Electrocatalytic determination of hydroquinone with Mn+ modified gold-5-amino-2-mercaptobenzimidazole self-assembled monolayer electrodes

Application of immobilized metal cations on the topside of gold-5-amino-2-mercaptobenzimidazole self-assembled monolayer (Au-5A2MBI-Mⁿ⁺ SAM, Mⁿ⁺:Cu²⁺ or Ag⁺) for electrocatalytic determination of hydroquinone (H₂Q) is described by voltammetric method. Several parameters were investigated to evaluate the performance of the sensors. Calibration curves for H₂Q concentrations were linear from 1.0 × 10^-5 to 4.0 × 10^-4 M (r = 0.998) for Au-5A2MBI, from 1.0 × 10^-5 to 6.0 × 10^-4 M (r = 0.998) for Au-5A2MBI-Cu²⁺, and from 2.0 × 10^-6 to 2.0 × 10^-5 M (r = 0.996) and 1.0 × 10^-4 to 1.0 × 10^-3 M (r = 0.991) for Au-5A2MBI-Ag⁺ SAM modified electrode. The respective detection limits were found as 6.5 × 10^-6, 4.6 × 10^-6 and 1.8 × 10^-7 M. Both Cu²⁺ and Ag⁺ ions were found to have a good electrocatalytic effect on the oxidation of H₂Q; however, Ag⁺ was a more effective catalyst and showed better sensitivity and lower detection limit than all other tested electrodes. Au-5A2MBI-Ag⁺ SAM electrode was used as a suitable sensor for determination of H₂Q in a radiolysis developing agent as real sample. The results obtained by using proposed sensor and that obtained by an ASTM reference method were in good agreement at the 95% confidence level.     

Study of Fluorescence System of Gmanylic Acid-Tb3+ and the Determination of Gmanylic Acid

Abstract

It was found that gmanylic acid (GMP) can be selectively completed with Tb³⁺ at pH 6.0-6.6, which then emits strong fluorescence characteristic of Tb³⁺. This reaction can be used for the determination of GMP in presence of adenylic acid (AMP), uridylic acid (UMP) and cylidylic acid (CMP). A linear relationship is obtained between the fluorescence intensity and GMP concentration in the range of 2.0×10^?7 - 1.0×10^?4M. The detection limit is 2.0×10^?8 M. The results showed that the composition ratio and apparent stability constant of GMP-Tb complex were 1:1 for GMP Tb³⁺- and 2.3×10^?5, respectively.     

Flow-Injection Spectrophotometric Determination of Oxalate,Citrate and Tartrate Based on Photochemical Reactions

Abstract

A flow-injection configuration for the spectrophotometric determination of oxalate, citrate and tartrate is proposed. The procedure is based on the photochemical decomposition of the complexes formed between iron(III) and these anions. The iron(II) produced in the photochemical reactions was detected by measuring the absorbance after complexation with ferrozine (λ_max=562 nm). Linear calibration graphs were obtained over the concentration ranges 5.0 × 10^?6 - 1.0 × 10^?4 M, 8 × 10^?6 - 1.8 × 10^?4 M and 1.0 × 10^?6 - 2 × 10^?5 M for oxalate, citrate and tartrate, respectively. The relative standard deviations at the 1x10^?5 M concentration level were within the range 1.29 - 1.47 %. The sampling frequency was about 40 samples h^?1. The usefulness of the method was tested in the determination of oxalate in urine and spinach, of citrate in pharmaceuticals and soft drinks and of tartrate in pharmaceuticals. For the determination of oxalate in urine samples a prior separation of the analyte by precipitation with calcium chloride is recommended.     

Electrochemical and Spectral Behaviour of a New Cardiotonic Drug (Sulmazole)

Abstract

Spectrophotometric and electrochemical properties of sulmazole are studied. The acid-base constants are calculated (pk_a1 = 3.88 ± 0.04 and pK_a2 = 11.39 ± 0.06).

The drug can be spectrophotometrically determined between 4.01 × 10^?5 M and 4.02 × 10^?6 M at 327 nm with relative errors lower than 0.4 % and relative standard deviations lower than 2.0 %.

