A novel conjugate of a cell-penetrating peptide and a ferrocenyl amino acid: a potential electrochemical sensor for living cells?

The conjugation of a ferrocenyl amino acid to the cell-penetrating peptide hCT(9-32) does not impair its ability to efficiently translocate into cells. Furthermore, the bioconjugate does not induce any cytotoxicity, thus presenting a potential electrochemical sensor suitable for the detection of living cells.     

The π-hole tetrel bond between X2TO and CO2: Substituent effects and its potential adsorptivity for CO2

Quantum chemical calculations are applied to study the complexes between X₂TO (X = H, F, Cl, Br, CH₃; T = C, Si, Ge, Sn) and CO₂. The carbon atom of CO₂ as a Lewis acid participates in the C···O carbon bond, whereas its oxygen atom as a base engages in the O···T tetrel bond with X₂TO. Most of complexes are stabilized by a combination of both C···O and O···T interactions. The interaction energy increases in the T = C < Ge < Sn < Si sequence for most complexes. Both the electron-withdrawing halogen group and the electron-donating methyl group increase the interaction energy, up to 51 kJ/mol in F₂SiO···CO₂. One F₂SiO molecule can bind with different numbers of CO₂ molecules (1–4); as the number of CO₂ molecules increases, the average interaction energy for each CO₂ decreases and each CO₂ molecule can contribute with at least 27 kJ/mol. Therefore, silicon-containing molecules are good absorbents for CO₂.     

Ni-Catalyzed Cross-Coupling of 2-Iodoglycals and 2-Iodoribals with Grignard Reagents: A Route to 2-C-Glycosides and 2’-C-Nucleosides

The synthesis of 2-C-glycals and 2-C-ribals was achieved in good yields using a nickel-catalyzed cross-coupling between 2-iodoglycals and 2-iodoribal respectively and Grignard reagents. The prepared 2-C-glycals and ribals were then transformed into 2-C-2-deoxyglycosides, 2-C-diglycosides and 2’-C-2’-deoxynucleosides. The developed method was applied to the synthesis of a 2-chloroadenine 2’-deoxyribonucleoside – a structural analogue of cladribine (Mavenclad®, Leustatin®) and clofarabine (Clolar®, Evoltra®), two compounds used in the treatment of relapsing-remitting multiple sclerosis and hairy cell leukemia.     

A comparison between the potential energy curves for the X1Σg+ state of H2 and D2

The electronic potential for the ground state of H₂ and D₂, molecules has been calculated from spectroscopic molecular constants. Numerical integration of the radial wave equation gives accurate self-consistent values (an eigenvalue mean deviation of about 1 cm⁻¹). A comparison between different potentials is reported.     

A high performance method for thermodynamic study on the binding of copper ion and glycine with Alzheimer’s amyloid β peptide

The interaction of Cu²⁺ to the first 16 residues of the Alzheimer’s amyloid β peptide, Aβ(1–16) was studied by isothermal titration calorimetry at pH 7.2 and 37°C in aqueous solution. The Gholamreza Rezaei Behbehani (GRB) solvation model was used to reproduce the enthalpies of interactions of Aβ(1–16) with glycine, Gly+Aβ(1–16), and Cu²⁺ ions, Cu²⁺ +Aβ(1–16), over the whole range of Cu2+ concentrations. The binding parameters recovered from the solvation model were attributed to the structural change of Aβ(1–16) due to the glycine and Cu²⁺ interactions. It was found that there is a set of two identical binding sites for Cu²⁺ ions. p=2 indicates that the binding has positive cooperativity in the two binding sites. Aβ(1–16) structure is destabilized greatly as a result of binding to Cu²⁺ ions.     

Azulenoisoindigo: A building block for π-functional materials with reversible redox behavior and proton responsiveness

Azulene, one of representative nonbenzenoid aromatic hydrocarbons, exhibits unique molecular structure and distinctive physical and chemical properties. Herein, azulenoisoindigo（Az II）, an azulene-based isoindigo analogue, is designed and synthesized, which has a twisted molecular backbone and R/Sisomers in single crystals. Interestingly, Az II shows the characteristics of both isoindigo and azulene,such as reversible redox behavior and reversible proton responsiveness. UV-vis-NIR,¹ H...     

