单醚二酐型聚醚酰亚胺的透气性能与分子结构之间关系的研究

合成了一系列单醚二酐型聚醚酞亚胺（ＰＥＩ），研究了它们对Ｈ２、ＣＯ２、Ｏ２、Ｎ２和ＣＨ４５种气体的透过性能与分子结构的关系．结果表明，这类聚醚欧亚胺的分子结构对其透气性和透气选择性有很大的影响，聚合物的自由体积和链段活动性是控制透气性和透气选择性的主要因素．二苯醚四酸二酐（ＯＤＰＡ－４．４＇－二Ｊ氨基二苯异丙烷（ＩＰＤＡ）具有很大的自由体积和较小的链段活动性、很大的透气性和较小的透气选择性，ＯＤＰＡ—４，４’－二氨基二苯酮（ＤＡＢＰ）具有很小的自由体积和较小的链段活动性、很小的透气性和较大的透气选择性，ＯＤＰＡ—３，３’－二甲基二苯甲烷二胶（ＤＭＭＤＡ）具有较大的自由体积和较小的链段活动性、很大的透气性和很大的透气选择性．     

4个新型有机磷缩合试剂的合成及其在生物活性肽合成中…

报道了４个新型有机磷化合物：Ｎ－二乙氧基磷酰并恶唑酮（ＤＥＰＢＯ０，Ｎ－（２－氧－１，３，２－二氧杂磷环己烷基）－苯并恶唑酮（ＤＯＰＢＯ），３－（２′－氧－１′，３′，２′－二氧杂磷杂环己烷基）－氧－１，２，３－苯并三嗪－４（３Ｈ）－酮（）ＤＯＰＢＴ）和３－（二乙氧基磷酰基）－氧－１，２，３－苯并三嗪－４（３Ｈ）－酮（ＤＥＰＢＴ）的合成，并研究了它们作为缩合试剂的多肽合成中的应用，研究结果表明，它     

抗氧剂对植物油氧化稳定性影响的高压差示扫描量热法评价

利用高压差示扫描量热法（ＰＤＳＣ）研究了二烷基二硫代氨基甲酸锌（ＶＡＺ）、２,２′－亚甲基双（４－甲基－６特丁基苯酚）（２２４６）、苯江三唑（ＢＴＺ）和二烷基对苯二胺（ＤＢＡ）４种抗氧添加剂对菜子油氧化稳定性的影响,得到了它们抗氧化作用的大小顺序。别外,根据队仑尼乌斯公式计算了不同油样氧化反应的活化能,证明了ＰＤＳＣ是一种快速简便评价基础油氧化稳定性的方法,适用于抗氧添加剂配方的设计工作。     

1,10-双(1′-苯基-3′-甲基-5′-氧代吡唑-4′-基)癸二酮-[1,10]与三苯基氧化膦对钐(Ⅲ)的协同萃取行为研究

研究了１，１０－双（１′－苯基－３′－甲基－５′－氧代吡唑－４－基）癸二酮－［１，１０］（ＢＰＭＰＤＤ，Ｈ２Ａ）与三苯基氧化膦（ＴＰＰＯ，Ｂ）的氯仿溶液从硝酸介质中对Ｓｍ（Ⅲ）的协同萃取行为，计算了体系的酸性协萃系数ＲＡ和协萃系数Ｒ，用斜率法测得协萃合物的组成为ＳｍＡ·ＨＡ·Ｂ，计算了协萃平衡常数，用萃取法制得了固态协萃合物，并对其组成、ＩＲ及ＴＧ－ＤＴＡ进行了研究     

1,10—双（1′—苯基—3′—甲基—5′—氧代吡唑—4′—基）癸二酮—（1,10）？…

研究了１，１０－双（１′－苯基－３′－甲基－５′－氧代吡唑－４－基）癸二酮－（１，１０）（ＢＰＭＰＤＤ，Ｈ２Ａ）与三苯基氧化膦（ＴＰＰＯ，Ｂ）的氯仿溶液从硝酸介质中对Ｓｎ（Ⅲ）的协同萃取行为，计算了体系的酸性协萃系数ＲＡ和协萃系数Ｒ，用斜率法测得协萃合物的组成为ＳｍＡ．ＨＡ．Ｂ，计算了协萃平衡常数，用萃取法制得了固态协萃合物，并对其组成ＩＲ及ＴＧ－ＤＴＡ进行了研究。     

