Effect of GMA polymer compatibilizers on highly filled composites of low density polyethylene/magnesium hydroxide

Functional polymers such as polyethylene grafted glycidyl methacrylate （PE-g-GMA） and ethylene-methyl acrylate-glycidyl methacrylate terpolymer （E/MA/GMA） were used as compatibilizers in the preparation of highly filled composites of polyethylene/magnesium hydroxide（PE/MH）. Comparative studies were performed on the effect of magnesium hydroxide and stearic acid on the interface within polymer and magnesium hydroxide composites. The effect of polymeric compatibilizers on the properties of the composites was studied using tensile and impact tests, torque rheological analysis, differential scanning calorimetry and environmental scanning electron microscopy （ESEM）. The microstructure of highly filled PE/MH composites changed after the addition of functional polymers. The mechanical properties of the composite material increased after compatibilization. The compatibilization processes of PE-g-GMA and E/MA/GMA were different. The grafted polymer was more compatible with polyethylene, which led to a polar polymer phase. In contrast, the tercopolymer tended to adhere to the surface of MH particles.     

原子转移自由基聚合法制备新型亲水开管毛细管柱及在毛细管电色谱上的应用

为了增加开管毛细管柱(OTCC)的相比,提高分离效率,发展了表面引发原子转移自由基聚合法(SI-ATRP)制备葡萄糖聚合物修饰的开管毛细管柱。通过扫描电镜观察,该开管柱内壁上修饰了三维波浪状聚合物,明显增加了内壁比表面积和相比。在pH 3~11范围内,对含糖聚合物修饰的开管柱和空柱的电渗流进行了比较。修饰后开管柱的电渗流仅为空柱的1/2~1/3,且在pH 6~11范围内保持平稳。稳定的电渗流保证了分离的重复性和稳定性。用该开管毛细管柱成功实现了小分子混合物(苯丙氨酸、胸腺嘧啶、腺苷、鸟苷、5-溴尿嘧啶、水杨酸)以及蛋白质大分子(核糖核酸酶B、转铁蛋白和牛血清白蛋白)的有效分离,结果表明葡萄糖聚合物修饰的开管毛细管柱具有良好的重复性和稳定性。     

Improved hollow-fibre membranes for dye-affinity chromatography

Hollow-fibre membranes with different degrees of surface hydrophilicity were obtained by grafting mixtures of glycidyl methacrylate (GMA) and dimethyl acrylamide (DMAA) in various proportions, and Cibacron Blue F3G-A was attached to them through ammonia or glucamine spacers. Membrane hydrophilicity increased with the amount of dimethyl acrylamide in the grafted polymer. As the hydrophilicity increased the permeability decreased from 352 mL/cm2 min MPa for membranes grafted with GMA with ammonia spacer to 12.7 mL/cm2 min MPa for membranes grafted with GMA/DMAA 1/3 with glucamine spacer. Membranes grafted with GMA/DMAA 1/3 with ammonia spacer showed the best performance for BSA and lysozyme adsorption: maximum capacity was 15.3 +/- 2.2 mg BSA/mL membrane and 58.3 +/- 6.6 mg lysozyme/mL membrane while dissociation constants were 0.27 +/- 0.16 and 0.13 +/- 0.12 mg/mL, respectively. Over 80% of adsorbed proteins could be eluted with 2 M NaCl + 20% isopropanol in 20 mM sodium phosphate buffer, pH 7.0.     

Surface-initiated Atom-transfer Radical Polymerization from Polyimide Films and Their Anti-fouling Properties

A simple one-step method for the chloromethylation of polyimide (PI) under mild conditions was used to introduce benzyl chloride groups into PI film surface. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol) monomethacrylate (PEGMA) and glycidyl methacrylate (GMA) were prepared via surface initiated atom-transfer radical polymerization (ATRP) from the chloromethylated PI surfaces using benzyl chloride groups as the active ATRP initiators. A kinetics study indicated that the chain growth from the films was in agreement with a controlled process. The dormant chain ends of the grafted polymer on the PI films could reinitiate the consecutive surface-initiated ATRP to prepare surface-functionalized diblock copolymer brushes on the PI films. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS) after each modification stage. Protein adsorption experiments indicated that the PI-P(PEGMA) membrane exhibited substantially improved anti-fouling properties compared to the pristine PI surface.     

