Calculation of layered structures by the semianalytic method of finite elements

A semianalytic method of finite elements is developed for calculating layered composite structures. The variables are separated on the basis of the Reissner variation principle. A number of plate deformation problems are solved, and a comparison with the known solutions is made. The method can be efficient when dealing with research, as well as engineering, problems.Ukrainian Transport University, Kiev, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 33, No. 6, pp. 781–785, November–December, 1997.     

Sum of Cantor sets: Self-similarity and measure

In this note it is shown that the sum of two homogeneous Cantor sets is often a uniformly contracting self-similar set and it is given a sufficient condition for such a set to be of Lebesgue measure zero (in fact, of Hausdorff dimension less than one and positive Hausdorff measure at this dimension).

     

Skill map based knowledge structures: some considerations about their identifiability

In this article identification of skill multi map based knowledge structures is studied. It is shown how some possible modifications to the skill map may lead the probabilistic knowledge structure to be not identifiable. More specifically, we refer to particular modifications such as adding skills, or adding competencies for an item q. We demonstrate how these changes in the skill map lead the derived knowledge structure to be backward-graded or forward-graded respectively, and how these two particular kinds of structures are not identifiable.     

Design of anisotropic structures: Calculation,optimization, and tests

Conclusions A computational procedure based on a limiting state has been worked out which proposes the performance of tests of samples, small-scale models, and full-scale structures and a statistical analysis of the experimental data. Advantages of the method are shown in comparison with the computational method based on fracturing loads which pertain to estimating the accuracy of the computational scheme of structures and determining their safety coefficients. An optimality criterion is formulated within the framework of the method which is related to ensuring a maximum of the limiting (fracturing or critical) load with a constant mass of the structure.Applications of the method are given to estimation of the strength and stability of structures made out of polymeric and metal CM with the use of the Gol'denblat-Kopnov criterion and solutions based on linear shell theory. The conditions for realization of the optimality criterion of structures are determined. Recommendations are made for the rational reinforcement of structures made out of filamentary CM, and a procedure is proposed for the rational design of reinforced structures.As an example of the tests for stability of cylindrical shells made out of aluminum-magnesium alloy under external pressure, the legitimacy of the cause of the disagreement between the calculated and experimental critical loads, which consists of a discrepancy in the nature of wave formation at the instant of stability loss and initial imperfections, and the effectiveness of the computational method based on a limiting state are confirmed. Refined computational formulas for the critical loads of cylindrical shells made out of fiberglass, carbon fiber, and boraluminum under typical kinds of loading are proposed within the framework of the method and on the basis of an analysis of the results of tests, and a comparison is made of the effectiveness of the reinforcement of shells made out of aluminum-magnesium alloy and carbon fiber. The values of the safety coefficients of structures which guarantee their reliability are determined.Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 262–271, March–April, 1980.     

A new lattice hierarchy: Hamiltonian structures,symplectic map and N-fold Darboux transformation

A new lattice hierarchy is constructed from a discrete matrix spectral problem. By the Tu scheme technique, the associated Hamiltonian structures and infinitely many conservation laws of this hierarchy are derived. Then a symplectic map is proposed based on the Lax pair and the adjoint Lax pair. Furthermore, the N-fold Darboux transformation and explicitly exact solutions of the first two equations in the hierarchy are investigated. Finally, the density profiles of these exact solutions are presented to illustrate the overtaking collisions of solitary waves.     

Self-similarity in inverse limit spaces of the tent family

Taking inverse limits of the one-parameter family of tent maps of the interval generates a one-parameter family of inverse limit spaces. We prove that, for a dense set of parameters, these spaces are locally, at most points, the product of a Cantor set and an arc. On the other hand, we show that there is a dense set of parameters for which the corresponding space has the property that each neighborhood in the space contains homeomorphic copies of every inverse limit of a tent map.

