Solution properties of polymers of pyridinium and ammonium methacrylates.

Solution properties of poly[1(2-hydroxyethyl)pyridiniumbenzene sulfonate methacrylate] and poly[1(2-hydroxyethyl)trimethylammoniumbenzene sulfonate methacrylate] were studied. Within a certain concentration range of some added low molecular weight electrolytes, phase separation occurs. The dependence of intrinsic viscosity on molecular weight was determined and the steric factor estimated for both polymers. For nonaqueous solvents, an extrapolation of the dependence of the refractive index increment of the polymer on the refractive index of the solvent leads to an apparent refractive index of the polymer, different from the refractive index determined directly by the immersion method. Some peculiarities of light scattering in solutions with no electrolyte added are mentioned.     

Investigation of the interaction of a polyelectrolyte with low molecular weight electrolytes containing nonidentical counterions by differential refractometry

If the counterion of a polyelectrolyte is not identical with any of the ions of a low molecular weight electrolyte added to the solution, the system may be regarded as a four-component system. Relations for the refractive index increments have been derived which allow the determination of the coefficient of selective sorption of the added electrolyte from the refractive index increments of the components independent of the original counterion of the polyelectrolyte. Equilibrium dialysis and differential refractometry were used to study the interaction of KCl, KBr and NaI with poly[-1(2-hydroxyethyl)pyridiniumbenzenesulfonate methacrylate] or with an analogous polymer containing a toluenesulfonate counterion in aqueous solutions. The coefficient of selective sorption increases in the series Cl^? < Br^? < I^? from strongly negative to strongly positive values; the specific interaction of these counterions with the macroion increases in the same order.     

A novel route to poly(2-hydroxyethyl methacrylate) and its amphiphilic block copolymers

The vinyl of the ester group of 2-vinyloxyethyl methacrylate was first selectively reacted with acetic acid to obtain 2-[1-(acetoxy)ethoxy]ethyl methacrylate ( 2 ). This protected monomer was subjected to anionic polymerization in tetrahydrofuran at −60°C in the presence of LiCl, using 1,1-diphenylhexyllithium as initiator. The molecular weight of the polymer could thus be controlled and a narrow molecular weight distribution obtained. The protecting group, 1-(acetoxy)ethyl, could be easily eliminated (by quenching the polymerization reaction with methanol and water) to generate poly(2-hydroxyethyl methacrylate) (poly(HEMA)). Block copolymers were also prepared by the sequential anionic polymerization of MMA and 2 or styrene and 2 . They possess narrow molecular weight distributions, and controlled molecular weights and compositions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1865–1872, 1998     

示差折光和光散射双检测体积排除色谱的绝对定量化

讨论了示差折光和光散射联用双检测体积排除色谱的绝对定量化的原理,强调指出了试样注入量在数据处理中的重要作用.测量注入试样的这两种检测器的检测常数,可以同时得到试样的折光指数增量和重均分子量的绝对值.这一方法除了适用于各种均聚物外,还可以应用于高分子混合物的分析.此时,如将混合物看作为单一溶质,从所得折光指数增量和重均分子量,可对它们的组成作出定量分析,还可以判断共混物两个组分之间有无分子缔合等现象的产生.这一方法应用于聚甲基丙烯酸甲酯/聚苯乙烯(PMMA/PS)混合物的溶液,指明在四氢呋喃中两者产生缔合而形成了复合物.     

Photophysical properties of novel ferrocenyl quinoline derivatives with red emission in solutions and polymeric matrices

A group of novel 2-ferrocenyl quinoline derivatives was designed and their photophysical properties were thoroughly studied. UV-VIS and steady-state fluorescence spectra show that these compounds gain energy in the ultra-violet region and give red emissions in different organic solvents. More importantly, two transparent hybrid thick films composed of 2-ferrocenyl quinoline and poly[1-(methoxycarbonyl)-1-methylethylene] (poly(methyl 2-methylpropenoate, (poly(methyl methacrylate), PMMA), or poly[2-hydroxyethyl 2-methylprop-2-enoate] (poly(2-hydroxyethyl methacrylate), PHEMA) matrix were successfully prepared. Both films showed red emissions of ferrocenyl quinoline chromophore and the ideal composition of luminescent species is 10⁻⁶ M PMMA and 10⁻⁵ M PHEMA, respectively. SEM graph exhibited ferrocenyl quinoline molecules dispersed very homogenously within the above polymer hosts.     