The electrochemical reduction of sulmazole was investigated by DCT, DP polarography and cyclic voltammetry. Reduction of the drug was carried out in two irreversible steps using Britton-Robinson bu ffer (pH < 7). Half-wave potentials for 1.53 × 10^?4 M sulmazole at pH 2.5 are -0.825 V and -0.995 V (versus Ag/AgCl/3M KC1).

Two different methods for determination of sulmazole in tablets are proposed.     

Electrochemical study of vinylsulphone azo dye Reactive Black 5 and its determination at a glassy carbon electrode

The electrochemical oxidation of vinylsulphone azo dye, Reactive Black 5 (RB5), at a glassy carbon electrode has been carried out in phosphate buffer solutions in the pH range 2.85?C11.79 employing cyclic voltammetry (CV) and differential pulse voltammetry (DPV). RB5 showed one well-defined oxidation peak at 0.560 V vs. Ag-AgCl using DPV. The oxidation process was shown to be irreversible over the pH range 2.85?C8.39 and was diffusion controlled. The linear relationship between the peak current height and RB5 concentrations allowed the differential pulse voltammetric determination of the dye over a wide concentration range, from 6.0 × 10^?7 to 1.5 × 10^?6 M with a detection limit of 4.0 × 10^?7 M. The precision and recovery did not exceed 4.9 and 98.2%, respectively. A UV-Vis spectrophotometry method was also proposed for the determination of the RB5 in concentration range from 5.0 × 10^?6 M to 1.0 × 10^?5 M at ??_max = 600 nm with limit of detection of 4.7 × 10^?6 M and RSD of 1.8% for RB5 concentration of 1.0 × 10^?5 M.     

Sensitive spectrophotometric detection of dopamine,levodopa and adrenaline using surface plasmon resonance band of silver nanoparticles

A simple and effective procedure is proposed for spectrophotometric determination of catecholamines; Dopamine (1), L-Dopa (2) and Adrenaline (3). It was found that the reduction of Ag⁺ to silver nanoparticles (Ag-NPs) by these catecholamines in the presence of polyvinylpyrrolidone (PVP) as a stabilizing agent produced very intense surface plasmon resonance peak of Ag-NPs. The plasmon absorbance of the Ag-NPs allows the quantitative spectrophotometric detection of the catecholamines. The calibration curves derived from the changes in absorbance at λ = 440 nm were linear with concentration of Dopamine, Levodopa and Adrenaline in the range of 3.2×10^?6? 2.0×10^?5 M, 1.6×10^?7 ? 1.0×10^?5 M, 1.5×10^?6? 4.0×10^?5 M, respectively. The detection limits (3σ) were 1.2×10^?6 M, 8.6 ×10^?8 M, 9.7 ×10^?7 M for the Dopamine, L-Dopa and Adrenaline, respectively. The method was applied successfully to the determination of catecholamines in Ringer’s injection serum.     

Simultaneous Determination of Platinum and Palladium by Second Derivative Spectrophotometry Using 3-(2'-Thiazolylazo)-2, 6-Diaminopyridine as Chromophore Ligand

ABSTRACT

A second derivative spectrophotometric method has been developed for the determination of palladium and platinum in mixtures. The method is based on the formation of the platinum and palladium complexes with 3-(2-thiazolylazo)-2, 6-diaminopyridine, (2, 6-TADAP), in the presence of 1.7 M perchloric acid solution, upon heating at 90° C for 30 min and on the subsequent direct derivative spectrophotometric measurement. The zero-crossing approach and the graphic method were used for determination of platinum and palladium, respectively. Each analyte was determinated in the presence of one another in the ranges 8.9×10^-7 -3.1×10^-5 M for platinum and 4.6×10^-7 - 6.8×10^-5 M, for palladium. The detection limits achieved (3a) were found to be 2.7×10^-7 M of platinum and 1.4×10^-7 M of palladium. The relative standard deviations were in all instances less than 1.0%. In this work is included a study of effect of interferents and the application of the proposed method in synthetic mixtures.     

