surface analysis of ripple pattern on PS and PEN induced with ring‐shaped mask due to KrF laser treatment

The approach for ripple nanopattern construction on surface of two polymer substrates [polyethylene naphthalate (PEN) and polystyrene (PS)] exposed by a KrF pulse excimer UV laser through a contact lithographic mask with circular slit was proposed in this paper. Thin layer of gold was deposited on samples after the laser treatment. Changes in the morphology of the surface of both the shielded and exposed areas of the substrates, as well as the dimensions of the laser‐induced periodic surface structures, were determined (by atomic force microscopy, laser confocal microscopy and scanning electron microscopy), compared with observations and measurements made on samples treated directly (without a contact mask) under the same conditions. The morphology of the interface between the treated and untreated regions was also closely studied. Surface chemistry of treated samples was studied in detail by X‐ray Photoelectron Spectroscopy. The detailed study of surface chemistry of modified PEN and PS revealed a significant increase of oxygen concentration for laser treated PS and increase of carboxyl groups in case of PEN. The potential application of this research can be found in biotechnology, micro technology and several other fields. Copyright © 2016 John Wiley & Sons, Ltd.     

Plasma-induced graft-polymerization of polyethylene glycol acrylate on polypropylene films: Chemical characterization and evaluation of the protein adsorption

This work deals with the optimization of argon plasma-induced graft-polymerization of polyethylene glycol acrylate (PEGA) on polypropylene (PP) films in order to obtain surfaces with a reduced protein adsorption for possible biomedical applications. To this end, we examined the protein adsorption on the treated and untreated surfaces. The graft-polymerization process consisted of four steps: (a) plasma pre-activation of the PP substrates; (b) immersion in a PEGA solution; (c) argon plasma-induced graft-polymerization; (d) washing and drying of the samples. The efficiency of these processes was evaluated in terms of the amount of grafted polymer, coverage uniformity and substrates wettability. The process was monitored by contact angle measurements, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray Photoelectron Spectroscopy (XPS) and atomic force microscopy (AFM) analyses. The stability of the obtained thin films was evaluated in water and in Phosphate Buffer Saline (PBS) at 37 °C. The adsorption of fibrinogen and green fluorescent protein (GFP) – taken as model proteins – on the differently prepared surfaces was evaluated through a fluorescence approach using laser scanning confocal microscopy with photon counting detection. After plasma treatments of short duration, the protein adsorption decreases by about 60–70% with respect to that of the untreated film, while long plasma exposure resulted in a higher protein adsorption, due to damaging of the grafted polymer.     

Effect of cold atmospheric plasma treatment on hydrophilic properties of fluorosilicone rubber

Vulcanized fluorosilicone rubber for aviation was treated by argon and oxygen cold atmospheric plasma (CAP) in order to modify its hydrophilic properties. The sample's chemical composition was analyzed by X‐ray photoelectron spectroscopy (XPS). The static contact angle, surface free energy, and adhesion strength were used to indicate the hydrophilic properties. Additionally, the surface morphologies of the specimens were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results showed that the contact angle declined from 101.5° to 22°, and the surface energy rose from 21.3 to 71.2 mJ/m² after they were treated by argon plasma. Alternatively, the water contact angle decreased to 25.5°, and the surface energy increased to 70.6 mJ/m² after they were treated by oxygen plasma. In addition, the SEM and AFM images of the samples illustrate that the treated surface of fluorosilicone rubber becomes rougher than the non‐treated surface. The concentrations of carbon (C) and fluorine (F) elements of the material' surface decreased and the contents of O element greatly enriched after plasma treatment. Additionally, chemical group C―O and C―OH appeared after the treatment. However, the hydrophilic effect of the plasma treatment is aged after the specimens were stored for 8–12 h. Copyright © 2016 John Wiley & Sons, Ltd.     