Laser reflectometry: Examination of the influence of some assumptions and approximations to calculate the adsorption from the reflectometric signal

The adsorption density of a polymer was calculated from the output of a reflectometric instrument, using the model described by Dijt et al. taking into account a step layer profile of the adsorbed film, in order to weight the influence of several experimental parameters (refractive index and thickness of the substrate, concentration of the polymer solution) and hypothesis (thickness of the adsorbed layer, linear dependence of the output on the surface excess). Calculated data were backed with measurements in an impinging jet cell, using two adsorption systems: the cationic poly(allyl amine, HCl) on SiO₂ and the anionic poly(styrene sulfonate) on a polyamide 6-6 covered silicon substrate. We established the limit of a linear response of the reflectometric signal versus adsorption density, which depends on the refractive index of the substrate and on the concentration of the polymer solution. Calculations showed that an increase in the assumed adsorbed film thickness between 5 and 20 nm caused a decrease of about 13% in the calculated surface excess at the plateau of the isotherm for PSS. At concentrations of the polymer solution above 1 or 2 g L⁻¹, we found experimental circumstances where the reflectometric output was negative or null, although adsorption was taking place. This was an effect of the high refractive index of the solution.     

Protein adsorption on polymer-modified silica particle surface

Silicon substrate surface and silica particle surface were modified with five kinds of polymers, poly(2-methoxyethyl methacrylate) (pMEMA), poly(2-hydroxyethyl methacrylate) (pHEMA), poly(acrylamide) (pAAm), poly(methyl methacrylate) (pMMA), and poly(styrene) (pSt), using a combined polymerization of surface-initiated polymerization that gives dense polymer chain layers and atom transfer radical polymerization (ATRP) that yields polymers with a narrow molecular weight distribution. Measurements of water contact angle and polymer chain amount on the modified silicon substrate surface and adsorption amounts of proteins (albumin and fibrinogen) on the modified silica particle surface revealed that the amount of polymer on the modified surface greatly affects the suppression of protein adsorption on the surface.     

Block copolymer mediated synthesis of amphiphilic gold nanoparticles in water and an aqueous tetrahydrofuran medium: An approach for the preparation of polymer–gold nanocomposites

The synthesis of polymer‐matrix‐compatible amphiphilic gold (Au) nanoparticles with well‐defined triblock polymer poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] and diblock polymers poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], polystyrene‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], and poly(t‐butyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] in water and in aqueous tetrahydrofuran (tetrahydrofuran/H₂O = 20:1 v/v) at room temperature is reported. All these amphiphilic block copolymers were synthesized with atom transfer radical polymerization. The variations of the position of the plasmon resonance band and the core diameter of such block copolymer functionalized Au particles with the variation of the surface functionality, solvent, and molecular weight of the hydrophobic and hydrophilic parts of the block copolymers were systematically studied. Different types of polymer–Au nanocomposite films [poly(methyl methacrylate)–Au, poly(t‐butyl methacrylate)–Au, polystyrene–Au, poly(vinyl alcohol)–Au, and poly(vinyl pyrrolidone)–Au] were prepared through the blending of appropriate functionalized Au nanoparticles with the respective polymer matrices {e.g., blending poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate‐stabilized Au with the poly(methyl methacrylate)matrix only}. The compatibility of specific block copolymer modified Au nanoparticles with a specific homopolymer matrix was determined by a combination of ultraviolet–visible spectroscopy, transmission electron microscopy, and differential scanning calorimetry analyses. The facile formation of polymer–Au nanocomposites with a specific block copolymer stabilized Au particle was attributed to the good compatibility of block copolymer coated Au particles with a specific polymer matrix. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1841–1854, 2006     

Surface reorientation of hydrogels based on methacrylate copolymers

Surface molecular structures of two statistical copolymers, poly(2-hydroxyethyl methacrylate-co-butyl methacrylate) (HEMA-co-BMA) and poly[2-(2-ethoxyethoxy)ethyl methacrylate-co-butyl methacrylate] (EOEOEMA-co-BMA), were studied by X-ray photoelectron spectroscopy (XPS). Besides the classical “dry” XPS technique, where the polymer samples were air-dried, also “deep-freezing” technique was used, where the samples were investigated in deep-frozen hydrated state. The differences in results obtained by the two techniques are discussed from the point of view of the polymer surface chain reorientation in response to various environment. The reverse polymer chain reorientation from the hydrated towards dry state was also followed.     

