Kinetics of Sulfur Oxide, Sulfur Fluoride, and Sulfur Oxyfluoride Anions with Ozone

Rate constants and product branching ratios were measured for eleven sulfur oxide, sulfur fluoride, and sulfur oxyfluoride anions reacting with O₃. The SO^– ₂ ion reacts rapidly to form –O^– ₃, SO^– ₃, and e^–. The temperature dependence of the branching ratio shows more reactive detachment and less SO^– ₃ formation at higher temperature. SO^– ₃ reacts with O₃, forming SO^– ₄ at 1/3 to 1/4 of the collisional rate from 200 to 500 K, respectively. At 300 K, SF^– ₆ charge transfers to O₃ at 20% of the collisional rate. F₂SO^– ₂ reacts with O₃ at a few percent of the collision rate, forming both O^– ₃ and FSO^– ₃; The ion F₃SO^– reacts slowly with O₃ to form F₃SO^– ₂. The ions SO^– ₄, SF^– ₅, FSO^– ₂, FSO^– ₃, F₃SO^–, and F₅SO^– are unreactive with O₃. A trend is noted relating the ion reactivity with the coordination of the central sulfur atom, i.e., the number of S–F bonds plus two times the number of S=O bonds. Only ions with a sulfur coordination of 4 or 6 are reactive, although the reaction rate constants are generally small. The reactivity trends appear to be partially explained by spin conservation. These reactions are all sufficiently slow, so O₃ reactions should not play a major role in SF₆/O₂ discharges. All ions studied have been found to be unreactive with O₂.     

Study of SO2 adsorption on titanium dioxide by IR spectroscopy and thermal desorption

Conclusions At least two different forms of chemisorbed SO₂ have been identified on the surface of anatase. The weakly bound SO₂ (a low-temperature peak with T_max=405–445 K, H_ads =85.7 kJ/ mole) is characterized by IR bands at 1330 and 1141 cm^– and is stabilized on coordinatively-unsaturated titanium ions. The strongly bound SO₂ (high-temperature peak with T_max=550–615 K) has a band at 1070 cm^–1. The thermal stability of SO₂ chemisorbed on TiO₂ is lower than on -Al₂O₃.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 503–505, March, 1989.     

Negative ion formation in compounds relevant to SF6 decomposition in electrical discharges

Dissociative and nondissociative electron attachment in the electron impact energy range 0–14 eV are reported for SOF₂ SOF₄, SO₂F₂, SF₄, SO₂, and SiF₄ compounds which can be formed by electrical discharges in SF₆. The electron energy dependences of the mass-identified negative ions were determined in a time-of-flight mass spectrometer. The ions studied include F^– and SOF ₂ ^–* from SOF₂; SOF ₃ ^– and F^– from SOF₄; SO₂F ₂ ^–* , SO₂F^–, F ₂ ^– , and F^– from SO₂F₂; SF ₄ ^–* and F^– from SF₄; O^–, SO^–, and S^– from SO₂; and SiF ₃ ^– and F^– from SiF₄. Thermochemical data have been determined from the threshold energies of some of the fragment negative ions. Lifetimes of the anions SOF ₂ ^–* , SO₂F ₂ ^–* , and SF ₄ ^–* are also reported.     

Kinetics of diamminesilver(I)-catalysed oxidation of sulphur(IV) by dioxygen in ammonia buffers

The kinetics of the silver(I)-catalysed autoxidation of SO₃ ^2– into SO₄ ^2– in ammonia–ammonium nitrate buffer obeyed the rate law:R _obs=k₁ k₂ K[Ag^I]_T[SO₃ ^2-}][O₂] / ([NH₃]+K[SO₃ ^2-])(k₁+k₂[O₂])The values of k ₁, k ₂/k _–1 and K were found to be 1.2l mol^–1 s^–1, 5.3 × 10² l mol^–1 and 0.6 respectively at 30 °C. Two alternative free radical mechanisms have been proposed.     

Interaction of Langmuir–Blodgett Layers Bearing Amino Groups with Sulfur Dioxide

The adsorption of SO₂ on thin Langmuir–Blodgett layers of long-chain molecules containing tertiary amino groups is studied by the polarization method. The study was performed at room temperature using 10- to 25-nm-thick layers in the SO₂ concentration range of 100–3000 mg/m³. It is shown that the amount of the adsorbed sulfur dioxide is proportional to its concentration in the gas phase.     