1,9—双（1′—苯基—3′—甲基—5′—氧代吡唑—4′—基）壬二酮—（1,9）与三？…

研究了１，９－双（１′－苯基－３′－甲基－５′－氧代吡唑－４′－基）壬二酮－（１，９）（ＢＰＭＰＮＤ，Ｈ２Ａ）与三辛基氧膦（ＴＯＰＯ，Ｂ）的氯仿溶液，从硝酸介质中对Ｌａ（Ⅲ），Ｄｙ（Ⅲ）的协同萃取，计算了体系的酸性协萃系数ＲＡ和协萃系数Ｒ，用斜率法测得协萃合物的组成ＬａＡ．ＨＡ．Ｂ和ＤｙＡ．ＨＡ．Ｂ计算了协萃取平衡常数，研究了温度对协萃反应的影响，用萃取法制得了固态协萃合物，并对其组成，ＩＲ及ＴＧ     

1,4-双[4-(2-氨基-5-苯基)噻唑基]苯及其聚酰亚胺的合成及性能

以１ ,４ 双（ 苯乙酰基） 苯为原料,合成了新有机二胺化合物———１ ,４ 双［４ （２ 氨基 ５ 苯基） 噻唑基］ 苯,以此二胺或４ ,４’ 二氨基二苯醚和３ ,３’,４ ,４’ 二苯酮四酸二酐反应制备出新型的聚酰亚胺均聚物和共聚物,研究了它们的耐温性能,耐热氧化性能和共聚物经高温裂解后的导电性能等     

1－苯基－3－甲基－4－（a－呋喃甲酰基）－5－吡唑酮与中性萃取剂协同萃取镱的研究

研究了１－苯基３－甲基－４－（呋喃甲酰基）－５－吡唑酮（ＨＡ）萃取镱及其分别与丁基辛基亚砜（ＢＯＳＯ）、戊基已基亚砜（ＰＨＳＯ）、乙基十二烷基亚砜（ＥＤＳＯ）、二苯亚砜（ＤＰＳＯ）和ＴＢＰ协同萃取镱的行为。协萃配合物的组成为ＹｂＡ＿３·Ｂ，ＨＡ的萃取平衡常数为—５．６４±０．０４，中性萃取剂的协萃能力比单独萃取时高３～４个数量级，协萃效果明显。     

1,3—戊二烯／苯乙烯阳离子共聚合反应

本文研究了以甲苯为溶剂,ＡｌＣｌ３和ＢＦ３·ＯＥｔ２为引发剂,１,３－戊二烯（ＰＤ）与苯乙烯（Ｓｔ）的阳离子共聚合反应,并用红外光谱测定聚合物的微观结构。由共聚单体ＰＤ和Ｓｔ加入顺序的不同可生成无规共聚物Ｐ（ＰＤ－ｃｏ－Ｓｔ）和接枝共聚物Ｐ（ＰＤ－ｇ－Ｓｔ）和Ｐ（Ｓｔ－ｇ－ＰＤ）。无论是由ＡｌＣｌ３引发聚合反应,还是由ＢＦ３·ＯＥｔ２引发聚合反应,Ｓｔ上的碳阳离子的活性都高于ＰＤ上碳阳离子的活性。由ＡｌＣｌ３首先引发ＰＤ进行聚合反应,结束后再引入Ｓｔ时,聚合体系不能引发Ｓｔ聚合反应;相反ＡｌＣｌ３首先引发Ｓｔ聚合后的体系能继续引发ＰＤ的聚合反应。ＢＦ３·ＯＥｔ２无论先引发Ｓｔ或是ＰＤ,都能在聚合反应完成后接着引发另一单体而生成接枝共聚物Ｐ（ＰＤ－ｇ－Ｓｔ）和Ｐ（Ｓｔ－ｇ－ＰＤ）。二苯醚与烯丙基氯的加入,提高了碳阳离子的稳定性,增加了聚合物的分子量,但降低了碳阳离子的活性,使得聚合反应的产率降低,同时对Ｓｔ和ＰＤ碳阳离子的活性次序无明显影响     

配位滴定法连续测定铁铝钛的研究及应用：5Br—PADAP作指示剂

以５－Ｂｒ－ＰＡＤＡＰ作指示剂，ＰＨ１．８－２．２ＥＤＴＡ滴定铁（Ⅲ）；用过量的ＥＤＴＡ在ＰＨ３煮沸下与钛和铝生成稳定的配合物，再以苦杏仁酸，氟化钾分别置换Ｔｉ－ＥＤＴＡ，Ａｌ－ＥＤＴＡ配合物中的ＥＤＴＡ，用硫酸铜回滴法于ＰＨ４．８分别测定钛和铝。     

Synthesis of benzophenone tetracarboxylic dianhydride and pyromellitic dianhydride incorporated biscitraconimides and their thermal polymerization

Biscitraconimides incorporated with 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA) and pyromellitic dianhydride (PMDA) were synthesised. Their curing behavior as well as thermal stabilities were investigated. The intermediate amic acids were prepared by the reaction of 4-amino 4′-citraconamic acid diphenyl sulphone, 4-amino 4′-citraconamic acid diphenyl ether, and 12-amino 1-citraconamic acid dodecane with BTDA and PMDA, respectively. Six amic acids formed were then imidized by cyclocondensation with acetic anhydride. The imide monomers were obtained and these were cured at 225–240°C. The thermal stabilities of the polymers so formed were investigated and compared. © 1996 John Wiley & Sons, Inc.     