Synthesis,characterization, and biological activity of [2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate and its derivatives

A new type of methacrylate monomer, [2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate (APEMA), was synthesized. The oxime, 2,4‐dinitrophenylhydrazone, and thiosemicarbazone derivatives of poly{[2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate} [poly(APEMA)] were prepared with hydroxylamine hydrochloride, 2,4‐dinitrophenylhydrazine, and thiosemicarbazone hydrochloride, respectively. The radical homopolymerization of APEMA was performed at 65 °C in a 1,4‐dioxane solution with benzoyl peroxide as an initiator. The monomer and its homopolymer were characterized with Fourier transform infrared and NMR techniques. The thermal stabilities of poly(APEMA) and its derivatives were investigated with thermogravimetric analysis and differential scanning calorimetry. The ultraviolet stability of the polymers were compared. The solubility and inherent viscosity of the polymers were also determined. The number‐average and weight‐average molecular weights and polydispersity index of the polymers were determined with gel permeation chromatography. The antibacterial and antifungal effects of the monomer and the polymer and its derivatives were also investigated on various bacteria and fungi. The activation energies of the thermal degradation of the polymers were calculated with the Ozawa method. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3157–3169, 2004     

The influence of molecular weight of the donor polymer on the solid-state behavior of interchain EDA complexes

N-(2-hydroxyethyl)carbazolyl methacrylate (HECM) and N-ethyl-3-hydroxymethyl carbazolyl methacrylate (HMCM-2) were polymerized by group transfer polymerization to varying molecular weights of somewhat narrow molecular weight distribution. The thermal behavior of the homopolymers and of their EDA complexes with poly(β-hydroxyethyl-3,5-dinitrobenzoyl methacrylate) (PDNBM-2) was studied as a function of molecular weight. The T_g′s of both polymers and their miscible complexes increase steadily as molecular weight increases and then become constant at about M _n = 6000. Both the PHECM–PDNBM-2 and PHMCM-2—PDNBM-2 systems are thermally reversible miscible networks over all polymer molecular weights. Miscibility is thermodynamically controlled over the entire range of molecular weights in the first system and decomplexation does not occur below the decomposition temperature. However, miscibility is thermodynamically controlled in the second system when the molecular weight of PHMCM-2 is less than 5000, and kinetically controlled for higher molecular weights. The decomplexation temperature or LCST of the PHMCM-2–PDNBM-2 system occurs below the decomposition temperature and increases with decreasing PHMCM-2 molecular weight, in agreement with theoretical predictions on the dependence of LCST on polymer molecular weight.     

Determination of the coefficients of selective sorption in polymer solutions in multicomponent solvents from density increments

The density increment method has been used to measure the selective sorption coefficient of 2,2,3,3-tetrafluoropropanol (TFP) onto poly(methyl methacrylate) from the solvent mixture benzene-TFP (80:20 by volume). The results are in good agreement with the data obtained by the established refractive index increment method. The density increment method seems to be a promising tool for the characterization of polymer solutions in multicomponent solvents.     