LiBr/β-CD/IBX/H2O-DMSO: A new approach for one-pot biomimetic regioselective ring opening of chalcone epoxides to bromohydrins and conversion to 1,2,3-triketones

Highly regioselective ring cleavage of chalcone epoxides to bromohydrins has been carried out in good yields with LiBr in the presence of β-CD using DMSO-H₂O as solvent system. The ring-opened product, i.e., bromohydrin, was well adapted to IBX-mediated oxidation in such a fashion that the bromohydrins are transformed to their corresponding 1,2,3-triketones in moderate-to-good yields in one pot.     

1:1 and 1:2 Inclusion Complexes of Di-tert-butyl l-tartrate with α-Cyclodextrin: A Diffusion Study

The diffusion properties at two overall compositions of a ternary aqueous system containing α-cyclodextrin and a double-functional guest molecule, namely di-tert-butyl l-tartrate, have been studied by means of the Gouy interferometry. The experimental data are interpreted in terms of two independent chemical equilibria involving inclusion compounds. The elements of the diffusion coefficient matrix have been expressed as functions of the two equilibrium constants as well as of the diffusivities of the actual species occurring in solution. The reliability of the diffusion coefficients obtained through the Fujita–Gosting–Revzin procedure is also discussed in terms of its dependence on the composition of solutions used in the Gouy experiments.     

Resorcylic acid lactones: A pluripotent scaffold with therapeutic potential

The recent discoveries of potent HSP90 and MAP kinase inhibitors amongst the resorcylic acid lactones (RALs) have revived interest in this family of natural products. Both HSP90 and MAP kinase inhibition hold tremendous therapeutic potential, particularly in the treatment of cancer. Our synthetic efforts towards the RALs and, in particular, selective inhibitors of HSP90 and kinases are reviewed.     

A minimal peptide scaffold for beta-turn display: optimizing a strand position in disulfide-cyclized beta-hairpins.

Phage display of peptide libraries has become a powerful tool for the evolution of novel ligands that bind virtually any protein target. However, the rules governing conformational preferences in natural peptides are poorly understood, and consequently, structure-activity relationships in these molecules can be difficult to define. In an effort to simplify this process, we have investigated the structural stability of 10-residue, disulfide-constrained beta-hairpins and assessed their suitability as scaffolds for beta-turn display. Using disulfide formation as a probe, relative free energies of folding were measured for 19 peptides that differ at a one strand position. A tryptophan substitution promotes folding to a remarkable degree. NMR analysis confirms that the measured energies correlate well with the degree of beta-hairpin structure in the disulfide-cyclized peptides. Reexamination of a subset of the strand substitutions in peptides with different turn sequences reveals linear free energy relationships, indicating that turns and strand-strand interactions make independent, additive contributions to hairpin stability. Significantly, the tryptophan strand substitution is highly stabilizing with all turns tested, and peptides that display model turns or the less stable C'-C' ' turn of CD4 on this tryptophan "stem" are highly structured beta-hairpins in water. Thus, we have developed a small, structured beta-turn scaffold, containing only natural L-amino acids, that may be used to display peptide libraries of limited conformational diversity on phage.     

A new molecular scaffold for the formation of supramolecular peptide double helices: the crystallographic insight

[structure: see text]. A series of water-soluble synthetic dipeptides (1-3) with an N-terminally located beta-alanine residue, beta-alanyl-l-valine (1), beta-alanyl-l-isoleucine (2), and beta-alanyl-l-phenylalanine (3), form hydrogen-bonded supramolecular double helices with a pitch length of 1 nm, whereas the C-terminally positioned beta-alanine containing dipeptide (4), l-phenylalanyl-beta-alanine, does not form a supramolecular double helical structure. beta-Ala-Xaa (Xaa = Val/Ile/Phe) can be regarded as a new motif for the formation of supramolecular double helical structures in the solid state.     

