Access to C(sp3)-C(sp2) and C(sp2)-C(sp2) bond formation via sequential intermolecular carbopalladation of multiple carbon-carbon bonds

A synthetic strategy of 4-benzyl-substituted 1,3-butadiene derivatives through Pd-catalyzed three-component coupling reaction of benzyl chlorides, alkynes, and monosubstituted alkenes is described. This tandem coupling reaction forms a C(sp(3))-C(sp(2)) bond and a C(sp(2))-C(sp(2)) bond sequentially in a single-step operation.     

Original palladium pincer complexes deriving from 1,3-bis(thiophosphinoyl)indene proligands: C(sp3)-H versus C(sp2)-H bond activation

A series of original 2-indenylidene palladium pincer complexes {PdL[Ind(Ph(2)P==S)(2)]} (L = HNCy(2), PPh(3), Cl(-)) have been prepared by double C-H activation of a 1,3-bis(thiophosphinoyl)indene proligand. Crystallographic analyses and DFT calculations indicate that the bonding situation of the {Pd[Ind(Ph(2)P==S)(2)]} fragment is essentially governed by the conjugated and rigid nature of the dianionic pincer ligand, the nature of the coligand having little influence. The formation of the 2-indenylidene complexes involves either a 2-indenyl pincer or a four-membered cyclometalated complex as an intermediate, suggesting that C(sp(2))-H or C(sp(3))-H bond activation takes place. However, deuterium labelling experiences show that in all cases, C(sp(3))-H bond activation occurs followed eventually by a Pd/H exchange. Nevertheless, evidence for direct C(sp(2))-H bond activation under mild conditions is obtained when a methyl group is introduced at the indene proligand to prevent C(sp(3))-H bond activation. The ensuing dissymmetrical 2-indenyl palladium pincer complex has been fully characterized.     

C(sp)-C(sp3) bond formation through Cu-catalyzed cross-coupling of N-tosylhydrazones and trialkylsilylethynes

Copper-catalyzed cross-coupling of N-tosylhydrazones with trialkylsilylethynes leads to the formation of C(sp)-C(sp(3)) bonds. Cu carbene migratory insertion is proposed to play the key role in this transformation.     

Copper-catalyzed decarboxylative C(sp2)-C(sp3) coupling reactions via radical mechanism

We have successfully developed an example of copper-catalyzed decarboxylative C(sp(2))-C(sp(3)) coupling reactions via C-H functionalization for the first time. It is noteworthy that our catalytic system is very stable, low-cost, palladium-free, ligand-free, and easily accessible.     

A new furanocoumarin from the mangrove endophytic fungus Penicillium sp. (ZH16)

A new furanocoumarin, 5-methyl-8-(3-methylbut-2-enyl) furanocoumarin (1), together with seven known compounds, sterequinone C (2), cyclo(6,7-en-Pro-L-Phe) (3), bergapten, scopoletin, umbelliferone, 1,7-dihydroxyxanthone and 3,5-dimethoxybiphenyl, was isolated from the mangrove endophytic fungus, Penicillium sp. ZH16 obtained from the South China Sea. Their structures were determined by analysis of spectroscopic data. Compound 1 exhibited cytotoxicity against KB and KB(V)200 cells in?vitro with IC(50) values 5 and 10?μg?mL(-1), respectively.     

Rhodium(I)‐Catalyzed Sequential C(sp)C(sp3) and C(sp3)C(sp3) Bond Formation through Migratory Carbene Insertion

A Rh^I‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp)? C(sp³) and C(sp³)? C(sp³) bonds are built successively on the carbenic carbon atom. The Rh^I‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C? C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.     

Conversion of a (sp3)C-F bond of alkyl fluorides to (sp3)C-X (X = Cl, C, H, O, S, Se, Te, N) bonds using organoaluminium reagents

A simple method for the conversion of (sp(3))C-F bonds of alkyl fluorides to (sp(3))C-X (X = Cl, C, H, O, S, Se, Te, N) bonds has been achieved by the use of a hexane solution of organoaluminum reagents having Al-X bonds.     

Aza-oxindole synthesis by oxidative coupling of C(sp2)-H and C(sp3)-H centers

A Cu(II) mediated oxidative C(sp(2))-H and C(sp(3))-H coupling protocol gives access to aza-oxindoles in good to excellent yield in the presence of NaOtBu as base and toluene as solvent.     

Catalysis by Platinum(II) Iodo Complexes of C(sp2)–C(sp2) Electrophile Coupling

Kinetics and Catalysis - The catalytic C(sp2)–C(sp2) coupling of vinyl iodide was performed to form 1,3-butadiene in the PtII–NaI–С2Н3I–acetone-D6 system at...     

