NiSe2 nanoparticles encapsulated in CNTs covered and N-doped TiN/carbon nanofibers as a binder-free anode for advanced sodium-ion batteries

Metal selenides are promising anodes for sodium-ion batteries (SIBs) due to the high theoretical capacity through conversion reaction mechanism. However, developing metal selenides with superior electrochemical sodium-ion storage performance is still a great challenge. In this work, a novel composite material of free-standing NiSe₂ nanoparticles encapsulated in N-doped TiN/carbon composite nanofibers with carbon nanotubes (CNTs) in-situ grown on the surface (NiSe₂@N-TCF/CNTs) is prepared by electrospinning and pyrolysis technique. In this composite materials, NiSe₂ nanoparticles on the surface of carbon nanofibers were encapsulated into CNTs, thus avoiding aggregation. The in-situ grown CNTs not only improve the conductivity but also act as a buffer to accommodate the volume expansion. TiN inside the nanofibers further enhances the conductivity and structural stability of carbon-based nanofibers. When directly used as anode for SIBs, the NiSe₂@N-TCF/CNT electrode delivered a reversible capacity of 392.1 mAh/g after 1000 cycles and still maintained 334.4 mAh/g even at a high rate of 2 A/g. The excellent sodium-ion storage performance can be attributed to the fast Na⁺ diffusion and transfer rate and the pseudocapacitance dominated charge storage mechanism, as is evidenced by kinetic analysis. The work provides a novel approach to the fabrication of high-performance anode materials for other batteries.     

Large-scale Ni-MOF derived Ni_3S_2 nanocrystals embedded in N-doped porous carbon nanoparticles for high-rate Na~+ storage

Metal organic framework(MOF) has been confirmed as the promising precursor to develop the conve rsion-typed anode mate rials of sodium-ion batteries(SIBs) because of the tunable structure design and simple functional modification.Here,we prepare the ultrasmall Ni_3S_2 nanocrystals embedded into N-doped porous carbon nanoparticles using the scalable Ni-MOF as precursor(denoted as Ni_3S_2@NPC).The ultrasmall size of Ni_3S_2 can work for accelerated electro n/ion transfer to facilitate the electrochemical reaction kinetics.Moreover,the robust conductivity network originated from N-doped porous carbon nanoparticles can not only improve the electron conductivity,but also enhance the electrode integrity and stability of the electrode/electrolyte interface.In addition,the N heteroatoms provide extra Na storage sites.Accordingly,the electrode delivers the obviously competitive capacities and high-power output with respect to the currently reported Ni_3S_2/C composites.This study provides a scalable and universal strategy to develop the advanced transition metal sulfides for practically feasible SIBs.     

A Hierarchically Ordered Mesoporous-Carbon-Supported Iron Sulfide Anode for High-Rate Na-Ion Storage

Sodium-ion batteries (SIBs) are promising alternatives to lithium-based energy storage devices for large-scale applications, but conventional lithium-ion battery anode materials do not provide adequate reversible Na-ion storage. In contrast, conversion-based transition metal sulfides have high theoretical capacities and are suitable anode materials for SIBs. Iron sulfide (FeS) is environmentally benign and inexpensive but suffers from low conductivity and sluggish Na-ion diffusion kinetics. In addition, significant volume changes during the sodiation of FeS destroy the electrode structure and shorten the cycle life. Herein, we report the rational design of the FeS/carbon composite, specifically FeS encapsulated within a hierarchically ordered mesoporous carbon prepared via nanocasting using a SBA-15 template with stable cycle life. We evaluated the Na-ion storage properties and found that the parallel 2D mesoporous channels in the resultant FeS/carbon composite enhanced the conductivity, buffered the volume changes, and prevented unwanted side reactions. Further, high-rate Na-ion storage (363.4 mAh g⁻¹ after 500 cycles at 2 A g⁻¹, 132.5 mAh g⁻¹ at 20 A g⁻¹) was achieved, better than that of the bare FeS electrode, indicating the benefit of structural confinement for rapid ion transfer, and demonstrating the excellent electrochemical performance of this anode material at high rates.     

