Graphene oxide decorated bimetal (MnNi) oxide nanoflakes used as an electrocatalyst for enhanced oxygen evolution reaction in alkaline media

Precious non-noble metals have been constantly attracting research attention in order to realize an inexpensive, extra active and more stable electrocatalysts in terms of various oxidation states and structures for their applications in oxidation (splitting) of water. In the present work graphene oxide incorporated, MnO₂-NiO composite metal oxide nanoflakes were synthesized on the stainless steel substrate using efficient electrodeposition route in alkaline media and drop casting method with further annealing treatment at 400 °C for 4 h. Initially MnO₂-NiO nanoflakes were deposited using different cyclic sweep rates, later graphene oxide suspension was drop casted on the MnO₂-NiO nanoflakes and subsequently subjected to annealing at 200 °C for 2 h. The prepared electrode material is denoted as GO/MnO₂-NiO/SS and used as an electrocatalyst for oxygen evolution. Field emission scanning electron microscopy, transmission electron microscopy, Energy dispersive electron spectroscopy and X-ray diffraction spectroscopy were used to study the crystalline nature and morphologies of the deposited films. The electrochemical properties of the electrode material were investigated using cyclic voltammetry and linear sweep voltammetry. The electrode exhibits low overpotential and small Tafel slope of 379 mV and 47.84 mVdec⁻¹ at the current density of 10 mA cm⁻² in alkaline (KOH) medium. In addition, the electrode shows a long time stability of 28800 s. Hence, the present study suggests that the GO incorporated Mn-Ni bimetal oxide modified electrode is suitable electrode material for oxygen evolution reaction (OER), owing to its facile preparation, inexpensive, easy handling and high active nature.     

Novel rGO@Fe3O4 nanostructures: An active electrocatalyst for hydrogen evolution reaction in alkaline media

Because of energy crisis, the hydrogen evolution reaction (HER) limits the feasible utilization of water splitting. Herein, we report reduced graphene-oxide (rGO) with Iron-oxide (Fe₃O₄) nanostructures as highly active electrocatalyst for HER. As-prepared [email protected]₃O₄ shows superior electrochemical responses to those of corresponding its monometallic rGO and Fe₃O₄. The overpotential of [email protected]₃O₄ has been achieved as 300 mV at 10 mA/cm² current density with a Tafel slope of 80 mV/dec. The [email protected]₃O₄ nanostructure has its stability for 24 h to reveal long term electrochemical performance.     

Silver supported on Co3O4 modified carbon as electrocatalyst for oxygen reduction reaction in alkaline media

The electroreduction of oxygen was firstly studied on Ag/Co₃O₄–C in alkaline media prepared by depositing Ag on Co₃O₄ modified carbon (Co₃O₄–C). The Ag/Co₃O₄–C composite not only displayed relatively large electrochemical active surface area (ESA), high catalytic activity towards oxygen reduction reaction (ORR), but also exhibited good methanol tolerance and stability in alkaline media. Ag/Co₃O₄–C could be a valuable catalyst for ORR and be applied to alkaline fuel cells and metal–air batteries.     

Ternary layered double hydroxide oxygen evolution reaction electrocatalyst for anion exchange membrane alkaline seawater electrolysis

Anion exchange membrane(AEM) water electrolyzers are promising energy devices for the production of clean hydrogen from seawater. However, the lack of active and robust electrocatalysts for the oxygen evolution reaction(OER) severely impedes the development of this technology. In this study, a ternary layered double hydroxide(LDH) OER electrocatalyst(NiFeCo-LDH) is developed for high-performance AEM alkaline seawater electrolyzers. The AEM alkaline seawater electrolyzer catalyzed by the NiFeCo L...     

