A DFT Study for NH3 Adsorption on the GaN （0001） Surface

1 INTRODUCTION Recently, the reaction of NH3 with III-V com- pounds[1～5] has attracted much attention, especially for the wurtzite GaN, since NH3 is the predominant raw stuff for growing crystalline GaN by both of the most important growth techniques[6～9], i.e., organo- metallic chemical vapor deposition (OMCVD) and molecular-beam epitaxy (MBE). Experimentally, Shekhar et al.[2] reported the chemisorption and reaction of hydrogen and ammonia on the single- crystalline GaN (0001…     

First-principles Calculations of H2O Adsorption Reaction on the GaN（0001） Surface

The adsorption and decomposition of H2O on GaN（0001） surface have been explored employing density functional theory （DFT）. Two distinct adsorption features of H2O on GaN（0001） corresponding to molecular adsorption and H-OH dissociative adsorption are revealed by our calculations. The activities of the surface reactions of H2O on GaN（0001） surface are investigated. For the stepwise processes of H2O decomposition into H2 in gas phase and adsorbed O atom （H2O（g）→H2O（chem）→OH（chem） ＋ H（chem）→2H（chem） ＋ O（chem）→H2（g） ＋ O（chem））, the first and second steps are facile and can even occur at room temperature; while the last two have high barriers and thus are difficult to proceed, especially the fourth step is endothermic. In short, H2O adsorption and decomposition into H2 in gas phase and adsorbed O atom on GaN（0001） surface are exothermic by -43.98 kcal/mol.     

DFT Study of Metal Atoms Adsorbed at Low-coordinated Sites of MgO （001） Surface

1 INTRODUCTION The interfaces between metals and oxide play a vital role in many industrial applications: hetero- geneous catalysis, microelectronics, thermal barriers, corrosion protection, metal processing and so on[1]. In catalysis, the choice of metal and oxide support is critical in order to obtain a desired reactivity and selectivity[2]. This is due in part to the inherent reac- tivity of the two components. Also the size and shape of the metal particle, which depend on the choice…     

Stereoselective Synthesis of （E）-α-Aryltellurenylvinyl-stannanes and Their Application in the Synthesis of Stereodefined Trisubstituted Alkenes

(E)-α-Aryltellurenylvinylstannanes have been synthesized stereoselectively via the hydrozirconation of alkynylstannanes, followed by the reactions with aryltellurenyl iodides. (E)-α-Aryltellurenylvinylstannanes can undergo sequential cross coupling reactions with both electrophiles and nucleophiles in the presence of transition metal complexes to form two carbon-carbon bonds in the same olefinic carbon leading to trisubstituted alkenes stereoselectively.     

A DFT Study of CO Adsorption on the Cu2O（111） Surface with Oxygen Vacancy

First-principles calculations based on density functional theory （DFr） and the generalized gradient approximation （GGA） have been used to study the adsorption of CO molecule on the Cu2O（111） oxygen-vacancy surface. Calculations indicate that the C-O bond is weakened upon adsorption compared with that over perfect surface. In addition, with the density increase of the defective sites, the adsorption energies of the defect-CO configuration increase whereas the C-O bond nearly remains constant.     

Theoretical Study of N_2O Adsorption and Decomposition on the InN （0001） Surface

The adsorption and decomposition of N2O on the InN (0001) surface have been explored employing density functional theory method. To study the most favorable N2O adsorption model, ten typical adsorption cases (four for the parallel style and six for the vertical style) were proposed. The calculated results indicate that the parallel models are energetically preferred over the vertical models. The parallelly adsorbed N2O prefers to be dissociated on the surface, the dissociated O atom is combined at the fcc site, and the N-N piece is desorbed from the surface and forms N2 molecules. The comparison of the density of states of InN (0001) surface before and after N2O adsorption is analyzed in detail. Through the searching for transition state of decomposition reaction, a very low energy barrier of 45.0 KJ/mol is derived.     

Spacial Structure of Cationic Phosphorus Ligand-Ru （Ⅱ） Halide Complexes-by DFT Study

The full-parameter geometry optimization of cationic （ S ） - BINAP - Ru （ Ⅱ ） halide complex was performed by DFT method using B3LYP, PW91 and PBE potentials with several basis sets. PW91 with 3-21G / SDD basis sets is found to be the most suitable method with consideration of both precision and efficiency. The dihedral angles （ θ ） of the binaphthyl or biphenyl with different phosphorus ligand - Ru （ Ⅱ ） halide complexes were found changing from 59.9 to 79.3 degree, while the natural bite angle （ βn ） of those complexes only changes from 87.4 to 90.3 degree. It is different from the common view of asymmetric organic chemists＇ that θ directly influences βn.     