氮掺杂碳层包覆金属钴颗粒与氮掺杂石墨烯纳米复合材料作为高容量锂离子电池负极材料

合成了一种石墨烯基纳米复合材料即：由氮掺杂碳层包覆的金属钴纳米颗粒,充分分散于氮掺杂的石墨烯表面。这种纳米复合材料进一步提高了石墨烯的导电性,增加了石墨烯的储锂容量。该材料被用作锂离子电池负极材料,在性能测试中展现了良好的循环性能,在以100 mA·g^-1的电流密度循环200圈后,放电容量高达950.1 mAh·g^-1,库伦效率约为98%。     

氮掺杂碳层包覆金属钴颗粒与氮掺杂石墨烯纳米复合材料作为高容量锂离子电池负极材料

合成了一种石墨烯基纳米复合材料即：由氮掺杂碳层包覆的金属钴纳米颗粒,充分分散于氮掺杂的石墨烯表面。这种纳米复合材料进一步提高了石墨烯的导电性,增加了石墨烯的储锂容量。该材料被用作锂离子电池负极材料,在性能测试中展现了良好的循环性能,在以100 mA·g^-1的电流密度循环200圈后,放电容量高达950.1 mAh·g^-1,库伦效率约为98%。     

中空核壳结构Ni1.2Co0.8P@N-C钠离子电池负极材料的制备及拉曼研究

本文设计制备了一种新型的氮掺杂碳包覆镍钴双金属磷化物中空核壳结构纳米立方体(Ni_1.2Co_0.8P@N-C)作为钠离子电池负极材料. 该材料以镍钴类普鲁士蓝(PBA)纳米粒子为模板,先后经水热法、磷化法和高温碳化处理后合成. 将其作为活性材料应用在钠离子电池中,该材料展现出优异的循环稳定性,当以100 mA·g^-1的电流密度循环至200圈时,该材料的库仑效率保持在99.3%. 进一步通过对不同电位下Ni_1.2Co_0.8P@N-C材料中的氮掺杂碳进行原位拉曼光谱测试,结果显示钠离子在氮掺杂的碳壳中的脱嵌行为具有较大程度的可逆性,研究结果对钠离子电池充放电过程的后续电化学研究提供了有价值的信息.     

Oxygen-Vacancy-Abundant Ferrites on N-Doped Carbon Nanosheets as High-Performance Li-Ion Battery Anodes

Transition metal oxides, as one of the most promising anode materials for lithium-ion batteries, often suffer from poor electronic conductivity and serious structural collapse. In this work, oxygen-vacancy-abundant CoFe₂O₄ and NiFe₂O₄ deposited on N-doped carbon nanosheets are designed and fabricated through a calcination procedure and a solvothermal strategy using Zn-hexamine coordination frameworks as precursors. The as-prepared NC@CoFe₂O₄ and NC@NiFe₂O₄ hybrids display improved cycle performances and rate capacities compared with CoFe₂O₄, NiFe₂O₄, and Fe₂O₃. The enhanced lithium storage performances of NC@CoFe₂O₄ and NC@NiFe₂O₄ are attributed to the oxygen vacancies and conductive N-doped carbon nanosheets, which increase the electronic conductivity and electrochemical reaction kinetics. The synthetic process in this work provides a new perspective for designing other high-performance transition metal oxide anodes.     