Electrophoretic and gas-chromatographic analysis of an Afobazol pharmaceutical preparation

Procedures for determining 5-ethoxy-2-[2-(morpholino)ethylthio]benzimidazole dihydrochloride, an active component of the Afobazol medicinal preparation, and its potential impurities, 5-ethoxybenzimidazol-2-thione and N-(2-chloroethyl)morpholine hydrochloride by capillary zone electrophoresis in the range 2.0 × 10^?5 to 2.0 × 10^?3 M and ligand-exchange capillary electrophoresis in the range 1.0 × 10^?5 to 5.0 × 10^?3 M are developed. The optimum conditions for the separation and determination of these analytes using a quartz capillary tube are found. The reliability of the results obtained by capillary electrophoresis was confirmed by gas chromatography with a mass-selective detector.     

Spectrophotometric and spectrofluorimetric determination of iodide by extraction of ICl−2 with rhodamine B

Iodide is determined after oxidation with nitrous acid in 5 M hydrochloric acid to ICl^?₂. The ion-pair formed with rhodamine B is extracted into toluene and measured spectrophotometrically (0.5–5 × 10^?5 M) or spectrofluorimetrically (1–10 × 10^?6 M). The relative standard deviations were 1.8% for the determination of 5 × 10^?6 M iodide (n = 5) by spectrofluorimetry and 2.3% (n = 50) for 1 × 10^?5 M iodide by spectrophotometry. Periodate, iodate and iodine responded exactly as iodide.     

Amperometric Biosensor for the Determination of Phenols Using a Crude Extract of Sweet Potato (Ipomoea Batatas (L.) Lam.)

Abstract

An amperometric biosensor for the determination of phenols is proposed using a crude extract of sweet potato (Ipomoea batatas (L.) Lam.) as an enzymatic source of polyphenol oxidase (PPO; tyrosinase; catechol oxidase; EC 1.14.18.1). The biosensor is constructed by the immobilization of sweet potato crude extract with glutaraldehyde and bovine serum albumin onto an oxygen membrane. This biosensor provides a linear response for catechol, pyrogallol, phenol and p-cresol in the concentration ranges of 2.0×10^?5-4.3×10^?4mol L^?1, 2.0×10^?5-4.3×10^?4 mol L^?1, 2.0×10^?5-4.5×10^?4 mol L^?1 and 2.0×10^?5-4.5×10^?4mol L^?1, respectively. The response time was about 3–5 min for the useful response range, and the lifetime of this electrode was excellent for fifteen days (over 220 determinations for each enzymatic membrane). Application of this biosensor for the determination of phenols in industrial wastewaters is presented.     

Enzymatic inhibition enthalpimetry: The analytical potential of the inhibitory action of a series of physiologically active alkaloids on the activity of serum cholinesterase

A kinetic method is described for the enthalpimetric determination of a series of physiologically active alkaloids based on their inhibitory effect on the cholinesterase-catalysed hydrolysis of butyrylcholine iodide. All analyses are done at pH 8.0 and at 25.0°C (short term stability ± 0.002°C). Precision (< 3.0%) data are reported for the determination of physostigmine sulphate (1.0–4.0 × 10^-8), quinine sulphate (1.0 × 10^-6–4.0 × 10^-5), procaine hydrochloride (1.0 × 10^-5–× 2.5 × 10^-4), atropine sulphate (5.0 × 10^-5–3.0 × 10^-4), morphine sulphate (1.0–8.0 × 10^-4), codeine phosphate (3.0 × 10^-4–2.4 × 10^-3), pilocarpine nitrate (5.0 × 10^-4––6.0 × 10^-3) and thiamine hydrochloride (1.0–5.0 × 10^-3); the linear response ranges in mol dm^-3 are given in parentheses. Complete inhibition curves are presented and relative “potency” is inferred. The effects of several interfering inhibitors are discussed.     

FDU-15-Pt composites with different Pt loading and their electrocatalytic reduction to ultratrace nitroaromatic compounds

