Photochemical defluorinative functionalization of α-polyfluorinated carbonyls via spin-center shift

<正>Organic molecules containing gem–difluoromethylene unit are one of the most important classes of compounds that have various valuable applications ranging from drug discovery to material science [1]. Not surprisingly, numerous strategies have been developed towards the synthesis of these target organofluorine compounds. Within this research area, direct C–F bond cleavage of cheap and readily accessible polyfluorinated compounds represents one of the most potentially powerful methods to ...     

Recent advances in the application of sulfinic acids for the construction of sulfur-containing compounds

Sulfur-containing organic compounds display wide applications in the field of materials science, synthetic chemistry, and pharmaceutical industry. Thus, numerous synthetic strategies have been developed for the synthesis of sulfur-containing compounds in synthetic chemistry. In recent years, the utilization of sulfinic acids as versatile synthons has emerged as attractive and powerful approach to access various organosulfur compounds through sulfonylation, sulfinylation or sulfenylation reaction...     

Vanadium-based compounds and heterostructures as functional sulfur catalysts for lithium-sulfur battery cathodes

Lithium-sulfur(Li-S) batteries have attracted wide attention for their high theoretical energy density, low cost, and environmental friendliness. However, the shuttle effect of polysulfides and the insulation of active materials severely restrict the development of Li-S batteries. Constructing conductive sulfur scaffolds with catalytic conversion capability for cathodes is an efficient approach to solving above issues.Vanadium-based compounds and their heterostructures have recently emerged as f...     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

C–F bond activation under transition-metal-free conditions

The unique properties of fluorine-containing organic compounds make fluorine substitution attractive for the development of pharmaceuticals and various specialty materials, which have inspired the evolution of diverse C–F bond activation techniques.Although many advances have been made in functionalizations of activated C–F bonds utilizing transition metal complexes,there are fewer approaches available for nonactivated C–F bonds due to the difficulty in oxidative addition of transition metals to the inert C–F bonds. In this regard, using Lewis acid to abstract the fluoride and light/radical initiator to generate the radical intermediate have emerged as powerful tools for activating those inert C–F bonds. Meanwhile, these transition-metal-free processes are greener, economical, and for the pharmaceutical industry, without heavy metal residues. This review provides an overview of recent C–F bond activations and functionalizations under transition-metal-free conditions. The key mechanisms involved are demonstrated and discussed in detail. Finally, a brief discussion on the existing limitations of this field and our perspective are presented.     

Carbon–sulfur bond formation via photochemical strategies: An efficient method for the synthesis of sulfur-containing compounds

The development of green and convenient methods for C–S bond formation has received significant attention because C–S bond widely occurs in many important pharmaceutical and biological compounds.Recently, visible-light photoredox catalysis has been established as an efficient and general tool for the construction of C–C and C-heteroatom bonds. In this review, we have focused on the research on recent advances in C–S bond formation via visible-light photoredox catalysis, and the growing opportuni...     

Vanadium-based polyanionic compounds as cathode materials for sodium-ion batteries:Toward high-energy and high-power applications

Sodium ion batteries(SIBs)have been regarded as one of the alternatives to lithium ion batteries owing to their wide availability and significantly low cost of sodium sources.However,they face serious challenges of low energy&power density and short cycling lifespan owing to the heavy mass and large radius of Na⁺.Vanadium-based polyanionic compounds have advantageous characteristic of high operating voltage,high ionic conductivity and robust structural framework,which is conducive to their high energy&power density and long lifespan for SIBs.In this review,we will overview the latest V-based polyanionic compounds,along with the respective characteristic from the intrinsic crystal structure to performance presentation and improvement for SIBs.One of the most important aspect is to discover the essential problems existed in the present V-based polyanionic compounds for high-energy&power applications,and point out most suitable solutions from the crystal structure modulation,interface tailoring and electrode configuration design.Moreover,some scientific issues of V-based polyanionic compounds shall be also proposed and related future direction shall be provided.We believe that this review can serve as a motivation for further development of novel V-based polyanionic compounds and drive them toward high energy&power applications in the near future.     