A Periodic Density Functional Study on Adsorption Properties of Methoxy on Au（111） Surface

1INTRODUCTION Methoxy(CH3O)has been identified as the first intermediate in the decomposition of methanol on extensive list of clean transition metal surfaces,such as Ni(100)[1],Cu(100)[2,3],Cu(111)[4],Ag(111)[5],Au(110)[6],Pd(111)[7]and Ru(0001)[8].The electronic structure of the metal is a determining factor in OH bond scission.In fact,group IB clean surfaces have shown very low activity towards this reaction,al-though there are reports on low amounts of methoxy formed on clean Cu(…     

A DFT Study of Thiophene Adsorption on the Rh（111） Surfaces

Thiophene adsorption on the Rh(111) surfaces has been investigated by density functional theory.The results show that the adsorption at the hollow and bridge sites is the most stable.The molecular plane of the thiophene ring is distorted,the C=C bond is stretched to 1.448  and the C-C bond is shortened to 1.390.The C-H bonds tilt 22～42oaway from the surface.The calculated adsorption geometries are in reasonable agreement with population analysis and density of states.The thiophene molecule obtains 0.74 electrons,reflecting the interaction between the lone pair of sulfur and the d-orbitals of metal.The reaction paths and transition states for desulfurization of the molecule have been investigated.The bridge adsorption structure of thiophene leads to a thiol via an activated reaction with an energetic barrier of 0.30 eV.This second step is slightly difficult,and dissociation into a C4H4 fragment and a sulfur atom is possible,with an energetic barrier of 0.40 eV.     

甲醇在Ru(0001)表面吸附的密度泛函研究

采用密度泛函理论(DFT)的B3LYP方法,以原子簇Ru15为模拟表面,对甲醇在理想的Ru(0001)面三种吸附位置(top,fcc,hcp)的吸附模型进行了几何构型优化,能量计算,Mu lliken布局分析以及振动频率计算,结果表明顶位为最有利的吸附位.这些变化与实验观察到的甲醇在过渡金属表面解离的结果相一致.同时通过对吸附过程的分析推测其可能的解离途径.     

非合成气法烯烃、炔烃氢甲酰化研究进展

烯烃、炔烃的氢甲酰化反应是制备醛及其衍生物的重要反应,传统的过渡金属催化合成气(CO/H2)合成法,因为价格低廉,工艺成熟,在工业上得到了广泛应用.然而合成气的高毒性、高危性限制了它的实验室研究,因此使用非合成气的氢甲酰化反应吸引了化学家的研究兴趣.采用非一氧化碳(CO)为羰基源的新型氢甲酰化研究发展迅速,我们对该领域...     

氢原子在Ti(0001)表面吸附的密度泛函理论研究

用密度泛函理论研究了氢原子的污染对于Ti(0001)表面结构的影响. 通过PAW总能计算研究了p(1×1)、p(1×2)、3^1/2×3^1/2R30[deg]和p(2×2)等几种氢原子覆盖度下的吸附结构, 以及在上述结构下Ti(0001)面fcc格点和hcp格点的氢原子吸附. 结果表明, 在p(1×1)-H、p(1×2)-H、3^1/2×3^1/2R30[deg]-H和p(2×2)-H几种H原子覆盖度下, 以p(1×1)-H结构的单个氢原子吸附能为最大. 在p(1×1)-H吸附结构下, 由于氢原子吸附导致的Ti(0001)表面Ti原子层收缩的理论计算数值分别为-2.85%(hcp吸附)和-4.31%(fcc吸附), 因此实际上最有可能的情况是两种吸附方式都有一定的几率. 而实验中观察到的所谓“清洁”Ti(0001)表面实际上是有少量氢原子污染的表面. 不同覆盖度和氢分压下, 氢原子吸附的污染对Ti(0001)表面结构有极大的影响, 其表面的各种特性都会随覆盖度的不同而产生相应的变化.     

氢原子在Ru(0001)表面的化学吸附

用密度泛函理论研究了氢原子的污染对于Ru(0001)表面结构的影响. 通过PAW(projector-augmented wave)总能计算研究了p(1×1)、p(1×2)、(3^(1/2)×3^(1/2))R30°和p(2×2)等几种氢原子覆盖度下的吸附结构, 以及在上述结构下Ru(0001)面fcc(面心立方)格点和hcp(六方密堆)格点的氢原子吸附. 所得结果表明, 在p(1×1)-H、p(1×2)-H、(3^(1/2)×3^(1/2))R30°-H和p(2×2)-H几种H原子覆盖度下, 以p(1×1)-H结构单个氢原子吸附能为最大. 在p(1×1)-H吸附结构下,由于氢原子吸附导致的Ru(0001) 表面第一层Ru 原子收缩的理论计算数值分别为-1.11%(hcp 吸附)和-1.55%(fcc 吸附), 因此实际上最有可能的情况是两种吸附方式都有一定的几率. 而实验中观察到的“清洁”Ru(0001)表面实际上是有少量氢原子污染的表面. 不同覆盖度和氢分压下氢原子吸附的污染对Ru(0001)表面结构有极大的影响,其表面的各种特性都会随覆盖度的不同而产生相应的变化.     