Stability of polycarbonate and polystyrene surfaces after hydrophilization with high intensity oxygen RF plasma

A general drawback observed with plasma treatment is the limited stability of the hydrophilic-treated surfaces toward washing, storage, or heating. It has recently been found that oxygen, air, or argon radiofrequency plasmas with higher intensities than normally used can give hydrophilic surfaces having good wash stability. High intensity oxygen plasma treatment of polystyrene and polycarbonate surfaces was therefore carried out using two different capacitively coupled RF reactors with internal shelf electrodes. The obtained surface characteristics and stability were evaluated using contact angle measurements, XPS, AFM, and nanoindentation. For both materials, low water contact angles were found to correlate with high surface oxygen content. Only the surfaces exposed to relatively intense treatments, with self-bias voltages above 140 V (polystyrene) or 240 V (polycarbonate), could withstand washing in ethanol and remain highly hydrophilic. Substantial amounts of nonsoluble material were observed on the plastic substrates after treatment. Furthermore, for polycarbonate Young's modulus of the surface was found to increase with increasing intensity of the plasma. These observations were taken as an indication that extensive cross-linking of the surface layer took place. After more than 6 months of storage, the samples treated with the most intense plasmas (self-bias voltages in the range of 480-600 V) still had water contact angles around 20 degrees .     

A quantitative model for the surface restructuring of repeatedly plasma treated silicone rubber

Surface restructuring in ambient air of medical grade silicone rubber surfaces modified by repeated RF plasma treatments using various discharge gases including oxygen, argon, carbon dioxide and ammonia, was studied quantitatively. From advancing and receding water contact angle data, the fraction of the surface covered by mobile and immobile polar groups, and a characteristic time constant of the restructuring process were calculated. For argon plasma treated surfaces, the fraction of immobile polar groups increased with repeated plasma treatments, but remained relatively constant for samples repeatedly treated by an ammonia plasma. The use of an oxygen plasma only yielded incorporation of mobile polar groups but not of immobile polar groups. The increase in the restructuring time constants of argon and ammonia plasma treated silicone rubber with the number of plasma treatments suggested enhanced crosslinking of the silicone rubber by these plasmas. In contrast, when an oxygen plasma was repeatedly used, the restructuring time constant decreased suggesting chain cleavage by an oxygen plasma. Tentatively, the carbon dioxide plasma treatment of silicone rubber may initially (up to 3–4 repeated treatments) yield chain cleavage, while the occurrence of crosslinking is indicated after more repetitions.     

Vacuum Ultraviolet Irradiation of Polymers

The interest in incoherent sources for wavelength-selective photochemistry has increased lately, but little is still known about the behavior of polymers when exposed to far UV and vacuum UV (VUV) radiation. The same dearth of information exists regarding UV (VUV) radiation emitted by low-pressure plasmas during polymer treatment. In order to study VUV-UV effects on several polymers (polyethylene - PE, polystyrene - PS, hexatriacontane - HTC, and poly(methyl methacrylate) - PMMA), we have used the well-characterized emissions from hydrogen (broad-band emission) and hydrogen/argon mixture (near-monochromatic radiation) plasmas as light sources. During irradiation, samples were kept under vacuum or in a flow of pure oxygen at low pressure; in both cases the radiation fluxes at the sample position have been precisely determined by careful spectroscopic calibration experiments. We have employed a quartz crystal microbalance (QCM) to measure in-situ any possible mass change of the various polymers. Following irradiation, samples were analysed by ellipsometry (for thickness and refractive index), X-ray photoelectron spectroscopy (XPS, to evaluate the near-surface composition and content of various functional groups), and atomic force microscopy (AFM, for surface topography and roughness measurements).     