NiFe水滑石纳米片阵列负载Ru用于提升碱性电催化析氢和析氧性能

通过离子交换的方式将Ru负载到NiFe水滑石（LDH）纳米阵列表面得到（Ru/NiFe LDH）,Ru的引入显著提升了NiFe LDH的活性比表面积,暴露了更多的活性位点,同时调控了其电子结构,大大提升了其本征催化活性。在碱性条件下,催化析氢反应时仅需50 mV的过电位即可达到10 mA·cm^-2的电流密度,Tafel斜率为52.3 mV·dec^-1。而相同条件下原始NiFe LDH达到10mA·cm^-2的电流密度则需要226 mV的过电位,Tafel斜率为157.5 mV·dec^-1。同时制备的Ru/NiFe LDH也展现出了良好的析氧催化活性,在50 mA·cm^-2的电流密度下,过电位仅为231 mV,而NiFe LDH则需237 mV。Ru/NiFe LDH在长时间的电催化条件下依然能保持良好的工作稳定性。     

NiFe水滑石纳米片阵列负载Ru用于提升碱性电催化析氢和析氧性能

通过离子交换的方式将Ru负载到NiFe水滑石(LDH)纳米阵列表面得到(Ru/NiFe LDH),Ru的引入显著提升了NiFe LDH的活性比表面积,暴露了更多的活性位点,同时调控了其电子结构,大大提升了其本征催化活性。在碱性条件下,催化析氢反应时仅需50 mV的过电位即可达到10 mA·cm^-2的电流密度,Tafel斜率为52.3 mV·dec^-1。而相同条件下原始NiFe LDH达到10mA·cm^-2的电流密度则需要226 mV的过电位,Tafel斜率为157.5 mV·dec^-1。同时制备的Ru/NiFe LDH也展现出了良好的析氧催化活性,在50 mA·cm^-2的电流密度下,过电位仅为231 mV,而NiFe LDH则需237 mV。Ru/NiFe LDH在长时间的电催化条件下依然能保持良好的工作稳定性。     

A novel Ni-Schiff base complex derived electrocatalyst for oxygen evolution reaction

Efficient electrocatalysts for the oxygen evolution reaction (OER) are critical for various energy conversion devices such as metal-air batteries, rechargeable fuel cell, and water splitting for hydrogen production. In this work, a novel non-precious-metal OER catalyst was prepared from the pyrolysis of a Ni-Schiff base complex with thiourea. The derived catalyst is composed of nickel oxide coupled with nickel sulfide loaded on nitrogen-doped carbon matrix (NiO-NiS/N-C), which manifested excellent OER electrocatalytic activity, and an onset potential of 1.54 V vs reversible hydrogen electrode was achieved in alkaline electrolyte. The high performance of as-obtained electrocatalyst was illustrated by fully dispersed active components of NiO coupled with NiS nanoparticles, as well as the strong interaction between NiS, NiO particles, and N-doped carbon substrate. Our findings supply an easier path to fabricate the active catalyst through one-step metal organic framework transformation way and are promising for use in energy conversion systems and also yield new impetus for exploring other non-noble metal catalysts.

Open image in new window

Graphical abstract ?

     

碱性介质中碳纳米管FeNi复合物上电催化析氧反应(英文)

Non-noble metals such as Fe and Ni have comparable electrocatalytic activity and stability to that of Ir and Ru in an oxygen evolution reaction (OER). In this study, we synthesized carbon nanofibers with embedded FeNi composites (FeNi-CNFs) as OER electrocatalysts by a facile route comprising electrospinning and the pyrolysis of a mixture of metal precursors and a polymer solution. FeNi-CNFs demonstrated catalytic activity and stability that were better than that of 20 wt% Ir on Vulcan carbon black in oxidizing water to produce oxygen in an alkaline media. Physicochemical and electrochemical characterization revealed that Fe and Ni had synergistic roles that enhanced OER activity by the uniform formation and widening of pores in the carbon structure, while the CNF matrix also contributed to the increased stability of the catalyst.     