库水硼镁石2MgO.3B2O3.15H2O的65-310K间的比热测定及其热力学性质的计算

用真空绝热量热计测定了库水硼镁石2MgO.3B2O3.15H2O在65-310K间的比热.根据Debye-Einsein函数组合式, 计算了0-65K间的比热, 其误差为0.4%.在65-310K范围内, 每隔5K, 计算了熵、焓和自由能函数.     

sp carbon chains surrounded by sp(3) carbon double helices: coordination-driven self-assembly of wirelike Pt(CC)(n)Pt moieties that are spanned by two P(CH(2))(m)P linkages

Reactions of trans,trans-(C6F5)(p-tol3P)2Pt(CC)4Pt(Pp-tol3)2(C6F5) and diphosphines Ar2P(CH2)mPAr2 yield trans,trans-(C6F5)(Ar2P(CH2)mPAr2)Pt(CC)4Pt(Ar2P(CH2)mPAr2)(C6F5), in which the platinum atoms are spanned via an sp and two sp3 carbon chains (Ar/m = 3, Ph/14, 87%; 4, p-tol/14, 91%; 5, p-C6H4-t-Bu/14, 77%; 7, Ph/10, 80%; 8, Ph/11, 80%; 9, Ph/12, 36%; only oligomers form for m > 14). Crystal structures of 3-5 show that the sp3 chains adopt chiral double-helical conformations that shield the sp chain at approximately the van der Waals distance, with both enantiomers in the unit cell. The platinum square planes define angles of 196.6 degrees -189.9 degrees or more than a half twist. Crystal structures of 7-9, which have shorter sp3 chains, exhibit nonhelical conformations. Reaction of the corresponding Pt(CC)6Pt complex and Ph2P(CH2)18PPh2 gives an analogous adduct (27%). The crystal structure shows two independent molecules, one helical and the other not. Low-temperature NMR data suggest that the enantiomeric helical conformations of 3-5 rapidly interconvert in solution. Cyclic voltammograms of 3-5 show more reversible oxidations than model compounds lacking bridging sp3 chains. These are the only double-helical molecules that do not feature bonding interactions between the helix strands, or covalent bonds to templates dispersed throughout the strands, or any type of encoding. The driving force for helix formation is analyzed.     

Synthesis,Crystal Structure and Biological Activity of(E)-3-Chloro-2-(2-(2-methylbenzylidene)-hydrazinyl)pyridine

The novel Schiff base(E)-3-chloro-2-(2-(2-methylbenzylidene)hydrazinyl)pyridine was synthesized and characterized by ~1H NMR, MS, elemental analysis and X-ray diffraction. The compound crystallizes in monoclinic space group Pbca with a = 14.6638(3), b = 7.7522(2), c = 20.3850(4) ?, V = 2317.30(9) ?~3, Z = 8, R = 0.063 and w R = 0.1922. The title compound exhibits good antifungal activity against Stemphylium lycopersici(Enjoji) Yamamoto and Fusarium oxysporum sp. cucumebrium.     

Synthesis of phenylnitroxides bridged by an sp(3)-linkage

Silicon- and carbon-bridged phenylnitroxides were synthesized. They exhibited similar ESR profiles independent of the nature of the sp(3) bridge and the substitution mode of the phenylene units. The spectra revealed a quintet signal at room temperature, which became a broad triplet by lowering the temperature. Accumulated ESR measurements at 77 K led to the successful observation of a signal at Deltam(s) = 2, indicating that the triplet state was involved in this system.     

sp carbon chains surrounded by sp(3) carbon double helices: directed syntheses of wirelike Pt(CC)(n)Pt moieties that are spanned by two P(CH(2))(m)P linkages via alkene metathesis

Reactions of trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2PtCl (1; m' = a, 6; b, 7; c, 8; d, 9; e, 10) and H(CC)2H (HNEt2, cat. CuI) give trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)2H (3a-e, 80-95%). Oxidative homocouplings of 3a-d under Hay conditions (O2, cat. CuCl/TMEDA, acetone) yield trans,trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)4Pt(Ph2P(CH2)m'CH=CH2)2(C6F5) (4a-d, 64-84%). Treatment of 3c-e with excess HCCSiEt3 under Hay conditions gives trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)3SiEt3 (56-73%). Homocouplings (n-Bu4N+ F-, Me3SiCl, Hay conditions) afford trans,trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)6Pt(Ph2P(CH2)m'CH=CH2)2(C6F5) (13c-e, 59-64%). Reactions of 4a-d and 13c-e with Grubbs' catalyst, followed by hydrogenation, give mixtures of trans,trans-(C6F5)(Ph2P(CH2)mPPh2)Pt(CC)nPt(Ph2P(CH2)mPPh2)(C6F5) with termini-spanning diphosphines and trans,trans-(C6F5)(Ph2P(CH2)mPPh2)Pt(CC)nPt(Ph2P(CH2)mPPh2)(C6F5) with trans-spanning diphosphines (m = 2m' + 2; n = 4, 6). The latter (n = 4) are independently synthesized by similar metatheses/hydrogenations of 1a-d to give trans-(C6F5)(Ph2P(CH2)mPPh2)PtCl (49-59%), followed by analogous introductions of (CC)4 chains (66-77%). Crystal structures of complexes with termini-spanning diphosphines show sp3 chains with both double-helical (m/n = 20/4) and nonhelical (m/n = 20/6) conformations, and highly shielded sp chains. The sp3 chains of complexes with trans-spanning diphosphines exhibit double half-clamshell conformations. The dynamic properties of both classes of molecules are analyzed in detail.     