Functionalization by Cold Plasmas of Polymer Model Surfaces (Hexatriacontane and Octadecyloctadecanoate) Studied by Contact Angle Measurements,XPS, and FTIR Spectroscopy

Abstract

Surface functionalization by argon or oxygen RF plasmas (13.56 MHz) of polymer model compounds, namely hexatriacontane (C₃₆H₇₄) and octadecyloctadecanoate [OOD, CH₃(CH₂)₁₆COO(CH₂)₁₇CH₃, was studied using contact angle measurements, XPS, and FTIR-ATR. In order to gain a better insight into the plasma-surface interaction mechanisms, the effects of the main plasma parameters (treatment time, power, pressure, and flow rate) on functionalization were investigated. It was shown that an argon plasma is more efficient than an oxygen plasma and that the ester-containing model compound incorporated less oxygen than the paraffinic one. After 10 seconds of treatment, contact angle measurements showed that none of these plasma parameters affect in any way the properties of the uppermost surface layer; these depend only on the nature of the sample and on the gas used in the plasma. On the other hand, ESCA, which allows a 70-Å in-depth probing, reveals the influence of the plasma parameters on both types of samples. IR, which probes to a much greater depth, evidences an evolution only for treated OOD samples. Interpretations are proposed for the effect of the plasma parameters on functionalization.     

Surface Properties of Low Density Polyethylene upon Low-Temperature Plasma Treatment with Various Gases

The surface of a LDPE was modified by Ar, O₂, N₂, CO₂ gaseous plasma. The changes in surface morphology and surface wettability were investigated using AFM and SEM. The surface chemical changes of LDPE were also characterized by FTIR-ATR. The SEM and AFM results demonstrated variable changes in surface roughness for different types of plasma gas used, the changes being more for the Ar and N₂ plasma treatments. Considering the nature of the LDPE film, XRD studies were carried out to determine changes in the percentage crystalinity. The results showed that all low pressure O₂, Ar, N₂, CO₂ gas plasmas improved the wettability of LDPE films. Contact angles decreased significantly depending on the discharge powers and exposure times. Surface morphology was also found to vary with plasma discharge powers, exposure times, and the type of gas being used. Ar and N₂ gas plasmas in general produced more superior results.     

PMMA人工晶状体表面的CF4/O2等离子体修饰

为了改善聚甲基丙烯酸甲酯(PMMA)人工晶状体的生物相容性和透光性, 采用CF4/O2等离子体技术修饰其表面. 通过衰减全反射红外光谱(ATR-FTIR)、X射线光电子能谱(XPS)、静态接触角(CA)测定、扫描电子显微镜(SEM)、紫外-可见近红外光谱(UV-Vis)等方法进行表征, 结果表明, 经CF4/O2等离子体处理后, PMMA表面的含氟和含氧基团增加, 其表面的亲水性增强, 生物相容性改善, 紫外光的隔离效率增大. 因此, 通过CF4/O2等离子体修饰能够有效地改善PMMA人工晶状体的性质.     

Particle-surface capillary forces with disjoining pressure

A new, atomic force microscopy (AFM) based experimental setup for the continuous acquisition of friction force data as a function of humidity has been developed. The current model of interactions between wet contacts under the influence of capillary effects, has been amended to include a vertical component due to the disjoining pressure and takes into account the influence of liquid films adsorbed on the surface. This is a 'switching' model, i.e. the contact between nanometer-sized sphere and a flat surface can exist in two distinct states due to capillary bridge formation/destruction as the humidity is varied. The model has been qualitatively verified on samples of differing wettability produced by UV-ozone treatment of polystyrene (PS). Results of AFM analysis of the friction vs. vapor pressure curves collected from the surface are presented. Correlation between important surface properties such as wettability, adsorption, and contact angle and friction force under varying humidity were found and discussed.     