Electrospun nanofibers of ZnO‐TiO2 hybrid: characterization and potential as an extracellular scaffold for supporting myoblasts

One‐dimensional nanofibers have attracted tremendous attention because of their potential applications. Electrospinning technology enables industrial production of these nanofibers. This study aims to fabricate one‐dimensional ZnO doped TiO₂ by electrospinning and to characterize these hybrid nanofibers. The nanocomposite was prepared using colloidal gel composed of zinc nitrate, titanium isopropoxide and polyvinyl acetate. X‐ray diffraction, energy dispersive x‐ray analysis and transmission electron microscopy analysis confirmed the purity and crystalline nature of this material, whereas the diameter of these nanofibres estimated from scanning electron microscope (SEM), field emission SEM and transmission electron microscopy are between 200 and 300 nm. Cell counting with Kit‐8 assay at regular time intervals and phase‐contrast microscopy data revealed that C2C12 cells proliferated well on ZnO/TiO₂ nanofibers between 1 and 10 µg/ml, and cellular attachments are visible by SEM. The nanostructured ZnO/TiO₂ hybrid nanofibers show higher cell adhesion, proliferation and spreading behavior compared with the titanium substrate and control. Our study suggests that ZnO/TiO₂ nanofibers could potentially be used in tissue engineering applications. The scalability, low cost, reproducibility and high‐throughput capability of this technology is potentially beneficial to examine and optimizing a wide array of cell‐nanofiber systems prior to in vivo experiments. Copyright © 2013 John Wiley & Sons, Ltd.     

A useful scaffold based on acenaphthene exhibiting Cu2+ induced excimer fluorescence and sensing cyanide via Cu2+ displacement approach

A new simple organic scaffold based on acenaphthene 4 was designed and synthesized. The chromogenic and fluorogenic properties of 4 toward different metal ions and anions were investigated in H₂O/MeCN (8:2, v/v) solution. The probe 4 in the presence of Cu²⁺ exhibited strong static excimer emission at 507 nm along with a decrease in monomer emission at ～400 nm ratiometrically, attributed to a complexation through aldimine and amide groups of 4. Additionally, 4 upon interaction with different anions illustrated significant fluorescence enhancement with cyanide. However, interaction of complex, 4-Cu²⁺ with CN^? revealed fluorescence quenching attributed to formation of stable [Cu(CN)_x]^1?x species in the medium. A naked-eye sensitive fluorescent green color of solution was changed to blue. The mechanism of interaction between 4 and Cu²⁺ and sensing of cyanide through Cu²⁺ displacement approach was confirmed by the change in optical behaviors and ¹H NMR and ESI-MS spectral data analysis.     

Asymmetric synthesis of highly substituted azapolycyclic compounds via 2-alkenyl sulfoximines: potential scaffolds for peptide mimetics

The application of metalated, enantiomerically pure acyclic and cyclic 2-alkenyl sulfoximines for the synthesis of highly substituted aza(poly)cyclic ring systems is described. The method relies on a one-pot combination of a reagent-controlled allyl transfer reaction to alpha- or beta-amino aldehydes, followed by a Michael-type cyclization of the intermediate vinyl sulfoximines generated in the first step. The sulfur-free target compounds are preferentially obtained by samarium iodide treatment of the sulfonimidoyl substituted heterocycles. In addition to this methodological work, initial results on the biological activity of selected examples are reported. Furthermore, a concept for the transformation of peptidic lead structures into non-peptide mimetics is described, and the relevance of the new approach to highly substituted azaheterocycles in this context is discussed.     

A hybrid nano-assembly with synergistically promoting photothermal and catalytic radical activity for antibacterial therapy

It is of great significance to develop effective antibacterial agents and methods to combat drug resistant bacterial infections due to its increasing threaten to human health and the ineffectiveness of antibiotics. Herein, a multifunctional hybrid nano-assembly (M1-Fe NPs) based on conjugated oligomer and ferrous ion was engineered with favorable bactericidal activity for synergetic antibacterial therapy. The chelation of ferrous ion not only enhances the photothermal conversion efficiency of M1 but also endows the nano-assembly with catalytic capability of transferring H₂O₂ into stronger oxidant hydroxyl radicals (^?OH). Meanwhile, the generated heat can further promote the Fenton reaction activity. By generating cytotoxic heat and oxidative ^?OH, M1-Fe NPs can effectively kill Staphylococcus aureus in vitro and in vivo with the aid of low dosage of H₂O₂. The work provides a new multifunctional platform for combinational drug resistant antibacterial therapy and even antitumor therapy.     