Fabrication of graphene-supported tetraferrocenylporphyrin electrocatalyst for oxygen reduction and its unique electrochemical response in both alkaline and acid media

A novel high-performance non-noble metal electrocatalyst for the oxygen reduction reaction (ORR) was fabricated by anchoring cobalt tetraferrocenylporphyrin (CoFcP) onto poly(sodium-p-styrenesulfonate) modified graphene (PSS-Gr) through solvothermally assisted π–π assembling method. The morphology of the assembled composite was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The interactions between CoFcP moieties and graphene sheets were confirmed by UV–Vis absorption spectroscopy and X-ray photoelectron spectroscopy. The electrocatalytic properties of the CoFcP/PSS-Gr catalyst towards the oxygen reduction reaction were assessed using rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) measurements in both alkaline and acidic media. In addition, cyclic voltammetry and chronoamperometric measurements were utilized to evaluate the catalytic activity and stability of the CoFcP/PSS-Gr composite in alkaline solution. The results showed that CoFcP supported on graphene exhibited an outstanding electrocatalytic performance towards the ORR comparable with commercial Pt/C catalyst in alkaline media, such as high onset potential (0.889 V vs. reversible hydrogen electrode, RHE), half wave potential (0.789 V vs. RHE), better tolerance to methanol, excellent stability (84.1 %, retention after 10000 s), and efficient four-electron pathway. Moreover, the proposed hybrid presented excellent catalytic activity in terms of onset potential (0.72 V vs. RHE) and high-electron transfer number compared with Pt/C in acidic media.     

Preferential Co substitution on Ni sites in Ni–Fe oxide arrays enabling large-current-density alkaline oxygen evolution

Developing low-cost and high-activity transition metal oxide electrocatalysts for an efficient oxygen evolution reaction (OER) at a large current density is highly demanded for industrial application and remains a big challenge. Herein, we report vertically aligned cobalt doped Ni–Fe based oxide (Co–NiO/Fe₂O₃) arrays as a robust OER electrocatalyst via a simple method combining hydrothermal reaction with heat treatment. Density functional theory calculation and XRD Rietveld refinement reveal that Co preferentially occupies the Ni sites compared to Fe in the Ni–Fe based oxides. The electronic structures of the Co–NiO/Fe₂O₃ could be further optimized, leading to the improvement of the intrinsic electronic conductivity and d-band center energy level and the decrease in the reaction energy barrier of the rate-determining step for the OER, thus accelerating its OER electrocatalytic activity. The Co–NiO/Fe₂O₃ nanosheet arrays display state-of-the-art OER activities at a large current density for industrial demands among Fe–Co–Ni based oxide electrocatalysts, which only require an ultra-low overpotential of 230 mV at a high current density of 500 mA cm⁻², and exhibit superb durability at 500 mA cm⁻² for at least 300 h without obvious degradation. The Co–NiO/Fe₂O₃ nanosheet arrays also have a small Tafel slope of 33.9 mV dec⁻¹, demonstrating fast reaction kinetics. This work affords a simple and effective method to design and construct transition metal oxide based electrocatalysts for efficient water oxidation.

Co–NiO/Fe₂O₃ nanosheets featuring Co substitution on Ni sites can effectively regulate electronic structures and exhibit high OER activities with low overpotential (η₅₀₀ = 230 mV), small Tafel slope (33.9 mV dec⁻¹) and superb durability for 300 h.     

Galvanic displacement of Co with Rh boosts hydrogen and oxygen evolution reactions in alkaline media

Journal of Solid State Electrochemistry - The growing energy crisis put an emphasis on the development of novel efficient energy conversion and storage systems. Here we show that surface...     

Implanting Ni into N-doped puffed carbon: A new advanced electrocatalyst for oxygen evolution reaction

Tailored design and synthesis of high-quality electrocatalysts is vital for the advancement of oxygen evolution reaction (OER). Herein, we report a powerful puffing method to fabricate hierarchical porous N-doped carbon with numerous embedded Ni nanoparticles. Interestingly, during the puffing and annealing process, rice precursor with N and Ni sources can be in-situ converted into Ni-embedded N-doped porous carbon (N-PC/Ni) composite. The obtained N-PC/Ni composite possesses a cross-linked porous architecture containing conductive carbon backbone and active Ni nanoparticles electrocatalysts for OER. The pore formation in N-PC/Ni composite is also proposed because of carbothermic reduction. The N-PC/Ni composite is fully studied as electrocatalysts for OER. Due to increased active surface area, enhanced electronic conductivity and reactivity, the designed N-PC/Ni composite exhibits superior OER performance with a low Tafel slope (∼88 mV/dec) and a low overpotential as well as excellent long-term stability in alkaline solution. Our proposed rational design strategy may provide a new way to construct other advanced metal/heteroatom-doped composites for widespread application in electrocatalysis.     