Complexation of well-controlled low-molecular weight polyelectrolytes with antisense oligonucleotides

The influences of polymer-related properties such as molecular weight, charge density, counter ion, and hydrophilic block on the complexation of polyelectrolytes and a fluorescein-labeled oligonucleotide (ON) were investigated. A series of well-defined and well-controlled 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) polymers and block copolymers were prepared using living anionic and radical polymerization methods. Fluorescence measurement was used to reveal the effects of polymer molecular weight, charge density, and counter ion type on the complexation. PolyDMAEMA samples having double molecular weights of the chosen oligonucleotide gave the optimal complexation performance. Kinetic studies showed that high-molecular weight/high-charge density polymer samples produced very stable complexes. The fully charged polyDMAEMA displayed the strongest binding with the ON. These complexes were therefore less sensitive to the changes in the environment. PolyDMAEMA–DMSQ samples had slightly higher complexation ability than polyDMAEMA–MCQ (DMSQ: dimethylsulfate quat; MCQ: methylchloride quat). Both poly(DMAEMA-b-HEMA) and poly(DMAEMA–MCQ-b-PEG) block copolymers showed good complexation ability and steric stability [HEMA: 2-hydroxyethyl methacrylate; PEG: poly(ethylene glycol)]. PEG, but not HEMA block, enhanced the effectiveness of polyDMAEMA–MCQ binding with the ON.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

用多官能链转移剂通过普通自由基聚合制备两亲性杂臂星形聚合物

以偶氮二异丁腈为引发剂,四(3-巯基丙酸季戊四醇四酯)(PETMP)为链转移剂进行甲基丙烯酸甲酯(MMA)的自由基聚合,得到了含有残余巯基的聚甲基丙烯酸甲酯大分子链转移剂(HS-PMMA).然后,以HS-PMMA作为大分子链转移剂进行甲基丙烯酸叔丁酯(tBMA)的自由基聚合,合成了杂臂星形聚合物.最后,将所得杂臂星形聚合物的PtBMA链段水解得到了两亲性杂臂星形聚合物.     

Surface friction of hydrogels with well-defined polyelectrolyte brushes

Hydrogels of poly(2-hydroxyethyl methacrylate) (PHEMA) with well-defined polyelectrolyte brushes of poly(sodium 4-styrenesulfonate) (PNaSS) of various molecular weights were synthesized, keeping the distance between the polymer brushes constant at ca. 20 nm. The effect of polyelectrolyte brush length on the sliding friction against a glass plate, an electrorepulsive solid substrate, was investigated in water in a velocity range of 7.5 x 10(-5) to 7.5 x 10(-2) m/s. It is found that the presence of polymer brush can dramatically reduce the friction when the polymer brushes are short. With an increase in the length of the polymer brush, this drag reduction effect only works at a low sliding velocity, and the gel with long polymer brushes even shows a higher friction than that of a normal network gel at a high sliding velocity. The strong polymer length and sliding velocity dependence indicate a dynamic mechanism of the polymer brush effect.     

旋光性聚{(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯}的合成与表征

设计、合成了一个带有横挂三联苯侧基的手性乙烯基单体——(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯,进行了普通自由基和原子转移自由基聚合反应.所得聚合物具有比单体低30°左右的比旋光度,且在侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明其主链可能形成了具有相反旋光方向的螺旋构象.在所研究范围内,聚合条件对聚合物的旋光度没有明显的影响.在分子量较小时,聚合物的比旋光度随着分子量的增加而降低,说明主链螺旋构象的贡献在增大,而当分子量达到一定值后,聚合物的比旋光度不再随分子量的增加而显著变化.     

Synthesis of poly(di[methylamine]ethyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(di[methylamine]ethyl methacrylate) amphiphilic triblock copolymers by ATRP: Condensed‐phase and solution properties

The synthesis of amphiphilic triblock copolymers, poly(di[methylamine]ethyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(di[methylamine]ethyl methacrylate) PDMAE‐b‐PCH‐b‐PDMAE, has been performed by atom transfer radical polymerisation. Those have been obtained in a well‐controlled manner in terms of molecular weight and polydispersity index. The triblock copolymer characterisation has been made in condensed state and in solution. The existence of microphase separation has been confirmed by differential scanning calorimetry. However, the domains of both inner and outer blocks seem not to be ordered for one another from small‐angle X‐ray scattering (SAXS) measurements using synchrotron radiation. The micelle formation in dilute methanol solutions has been confirmed for all triblock copolymers by dynamic light scattering analyses. The size of these micelles has been demonstrated to be dependent on the molecular weight. Similar observations have been made in concentrate methanol solutions by using SAXS experiments, pointed also out that an increment of the intermicelle interactions is produced as the concentration increases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 85–92, 2008     

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.