Plasma polymerization and deposition of glycidyl methacrylate on Si(100) surface for adhesion improvement with polyimide

Thin polymer films were deposited on Si(100) surfaces by plasma polymerization of glycidyl methacrylate (GMA) under different glow discharge conditions. The FT‐IR, X‐ray photoelectron spectroscopy (XPS), and amine treatment results suggested that the epoxide functional groups of the deposited films had been preserved to various extents, depending on the plasma deposition conditions. The use of a low radio frequency power (～ 5 W) and a relatively high system pressure (100–400 Pa) readily resulted in the deposition of thin films having nearly the same composition of the epoxide functional groups as that of the GMA homopolymer. The plasma‐polymerized GMA (PP‐GMA) thin films deposited on the Ar plasma‐pretreated Si(100) surfaces were retained to a large extent after acetone extraction, suggesting the presence of covalent bonding between the PP‐GMA layer and the Si surface. Thermal imidization of the poly(amic acid) precursor of polyimide on the GMA plasma‐polymerized Si(100) surface resulted in a strongly adhered polyimide film. The adhesion results further suggested that the GMA polymer had been grafted on the Si(100) surface and the epoxide functional groups had undergone reactive interaction (curing) with the carboxylic and amine groups of the poly(amic acid) during thermal imidization. Copyright © 2001 John Wiley & Sons, Ltd.     

Preparation of fully cross‐linked CNBR/PP‐g‐GMA and CNBR/PP/PP‐g‐GMA thermoplastic elastomers and their morphology,structure and properties

Binary CNBR/PP‐g‐GMA and ternary CNBR/PP/PP‐g‐GMA thermoplastic elastomers were prepared by reactive blending carboxy nitrile rubber (CNBR) powder with nanometer dimension and polypropylene functionalized with glycidyl methacrylate (PP‐g‐GMA). Morphology observation by using an atomic force microscope (AFM) and TEM revealed that the size of CNBR dispersed phase in CNBR/PP‐g‐GMA binary blends was much smaller than that of the corresponding CNBR/PP binary blends. Thermal behavior of CNBR/PP‐g‐GMA and CNBR/PP blends was studied by DSC. Comparing with the plain PP‐g‐GMA, T_c of PP‐g‐GMA in CNBR/PP‐g‐GMA blends increased about 10 °C. Both thermodynamic and kinetic effects would influence the crystallization behavior of PP‐g‐GMA in CNBR/PP‐g‐GMA blends. At a fixed content of CNBR, the apparent viscosity of the blending system increased with increasing the content of PP‐g‐GMA. FTIR spectrum verified that the improvement of miscibility of CNBR and PP‐g‐GMA was originated from the reaction between carboxy end groups of CNBR and epoxy groups of GMA grafted onto PP molecular chains. Comparing with CNBR/PP blends, the tensile strength, stress at 100% strain, and elongation at break of CNBR/PP‐g‐GMA blends were greatly improved. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1042–1052, 2004     

Surface modification of polymers. V. Biomaterial applications

Polyethylene films were surface grafted with glycidyl methacrylate (GMA) by UV irradiating the film for 5 min together with benzophenone. Poly(ethylene glycol) (PEG) was attached to the grafted surface through reaction with the epoxy groups. This yielded a surface which consisted of 95% PEG as measured with ESCA. The adsorption of human transferrin onto this film was significantly reduced as compared with a pure polyethylene film. Heparin was also reacted with a GMA grafted PE surface. ESCA showed that heparin was grafted to the surface, and in vitro blood clotting tests on the heparinized PE surface showed a reduced thrombus formation. GMA grafted polystyrene wells were reacted with carbohydrazide, to the formed carbohydrazide surface a rabbit antibody raised against mouse urinary protein (RaMUP) was covalently coupled. The RaMUP coupled surfaces was used in the detection of mouse urinary protein (MUP) at low concentrations (ca. 1 ng/mL) with an ELISA technique.     

Cellulose Functionalization via ATRP Grafting of Glycidyl Methacrylate for Cr（VI） Adsorption

Cellulose was first grafted with glycidyl methacrylate （GMA） in an ionic liquid via atom transfer radical polymerization （ATRP） and then the introduced epoxy groups were reacted with ethanediamine （EDA） to obtain an amino adsorbent. The grafting copolymer and the obtained adsorbent were characterized by FTIR, aH NMR, TEM and SEM. The results showed that the grafted copolymers had grafted polymer chains with well-controlled molecu- lar weight and polydispersity, the polymerization was a controlled system. The cellulose adsorbent had numerous micropores on the surface and showed high performance for Cr（VI） adsorption. The adsorption behavior was pH dependent and the sorption equilibrium was achieved within 2 h on the adsorbent.     