Novel organosoluble polyimide based on an asymmetric bis(ether amine): 3, 4′-Bis(4-aminophenoxy)-benzophenone

A new kind of asymmetrical ether diamine,3,4’-bis（4-aminophenoxy）benzophenone（BABP）,was synthesized from the nucleophilic substitution reaction of 4-chloronitrobenzene and 3,4’-dihydroxybenzophenone in the presence of potassium carbonate,followed by catalytic reduction with SnCl₂-6H₂O and concentrated hydrochloric acid.The prepared diamine was employed in the preparation of a novel polyimide containing asymmetrical diaryl ether segments via the polycondensation of it with BTDA by a two-step method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal resistance.     

聚芳醚酮的合成及其性能

本文研完了以1,2-二氯乙烷为溶剂,三氯化铝为催化剂,在一般条件下从二苯醚和间苯二甲酰氯合成高分子量聚芳醚酮(简称PEK)的方法;寻找出硝基苯脱催化剂提纯聚合物的有效途径;红外光谱表明醚的芳环上邻位和对位都参与了反应;测试了PEK的主要物理、化学性能。     

Controlled sulfonation of poly(arylene ether sulfone)s and poly(arylene ether ketone)s with different molecular structures for polymer electrolyte membranes

Poly(arylene ether sulfone) copolymers derived from 9,9-bis(4-hydroxyphenyl)fluorene, bisphenol S and 4,4′-difluorodiphenylsulfone and poly(arylene ether ketone) copolymers derived from 4-phenoxybiphenyl, diphenyl ether and isophthaloyl chloride were prepared as precursor polymers for sulfonation reaction in which sulfonic groups are introduced quantitatively into specified positions. Sulfonation reaction for these two series of copolymers by concentrated sulfuric acid was successfully carried out to give sulfonated polymers with controlled positions and degree of sulfonation. Thermal stability, moisture absorption and proton conductivity for these two series of copolymers were measured and the results were compared to those of perfluorosulfonic acid polymers.     

Gas-phase reactions of brominated diphenyl ethers with OH radicals

A small volume reaction chamber coupled to a mass spectrometer was used to study the gas-phase kinetics and mechanism of the reaction of OH radicals with diphenyl ether and seven polybrominated diphenyl ethers (PBDEs) with 1-2 bromines. Relative rate constants for these reactions were determined using isopropyl nitrite photolysis in He-air mixtures at approximately 740 Torr between the temperatures of 326-388 K. The Arrhenius expression for each compound was used to extrapolate the following OH rate constants at 298 K (in units of 10(-12) cm3 molecule(-1) s(-1), with 95% confidence intervals): diphenyl ether, 7.45 +/- 0.13; 2-bromodiphenyl ether, 4.7; 3-bromodiphenyl ether, 4.6; 4-bromodiphenyl ether, 5.7; 2,2'-dibromodiphenyl ether, 1.3; 2,4-dibromodiphenyl ether, 3.8; 3,3-dibromodiphenyl ether, 3.2; and 4,4'-bromodiphenyl ether, 5.1. The measured OH rate constants are in reasonable agreement with those predicted by structure activity relationships. Positive temperature dependences of these OH rate constants are observed for all compounds measured except for diphenyl ether and 4,4'-dibromodiphenyl ether. Bromophenols (in yields up to 20% relative to the amount of PBDE consumed) and Br2 were characterized as products of these reactions, suggesting that OH addition to ipso positions of these brominated aryls may be an important reaction pathway.     