Crystal structures,thermal behavior and biological activities of lanthanide compounds with 2,4-dichlorobenzoic acid and 1,10-phenanthroline

Five new binuclear lanthanide compounds [Ln(2,4-DClBA)3phen]2(Ln = Pr(1), Eu(2), Tb(3), Ho(4) and Er(5); 2,4-DClBA = 2,4-dichlorobenzoate; phen = 1,10-phenanthroline) have been synthesized and structurally characterized by X-ray crystallography. And all of them were carefully investigated by elemental analysis, molar conductance, IR, UV and TG/DSC-FTIR technology. Single-crystal X-ray diffraction studies revealed that compounds 1–5 were binuclear molecules with an inversion center and the Ln3+ ions contained two kinds of coordination environment that was a distorted monocapped square-antiprism in the compounds 1–2, and a distorted square-antiprism geometry in the compounds 3–5. The 3D surface graphs for the FTIR spectra of gaseous products for the compounds 1–5 were recorded using simultaneous TG/DSC-FTIR technique which is intended to further analysis of the thermal decomposition processes. Hence the gaseous products were identified by the solved single IR spectra obtained at different temperatures from the 3D surface graphs. Furthermore, the Eu(Ш) and Tb(Ш) ternary compounds exhibited intense luminescence under the radiation of UV light. And the results for antimicrobial test show that these compounds exhibit good bacteriostatic activity against Staphylococcus aureus, and better antimicrobial activity against Escherichia coli and Candida albicans.     

Scission of C–O and C–C linkages in lignin over RuRe alloy catalyst

The performance of lignin depolymerization is basically determined by the interunit C–O and C–C bonds.Numerous C–O bond cleavage strategies have been developed, while the cleavage of C–C bond between the primary aromatic units remains a challenging task due to the high dissociation energy of C–C bond.Herein, a multifunctional Ru Re alloy catalyst was designed, which exhibited exceptional catalytic activity for the cleavage of both C–O and C–C linkages in a broad range of lignin model compounds(β...     

Synthesis and properties of novel photochromic bisthienylethenes containing imidazole and imidazolium derivatives

A series of bisthienylethenes containing imidazole and imidazolium derivatives have been prepared and the products have been characterized by means of NMR and MS.Their photochromic and fluorescent switch properties have been investigated by UV–vis absorption spectra and fluorescence spectra.The fluorescent emissions of these kinds of photochromic compounds can be simply modulated by varying the imidazole groups,which shows that these compounds may have potential application in the design of fluorescent photochromic materials.     

Analysis of nitrobenzene compounds in water and soil samples by graphene composite-based solid-phase microextraction coupled with gas chromatography–mass spectrometry

In this work, solid-phase microextraction coupled with gas chromatography–mass spectrometry was developed to determine trace levels of nitrobenzene compounds in water and soil samples. Graphene was chosen as the extraction material and its composite was coated on a stainless steel wire through sol–gel technique for the solid phase microextraction. The key parameters influencing the extraction efficiency were optimized. Under the optimal conditions, the linearity for the compounds was observed in the range of 0.02–15.0 mg/L for water samples, and 0.2–60.0 mg/kg for soil samples, with the correlation coefficients（r） of 0.9966–0.9987. The limits of detection of the method were 0.0025–0.005 mg/L for water samples, and 0.02–0.04 mg/kg for soil samples. The recoveries for the spiked samples were in the range of 72.0%–113.2%, and the precision, expressed as the relative standard deviations, was less than 12.1%.     

Cleavage/cross-coupling strategy for converting β-O-4 linkage lignin model compounds into high valued benzyl amines via dual C–O bond cleavage

Lignin is the most recalcitrant of the three components of lignocellulosic biomass. The strength and stability of the linkages have long been a great challenge for the degradation and valorization of lignin biomass to obtain bio-fuels and commercial chemicals. Up to now, the selective cleavage of C–O linkages of lignin to afford chemicals contains only C, H and O atoms. Our group has developed a cleavage/crosscoupling strategy for converting 4-O-5 linkage lignin model compounds into high value-a...     

Facile Synthesis of Ureas in Ionic Liquid

The urea functional group is of importance in a wide range of biological compounds such as enzyme inhibitors1 and pseudopeptides2. Substituted ureas are widely applied in fine chemical industry, especially pesticides3 and pharmaceuticals4. Many investigations have been made to search for an efficient and practical method to synthesize ureas. The typical procedure for the synthesis of ureas is treating isocyanates with primary or secondary amines in organic solvents5. In the presence of trans…     

Cleavage/cross-coupling strategy for converting β-O-4 linkage lignin model compounds into high valued benzyl amines via dual C–O bond cleavage

Lignin is the most recalcitrant of the three components of lignocellulosic biomass. The strength and stability of the linkages have long been a great challenge for the degradation and valorization of lignin biomass to obtain bio-fuels and commercial chemicals. Up to now, the selective cleavage of C–O linkages of lignin to afford chemicals contains only C, H and O atoms. Our group has developed a cleavage/crosscoupling strategy for converting 4-O-5 linkage lignin model compounds into high value-a...     