Palladium-catalyzed silyl C(sp3)-H bond activation

The first transition-metal-catalyzed activation of silyl C(sp(3))-H bond was realized and synthetically applied. A variety of organic skeletons substituted with SiMe(3) groups could undergo the Pd-catalyzed intramolecular coupling reaction, resulting in an unprecedented synthetic method for yielding six-membered silacycles. It was found that the adjacent Si atom played an essential role for the activation of the C(sp(3))-H bond of the SiMe(3) group; no activation reaction of the C(sp(3))-H bond of the CMe(3) group took place under the same reaction conditions.     

Unexpected copper-catalyzed aerobic oxidative cleavage of C(sp3)-C(sp3) bond of glycol ethers

An unexpected Cu-catalyzed oxidative cleavage of the C(sp(3))-C(sp(3)) bond in glycol ethers by using air or molecular oxygen as the terminal stoichiometric oxidant is demonstrated. As a result, the corresponding α-acyloxy ethers and formates of 1,2-ethanediol are formed by direct coupling of carboxylic acids and aldehydes with glycol ethers under the reaction conditions. This method represents the first example of Cu-catalyzed aerobic cleavage of saturated C-C bond in ethers.     

Photochemically induced radical transformation of C(sp3)-H bonds to C(sp3)-CN bonds

A general protocol for direct transformation of unreactive C(sp(3))-H bonds to C(sp(3))-CN bonds has been developed. The C-H activation was effected by photoexcited benzophenone, and the generated carbon radical was subsequently trapped with tosyl cyanide to afford the corresponding nitrile in a highly efficient manner. The present methodology is widely applicable to versatile starting materials and, thus, serves as a powerful tool for selective one-carbon elongation for construction of architecturally complex molecules.     

Biomimetic catalytic aerobic oxidation of C–sp(3)–H bonds under mild conditions using galactose oxidase model compound CuIIL

Developing highly efficient catalytic protocols for C–sp(3)–H bond aerobic oxidation under mild conditions is a long-desired goal of chemists. Inspired by nature, a biomimetic approach for the aerobic oxidation of C–sp(3)–H by galactose oxidase model compound Cu^IIL and NHPI (N-hydroxyphthalimide) was developed. The Cu^IIL–NHPI system exhibited excellent performance in the oxidation of C–sp(3)–H bonds to ketones, especially for light alkanes. The biomimetic catalytic protocol had a broad substrate scope. Mechanistic studies revealed that the Cu^I-radical intermediate species generated from the intramolecular redox process of Cu^IILH₂ was critical for O₂ activation. Kinetic experiments showed that the activation of NHPI was the rate-determining step. Furthermore, activation of NHPI in the Cu^IIL–NHPI system was demonstrated by time-resolved EPR results. The persistent PINO (phthalimide-N-oxyl) radical mechanism for the aerobic oxidation of C–sp(3)–H bond was demonstrated.

A biomimetic catalytic approach for the aerobic oxidation of C–sp(3)–H bonds using galactose oxidase model compound was developed. EPR showed that the Cu^I-radical intermediate species was critical for O₂ activation.     

Synthesis and crystal structure of New Amminecopper(II) Nitrates: [Cu(NH3)2](NO3)2 and [Cu(NH3)](NO3)2

[Cu(NH₃)₂](NO₃)₂ ( I ) and [Cu(NH₃](NO₃)₂ ( II ) were synthesized by interaction of molten NH₄NO₃ with [Cu(NH₃)₄](NO₃)₂ and Cu(NO₃)₂ · 3 H₂O, respectively, at 180 to 195°C for 24 hr. According to X-Ray single crystal analysis, I is orthorhombic (sp. gr. Pbca) with a = 5.678(1), b = 9.765(2), c = 11.596(2) Å, Z = 4, R = 0.060; II is monoclinic (sp. gr. P2₁/c) with a = 6.670(1), b = 8.658(2), c = 9.661(2) Å, β = 101.78(2)°, Z = 4, R = 0.027. In both structures, the nearest coordination environment of Cu is a slightly distorted square formed by N (from NH₃) and O atoms (from NO₃ groups). The structure of I consists of centrosymmetrical [Cu(NH₃)₂](NO₃)₂ molecules linked by hydrogen bonds. The Cu? N and Cu? O distances are 1.98 and 2.01 Å, respectively. In II , the Cu? N distance is 1.95 Å, the Cu? O distances are 1.96, 2.02, and 2.03 Å. The [CuO₃NH₃] squares are connected by NO₃ bridges into zigzag chains, which are linked into layers by longer Cu? O interactions (2.31 Å). Obviously, the layers are additionally strengthened and held together by hydrogen bonds.     

Solvent-controlled switch of selectivity between sp2 and sp3 C-H bond activation by platinum(II)

By merely changing the solvent, two different cyclometalated platinum complexes resulted from either sp(2) or sp(3) C-H bond activation can be prepared selectively. For example, the reaction of L1 with K(2)PtCl(4) in MeCN gave exclusively kinetic product 1a, while the reaction in AcOH was thermodynamically controlled and produced predominantly 1b.