Plasma surface modification of poly (l-lactic acid) and poly (lactic-co-glycolic acid) films for improvement of nerve cells adhesion

Radio frequency (RF) plasma treatment in O₂ was applied to modify the surface of poly (l-lactic acid) (PLLA) and poly (d,l-lactic acid-coglycolic acid) (PLGA) as biodegradable polymers. The surface structure, morphology, wettability and surface chemistry of treated films were characterized by water drop contact angle measurement, scanning electron microscope (SEM), optical invert microscope, differential scanning calorimetry (DSC) and ATIR–FTIR spectroscopy. The cell affinity of the oxygen plasma treated film was evaluated by nervous tissue B65 cell culture in stationary conditions. The results showed that the hydrophilicity increased greatly after O₂ plasma treatment. The results showed that improved cell adhesion was attributed to the combination of surface chemistry and surface wettability during plasma treatment. Cell culture results showed that B65 nervous cell attachment and growth on the plasma treated PLLA was much higher than an unmodified sample and PLGA. Surface hydrophilicity and chemical functional groups with high polar component play an important role in enhancing cell attachment and growth.     

SURFACE REARRANGEMENTS OF OXYGEN PLASMA TREATED POLYSTYRENE： SURFACE DYNAMICS AND HUMIDITY EFFECT

The time evolution of oxygen plasma treated polystyrene(PS)surfaces was investigated upon storing them in theair under controlled humidity conditions.The methods of water contact angle,X-ray photoelectron spectroscopy(XPS),sumfrequency generation(SFG)vibrational spectroscopy,and atomic force microscopy(AFM)were used to infer the surfaceproperties and structure.Chemical groups containing oxygen were formed on the PS surface with the plasma treatment,demonstrated by water contact angle and XPS.The surface polarity decayed markedly on time,as assessed by steady increasein the water contact angle as a function of storage time,from zero to around 60°.The observed decay is interpreted as arisingfrom surface rearrangement processes to burying polar groups away from the uppermost layer of the surfaces,which is incontact with air.On the other hand,XPS results show that the chemical composition in the first 3 nm surface layer isunaffected by the surface aging,and the depth profile of oxygen is essentially the same with time.A possible change of PSsurface roughness was examined by AFM,and it showed that the increase of water contact angle during surface aging couldnot be attributed to surface roughness.Thus,it is concluded that surface aging is attributable to surface reorganization andthe motion of oxygen containing groups is confined within the XPS probing depth.SFG spectroscopy,which is intrinsicallyinterface-specific,was used to detect the chemical structure of PS surface at the molecular level after various aging times.The results are interpreted as follows.During the aging of the plasma treated PS surfaces,the oxygen containing groupsundergo reorientation processes toward the polymer bulk and/or parallel to the surface,while the CH_2 moiety stands up onthe PS surface.Our results indicate that the surface configuration changes do not require large length scale segmentalmotions or migration of macromolecules.Motions that are responsible for surface configuration changes could be relativelysmall rotational motions.The aging behaviors under different relative humidity conditions were shown to be similar from18% to 91%,whereas the kinetics of surface polarity decays were faster in higher relative humidity.Here,the surfacerearrangement of polystyrene films that were previously treated by oxygen plasma and aged,and was investigated in terms ofcontact angle after the water immersion.The contact angles of the water-immersed samples were found to change andapproach the initial values before the immersion asymptotically.     

Surface characterization and properties of plasma‐modified cyclic olefin copolymer/layered silicate nanocomposites

In this study, cyclic olefin copolymer (COC)/layered silicate nanocomposites (CLSNs) were prepared by the intercalation of COC polymer into organically‐modified layered silicate through the solution mixing process. Both X‐ray diffraction data and transmission electron microscopy images of CLSNs indicate most of the swellable silicate layers were disorderedly intercalated into the COC matrix. The effect of layered silicate on the mechanical and barrier properties of the fabricated nanocomposites shows significant improvements in the storage modulus and water permeability when compared with that of neat COC matrix. Surfaces of COC and CLSN films were modified by a mixture of oxygen (O₂) and nitrogen (N₂) plasmas with various treated times, system pressures, and radio frequency (RF) powers. The surfaces of plasma‐modified COC and CLSN were investigated using scanning probe microscopy and contact‐angle measurements. The exposure of the COC and CLSN film to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new functional groups onto polymer surfaces to change the topology of COC film surfaces. The surface roughness was closely related to how high and how long the RF power was input into the system. The plasmas also led to changes in the surface properties of the CLSN surfaces from hydrophobic to hydrophilic; and the contact angle of water on the surface decreases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2745–2753, 2005     