FDU-15 is a hexagonal mesoporous material with nanometer-sized, highly ordered arrays and large special surface area. In this work, FDU-15-Pt with 2.0%, 5.0% and 8.0% Pt loading were synthesised and used for electrochemical detection of trace nitroaromatic compounds (NACs). The FDU-15-Pt samples were characterised by CO Chemisorption, transmission electron microscopy (TEM) and X-ray diffraction (XRD). It has been demonstrated that FDU-15-Pt with 2.0% Pt loading has the smallest Pt particle size of 2.9?nm, highest Pt metal dispersion of 37.7% and largest Pt metal surface area of 21.36?m^2?g^?1. The FDU-15-Pt/PDDA modified electrode were assembled by electrostatic adsorption of Poly (diallyldimethylammonium chloride) (PDDA) and FDU-15-Pt. The 2.0% FDU-15-Pt modified sensor showed higher selectivity for NACs than those of 5.0% and 8.0% FDU-15-Pt, which were verified by electrochemical experiments. A linear response over TNT concentration ranging from 8.8?×?10^?9?M to 1.2?×?10^?5 M was exhibited with a low detection limit of 2.9?×?10^?9?M (S/N?=?3). Moreover, the proposed 2.0% FDU-15-Pt/PDDA modified sensor has been applied to the detection of NACs in spiked environmental water samples and shows promise for fast and accurate determination of trace NACs in real samples.     

Development of a voltammetric method of analysis using praseodymium oxide-carbon nanotubes for the sensitive detection of dopamine in the presence of tramadol,paracetamol and ascorbic acid

A sensitive and selective method of analysis was constructed by the the combination of praseodymium oxide and carbon nanotubes. The charge transfer resistance (Rct) values of 109 in 1 × 10⁻³ M K₃[Fe(CN)₆] and 79 Ω in 5 × 10⁻⁶ M dopamine indicate that Pr₆O₁₁@MWCNTs/GCE enables an excellent electron pathway between electrolyte and electrode. The platform was successfully applied for the determination of dopamine in the presence of tramadol, paracetamol and ascorbic acid. The platform exhibited a remarkable decrease in ▵Ep for DA. A dynamic linear range from 1.2 × 10⁻⁹ M to 1.8 × 10⁻⁵ M was obtained with an LOD of 1.0 × 10⁻¹⁰ M. Such a sensitive and selective method of analysis makes Pr₆O₁₁@MWCNTs/GCE of high interest to observe trace level of DA with good accuracy and precision.     

Selective detection of dopamine with poly(diphenylamine sulfonic acid) modified electrode in the presence of ascorbic acid

A glassy carbon electrode was modified with electropolymerized film of diphenylamine sulfonic acid (DPASA). Electropolymerization was performed by cyclic voltammetry in 0.1 M KCl solution. The modified electrode showed an excellent electrocatalytic effect towards oxidation of dopamine (DA) and ascorbic acid (AA). Electrostatic interaction between the negatively charged poly(DPASA) film and either cationic DA species or anionic AA species favorably contributed to the redox response of DA and AA. Anodic peaks of DA and AA in their mixture were well separated by ca 168 and −11.8 mV. The proposed modified electrode was utilized for selective determination of dopamine in the concentration range of 5.0 × 10^t7–2.0 × 10⁻⁵ M in the presence of high concentration of ascorbic acid. Detection limit was 6.5 × 10⁻⁹ M.     

Spectrofluorimetric Flow Injection Determination of Glycerol & Ethylene Glycol with Alizarin Navy Blue

ABSTRACT

A simple and accurate procedure for indirect spectrofluorimetric determination of glycerol and ethylene glycol in aqueous media was developed. Alizarin Navy Blue can be oxidized by potassium periodate to produce a fluorescent compound, that can be detected fluorimetrically (λ_ex = 370 nm, λ_em = 516 nm) by a flow through method. Glycerol and ethylene glycol react with periodate decreasing its concentration and thus the forming the basis for an indirect determination of these compounds. The influence of acid concentration, reagent concentration and manifold variables were studied. For glycerol and ethylene glycol linear calibration curves were obtained in the ranges of 4.8 × 10^-7 – 8.7 × 10^-5 M and 6.4 × 10^-7 – 8.7 × 10^-5 M, respectively. The limit of detection (defined as the concentration that gives a signal three times the standard deviation of the background signal) for glycerol and ethylene glycol was 3.2 × 10^-7 M and 4.3 × 10^-7 M, respectively. The proposed method was applied for determination of glycerol and ethylene glycol in synthetic and real samples. The results obtained were satisfactory.     