Metal–Organic Frameworks-Derived Mesoporous Si/SiOx@NC Nanospheres as a Long-Lifespan Anode Material for Lithium-Ion Batteries

Silicon (Si)-based anode materials with suitable engineered nanostructures generally have improved lithium storage capabilities, which provide great promise for the electrochemical performance in lithium-ion batteries (LIBs). Herein, a metal–organic framework (MOF)-derived unique core–shell Si/SiO_x@NC structure has been synthesized by a facile magnesio-thermic reduction, in which the Si and SiO_x matrix were encapsulated by nitrogen (N)-doped carbon. Importantly, the well-designed nanostructure has enough space to accommodate the volume change during the lithiation/delithiation process. The conductive porous N-doped carbon was optimized through direct carbonization and reduction of SiO₂ into Si/SiO_x simultaneously. Benefiting from the core–shell structure, the synthesized product exhibited enhanced electrochemical performance as an anode material in LIBs. Particularly, the Si/SiO_x@NC-650 anode showed the best reversible capacities up to 724 and 702 mAh g⁻¹ even after 100 cycles. The excellent cycling stability of Si/SiO_x@NC-650 may be attributed to the core–shell structure as well as the synergistic effect between the Si/SiO_x and MOF-derived N-doped carbon.     

Assembly of SnSe Nanoparticles Confined in Graphene for Enhanced Sodium‐Ion Storage Performance

Sodium‐ion batteries (SIBs) have attracted much interest as a low‐cost and environmentally benign energy storage system, but more attention is justifiably required to address the major technical issues relating to the anode materials to deliver high reversible capacity, superior rate capability, and stable cyclability. A SnSe/reduced graphene oxide (RGO) nanocomposite has been prepared by a facile ball‐milling method, and its structural, morphological, and electrochemical properties have been characterized and compared with those of the bare SnSe material. Although the redox behavior of SnSe remains nearly unchanged upon the incorporation of RGO, its electrochemical performance is significantly enhanced, as reflected by a high specific capacity of 590 mA h g^?1 at 0.050 A g^?1, a rate capability of 260 mA h g^?1 at 10 A g^?1, and long‐term stability over 120 cycles. This improvement may be attributed to the high electronic conductivity of RGO, which also serves as a matrix to buffer changes in volume and maintain the mechanical integrity of the electrode during (de)sodiation processes. In view of its excellent Na⁺ storage performance, this SnSe/RGO nanocomposite has potential as an anode material for SIBs.     

Improving Na+ transport kinetics and Na+ storage of hierarchical rhenium-nickel sulfide (ReS2@NiS2) hollow architecture by assembling layered 2D-3D heterostructures

Mixed metal sulfides have been widely used as anode material of sodium-ion batteries (SIBs) because of their excellent conductivity and sodium ion storage performance. Herein, ReS₂@NiS₂ heterostructures have been triumphantly designed and prepared through anchoring ReS₂ nanosheet arrays on the surface of NiS₂ hollow nanosphere. Specifically, the carbon nanospheres was used as hard template to synthesize NiS₂ hollow spheres as the substrate and then the ultrathin two-dimensional ReS₂ nanosheet arrays were uniformly grown on the surface of NiS₂. The internal hollow property provides sufficient space to relieve the volume expansion, and the outer two-dimensional nanosheet realizes the rapid electron transport and insertion/extraction of Na⁺. Owing to the great improvement of the transport kinetics of Na⁺, NiS₂@ReS₂ heterostructure electrode can achieve a high specific capacity of 400 mAh/g at the high current density of 1 A/g and still maintain a stable cycle stability even after 220 cycles. This hard template method not only paves a new way for the design and construct binary metal sulfide heterostructure electrode materials with outstanding electrochemical performance for Na⁺ batteries but also open up the potential applications of anode materials of SIBs.     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.     

Multiple Active Sites of Carbon for High‐Rate Surface‐Capacitive Sodium‐Ion Storage

Although sodium ion batteries (SIBs) possess many beneficial features, their rate performance, cycling stability, and safety need improvement for commercial applications. Based on the mechanisms of the sodium ions storage in carbon materials, herein we present a multiple active sites decorated amorphous carbon (MAC) with rich structural defects and heteroatom doping as an anode material for SIBs. The full utilization of fast bonding–debonding processes between the active sites and sodium ions could bring a capacitive strategy to achieve superior sodium storage properties. Consequently, after materials characterization and electrochemical evaluation, the as‐prepared electrode could deliver high rate and long‐life performance. This active‐site‐related design could be extended to other types of electrode materials, thereby contributing to future practical SIB applications.     