Calorimetric study of phase transitions in the thiourea 1,1,2,2-tetrachloroethane clathrate compound

Heat capacities of the thiourea clathrate compound of 1,1,2,2-tetrachloroethane, {(NH₂)₂CS}₃(CHCl₂)₂, were measured at temperatures between 13 and 330 K. Two phase transitions were found. The enthalpy and entropy changes of the transition are 5940 J·mol^–1 and 28.1 JK^–1· mol^–1 for the one occurring at 224 K and 2756 J·mol^–1 and 11.3 JK^–1·mol^–1 for the other at 248 K. It is concluded from the transition entropy values that the guest molecules are orientionally disordered nearly to the same extent as in the neat liquid.Contribution No. 56 from the Microcalorimetry Research Center     

Acidity function scale for H2SO4 solutions in phenol-acetone solvents with low water content at 25°C

The indicator method was employed to measure the acidity function H ₀ ^S of H₂SO₄ solutions in solvents consisting of an equimolar mixture of phenol and acetone with 0.8% water (from 3.6·10^–4 to 2.6·10^–2 M H₂SO₄) and 2.5% water (from 4.3·10^–4 to 0.32 M H₂SO₄) and of phenol and acetone in a molar ratio of 1:1.5 with 0.67% water (from 1.63·10^–4 to 7.77·10^–2 M H₂SO₄) and 2.09% water (from 4.49·10^–4 to 0.35 M H₂SO₄) at 25°C. The indicators employed were 4- and 2-nitroaniline.Deceased.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Lenneftekhim Scientific-Commercial Association, St. Petersburg. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 72–78, January, 1992.     

Gas-phase reactions in plasmas of SF6 with O2: Reactions of F with SOF2 and SO2 and reactions of O with SOF2

The plasma chemistry of SF₆/O₂ mixtures is particularly complicated because of the large number of possible reactions. Over a wide range of conditions, products including SF₄, SOF₄, SOF₂, and SO₂F₂ can be formed but thre is considerable uncertainty about the major reactions which contribute to the formation of these species. In this work reactions of oxygen atoms with SOF₂ and fluorine atoms with SOF₂ and SO₂ have been studied in order to determine the principal sources of SO₂F₂ in these plasmas. Reactions were studied at 295 K in a gas flow reactor sampled by a mass spectrometer. No reaction could be detected between oxygen atoms and SOF₂, which for the conditions employed, means that the upper limit for the reaction rate coefficient is 1×10^–14 cm³ sec^–1. The reaction of fluorine atoms with SOF₂ was studied with the helium bath gas number density ranging from 3.1×10¹⁶ to 2.0×10¹⁷ cm^–3. Within this range the rate coefficient increased with increasing [He] from (4.1 to 10.8)×10^–14 cm³ sec^–1. SO₂ was found to react with fluorine atoms with a rate coefficient which appeared to be independent of the helium bath gas number density over the range given above. The possibility that this reaction occurred entirely on the walls of the reactor is discussed.     

Effect of metals on the catalytic activity of sulfated zirconia for light naphtha isomerization

We studied on the function of the metal in the sulfated zirconia(SO₄^2–/ZrO₂) catalyst for the isomerization reaction of light paraffins. The addition of Pt to the SO₄^2–/ZrO₂ carrier could keep the high catalytic activity. The improvement in this isomerization activity is because Pt promotes removal of the coke precursor deposited on the catalyst surface. Though this catalytic function was observed in other transition metals, such as Pd, Ru, Ni, Rh and W, Pt exhibited the highest effect among them. It was further found that the Pd/SO₄^2–/ZrO₂–Al₂O₃ catalyst possessed a catalytic function for desulfurization of sulfur-containing light naphtha in addition to the skeletal isomerization. The sulfur tolerance of catalyst depended on the method of adding Pd, and the catalyst prepared by impregnation of the SO₄^2–/ZrO₂–Al₂O₃ with an aqueous solution of Pd exhibited the highest sulfur tolerance.Further, we investigated the improvement in sulfur tolerance of the Pt/SO₄^2–/ZrO₂–Al₂O₃ catalyst by impregnation of Pd. The results of EPMA analysis indicated that this catalyst was a hybrid-type one (Pt/SO₄^2–/ZrO₂–Pd/Al₂O₃) in which Pt/SO₄^2–/ZrO₂ particles and Pd/Al₂O₃ particles adjoined closely. This hybrid catalyst possessed a very high sulfur tolerance to the raw light naphtha that was obtained from the atmospheric distillation apparatus, although this light naphtha contained much sulfur. We assume that such a high sulfur tolerance in the hybrid catalyst is brought about by the isomerization function of Pt/SO₄^2–/ZrO₂ particles and the hydrodesulfurization function of Pd/Al₂O₃ particles. Besides, since the hybrid catalyst also provides high catalytic activity in the isomerization of HDS light naphtha, we suggest that the Pd/Al₂O₃ particles supply atomic hydrogen to the Pt/SO₄^2–/ZrO₂ particles by homolytic dissociation of gaseous hydrogen and also enhance the sulfur tolerance of Pt/SO₄^2–/ZrO₂ particles. Finally, we also propose the most suitable location of Pd and Pt in the metal-supported SO₄^2–/ZrO₂–Al₂O₃ catalyst.     