Surface modification of thermally expandable microspheres by grafting poly(glycidyl methacrylate) using ARGET ATRP

This study demonstrates the surface modification of thermally expandable core/shell microspheres by grafting glycidyl methacrylate (GMA) using activators regenerated by electron transfer (ARGET) ATRP. To retain the expansion properties it was essential to minimize the shear forces, use solvents compatible with the microspheres and keep the reaction times short (three hours or less). Using microspheres with hydroxyl groups on the surface, it was found that after converting these to α-bromo esters, GMA could be grafted by ARGET ATRP using only 50 ppm of copper catalyst in toluene at 30 °C. Decent control of the polymerization was achieved with PMDETA as ligand reaching PDIs of 1.4 for the solution polymerization of GMA. When microspheres were present, the polymerization was less controlled with higher PDIs. The epoxide groups of the grafted microspheres were hydrolyzed by HCl in THF providing a hydrophilic surface of the microsphere. The expansion property of the microspheres was studied after each reaction step by thermal mechanical analysis, and it was found that the expansion capacity was well preserved with only limited negative effect on the microspheres.     

Removal of anionic dyes with glycidyl methacrylate-grafted polyethylene terephthalate (PET) fibers modified with ethylenediamine

Research on Chemical Intermediates - In this work, the epoxy groups of poly (ethylene terephthalate) PET copolymers grafted with glycidyl methacrylate (GMA) were modified with ethylenediamine (EDA)...     

Reactive blends of thermoplastics and latex particles

Monodisperse homogeneous and core–shell latex particles of various sized between 200 and 600 nm were synthesized by emulsion copolymerization. Some of the core–shell particles were functionalized with epoxy groups at their peripheries upon introduction of glycidyl methacrylate (GMA) during the synthesis. The core consisted of crosslinked polybutylacrylate and the shell polymethylmethacrylate. Synthesis conditions at high and low temperatures were optimized to obtain coreshell particles with a well-defined morphology. The particles were characterized by quasi-elastic light scattering, scanning electron microscopy and transmission electron microscopy. The latex particles functionalized with GMA were then dispersed into a reactive matrix (styrene and maleic anhydride copolymer) using a batch mixer to obtain blends with well-defined and stabilized morphology. 4 Dimethylaminopyridine was used as a catalyst. The reaction between the epoxy groups at the particle surface and the maleic anhydride or diacid groups of the matrix was evaluated by torque and extraction techniques. A small amount of conversion generates sufficient amounts of grafted species at the matrix and particle interfaces to ensure a good interfacial adhesion.     

Controlled grafting of well-defined epoxide polymers on hydrogen-terminated silicon substrates by surface-initiated ATRP at ambient temperature

Controlled grafting of well-defined epoxide polymer brushes on the hydrogen-terminated Si(100) substrates (Si-H substrates) was carried out via the surface-initiated atom-transfer radical polymerization (ATRP) at room temperature. Thus, glycidyl methacrylate (GMA) polymer brushes were prepared by ATRP from the alpha-bromoester functionalized Si-H surface. Kinetic studies revealed a linear increase in GMA polymer (PGMA) film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The graft polymerization proceeded more rapidly in the dimethylformamide/water (DMF/H(2)O) mixed solvent medium than in DMF, leading to much thicker PGMA growth on the silicon surface in the former medium. The chemical composition of the GMA graft-polymerized silicon (Si-g-PGMA) surfaces were characterized by X-ray photoelectron spectroscopy (XPS). The fact that the epoxide functional groups of the grafted PGMA were preserved quantitatively was revealed in the reaction with ethylenediamine. The "living" character of the PGMA chain end was further ascertained by the subsequent growth of a poly(pentafluorostyrene) (PFS) block from the Si-g-PGMA surface, using the PGMA brushes as the macroinitiators.     

