Natural scaffolds-inspired synthesis of CF3-substituted macrolides enabled by Rh-catalyzed C–H alkylation macrocyclization

The development of innovative strategies and methods to provide natural product-like macrocycles not accessible by biosynthesis, but endowed with novel bioactivities and simplified structure, is highly desirable. Inspired by the key scaffolds of rapamycin and FR252921, herein, we report a Rh（III）-catalyzed C–H alkylation macrocyclization, which enables access to CF3-substituted macrolides. DFT calculations reveal that the chemoselectivity between C–H alkylation and olefination macrocyclization w...     

Catalytic C–C coupling through C–H arylation of arenes or heteroarenes

The present review refers to catalytic methods to arylate arene or heteroarene compounds. The resulting compounds are ubiquitous in biology and in pharmaceuticals or fine chemicals production. Until a few decades ago they were prepared according to laborious procedures often involving a series of steps all requiring product isolation. Catalytic methods are much simpler and convenient and often consist of one-pot procedures leading to highly selective reactions. The reaction types described here encompass intermolecular as well as intramolecular reactions. Assistance by chelating groups, heteroatoms and metallacycles are considered for metal-catalyzed reactions not involving the use of oxygen or stoichiometric oxidants.     

Acidity effects of Hβ zeolite on olefin alkylation of thiophenic sulfur in gasoline

Olefin alkylation of thiophenic sulfur process was carried out in model gasoline, using Hβ zeolites with different Si/Al2 ratios as catalysts. In particular, the influence of acid properties of Hβ zeolites on its catalytic ability for the thiophene alkylation, xylene alkylation and hexene oligomerization was investigated. The results showed that the acidity of the Hβ zeolite was increased with the decrease of Si/Al2 ratio, but its catalytic ability was not always increased. In fact, it reached the maximal catalytic ability at Si/Al2 ratio of 66, and under the reaction conditions of 60 ℃, 1.5 MPa, WHSV 3.0 h-1and time on stream 2 h. At the ratio, the conversion of thiophene, xylene, and oligomerized hexene were 96.6%, 2.7% and 2.8%, respectively. An optimal Si/Al2 ratio exists for the catalytic performance of H/3 zeolite. By investigating the coke deposition of the used H/3 zeolite catalysts, it has been found that the optimal Si/Al2 ratio is attributed to the combined effect of the carbocation activation capability and the hydrogen transformation capability of the H/3 zeolite catalyst.     

Acidity effects of Hβ zeolite on olefin alkylation of thiophenic sulfur in gasoline

Olefin alkylation of thiophenic sulfur process was carried out in model gasoline, using Hβ zeolites with different Si/Al2 ratios as catalysts. In particular, the influence of acid properties of Hβ zeolites on its catalytic ability for the thiophene alkylation, xylene alkylation and hexene oligomerization was investigated. The results showed that the acidity of the Hβ zeolite was increased with the decrease of Si/Al2 ratio, but its catalytic ability was not always increased. In fact, it reached the maximal catalytic ability at Si/Al2 ratio of 66, and under the reaction conditions of 60 ℃, 1.5 MPa, WHSV 3.0 h^-1 and time on stream 2 h. At the ratio, the conversion of thiophene, xylene, and oligomerized hexene were 96.6%, 2.7% and 2.8%, respectively. An optimal Si/Al2 ratio exists for the catalytic performance of Hβ zeolite. By investigating the coke deposition of the used Hβ zeolite catalysts, it has been found that the optimal Si/Al2 ratio is attributed to the combined effect of the carbocation activation capability and the hydrogen transformation capability of the Hβ zeolite catalyst.     

C–H alkylation of pyridines with olefins catalyzed by imidazolin-2-iminato-ligated rare-earth alkyl complexes

An array of rare-earth bis(aminobenzyl) complexes supported by imidazolin-2-iminato ligands were synthesized and structurally characterized. These complexes showed high activity towards ortho-Csp²–H alkylation of 2-alkylpyridines and benzylic Csp³–H alkylation of 2,6-dialkylpyridines with alkenes. A wide range of alkyl or aryl substituted olefin substrates are compatible,providing an atom-economical route to linear or branched alkylated pyridine derivatives in moderate to h...     

Iridium pentahydride complex catalyzed formation of CC bond by CH bond activation followed by olefin insertion

The formation of carbon-carbon bond was found to occur by first carbon-hydrogen bond activation followed by olefin insertion under the catalysis of an iridium pentahydride complex.     

Ullmann-type C–N coupling reaction catalyzed by CuI/metformin

A facile and efficient method for Ullmann-type C–N coupling reaction of amine and aryl halide catalyzed by CuI/metformin in EtOH is described. The advantages of this method are the use of an inexpensive and readily available catalyst and ligand, easy workup, shorter reaction time, improved yields, and the use of green solvent. Furthermore, this procedure is applied successfully for the modification of natural products, such as Vindoline and Tabersonin.     

Electrochemical dehydrogenative N–H/N–H coupling reactions

The N–N bond is present in many important organic compounds, such as hydrazines, pyrazoles, azos, etc. Many methods based on transition metal catalyzed N–N coupling or functionalization of hydrazine have been reported for the synthesis of N–N containing organic compounds. In recent years, electrochemical dehydrogenative N–H/N–H coupling has become a powerful tool for the construction of N–N bearing organic compounds. The electrochemical methods employ electrons as traceless redox reagents instead of chemicals and produce hydrogen as the only byproduct. In this review, we summarize the recent advances in the electrochemical dehydrogenative N–H/N–H coupling reactions with focus on the mechanistic insights and synthetic applications of these transformations.     