Hydrate numbers of scandium sulfate as deduced from solubility data

A simple method for determination of the hydrate numbers of saturating multi-hydrate salts in developed. The method demonstrated for scandium sulfate is based upon estimation of the enthalpy of solution of the hydrates from the solubility smoothing equations. It is shown that in the Sc₂(SO₄)₃–H₂O system, contrary to common opinion, the equilibrium solid phases are: Sc₂(SO₄)₃.6H₂O at 273–295 K, Sc₂(SO₄)₃.5H₂O at 295–333 K and Sc₂(SO₄)₃.4H₂O at 333–373 K. The solubility smoothing equations for the hexa-, penta- and tetrahydrate of scandium sulfate are given.     

Mechanism of the Effect of Thermal Treatment on the Formation of Strong Acid Sites in the Surface Layers of Sulfated Metal Oxides

Strong acid catalysts were synthesized by the impregnation of hydrated ZrO₂ and TiO₂ with sulfuric acid followed by thermal treatment at different temperatures. The surface acidity and crystallochemical characteristics of the catalysts were studied by potentiometry and X-ray diffraction analysis, respectively. It was found that the surface acidity gradually increased as the temperature of thermal treatment was increased from 350 to 600°C for SO^2– ₄/ZrO₂ or to 200°C for SO^2– ₄/TiO₂; this increase correlated with the degrees of crystallinity of the samples. A hypothesis was proposed to explain the gradual accumulation of acid sites in the surface layer in the course of thermal treatment. It was assumed that, because of crystallographic changes that caused the weakening or even rupture of Zr–O–S and Ti–O–S bonds in modified surface layers, these layers exhibited an enhanced reactivity in contact with water vapor. Subsequently, this resulted in the formation of strongly acidic grafted M–O–SO₃–H⁺ groups.     

Gas-phase reactions in plasmas of SF6 with O2 in He

Processes which occur in microwave discharges of dilute mixtures of SF₆ and O₂ in He have been examined using a flow reactor sampled by a mass spectrometer. Two classes of experiments were performed. In the first set of experiments, mixtures containing 6×10¹¹ cm^–3 SF₆, 6×10¹⁶ cm^–3 He, and O₂ in the range (0–3.6)×10¹³ cm^–3 were passed through a 20-W 2450-MHz microwave discharge. The gas mixtures arriving at a sample point downstream from the discharge were examined for SF₆, SF₄, SOF₂, SOF₄, SO₂F₂, SO₂, F, and O. In the second class of experiments, rate coefficients were measured for the reactions of SF₄ with O and O₂ and for the reaction of SF with O. The rate coefficient for the reaction of SF with O was found to be (4.2±1.5)×10^–11 cm^–3 s^–1. SF₄ was found to react so slowly with both oxygen atoms and oxygen molecules that only upper limits could be placed on the rate coefficients for these reactions. These values were 2×10^–14 cm³ s^–1 and 5×10^–15 cm³ s^–1 for reactions with O and O₂ respectively. The observed distribution of products from the discharged mixtures is discussed in terms of the measured rate coefficients.     