The First-principles Calculations of H2S Adsorption and Decomposition on the ZnO（0001） Surface

The adsorption and decomposition of H2S on the ZnO(0001) surface have been investigated with first-principles calculations.The results reveal that H2S is dissociatively adsorbed on the clean ZnO(0001) surface to generate HS-and hydrogen species.To our interest,as indicated by Mulliken charge and density of states of the configuration calculation,the bonding mechanism of H2S on the ZnO(0001) surface can involve the donation of charge from the "s lone pairs" into the surface and the back donation of surface electrons to H2S.Therefore,the electrons should play an important role in decomposition.Furthermore,the reactivity of H2S adsorption and further thermal decomposition reactions on the ZnO(0001) surface have also been discussed by calculating the possible reaction pathways.As expected,H2 will be easily generated during the decomposition process.     

氢原子在Be(0001)表面吸附的密度泛函理论研究

采用第一性原理的密度泛函理论研究单个氢原子和多个氢原子在Be(0001)表面吸附性质.给出了氢吸附Be(0001)薄膜表面的原子结构、吸附能、饱和度、功函数、偶极修正等特性参数.同时也讨论了相关吸附性质与氢原子覆盖度(0.06-1.33ML)的关系.计算结果表明:氢原子的吸附位置与覆盖度之间有强烈的依赖关系,覆盖度低于0.67ML时,氢原子能量上易于占据fcc或hcp的中空位置;覆盖度为0.78ML时,中空位与桥位为氢原子的最佳吸附位;覆盖度在0.89到1.00ML时,桥位是氢原子吸附能量最有利的位置;以上覆盖度中Be(0001)表面最外层铍原子的结构均没有发生明显变化.当覆盖度为1.11-1.33ML,高覆盖度下Be(0001)表面的最外层铍原子部分发生膨胀,近邻氢原子渗入到铍表面次层,氢原子易于占据在hcp和桥位.吸附结构中的氢原子比氢分子中的原子稳定.当覆盖度大1.33ML时,计算结果没有发现相对于氢分子更稳定的吸氢结构.同时从分析偶极修正和氢原子吸附垂直高度随覆盖度的变化关系判断氢覆盖度为1.33ML时,在Be(0001)表面吸附达到饱和.     

CO和H在Pt/WC(0001)表面的吸附

采用密度泛函理论(DFT)和周期平板模型,研究两种WC(0001)表面的几何结构和表面能,并对Pt原子单层(PtML)在两种WC(0001)表面的高对称性吸附位上的吸附能和分离功进行计算.结果发现,终止于W原子的WC(0001)为最稳定的WC(0001)表面,Pt原子单层以hcp位的方式吸附于W终止的WC(0001)表面是PtML/WC(0001)体系最稳定的几何构型.在此基础上研究了CO分子和H原子分别在PtML/WC(0001)表面和具有相似表面结构的Pt(111)表面的吸附行为.在0.25 ML(monolayer)低覆盖度下,与在Pt(111)表面相比,在PtML/WC(0001)表面上的Pt—C间距明显拉长和CO分子吸附能减少,说明PtML/WC(0001)表面抗CO中毒能力比Pt(111)表面高;态密度分析进一步解释了CO分子与不同表面Pt原子的成键机理.在同一覆盖度下,H原子在PtML/WC(0001)表面的最大吸附能等于甚至略高于在Pt(111)表面的,表明Pt/WC对氢气氧化反应具有良好的催化活性,是一种很有前途的质子交换膜燃料电池(PEMFC)阳极催化剂.     

Photocatalytic Dissociation of CH3OH on ZnO(0001) Surface

Photocatalysis of CH₃OH on the ZnO(0001) surface has been investigated by using temperature-programmed desorption (TPD) method with a 266 nm laser light. TPD results show that part of the CH₃OH adsorbed on ZnO(0001) surface are in molecular form, while others are dissociated. The thermal reaction products of H₂, CH₃^·, H₂O, CO, CH₂O, CO₂ and CH₃OH have been detected. Experiments with the UV laser light indicate that the irradiation can promote the dissociation of CH₃OH/CH₃O^· to form CH₂O, which can be future converted to HCOO^- during heating or illumination. The reaction between CH₃OH_Znand OH_ad can form the H₂O molecule at the Zn site. Both temperature and illumination promote the desorption of CH₃^· from CH₃O^·. The research provides a new insight into the photocatalytic reaction mechanism of CH3OH on ZnO(0001).     

Selenide‐Catalyzed Stereoselective Construction of Tetrasubstituted Trifluoromethylthiolated Alkenes with Alkynes

The efficient regio‐ and stereoselective construction of tetrasubstituted alkenes is challenging and very important. For this purpose, we have developed an efficient approach to synthesize tetrasubstituted trifluoromethylthiolated alkenes from simple alkynes in excellent regio‐ and stereoselectivities by selenide‐catalyzed multicomponent coupling. Using this method, trifluoromethylthiolated alkenyl triflates and arenes were achieved. In particular, the triflates could be further converted into carbofunctionalized alkenes by palladium‐catalyzed cross‐coupling reactions. Our method provides a new pathway for the construction of trifluoromethylthiolated tricarboalkenes. This work presents the first example of selenide‐catalyzed trifluoromethylthiolation of alkynes and enables the challenging functionalizations of alkynes.