用原子力显微镜研究甲基丙烯酸缩水甘油酯在高密度聚乙烯表面的紫外接枝

利用AFM研究了紫外光引发甲基丙烯酸缩水甘油酯(GMA)在高密度聚乙烯(HDPE)表面接枝初期生成的接枝物的微结构, 对HDPE表面接枝反应的引发速率进行了初步研究. 紫外照射30 s后在HDPE表面形成一些接枝物微粒, 随着照射时间的增加, 微粒越来越多, 其体积也越来越大. 分析结果表明, 每一个接枝物微粒即为一个高度枝化甚至超级枝化的接枝聚合物链. 在30~45 s之间, 接枝密度随照射时间延长几乎呈线性增长; 在45 s后, 接枝密度的增长速度减慢. 在30~45 s之间的引发速度约为6.5 Unit/(μm2·s).     

Surface functionalization of multi‐walled carbon nanotubes through surface‐initiated atom transfer radical polymerization of glycidyl methacrylate

Herein, we report the fabrication of glycidyl methacrylate (GMA) polymeric conjugates of shortened multi‐walled carbon nanotubes (sMWCNT). The synthesis method involves the attachment of initiator on the surface of nanotubes followed by surface initiated atom transfer radical polymerization (SI‐ATRP) of GMA from the initiator‐bound sMWCNT surface. This is achieved by the procedure consisting of three important steps: introduction of amino groups onto the sMWCNT and attachment of polymerization initiator, 2‐bromo‐2‐methylpropinonyl bromide, and polymerization of GMA. The structure and properties of the resultant polymeric conjugates were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SEM. The FT‐IR analysis of polymeric conjugates shows infrared (IR) peaks characteristic of GMA. AFM, TEM and SEM images clearly show the formation of poly(glycidyl methacrylate)(PGMA) polymer on sMWCNT surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface modification of poly(tetrafluoroethylene) films by plasma polymerization of glycidyl methacrylate and its relevance to the electroless deposition of copper

Surface modification of poly(tetrafluoroethylene) films by plasma polymerization and deposition of glycidyl methacrylate (GMA) was carried out. The effects of glow‐discharge conditions on the chemical structure and composition of the deposited GMA polymer were analyzed by X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy. XPS and FTIR results revealed that the epoxide groups in the plasma‐polymerized GMA (pp‐GMA) layer had been preserved to various extents, depending on the plasma deposition conditions. The morphology of the modified PTFE surface was investigated by atomic force microscopy (AFM). The pp‐GMA film with well‐preserved epoxide groups was used as an adhesion promotion layer to enhance the adhesion of the electrolessly deposited copper on the PTFE film. The T‐peel adhesion test results showed that the adhesion strength between the electrolessly deposited copper and the pp‐GMA‐modified PTFE (pp‐GMA‐PTFE) film was much higher than that between the electrolessly deposited copper and the pristine or the Ar plasma‐treated PTFE film. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3498–3509, 2000     

生物基超韧聚乳酸复合材料的制备与性能

采用来源于可再生资源的聚醚酰胺弹性体（PEBA）增韧聚乳酸（PLA）制备超韧聚乳酸（PLA/PEBA-GMA）复合材料.为了提高PEBA与PLA之间的相容性,选择极性单体甲基丙烯酸缩水甘油酯（GMA）、共接枝单体乙烯基吡咯烷酮（NVP）及引发剂过氧化二异丙苯（DCP）对PEBA进行接枝改性制备PEBA-GMA.研究了接枝单体组分的用量（m/g）对PLA/PEBA-GMA复合材料性能的影响.研究发现,随着接枝单体组分用量的提高,复合材料的缺口冲击强度逐渐增大,当接枝单体组分GMA,NVP和DCP的用量分别为2.5,2.5和0.25 g时,复合材料的冲击强度高达88.6 kJ/m²,断裂伸长率为164.1%.研究表明,在熔融共混过程中,聚乳酸的端基（—OH和—COOH）与PEBA-GMA上环氧基团发生反应,有效改善两相间的界面相容性,随着接枝单体组分比例的提高,分散相PEBA-GMA的粒子尺寸逐渐减小且分布均匀.     