Titration von Sulfid mit einer sulfidionensensitiven Elektrode

Zusammenfassung Eine Methode zur potentiometrischen Titration von Sulfid mit Natriumplumbat(II)lösung an einer sulfidsensitiven Membranelektrode wird beschrieben. Sie eignet sich zur Bestimmung von 10^–4% Sulfid in Gegenwart von Cl^–, Br^–, J^–, SCN^–, SO₃ ^2–, S₂O₃ ^2–

---

Titration of sulphide with a sulphide-ion sensitive electrode

A method is described for the titration of sulphide with sodium plumbate(II) solution using a sulphide-sensitive electrode. The method is suitable for the determination of 10^–4% of sulphide in the presence of Cl^–, Br^–, J^–, SCN^–, SO₃ ^2–, S₂O₃ ^2–.

---

---

Wir danken Herrn Dr. K. Obst für wertvolle Hinweise und Diskussionen.     

Heat capacity and transition phenomena of structure I and II trimethylene oxide clathrate hydrates

Heat capacities of structure I and II trimethylene oxide (TMO) clathrate hydrates doped with small amount of potassium hydroxide (x=1.8×10^–4 to water) were measured by an adiabatic calorimeter in the temperature range 11–300 K. In the str. I hydrate (TMO·7.67H₂O), a glass transition and a higher order phase transition were observed at 60 K and 107.9 K, respectively. The glass transition was considered to be due to the freezing of the reorientation of the host water molecules, which occurred around 85 K in the pure sample and was lowered owing to the acceleration effect of KOH. The relaxation time of the water reorientation and its distribution were estimated and compared with those of other clathrate hydrates. The phase transition was due to the orientational ordering of the guest TMO molecules accommodated in the cages formed by water molecules. The transition was of the higher order and the transition entropy was 1.88 J·K^–1(TMO-mol)^–1, which indicated that at least 75% of orientational disorder was remaining in the low temperature phase. In the str. II hydrates (TMO·17H₂O), only one first-order phase transition appeared at 34.5 K. This transition was considered to be related to the orientational ordering of the water molecules as in the case of the KOH-doped acetone and tetrahydrofuran (THF) hydrates. The transition entropy was 2.36 JK^–1(H₂O-mol)^–1, which is similar to those observed in the acetone and THF hydrates. The relations of the transition temperature and entropy to the guest properties (size and dipole moment) were discussed.Contribution No 57 from the Microcalorimetry Research CenterThe authors would like to express their sincere thanks to the Nissan Science Foundation for their financial support.     

Infrarot-Spektren und Normalkoordinatenanalyse von Salzen mit den AnionenX 3CSO 3 − (X=H,D, F,Cl)

Zusammenfassung Die IR-Spektren verschiedener Salze mit den Anionen CH₃SO₃ ^–, CD₃SO₃ ^–, CF₃SO₃ ^– und CCl₃SO₃ ^– sowie ein Raman-Skektrum des Ag[CF₃SO₃] werden mitgeteilt. Für die gen. Anionen sowie CH₃PO₃ ^2– und CD₃PO₃ ^2– wird mit einem für alle Ionen ähnlichen allgemeinen Valenzkraftfeld eine Normalkoordinatenanalyse durchgeführt. An den A₁-Schwingungen von CF₃SO₃ ^– und CCl₃SO₃ ^– sind mehrere Koordinaten beteiligt; eine charakterisische CS-Valenzschwingung tritt in diesen Ionen nicht auf.

---

Infrared spectra and normal coordinate analysis of compounds with the anionsX ₃CSO₃ ^– (X=H, D, F, Cl)

The infrared spectra of several salts with the anions CH₃SO₃ ^– CD₃SO₃ ^–, CF₃SO₃ ^–, and CCl₃SO₃ ^– and Raman data for Ag[CF₃SO₃] are reported. A normal coordinate analysis using a GVFF is performed for these anions as well as for CH₃PO₃ ^2– and CD₃PO₃ ^2–. The A₁ modes of CF₃SO₃ ^– and CCl₃SO₃ ^– are mixed; consequently no characteristic CS stretching vibration occurs.

---

---

Mit 3 Abbildungen     

By-product formation in spark breakdown of SF6/O2 mixtures

The yields of SOF₄, SO₂F₂, SOF₂, and SO₂ have been measured as a function of O₂ content in SF₆/O₂ mixtures, following spark discharges. All experiments were made at a spark energy of 8.7 J/spark, a total pressure of 133 kPa, and for O₂ additions of 0, 1, 2, 5, 10, and 20% to SF₆. Even for the case of no added O₂, trace amounts of O₂ and H₂O result in the formation of the above by-products. However, addition of O₂ significantly increases the yields of SOF₄ and SO₂F₂, while SOF₂ is only slightly affected. The net yields for SOF₄ and SO₂F₂ formation range from 0.18×10^–9 and 0.64×10^–10 mol·J^–1, respectively, at 1% O₂ content to 10.45×10^–9 and 7.15×10^–10 mol·J^–1, respectively, at 20% O₂ content. The mechanism for SOF₄ production appears to involve SF₄, an important initial product of SF₆, as a precursor. Comparison of the SOF₄ and SO₂F₂ yield from spark discharges (arc and corona) shows that the yields from other discharges (arc and corona) shows that the yields can vary by at least three orders of magnitude, depending on the type of discharge and on other discharge parameters.     