Bismuth Nanoparticles Embedded in Carbon Spheres as Anode Materials for Sodium/Lithium‐Ion Batteries

Sodium‐ion batteries (SIBs) are regarded as an attractive alternative to lithium‐ion batteries (LIBs) for large‐scale commercial applications, because of the abundant terrestrial reserves of sodium. Exporting suitable anode materials is the key to the development of SIBs and LIBs. In this contribution, we report on the fabrication of Bi@C microspheres using aerosol spray pyrolysis technique. When used as SIBs anode materials, the Bi@C microsphere delivered a high capacity of 123.5 mAh g^?1 after 100 cycles at 100 mA g^?1. The rate performance is also impressive (specific capacities of 299, 252, 192, 141, and 90 mAh g^?1 are obtained under current densities of 0.1, 0.2, 0.5, 1, and 2 A g^?1, respectively). Furthermore, the Bi@C microsphere also proved to be suitable LIB anode materials. The excellent electrochemical performance for both SIBs and LIBs can attributed to the Bi@C microsphere structure with Bi nanoparticles uniformly dispersed in carbon spheres.     

Antimony anchored in MoS2 nanosheets with N-doped carbon coating to boost potassium storage performance

Potassium ions batteries (PIBs) have been considered as promising energy storage systems owning to potassium rich natural abundances. However, the difficult reaction kinetics and poor cycling of electrode restrict the further development of PIBs. In this work, antimony anchored in MoS₂ nanosheets with N-doped carbon coating (Sb/MoS₂/NCs) are prepared and evaluated as anode for PIBs. In the unique Sb/MoS₂/NCs structure, the volume expansion of Sb particles could be effectively buffered by the around MoS₂ structure. The defects in MoS₂ nanosheets provide more electrochemical reaction sites for sufficient K⁺ insertion/extraction. Furthermore, the N-doped carbon can further accommodate the volume expansion and improve the electronic conductivity of Sb/MoS₂/NCs composites. Due to the above advantages, the Sb/MoS₂/NCs anode delivers a capacity of 235 mAh/g at 50 mA/g after 78 cycles. This work provides a prospective strategy to design advanced anode materials for PIBs using MoS₂ and antimony composites.     

具有类混凝土结构的 SiOx-C锂离子电池复合材料的制备

采用一种简单的方法制备具有类钢筋混凝土结构的Si-O-C负极材料,其中碳纳米管(carbon nanotubes,CNTs)如同钢筋一般嵌入材料中以提供应力支撑,硅原子被原子级分散的碳和氧原子均匀包裹,最后通过化学气相沉积镀上最外层的碳层,进一步抑制材料的体积变化。基于此独特的结构设计制备的CNTs/SiO_x-C/C负极表现出优异的电化学性能,其在0.5 A·g^-1的电流密度下循环970圈后容量保留率为80%。     

具有类混凝土结构的SiOx-C锂离子电池复合材料的制备

采用一种简单的方法制备具有类钢筋混凝土结构的Si-O-C负极材料,其中碳纳米管（carbon nanotubes,CNTs）如同钢筋一般嵌入材料中以提供应力支撑,硅原子被原子级分散的碳和氧原子均匀包裹,最后通过化学气相沉积镀上最外层的碳层,进一步抑制材料的体积变化。基于此独特的结构设计制备的CNTs/SiO_x-C/C负极表现出优异的电化学性能,其在0.5 A·g^-1的电流密度下循环970圈后容量保留率为80%。     

Dramatically Enhanced Li-Ion Storage of ZnO@C Anodes through TiO2 Homogeneous Hybridization