Cobalt and nitrogen codoped porous carbon as superior bifunctional electrocatalyst for oxygen reduction and hydrogen evolution reaction in alkaline medium

Metal (cobalt)/nitrogen codoped carbon was first fabricated by pyrolysis of coordinated “noncarbonizable” polymer as bifunctional catalyst for ORR and HER, which showed better electrocatalytic performances than most bifunctional doped carbon catalysts in alkaline electrolyte.     

Stainless steel supported NiS/CeS nanocomposite for significantly enhanced oxygen evolution reaction in alkaline media

Journal of Solid State Electrochemistry - The discovery of highly active and cost-effective materials capable of catalyzing the oxygen evolution reaction (OER) is essential for water splitting. In...     

Anodically electrodeposited Co+Ni mixed oxide electrode: preparation and electrocatalytic activity for oxygen evolution in alkaline media

Co+Ni mixed oxides on Ni substrate were prepared through anodic electrodeposition from Co(NO₃)₂ and Ni(NO₃)₂ aqueous solutions with five different Co²⁺/Ni²⁺ ratios beside only Co²⁺. By the electrochemical measurements, the optimum performance in electrocatalytic activity for oxygen evolution reaction in alkaline media was obtained on the Co+Ni mixed oxide deposited from the solution containing Co²⁺/Ni²⁺ ratio of 1:1. The mixed oxide is corresponding to about 68 at% Co contents with spinel-type NiCo₂O₄ phase and porosity surface structure. The electrochemical kinetic parameters including exchange current density, Tafel slopes, reaction order with respect to [OH⁻] and standard electrochemical enthalpy of activation were analyzed also. A possible mechanism involving the formation of a physisorbed hydrogen peroxide intermediate in a slow electrochemical step was presented, which accounts for the values of the experimental results.     

Electrochemical behaviour of oxygen reduction on polymer carbon electrodes in alkaline media

The preparation of polymer carbon electrocatalysts by the controlled pyrolysis of polyfurfuryl alcohol polymer is described. The potentiostatic method was used to study the electrochemical behaviour of the oxygen reduction reaction on the prepared catalyst electrodes in potassium hydroxide electrolyte. A pure polymer carbon electrode and a cobalt chloride doped polymer carbon electrode were shown to be active in oxygen reduction, but the electrode containing cobalt chloride seemed the most active. The main reaction product at the pure polymer electrode is hydrogen peroxide, involving two electrons, whereas at a poly(CoCl₂) electrode the reduction process reaches partly its ultimate state, and involves at most three electrons.     

A novel ball-in-ball hollow oxygen-incorporating cobalt sulfide spheres as high-efficient electrocatalyst for oxygen evolution reaction

Transition-metal chalcogenides with hollow nanostructure,especially cobalt sulfides,are considered as the most pro mising non-precious metal catalysts for oxygen evolution reactio n.However,it is difficult to synthesize oxygen-containing cobalt sulphides with hollow structure due to the different physical/chemical properties between metal sulfides and metal cobalts.Herein,we report a novel oxygencontaining amorphous cobalt sulfide ball-in-ball hollow sphere s(Co-S-O BBHS) synthesized by an anion exchange method.Taking advantage of the ball-in-ball hollow structure,the amorphous Co-S-O BBHS shows supe rior oxygen evolution reaction(OER) electrocatalytic performance with a low overpotentiat of285 mV at 10 mA/cm~2,small Tafel slope of 49.67 mV/dec,high Faraday efficiency of 96%,and satisfied durability.Experiments and DFT calculations demonstrate that the introduction of oxygen and sulfur modulates the electronic structure of Co-S-O BBHS,thus enhancing the adsorption of *0(adsorbed 0 species on catalyst surface) intermediate,which greatly boosts the catalytic activity towards OER.This work provides a new strategy for controllable synthe sis of complex hollow structures of transition-metal chalcogenides for OER.