     

Calculation of composite structures subjected to follower loads by using a geometrically exact shell element

Based on a 7-parameter shell model, a numerical algorithm has been developed for solving the geometrically nonlinear problem of a multilayer composite shell subjected to a follower pressure and undergoing large displacements and rotations. As unknowns, six displacements of the outer surfaces and addition ally the transverse displacement of midsurface of the shell are chosen. This allows one to use the Green–Lagrange strain tensor, introduced earlier by the authors, which exactly represents arbitrarily large rigid-body displacements of the shell in curvilinear coordinates of a reference surface. A geometrically exact solid shell element is formulated, which permits one to solve the nonlinear deformation problem for thin-walled composite structures subjected to a follower pressure by using a very small number of load steps.     

Improving the network robustness against cascading failures by adding links

In this paper, we explore the network robustness against cascading failures by adding links to the underlying network structure. Three link-adding strategies are compared, including random linking strategy (RLS), high-betweenness linking strategy (HBS), and low-polarization linking strategy (LPS). It is found that HBS is more effective than RLS to enhance the network robustness against cascades while the network exhibits the strongest robustness under LPS. Moreover, the effect of the total cost of link-adding is investigated. As the total cost grows, the advantage of LPS becomes more evident. Our work would be helpful for the design of networked systems.     

Modelling by a planar map: Lyapunov-type numbers in the presence of spiral points

Lyapunov-type numbers are usually defined for diffeomorphisms with a smooth invariant manifold. We consider here the case of a planar diffeomorphism with an invariant curve that contains spiral points. The limits defining the Lyapunov-type numbers are shown to exist. Numerical results for the delayed logistic map illustrate the analysis.     

Increasing the adhesion of polymers to metals by adding substances with conjugation systems

The electron-donor properties of polymers with conjugation systems (PCS) and their capability of forming -complexes with metals is of interest in relation to adhesion. Small amounts (0.01–0.1%) of substances with polyconjugation systems (polydiphenylbutadiene, polyphenylacetylene, and copolymers of naphthalene and anthracene with benzene) increase the adhesion between aluminum and polymers used as electrical insulation coatings (polyesters, polyimides, and their derivatives). With optimum PCS dosage, the resistance to peeling rises by 15–38%.Institute of Chemical Physics, Academy of Sciences of the USSR, Moscow. Translated from Mekhanika Polimerov, No. 2, pp. 365–367, March–April, 1974.     

BCK代数的极大元扩张

引进了 BCK代数的一种新的扩张方法——极大元扩张法 ,使得其他扩张法 ,如拟交错扩张法、有界 BCK代数的 Iseki扩张 ,都是极大元扩张法的特殊情况 .而且讨论了极大元扩张的其他性质 .     

用最少的虚工序构建等效多阶段工序网络

运用网络计划可以直观地表示项目管理中的诸多疑难问题, 便于分析和求解. 但是它也存在明显的缺点, 如, (1) 工序网络的有向无回路性表明很多时候适合运用动态规划法, 但它在通常情况下的无阶段性使得该方法无法直接应用; (2) 任意构建的工序网络容易表现得错综复杂, 不利于研究; (3) 用最少的虚工序表示双代号网络是NP-难问题, 因此对一个工序系统可能构建出多个差别迥异的工序网络, 有碍于进度计划管理研究, 等等. 如果能将工序网络构建成等效的多阶段网络, 各工序分别表示在相应的阶段中, 无疑有助于上述问题的解决. 构建等效多阶段工序网络需要添加虚工序. 通过添加最少的虚工序将工序网络构建成等效多阶段网络, 从而有助于建立更合理的工序网络表示法.     

An approach to the Gummel map by vector extrapolation methods

The numerical approximation of nonlinear partial differential equations requires the computation of large nonlinear systems, that are typically solved by iterative schemes. At each step of the iterative process, a large and sparse linear system has to be solved, and the amount of time elapsed per step grows with the dimensions of the problem. As a consequence, the convergence rate may become very slow, requiring massive cpu-time to compute the solution. In all such cases, it is important to improve the rate of convergence of the iterative scheme. This can be achieved, for instance, by vector extrapolation methods. In this work, we apply some vector extrapolation methods to the electronic device simulation to improve the rate of convergence of the family of Gummel decoupling algorithms. Furthermore, a different approach to the topological ε-algorithm is proposed and preliminary results are presented.