Copper(II) triflate-catalyzed reduction of carboxylic acids to alcohols and reductive etherification of carbonyl compounds

A protocol is described for the reduction of carboxylic acids to primary alcohols using 1,1,3,3-tetramethyldisiloxane (TMDS) and a catalytic amount of Cu(OTf)₂. Aliphatic as well as aromatic carboxylic acids are reduced in high selectivity and good yields. TMDS/Cu(OTf)₂ has also been found to be an efficient catalytic reducing system for the preparation of symmetrical ethers from carbonyl compounds under mild conditions.     

Alternative method for the reduction of aromatic nitro to amine using TMDS-iron catalyst system

The system 1,1,3,3-tetramethyldisiloxane (TMDS)/Fe(acac)₃ is reported here as a new method to obtain amines from aromatic nitro compounds. Amines are synthetized in a straightforward step and are isolated as hydrochloride salts with good to excellent yields. This system has shown a good selectivity toward aryl-chloride, aryl-bromide, ester, carboxylic acid, and cyano groups.The reduction of alkylnitro compounds was unfortunately not possible using this method, only a mixture of mono and dialkylated amine was obtained.     

A simple and convenient method for preparation of carboxylic acid alkyl esters, phenolic and thioesters using chlorodiphenylphosphine/I2 and imidazole reagent system

Condensation of carboxylic acids with alcohols, phenols and thiols proceeded smoothly to afford carboxylic acid alkyl esters, phenolic esters and thioesters by using the combination of chlorodiphenylphosphine, imidazole and molecular iodine in refluxing acetonitrile. Esterification with this mixed reagent system gave the corresponding products in excellent yields. The phosphorus-containing byproduct was simply removed from the organic phase by basic aqueous workup without the need for chromatography purification.     

Phosphorus pentasulfide: A mild and versatile Catalyst/Reagent for the preparation of dithiocarboxylic esters

The reaction of carboxylic acids (1) with a variety of thiols or alcohols in the presence of phosphorus pentasulfide (P(4)S(10)) as a catalyst and reagent (20-40 mol %) proceeded effectively to afford the corresponding dithiocarboxylic esters (2) in high yields.     

Direct thioesterification from carboxylic acids and thiols catalyzed by a Brønsted acid

In the presence of a catalytic amount of trifluoromethanesulfonic acid, free carboxylic acids reacted with free thiols directly to afford the corresponding thioesters in high yields.     

Lewis acid-catalyzed ring-opening reactions of methylenecyclopropanes with alcoholic or acidic nucleophiles

[reaction: see text] Methylenecyclopropanes can react with various nucleophiles such as alcohols, phenols, carboxylic acids, and thiols to give the corresponding homoallylic esters or ethers in good yields with good stereoselectivities in the presence of Lewis acids.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Indium(III) chloride as a new, highly efficient, and versatile catalyst for acylation of phenols, thiols, alcohols, and amines

Indium(III) chloride efficiently catalyses the acylation of structurally diverse phenols, alcohols, thiols, and amines under solvent free conditions. Acid sensitive alcohols are smoothly acylated without competitive side reactions. Acylation of 2-hydroxynaphthalene is carried out with carboxylic acids adopting the mixed anhydride protocol using trifluoroacetic anhydride.     

13C NMR as a general tool for the assignment of absolute configuration

(13)C NMR, alone or in combination with (1)H NMR, allows the assignment of the absolute configuration of chiral alcohols, amines, carboxylic acids, thiols, cyanohydrins, sec,sec-diols and sec,sec-aminoalcohols, derivatized with appropriate chiral auxiliaries. This extends the assignment possibilities of NMR to fully deuterated and to nonproton containing compounds.     

Mild oxidation of tosylmethylisocyanide to tosylmethylisocyanate: utility in synthetic and medicinal chemistry

A convenient and efficient (one-step) oxidation is reported of commercially available tosylmethylisocyanide (TOSMIC) to form tosylmethylisocyanate, making this highly reactive bifunctional molecule a readily available synthetic reagent. Besides engaging in nucleophilic addition reactions with alcohols, amines, and thiols, tosylmethylisocyanate also reacts with carboxylic acids to form tosylmethylamides, which undergo substitution reactions in the presence of organocopper and organomagnesium reagents.     

Di-2-pyridyl carbonate: a new efficient coupling agent for the direct esterification of carboxylic acids

Reaction of carboxylic acids with equimolar amounts of di-2-pyridyl carbonate and alcohols or thiols in the presence of 4-dimethylamino pyridine as a catalyst in methylene chloride at room temperature affords the corresponding esters in high yields under mild conditions.     

Gold(I)‐Catalysed Direct Thioetherifications Using Allylic Alcohols: an Experimental and Computational Study

A gold(I)‐catalysed direct thioetherification reaction between allylic alcohols and thiols is presented. The reaction is generally highly regioselective (S_N2′). This dehydrative allylation procedure is very mild and atom economical, producing only water as the by‐product and avoiding any unnecessary waste/steps associated with installing a leaving or activating group on the substrate. Computational studies are presented to gain insight into the mechanism of the reaction. Calculations indicate that the regioselectivity is under equilibrium control and is ultimately dictated by the thermodynamic stability of the products.     