A Selective Fluorimetric Method for the Determination of Some β-Lactamic AntibioticsSupported by Natural Science Foundations of China and Shandong province

Abstract

Based on the reaction between acetylacetone-formaldehyde and β-lactamic antibiotics at pH=4.0, in which product can emit strong fluorescence, a selective simple fluorimetric method is described for the determination of both α-aminocephalosporins (namely cepharadine and cefalexin) and 6-aminopenicillanic acid (6-APA) in pure form and in pharmaceutical form. Other β-lactamic antibiotics free from α-amino group do not interfere with the assay. The linear ranges are 1.0×10^?4-8.0×10^?2 mg/ml, 2.0×10^?4-3.0×10^?2 mg/ml and 3.0×10^?4-2.0×10^?2mg/ml for cepharadine, cefalexin and 6-APA, respectively. Their detection limits (S/N=3) are 3.0×10^?5mg/ml, 4.0×10^?5mg/ml and 6.0×10^?5mg/ml.     

Analytical Properties of 4, 4′-Biazobenzenediazoaminobenzene and its Applications in Spectrophotometry

Abstract

The spectral characteristics and analytical properties of 4, 4′-Biazobenzenediazoaminobenzene as a new chromogenic reagent have been described and the optimum conditions for reaction with eight metal ions are presented. In the presence of Triton X-100 and sodium tetraborate solution, the reagent can be used for the determination of Hg, Ni, Cd. The molar absorptivities are 1.8×10⁵ l.mol^?1. cm^?1 at 515 nm for mercury, 2.0×10⁵ l.mol^?1. cm^?1 at 540 nm for nickel, and 1.8×10⁵ l.mol^?1.cm^?1 at 526 nm for cadmium. The recommended procedure has been used for the spectrophotometric determination of cadmium in waste water.     

Spectrophotometric determination of nickel(II) in different samples by complexation with some triazolylazo dyes

A new sensitive spectrophotometric method for the determination of nickel(II) with 3-(2-hydroxy-5-acetyl-(L¹),-5-ethoxycarbonyl-(L²),-5-methyl-(L³),-5-formyl-(L⁴),-5-bromophen-1-ylazo)-1,2,4-triazole (L⁵), and 3-(2,4-dihydroxyphen-1-ylazo)-1,2,4-triazole (L⁶) in aqueous media containing 40 vol. % methanol has been developed. The method is based on the formation of stable coloured Ni(II) complexes with stoichiometric ratios 1: 1 and 1: 2 (n(M): n(L)). Linear calibration graphs are obtained up to 7.04 μg cm⁻³ of nickel(II) under optimum conditions attained from investigation of complex formation. The absorption maxima varied from 485 nm to 545 nm and the molar absorptivities ranged from 0.84 × 10⁴ to 4.65 × 10⁴ dm³ mol⁻¹ cm⁻¹ for 1: 1 and 1: 2 (n(M): n(L)) complexes with varying the substituent on the phenolic ring. The optimum ranges for the direct determination of nickel(II) (Ringbom) and the stability constants of the formed complexes are determined. The developed method was applied to the spectrophotometric determination of nickel(II) in some samples with satisfactory results.     

Rapid Method for the Micro-Determination of Hydrazine by Amperometric Titration With Potassium Iodate

Abstract

An amperometric method, with potassium iodate as the titrant, for the rapid and precise determination of micro amounts of hydrazine salts is described. Hydrazine dihydrochloride, hydrazine sulfate and hydrazine hydrate could be quantitatively analyzed at the concentration range of 4 × 10^?7 -4×10^?3 M in the presence of 5 M hydrochloric acid. Hydrazine salts, 2×10^?4 -4×10^?3 M, were titrated in 5 minutes with a relative error and a relative standard deviation of 0.1%. It was also found that hydrazine dihydrochloride can be precisely determined, without any interference, even in the presence of hydroxylamine which is ten times as much as the former.

The suitable applied potential between the rotating platinum indicator microelectrode and the silver plate-silver chloride reference electrode was + 0.7V.     

A Fluorescence Quenching Method for the Determination of Chromium(VI) with L-Tyrosine

Abstract

A fluorescence quenching method for the determination of Cr(VI) in aqueous solution is described. The fluorescence intensity of the system is linear ever the range 5×10^?6 - 1.0×10^?4 M Cr(VI). The method has been applied to the determination of Cr(VI) In cast iron and waste water.