Synthesis and characterization of 3-phenylethynyl endcapped matrix resins

The synthesis of 3-phenylethynylphenol, and its applicability as a high temperature cross-linking endcap for high T_g polyarylene ethers is described. It was synthesized in high yields and purity using the palladium catalyzed coupling reaction between the protected 3-bromo or iodo phenol and phenylacetylene. The yield of the reaction was found to be highly dependent on the structure of the halide used, the reaction temperature, and the concentration of phenylacetylene. The use of the protected phenol in the palladium catalyzed reaction was also extended to the high yield synthesis of 3-ethynylphenol and protected 4-ethynylphenols. The complete synthesis of 3-phenylethynylphenol, 3-ethynylphenol, and protected 4-ethynylphenol in high yields has been demonstrated and is discussed herein. Three new phenylethynyl functionalized arylene ether matrix resins have been synthesized in high yields and purity by reacting 3-phenylethynylphenol with 4,4′-dichlorodiphenyl sulfone, 4,4′-difluorobenzophenone, and bis(4-fluorophenyl)phenyl phosphine oxide, via nucleophilic poly(arylene ether) synthesis conditions. These low molecular weight materials undergo thermally induced chain extension/branching to yield an insoluble three-dimensional network at reaction temperatures of around 380°C. The low molecular weight arylene ethers endcapped with the phenylethynyl group demonstrate excellent flow characteristics and a wide processing window of about 250°C. Crosslinking of the 4,4′-bis(3-phenylethynyl phenoxy)diphenyl sulfone system for 30 min at 350°C in air afforded a T_g value of 265°C by differential scanning calorimetry measurements. Trace metal analysis for palladium and copper showed absence of these metals that would otherwise detract from the excellent thermal stability. The synthesis and characterization of these phenylethynyl endcapped arylene ether matrix resins is discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis, magnetic behaviour, and X-ray structures of dinuclear copper complexes with multiple bridges. Efficient and selective catalysts for polymerization of 2,6-dimethylphenol

The use of a potentially tridentate mono-anionic bridging ligand, 1,3-bis(3,5-dimethylpyrazol-1-yl)-propan-2-ol (bdmpp-H), in assembling new dimeric copper complexes with interesting magnetic properties has been investigated. The reaction of copper hydroxide or copper acetate with phenyl phosphinic acid or diphenyl phosphinic acid in the presence of bdmpp-H produces the dinuclear complexes [Cu(bdmpp)(ppi)]2 (1) and [Cu(bdmpp)(dppi-H)]2(dppi)2 (2) (ppi-H = phenylphosphinic acid: dppi-H = diphenylphosphinic acid), respectively. The products have been characterized with the help of analytical, thermal, and spectroscopic (IR, UV-vis, and EPR) techniques. Single crystal X-ray diffraction studies of 1 and 2 reveal that the two bdmpp ligands hold together the dimeric copper unit in each complex through mu-O alkoxide and the pyrazolyl nitrogen ligating centers. Two phenyl phosphinate ligands additionally bridge the dicopper core in 1 to result in octahedral coordination geometry around each metal ion. The diphenyl phosphinic acid acts as a terminal ligand in 2, and thus completes a square pyramidal geometry around each copper ion. Both complexes show a very short Cu...Cu separation (3.001 and 3.065 angstroms for 1 and 2, respectively). The investigation of the magnetic properties reveals the efficiency of the double alkoxide bridge between the two paramagnetic copper ions to mediate strong antiferromagnetic interactions [J/k(B) = -620(5) K (-431(4) cm(-1)) and -685(5) K (-476(4) cm(-1)) for 1 and 2, respectively]. Compounds 1 and 2, along with a few other copper phosphate complexes, were tested as catalysts for the oxidative polymerization of 2,6-dimethylphenol; 1 and 2 were found to be efficient catalysts with an increased selectivity for the formation of the polyphenylene ether. However a related mononuclear octahedral copper complex [Cu(imz)4(dtbp)2] (dtbp-H = di-tert-butylphosphate) was found to be more efficient.     

Synthesis of poly(benzylidene phthalide)s: A new class of polymers

Pyromellitic dianhydride (PMDA) was condensed with different aromatic diacetic acids via a Perkin reaction to produce new polymers containing the benzylidenephthalide group in the backbone. Yields ranged from 50 to 90% with inherent viscosities ranging from 0.07 to 0.37 dL/g. Polymerizations at 275°C for 4 h using p-phenylenediacetic acid and PMDA gave the polymer with highest inherent viscosity. However, polymerization under identical conditions of p,p′-diphenyl ether diacetic acid, each with PMDA, yielded poor results. For these two monomers the best polymerization conditions were 250°C for 8 h. In general, the most thermally stable polymer was derived from the diphenyl ether diacetic acid monomer (308°C). This polymer was obtained in highest yields and gave the greatest amount of pyrolytic residue in argon (67%).     

(S,S)N,N'-双(对氯-α-异丙基苄基)-1,10-二氮杂-18-冠-6的合成及其应用

手性冠醚被用作不对称合成的手性试剂,或者成为具有构型识别能力的主体,它们已成为冠醚化学中的一个引人注目的领域。近年来,也有一些关于含氮手性冠醚的报道,但大多数以氨基酸为基本原料。作者应     

Darstellung und isolierung isomerer phenoxaphosphinsäuren

In contrast to literature data, m-chloro, bromo or methyl substituents on diphenyl ethers do not block attack ortho to them in the reaction with phosphorus trichloride and aluminium chloride. By reacting diphenyl ethers 3 and 6 mixtures of the isomeric phenoxaphosphinic acids 4/5 and 7/8 were obtained, which were easily separated by crystallisation.