1,8-diazabicyclo[5.4.0]undec-7-ene (dbu): An effective base for the introduction of tbutyldimethylsilyl group in organic compounds.

Reaction of alcohols, thiols, amines, carboxylic acids, phenols, hydroquinones, ketoesters and amides with equimolecular amounts of t-butyldimethylchlorosilane and DBU, even in solvents other than dimethylformamide affords the corresponding t-butyldimethylsilyl derivatives in high yield.     

Asymmetric Ring‐Opening of Cyclopropyl Ketones with Thiol,Alcohol, and Carboxylic Acid Nucleophiles Catalyzed by a Chiral N,N′‐Dioxide–Scandium(III) Complex

A highly efficient asymmetric ring‐opening reaction of cyclopropyl ketones with a broad range of thiols, alcohols and carboxylic acids has been first realized by using a chiral N,N′‐dioxide–scandium(III) complex as catalyst. The corresponding sulfides, ethers, and esters were obtained in up to 99 % yield and 95 % ee. This is also the first example of one catalytic system working for the ring‐opening reaction of donor–acceptor cyclopropanes with three different nucleophiles, let alone in an asymmetric version.     

Asymmetric Ring‐Opening of Cyclopropyl Ketones with Thiol,Alcohol, and Carboxylic Acid Nucleophiles Catalyzed by a Chiral N,N′‐Dioxide–Scandium(III) Complex

A highly efficient asymmetric ring‐opening reaction of cyclopropyl ketones with a broad range of thiols, alcohols and carboxylic acids has been first realized by using a chiral N,N′‐dioxide–scandium(III) complex as catalyst. The corresponding sulfides, ethers, and esters were obtained in up to 99 % yield and 95 % ee. This is also the first example of one catalytic system working for the ring‐opening reaction of donor–acceptor cyclopropanes with three different nucleophiles, let alone in an asymmetric version.     

The Bargellini reaction in a series of heterocyclic thiols

The synthesis of sterically hindered carboxylic acids based on heterocyclic thiols has been performed via the Bargellini reaction. Structure of the obtained compounds has been confirmed by means of X-ray diffraction analysis.     

Two stage derivatization with N-(tert.-butyldimethylsilyl)- N-methyl-trifluoroacetamide (MTBSTFA) and N-methyl-bis-(trifluoroacetamide) (MBTFA) for the gas-chromatographic analysis of OH-, SH- and NH-compounds

Summary Various alcohols, thiols, phenols, carboxylic acids, amines and amides were subjected to silylation with MTBSTFA followed by trifluoroacetylation with MBTFA. The reaction products have been identified and quantified by means of gas chromatography coupled with atomic emission and mass spectrometric detection.     

Acyl iodides in organic and organoelement chemistry

This review is focused on our and literature data on reactions of acyl iodides RC(O)I with organic (alcohols, ethers, esters, carboxylic acids, amino acids, tertiary amines, nitrogen heterocycles, carbamides, thiocarbamides, and thiols) and organoelement compounds (alkoxy silanes, siloxanes, silylamines, silazanes, silicon-containing amines, and ethynyl silanes, germanes, and stannanes). Photolysis of acyl iodides in arene medium yields a-diketones, products of photochemical Friedel-Crafts acylation and iodination of arenes, and polyarylenation.     

Diastereoselective Nucleophilic Ring‐Opening Reactions of 2,6‐Diazasemibullvalenes for the Synthesis of Diverse Functionalized Δ1‐Bipyrroline Derivatives

Nucleophilic ring‐opening reactions of 2,6‐diazasemibullvalenes (NSBVs) were investigated. Different types of nucleophile (alcohols, phenols, thiols, carboxylic acids, water, enols, amines, indoles, metal‐halide salts, sodium azide, organozinc compounds, lithium alkynethiolate, and sulfoxonium ylides) were used to afford diverse functionalized Δ¹‐bipyrroline derivatives in good yields with high regio‐ and diastereoselectivity. Most of the reactions featured milder conditions and higher reactivity relative to those for common aziridine derivatives, probably because of the rigid ring system and substitution patterns of NSBVs.     

Ni(II) Precatalysts Enable Thioetherification of (Hetero)Aryl Halides and Tosylates and Tandem C−S/C−N Couplings

Ni-catalyzed C−S cross-coupling reactions have received less attention compared with other C-heteroatom couplings. Most reported examples comprise the thioetherification of most reactive aryl iodides with aromatic thiols. The use of C−O electrophiles in this context is almost uncharted. Here, we describe that preformed Ni(II) precatalysts of the type NiCl(allyl)(PMe₂Ar’) (Ar’=terphenyl group) efficiently couple a wide range of (hetero)aryl halides, including challenging aryl chlorides, with a variety of aromatic and aliphatic thiols. Aryl and alkenyl tosylates are also well tolerated, demonstrating, for the first time, to be competent electrophilic partners in Ni-catalyzed C−S bond formation. The chemoselective functionalization of the C−I bond in the presence of a C−Cl bond allows for designing site-selective tandem C−S/C−N couplings. The formation of the two C-heteroatom bonds takes place in a single operation and represents a rare example of dual electrophile/nucleophile chemoselective process.