Amorphous nanoparticles of ZnO and TiO₂ embedded in carbon nanocages (AZT⊂CNCs) were successfully synthesized through a simple annealing process of TiO₂-coated zeolitic imidazolate framework-8 (ZIF-8). In the current anode of AZT⊂CNCs, tiny ZnO and TiO₂ nanoparticles were uniformly distributed in the carbon matrix (carbon nanocages), which could effectively buffer the volume expansion of electroactive ZnO and provide excellent electric conductivity. After fully investigating the electrochemical performance of the AZT⊂CNCs samples obtained with different additive amounts of tetrabutyl orthotitanate (TBOT) for TiO₂ coating, it has been found that AZT-30 (0.1 g ZIF-8 with 30 mL TBOT) shows the best cycle stability (510 mA h g⁻¹ after 350 cycles at 200 mA g⁻¹) and a superior rate capability (610 mA h g⁻¹ after 3500 cycles at 2 A g⁻¹). The greatly enhanced Li-ion storage performance could be ascribed to the fact that the introduction of amorphous TiO₂ could activate the reversible lithiation/delithiation reaction of ZnO during the charge/discharge process.     

The Synthesis of Porous Na3V2(PO4)3 for Sodium-Ion Storage

Na₃V₂(PO₄)₃ (NVP) has been regarded as a potential cathode material for sodium-ion batteries (SIBs) due to its excellent structural stability and rapid Na⁺ conductivity. However, its electrochemical performances are restricted by the large bulk structure and poor electronic conductivity. The construction of porous NVP materials is a powerful method to improve the electrochemical properties. This concept aims to provide an overview of recent progress of porous NVP materials for SIBs. Herein, the synthetic strategies and formation mechanisms of porous NVP materials as well as the relationship between the porous structures and electrochemical performances of NVP materials are reviewed. Furthermore, the challenges and prospects for the preparation of porous NVP materials in this field are outlined.     

A Biodegradable Polydopamine‐Derived Electrode Material for High‐Capacity and Long‐Life Lithium‐Ion and Sodium‐Ion Batteries

Polydopamine (PDA), which is biodegradable and is derived from naturally occurring products, can be employed as an electrode material, wherein controllable partial oxidization plays a key role in balancing the proportion of redox‐active carbonyl groups and the structural stability and conductivity. Unexpectedly, the optimized PDA derivative endows lithium‐ion batteries (LIBs) or sodium‐ion batteries (SIBs) with superior electrochemical performances, including high capacities (1818 mAh g^?1 for LIBs and 500 mAh g^?1 for SIBs) and good stable cyclabilities (93 % capacity retention after 580 cycles for LIBs; 100 % capacity retention after 1024 cycles for SIBs), which are much better than those of their counterparts with conventional binders.     

镶嵌于NH2-MIL-125 (Ti)衍生氮掺多孔碳中的花状超细纳米TiO2作为高活性和稳定性的锂离子电池负极材料

由于具有高安全性和优异的循环稳定性,二氧化钛(TiO₂)作为负极材料被广泛地应用于锂离子电池领域。但是较差的导电性和离子传输速率限制了TiO₂的进一步应用和发展。鉴于此,我们以花状NH₂-MIL-125 (Ti)为前驱体和硬模板,成功合成出了具有花状结构的超细纳米TiO₂/多孔氮掺杂碳片(N-doped porous carbon)复合物(记为FL-TiO₂/NPC)。过程中所制备的纳米TiO₂-金属有机构架(Ti-MOF)展现出由二维褶皱多孔纳米片堆积、组装而成的花状结构。一方面,二维褶皱纳米片包含TiO₂纳米颗粒可以增大活性物质与电解液的接触面积;另一方面,氮掺杂多孔碳基体可以提高整体复合物的导电性和结构完整性。将所获得的FL-TiO₂/NPC作为负极组装成的锂半电池, 在0.5 A·g^-1、300圈后仍有384.2 mAh·g^-1以及在1 A·g^-1、500圈仍有279.1 mAh·g^-1的比容量。进一步性能测试表明,在2 A·g^-1、2000圈长循环测试后,其仍能保持256.5 mAh·g^-1的比容量和接近100%的库伦效率。该优异的电化学活性和稳定性主要起源于材料独特的花状结构。我们的合成策略为今后制备高储锂性能的金属氧化物/多孔氮掺杂碳负极提供了一种新的思路。