Genipin‐crosslinked gelatin hydrogel incorporated with PLLA‐nanocylinders as a bone scaffold: Synthesis,characterization, and mechanical properties evaluation

Nowadays, despite remarkable progress in developing bone tissue engineering products, the fabrication of an ideal scaffold that could meet the main criteria, such as providing mechanical properties and suitable biostability as well as mimicking the bone extracellular matrix, still seems challenging. In this regard, utilizing combinatorial approaches seems more beneficial. Here, we aim to reinforce the mechanical characteristics of gelatin hydrogel via a combination of Genipin‐based chemical cross‐linking and incorporation of the poly l ‐lactic acid (PLLA) nanocylinders for application as bone scaffolds. Amine‐functionalized nanocylinders are prepared via the aminolysis procedure and incorporated in gelatin hydrogel. The nanocylinder content (0, 1, 2, 3, and 4 wt%) and cross‐linking density (0.1, 0.5, and 1 wt/vol%) are optimized to achieve suitable morphology, swelling ratio, degradation rate, and mechanical behaviors. The results indicate that hydrogel scaffold cross‐linking by 0.5 wt% of Genipin shows optimized morphological feathers with a pore size of around 300 to 500 μm as well as an average degradation rate (40.09% ± 3.08%) during 32 days. Besides, the incorporation of 3 wt% PLLA nanocylinders into the cross‐linked gelatin scaffold provides an optimized mechanical reinforcement as compressive modulus, and compressive strength show a 4‐ and 2.6‐fold increase, respectively. 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay indicates that the scaffold does not have any cytotoxicity effect. In conclusion, gelatin composite reinforced with 3 wt% PLLA nanocylinders cross‐linked via 0.5 wt/vol% Genipin is suggested as a potential scaffold for bone tissue engineering applications.     

A reinforced nanofibrous patch with biomimetic mechanical properties and chondroinductive effect for rotator cuff tissue engineering

Patch augmented surgery has been a feasible technique for rotator cuff repair. An ideal rotator cuff tissue engineering patch should have proper mechanical properties to match the native tendons and sufficient biological effect to promote tendon-bone healing. In this study, kartogenin (KGN)-grafted poly (ether-ester-urethane)urea/gelatin composite nanofibrous patches (PEEUU-GEL-KGN) were fabricated via electrospinning process followed by crosslinking of GEL and covalent grafting of KGN. The optimized PEEUU-GEL-KGN nanofibrous patches exhibited biomimetic mechanical properties, including sufficient tensile strength, non-linear stress-strain profiles, and remarkable elasticity and cyclical properties. In vitro investigations revealed that the patches possessed outstanding biocompatibility and performed a sustained release of KGN for a long time. Modification with GEL and KGN significantly improved hydrophilicity of the patches, promoted the adhesion, spreading, and proliferation of mesenchymal stem cells and upregulated the expression of cartilage-related genes. In vivo studies demonstrated that the implanted PEEUU-GEL-KGN patches effectively improved the tissue cellularity and collagen alignment, accelerated the fibrocartilage regeneration, augmented the biomechanical strength of the repaired enthesis, and reinforced the fixing of the tendon to the bone. Overall, the PEEUU-GEL-KGN patches enhanced tendon-bone healing and resisted rotator cuff re-tear. Therefore, the PEEUU-GEL-KGN patch is a highly promising candidate for rotator cuff tissue engineering.     

Amorphous core/shell Ti-doped SnO2 with synergistically improved N2 adsorption/activation and electrical conductivity for electrochemical N2 reduction

Electrochemical nitrogen reduction reaction (NRR) has been considered as an appealing and sustainable method to produce ammonia from N₂ under ambient conditions, attracting increasing interest. Limited by low solubility of N₂ in water and high stability of NN triple bond, developing NRR electrocatalysts with both strong N₂ adsorption/activation and high electrical conductivity remain challenging. Here, we demonstrate an efficient strategy to develop NRR electrocatalyst with synergistically enhanced N₂ adsorption/activation and electrical conductivity by heteroatom doping. Combining computational and experimental study, the DFT-designed Ti-doped SnO₂ exhibits significantly enhanced NRR performance with ammonia yield rate of 13.09 µg h^?1 mg^?1 at ?0.2 V vs. RHE. Particularly, the Faradaic efficiency reaches up to 42.6%, outperforming most of Sn-based electrocatalysts. The fundamental mechanism for improving NRR performance of SnO₂ by Ti doping is also revealed. Our work highlights a powerful strategy for developing high-activity electrocatalysts for NRR and beyond.