Styrene-assisted free radical grafting of glycidyl methacrylate onto polyethylene in the melt

Glycidyl methacrylate (GMA) is a very useful monomer as it bears an epoxy group which is capable of reacting with various other functional groups. However, its melt free radical grafting reactivity onto a polymer backbone is low. In this study, we show that the use of styrene (St) as a comonomer greatly promotes both GMA's grafting yield and grafting rate onto polyethylene (PE). It is proposed that, in the presence of St, the dominant mechanism of the free radical grafting of GMA onto PE is that St reacts first with PE secondary macroradicals and the resulting styryl macroradicals then copolymerize with GMA leading to grafted GMA. We also show that the contribution of St is not related to an improved solubility of GMA in the molten PE. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2763–2774, 1998     

Corrosion protection of iron surface modified by poly(methyl methacrylate) using surface-initiated atom transfer radical polymerization (SI-ATRP)

A new N-heterocyclic initiator N-[2-(8-heptadecenyl)-4,5-dihydro-1H-imidazole-1-ethyl]-2-bromoisobutyramide was synthesized and immobilized on the surface of iron. Methyl methacrylate was grafted from iron substrates via surface-initiated atom transfer radical polymerization (ATRP). The first-order kinetics of poly(methyl methacrylate) (PMMA) grafting from iron revealed the control of ATRP throughout the reaction, and the polymerization reached a high conversion producing polymers with good control of molecular weights (M _n?=?68,800) and low polydispersity indexes (M _w/M _n?<?1.32). The thickness of the polymer brush films was greater than 47 nm after 7 h of reaction time. The grafting density was estimated to be 0.48 chains?nm^?2. The iron surfaces at various stages of modification were characterized by scanning electron microscopy and energy dispersive spectrometer. The analytical results were consistent with a thin compact polymer coating on the surface of iron. Iron surface with grafted PMMA coating showed significant corrosion resistance. This work demonstrated that the surface-initiated ATRP is a versatile means of the surface modification of active metals with well-defined and functionalized polymer brushes.     

三醋酸纤维素膜辐射可控接枝甲基丙烯酸缩水甘油酯及其性能

三醋酸纤维素(CTA)是一种高强度的天然高分子衍生物,对其进行表面接枝改性将扩展其在物质分离、吸附、检测等领域的广泛应用,但是化学接枝改性CTA比较困难。 本文结合辐射引发接枝和可逆加成-断裂链转移(RAFT)聚合方法,成功地在CTA膜表面可控接枝了聚甲基丙烯酸缩水甘油酯(PGMA)。 研究了吸收剂量、单体GMA质量分数和RAFT试剂含量等因素对接枝率的影响,采用傅里叶变换红外光谱仪(FT-IR)、扫描电子显微镜(SEM)和接触角技术手段对CTA膜接枝前后的结构、形貌和表面性质进行了表征。 实验结果表明,为了得到较高的接枝率,同时又保持较好的形貌,合适的条件为:吸收剂量为10~12 kGy,GMA质量分数为30%,RAFT试剂与GMA的物质的量比为1：400;在不同条件下得到的最高接枝率为41%,接枝聚合物相对分子质量分布最低为1.33。 此外,接枝PGMA后的CTA膜疏水性增加。 该工作提供了可控接枝CTA的简便方法,与传统辐射接枝相比,RAFT辅助辐射接枝反应更加可控,得到的PGMA接枝链更加均匀,有利于根据实际应用来控制接枝率和进行后续的功能修饰。     

Polystyrene microspheres having epoxy functional dangling chains linked by hydrolytically stable bonds via ATRP

We report application of copper‐mediated atom transfer radical polymerization in graft copolymerization of glycidyl methacrylate (GMA) from N‐bromosulfonamide groups on polystyrene‐divinyl benzene (PS‐DVB) microspheres (210–420 μm). The surface initiator groups were introduced by simple modification of crosslinked PS‐DVB (10% mol/mol) beads in three steps: (i) chlorosulfonation, (ii) sulfamidation with propylamine, and (iii) bromination. Initiation from surface‐bound N‐bromosulfonamide groups showed first‐order kinetics (k = 1.04 × 10^?4 s^?1 in toluene at 70 °C) and gave poly(GMA) graft chains linked to the surface by hydrolytically stable sulfonamide bonds. High graft yields were attained (up to 294.4% within 21 h) while retaining the epoxy groups. Epoxy content of the resulting product (5.41 mmol g^?1) revealed an average 17 GMA repeating units in the graft per initiation site. Taking advantage of the hydrolytic stability of sulfonamide linkages and well‐known reactivity of the epoxy groups on dangling chains, “the hair‐like structure” of the polymer beads prepared can be considered when devising more efficient functional polymers as catalysts or reagent carriers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6708–6716, 2006