Pd-catalyzed selective decarboxylation/C–H activation coupling of aryl acid with thiazole and oxazole directed by 1,2,3-triazole

An efficient palladium-catalyzed selective decarboxylation/C–H activation coupling of aryl acid with thiazole and oxazole under the assistance of 1,2,3-triazole ring were developed. This work provides an effective access to build functionalized 1,2,3-triazoles bearing thiazole and oxazole moieties. This method has good substrate compatibility to compose a series of selective heterocyclic compounds in moderate to good yields.     

Palladium-catalyzed asymmetric allylic C–H alkylation of 1,4-dienes and glycine Schiff bases

A highly regio-and enantioselective allylic C–H alkylation of 1,4-dienes with glycine Schiff bases has been established by chiral palladium-phosphoramidite catalysis. This reaction can proceed under mild conditions and tolerate a wide scope of 1,4-dienes,delivering structurally diverse chiral β-branched α-amino acid surrogates in moderate to high yields and with high levels of regio-, Z/E-, diastereo-and enantioselectivities.     

A synthesis of biaryl ketones via the C–S bond cleavage of thiol ester by a Cu/Ag salt

We report the synthesis of biaryl ketones via an unprecedented copper/silver catalyzed acylative cross-coupling of thiol esters with either an arylboronic acid or a potassium aryltrifluoroborate. This new method proceeds without a requisite Pd-catalyst and Cu(I)TC mediator, and is efficient, versatile, operationally simple, and accommodating functionally diverse thiol esters, arylboronic acids, and potassium aryltrifluoroborates.     

Base-promoted O-deprotonation/alkylation reaction of P(O)–OH compounds with alkyl halides

A novel base-promoted O-deprotonation/alkylation reaction of P(O)–OH compounds with alkyl halides has been developed. The protocol is practical, representing a simple way to produce a broad spectrum of functionalized phosphinates, phosphonates, and phosphates from basic starting materials with good to excellent yields. A plausible mechanism was proposed for this reaction.     

Supramolecular structures of CdX2-containing coordination compounds constructed by C–H ··· X synthons

Three CdX₂-containing (X = Cl, Br) compounds [CdBr₂(Him)₂] _n (Him = imidazole) (1), [CdCl₂(2,2′-bipy)] _n (2,2′-bipy = 2,2′-bipyridine) (2), and [CdCl₂(phen)] (phen = phenanthroline) (3) have been synthesized through hydrothermal technique. Compound 1 adopts 1-D coordination chain, which is connected to form a 3-D supramolecular network by inter-chain N–H ··· Br and C–H ··· Br hydrogen bonds. Compound 2 also adopts 1-D coordination chain, which is connected to form 3-D supramolecular network by intra- and inter-chain C–H ··· Cl hydrogen bonds; 3 is discrete, linked to form 2-D supramolecular sheets by intra- and inter-molecular C–H ··· Cl hydrogen bonds. The different volume and coordination ability of organic ligands result in the different coordination structure and supramolecular synthons. All these compounds exhibit strong fluorescence emissions at room temperature.     

Copper-catalyzed C–N coupling/C–H functionalization: A tandem approach to azole-fused quinazoline derivatives

A Cu-catalyzed tandem synthesis of azole-fused pyrimido[1,2-c]quinazolines and imidazo[1,2-c]quinazolines has been developed. The reaction is based on a C–N cross-coupling/C–H functionalization reaction of 2-(2-bromophenyl)-1,4,5,6-tetrahydropyrimidines with azoles. A variety of the desired polycyclic products were obtained in moderate to excellent yields.     

Palladium-catalyzed asymmetric allylic alkylation of indoles by C–N bond axially chiral phosphine ligands

The palladium-catalyzed asymmetric allylic alkylation of indoles with 1,3-diphenyl-2-propenyl acetate using P/N-type ligands such as N-aryl indole, C–N bond axially chiral aminophosphine (aS)-L4, gave the desired products 1 in good yields and with moderate to high enantioselectivities (up to 90% ee).     

Pd(II)-catalyzed intramolecular C–H activation/C–C cross coupling for the synthesis of carbazoles from diaryl acetamides

Pd(II)-catalyzed intramolecular C–H activation/C–C cross coupling within N,N-diphenyl-acetamides allows the efficient formation of differently substituted carbazoles. In this cross-dehydrogenative coupling, many different functional groups are tolerated and the starting material N,N-diphenyl-acetamides can be easily prepared in one step from commercially available acetanilides and iodobenzenes.     

Palladium-catalyzed ortho-C–H silylation of biaryl aldehydes using a transient directing group

A strategy for Pd-catalyzed ortho-C–H silylation of biaryl aldehydes enabled by a transient auxiliary is presented. This protocol provides a broad range of ortho-silylated biaryl aldehydes in good yields. The silyl moiety can be further functionalized under mild conditions, rendering the silylated products useful building blocks. Notably, this protocol also offers an opportunity to establish a platform for expeditious synthesis of structurally diverse axially chiral biaryl aldehydes via sequential atroposelective interannular C–H functionalization/intraanular C–H silylation.     

Simultaneous determination of phenolic compounds by means of an automated voltammetric “electronic tongue”

Zirconium(IV) selenoiodates have been synthesized under a variety of conditions. The most chemically and thermally stable sample is prepared by adding a mixture of aqueous solutions of 0.1 mol L^–1 potassium iodate and 0.1 mol L^–1 sodium selenite to aqueous solution of 0.1 mol L^–1 zirconium(IV) oxychloride. Its ion-exchange capacity for K⁺ and Pb²⁺ was found to be 3.20 and 2.35 meq g^–1 dry exchanger, respectively. The material has been characterized on the basis of chemical composition, pH titration, and thermogravimetric analysis. The effect on the exchange capacity of drying the exchanger at different temperatures has also been studied. The analytical importance of the material has been established by quantitative separation of Pb²⁺ from other metal ions.