Syntheses and Crystal Structures of Bis-[oxo-bis(p-ferrocenylbenzoxy di-n-propyltin)](I) and Bis[oxo-bis(β-ferrocenoylpropionyloxy di-n-propyltin )](II)

1 INTRODUCTION The studies of organotin compounds are of current interest owing to their wide range of applications such as biocides and thermal stabilizers for PVC plastic etc. Besides, the pharmaceutical properties such as the antitumor activities of organotin carboxylates have been investigated[1, 2]. In recent years, reports of synthesis and structural elucidation of various organotin carboxylic esters have appeared, revealing various new structural possibilities[3]. Since Kealy an…     

Triarylamines with branched multi-pyridine groups: modulation of emission properties by structural variation,solvents, and tris(pentafluorophenyl)borane

Six triarylamine derivatives 1–6 with branched multi-pyridine substituents were prepared and characterized. These compounds are distinguished by the substituent on one of the phenyl group with NO2 for 1, CN for 2, Cl for 3, p-C6 H4 OMe for 4, OMe for 5,and NMe2 for 6, respectively. As revealed by single crystal X-ray analysis, these substituents play an important role in determining the configuration of the triarylamine framework and the crystal packing of 1–6. The emission properties of these compounds were examined in different solvents(toluene, CH2 Cl2, acetone, tetrahydrofuran(THF), and N,N-dimethylformamide(DMF)) and in solid states. Distinct dual emissions from the localized emissive state and the intramolecular charge transfer state were observed for compound 5 in CH2 Cl2. Compounds 1 and 6 show apparent aggregated enhanced emissions in acetone/H2 O.The emission properties of these compounds were further modulated by the addition of tris(pentafluorophenyl)borane. In addition, density functional theory(DFT) and time-dependent DFT(TDDFT) calculations have been performed on the ground and singlet excited states to complement the experimental findings.     

A Novel Synthesis of β-Hydroxy-α-amino Acids

β-hydroxy-α-amino acids constitute an important class of compounds as naturally occurring amino acids and as components of many complex natural products possessing a wide range of biological activities. [1] As a consequence of the essential role played by these amino acids in the biological systems and their utility as synthetic building blocks, a number of useful strategies have been devised for their preparation. [2]     

Vanadium-based cathodes for aqueous zinc ion batteries: Structure,mechanism and prospects

As an emerging energy storage device with high-safety aqueous electrolytes, low-cost, environmental benignity and large-reserves, the rechargeable aqueous zinc-ion batteries(AZIBs) have attracted more and more attention. Vanadium-based compounds are also supposed as the potential candidate cathode materials for AZIBs due to their wide variety of phases, variable crystal structures and high theoretical capacity. In this review, the recent progress in the development of vanadium-based materials wa...     

DESORPTION OF VOCs FROM POLYMERIC ADSORBENTS UNDER MICROWAVE FIELD

1. INTRODUCTION Nowdays the volatile organic compounds (VOCs) have become important pollutants to air [1]. The source of these wastes is very wide. The leakage of the VOCs from chemical and pharmaceutical manufacturing, printing processes, paint and adhesive manufacturing and applications, composites and fiberglass molding etc. is the source of the pollutants. A number of adsorbents are capable of capturing a wide range of VOCs. However, the conventional process of regenerating …     

EFFECT OF IONIC RADII ON UNIT-CELL VOLUMES OF ISOSTRUCTURAL COMPOUNDS

The relation between cell-edges or unit-cell volumes of isostructural compounds and theionic radii has wide applications in crystal chemistry. The authors have proved: (1) For a series of multiple isostructural compounds such as A_mB_n…X_p, when the anionand other cations are fixed, there exists the following relation between the unit-cell volume Vand the radius r_A of a certain cation such as A: V = (a + br_A)(r_X + r_A)~3 (a and b are constants). (2) For binary isostructural compounds A_mX_p, the above relation is reduced to V = k(r_X + r_A)~3 (k is a constant). (3) For binary isostructural compounds the relation between V and r_A~3 is approximatelylinear, and for multiple compounds, it is often curvilinear but still approximately linear whenthe variation of r_A is slight. As another approximation, a linear relation also exists betweenV and r_A for isostructural compounds. (4) The relation of ce1l-edge a vs. r_A is linear for binary isostructural compounds. Butno such a good linear relation exists fo