The hydrophilization of polystyrene substrates by 172-nm vacuum ultraviolet light

This paper describes the photochemical surface modification of polystyrene (PS) substrates using vacuum ultraviolet (VUV) light 172 nm in wavelength. We have particularly focused on the effects of atmospheric pressure during VUV irradiation on the obtained surface's wettability and the stability of the wettability, in addition to its chemical structure, morphology, and photooxidation rate. Samples were photoirradiated with VUV light under pressures of 10, 10(3), or 10(5) Pa. Although, in each case, the originally hydrophobic PS surface became highly hydrophilic, the final water-contact angle and photooxidation rate depended on the atmospheric pressure. The samples treated at 10 Pa were less wettable than those prepared at 10(3) and 10(5) Pa due to the shortage of oxygen molecules in the atmosphere. The minimum water-contact angles of the samples treated at 10, 10(3), and 10(5) Pa were about 8 degrees, 0 degrees, and 0 degrees, respectively. With the samples prepared at 10 and 10(3) Pa, photooxidation reactions proceeded in the topmost region closest to the surface, while at 10(5) Pa photooxidation was found to be greatly enhanced in the deeper regions, as evidenced by angle-resolved X-ray photoelectron spectroscopy. Photoetching rates were determined through atomic force microscope observation of microstructured PS samples prepared by a simple mesh-contact method. As estimated from AFM images of the latticed microstructures obtained, the rates of samples prepared at 10(3) and 10(5) Pa were about 1.5 and 1.3 nm/min, respectively. However, no photoetched features were observable on the sample surface prepared at 10 Pa. Hydrophilic stability also varied greatly depending on atmospheric pressure. The hydrophilicity of samples treated at 10 and 10(3) Pa gradually decreased as they were exposed to air. On the other hand, the sample surface prepared at 10(5) Pa showed excellent hydrophilicity even after being left in air for 30 days.     

The effect of plasma treatment on structure and properties of poly(1-butene) surface

This paper is focused on the chemical and morphology changes in the surface of poly(1-butene) (PB-1) generated by plasma treatment. The radio frequency capacitively coupled plasma (air, argon, argon then allylamine, argon containing ammonia and argon with octafluorocyclobutane) was used. Modified surface of PB-1 was characterized by contact angle measurements, X-ray photoelectron spectroscopy, and atomic force microscopy. The surface hydrophilization by air and argon with ammonia plasmas was evaluated as most sufficient. Oppositely, a high level of hydrophobicity of PB-1 surface was reached by combination of argon with octafluorocyclobutane plasma. Upon plasma modification, hydrophilicity/hydrophobicity of treated surfaces remained stable within three days under air atmosphere and then values of contact angle slowly recovered to those of unmodified PB-1. However, morphology and surface chemical composition of plasma-modified samples remained generally unchanged during observed time. Changes in surface hydrophilicity/hydrophobicity of plasma-treated PB-1 were attributed to variance of conformation of the surface molecules.     

Effect of CO2 laser radiation on the surface properties of polyethylene terephthalate

The surfaces of polyethylene terephthalate (PET) obtained by irradiation with a CO₂ pulsed laser in air were studied. The complicated microstructures using various laser wavelengths were observed by scanning electron microscopy (SEM). The changes in chemical and physical properties of the irradiated PET surface were investigated by attenuated total reflectance infrared spectroscopy (ATR-FTIR) and contact angle measurements. ATR-IR spectrum showed that the crystallinity in the surface region decreased due to laser irradiation. The water drop contact angle also decreased with increasing of laser pulses. The density of peroxides formed on the irradiated PET surface were determined by iodide method.