Kinetics of tetraamminecopper(II)-catalysed oxidation of sulphur(IV) by peroxodisulphate in ammonia buffer

The kinetics of tetraamminecopper(II)-catalysed oxidation of SO^2– ₃ to SO^2– ₄ in ammonia buffers and in a nitrogen atmosphere obeys the rate law: –d[S^IV]/dt = k ₂[Cu^II][SO₃ ^2–][NH₃]^–1. There is spectrophotometric evidence for the formation of the intermediate complex [Cu(NH₃)₃(SO₃)] in a pre-equilibrium.     

Isopiestic determination of the osmotic and activity coefficients of aqueous Lu2(SO4)3 at 25°C

Osmotic coefficients have been measured for aqueous Lu₂(SO₄)₃ solutions from 0.12402 to 0.89631 mol-kg^–1 at 25°C by use of the isopiestic method; these measurements extend into the supersaturated molality region. Since there was a lack of activity data for Lu₂(SO₄)₃ solutions at lower molalities, they were approximated by equating them to results for La₂(SO₄)₃ from freezing temperature depression measurements. The combined osmotic coefficients were then used to derive mean molal activity coefficients for Lu₂(SO₄)₃ solutions. The osmotic coefficients decrease to 0.307 as their minimum value and the mean molal activity coefficients decrease to 0.0069. When these activities were combined with our previously reported solubility of 0.6260±0.0017 mol-kg^–1 for Lu₂(SO₄)₃·8H₂O, a thermodynamic solubility product of 2.3×10^–10 was obtained. This value yields the Gibbs energy of formation G _f ^° (Lu₂(SO₄)₃·8H₂O, cr)=–5518.9±16.4 kJ-mol^–1.     

Specific heat and phase transition of (Li1−xKx)2SO4 single crystals

A specific heat study of (Li_1–xK_x)₂SO₄ — LKS — mixed crystals has been made in a wide concentration rangex covering the temperature range 300–800 K. The phase diagram was determined. It is shown that a variation of the Li⁺:K⁺ concentration changes the critical behaviour of the specific heat. The results are discussed in terms of scattering mechanisms of energy carriers.

---

Zusammenfassung Bei Temperaturen zwischen 300 und 800 K wurde für einen breiten Konzentrationsbereich für x die spezifische Wärme von (Li_1–xK_x)₂SO₄-Mischkristallen untersucht und das entsprechende Phasendiagramm erstellt. Es wurde gezeigt, daß eine Änderung des Verhältnisses Li⁺:K⁺ auch das kritische Verhalten der spezifischen Wärme verändert. Die Ergebnisse werden hinsichtlich von Sreuungsmechanismen der Energieträger diskutiert.

     

A theoretical study of the H2SO4+H2O → HSO4 −+H3O+ reaction at the surface of aqueous aerosols

The surface region of sulfate aerosols (supercooled aqueous concentrated sulfuric acid solutions) is the likely site of a number of important heterogeneous reactions in various locations in the atmosphere, but the surface region ionic composition is not known. As a first step in exploring this issue, the first acid ionization reaction for sulfuric acid, H₂SO₄ + H₂O HSO₄^– + H₃O⁺, is studied via electronic structure calculations at the Hartree–Fock level on an H₂SO₄ molecule embedded in the surface region of a cluster containing 33 water molecules. An initial H₂SO₄ configuration is selected which could produce H₃O⁺ readily available for heterogeneous reactions, but which involves reduced solvation and is consistent with no dangling OH bonds for H₂SO₄. It is found that at 0 K and with zero-point energy included, the proton transfer is endothermic by 3.4 kcal/mol. This result is discussed in the context of reactions on sulfate aerosol surfaces and, further, more complex calculations.Contribution to the Jacopo Tomasi Honorary Issue