Superacid alumina catalysts II

The acidity and catalytic activity of alumina doped with AlCl₃, CH₃AlCl₂, PCl₅, PCl₃, I₂, Cl₂ and H₂PO₃F were studied. Vapors of AlCl₃ and CH₃AlCl₂ induce superacid sites in alumina, whereas PCl₃ and PCl₅ produce less acidic systems, which nevertheless catalyze the skeletal isomerization of alkenes. The modification of Al₂O₃ with other specified compounds affects only slightly the acidity and catalytic activity of alumina.

---

AlCl₃, CH₃AlCl₂, PCl₅, PCl₃, I₂, Cl₂ H₃PO₃F. AlCl₃ CH₃AlCl₂ - . PCl₃ PCl₅ - , . Al₂O₃ - .

     

Impregnation of alumina with palladium tetrahalide anionic complexes

The difference in reactivity of PdCl ₄ ^2– and PdBr ₄ ^2– species versus the Al₂O₃ hydrous surface was explained according to the trans-effect theory. It has important consequences on Pd uptake rates and impregnation profiles.

---

PdCl ₄ ^2– PdBr ₄ ^2– Al₂O₃ . Pd .

     

Some effective solvents for rapid and reliable characterization of phenylthiohydantoin-amino acids

Summary One-dimensional chromatography with internal standards permits reliable identification of the phenylthiohydantoins from all the common amino acids with the following TLC systems: silica gel — chloroform/n-butyl acetate (9010), di-isopropylether/ethanol (955), dichloromethane/ethanol/acetic acid (9082) ortrans-dichloroethylene/ethanol/acetic acid (88102); and cellulose with 25% formic acid — heptane/isobutanol/75% fromic acid (40309) or silica gel — chloroform/ ethanol/acetic acid/water (50470.52.5).Abbreviations: PTH=phenylthiohydantoin, TLC=thin-layer chromatography, HPTLC=high-performance TLC; other abbreviations: see end of text. Proportions in solvent mixtures are v/v except where otherwise indicated.     

Application of emissionless infrared diffuse reflectance spectrometry for following reactions of adsorbed alcohols on an alumina catalyst

IR spectra of adsorbed alcohols on alumina were measured under the reaction conditions at elevated temperatures. The transient response of IR absorption intensity indicates that alkoxides are reactive adsorbed species but carboxylates are not. The rate constants of surface reactions were calculated from the transient response.

---

, . , , , —, .

     

Depolymerization kinetics of the polymer formed in the reaction of 1-bromobutane on unmodified alumina

The slow processes accompanying the reaction of 1-bromobutane on unmodified alumina have been studied. Butenes and octane are formed via depolymerization of a low polymeric complex formed from the reaction product. The activation energy for the formation of products from the polymer has been determined.

---

, 1- . , , , , . .

     

Highly active alumina for aldol condensation of acetone

Eleven kinds of aluminas were prepared from various starting materials by different methods. An alumina prepared from sodium aluminate by precipitation with carbon dioxide was found to exhibit an extraordinarily high catalytic activity for aldol condensation of acetone at 0 °C.

---

. , , 0°C.

     

Toluene disproportionation and coke formation over fluorided alumina and hydrogen-mordenite

Toluene transformation was investigated on a fluorided alumina and a protonic mordenite under hydrogen (0.8, 12 bar) and under nitrogen (12 bar). Hydrogen pressure considerably improves the catalytic stability of H-mordenite by inhibiting the formation of coke. Moreover, hydrogen eliminates part of the coke deposited by reaction under nitrogen, and regenerates the activity of the mordenite. On the contrary, hydrogen has no effect in the case of fluorided alumina. The particular behavior of the mordenite is attributed to its very strong acidity.

---

(0,8, 12 ) (12 ). -, . , , , . , - . .

     

Phthalocyaninartige Bor-Komplexe

Zusammenfassung Aus Halogenboranen und Organohalogenboranen (RBX ₂R=C₆H₅, Cl, Br;X=F, Cl, Br) sowie aus Organoboranen oder Thioboranen entstehen mit Phthalodinitril Triisoindolo-[1,2,3-cd1,2,3-gh1,2,3-kl][2,3a,5,6a,8,9a,9b]-hexaazaboraphenalene von denen die B–Cl- und B–F-Verbindungen näher charakterisiert werden.Dekaboran(14), Diboran(6) oder Boranaddukte von Stickstoffbasen liefern hingegen mit Phthalodinitril metallfreies Phthalocyanin.

---

Triisoindolo[1,2,3-cd1,2,3-gh1,2,3-kl][2,3a,5,6a,8,9a,9b]-hexa-azaboraphenalene

Triisoindolo[1,2,3-cd1,2,3-gh1,2,3-kl][2,3a,5,6a,8, 9a,9b]-hexaazaboraphenalenes are obtained from the reactions of haloboranes and organohaloboranes (RBX ₂R=C₆H₅, Cl, Br;X=F, Cl, Br) as well as from organoboranes or thioboranes with phthalodinitrile. The B–Cl and B–F compound have been characterized by analyses, i.r.-, u.v.- and mass-spectrometry.Diborane(6), dekaborane(14) and amine-boranes, however, upon reaction with phthalodinitrile lead to high yields of metal free phthalocyanine.

---

---

Herrn Prof. Dr.M. Pailer zum 60. Geburtstag gewidmet.     

Temperature programmed reduction study of alumina supported Fe3+ catalysts

The influence of the calcination temperature and Fe³⁺ content on the solubility of iron(III) in the alumina lattice has been investigated, using temperature programmed reduction (T.P.R.). It was found that the main quantity of Fe³⁺ species is dissolved in the region 200–320 °C. The solubility of the Fe³⁺ was almost constant in the range of 320–665 °C. This is found to be the case irrespective of the Fe³⁺ content at 665 °C. The surface Fe³⁺ species generally differs from the bulk -Fe₂O₃.

---

Fe³⁺ (III) - . , Fe³⁺ 200–320 °C. Fe³⁺ 320–665 °C. , 665 °C Fe³⁺. Fe³⁺ -Fe₂O₃.

     

Phenothiazine cation radical formation on silica, silica-alumina and alumina

The solution of phenothiazine in benzene produces phenothiazine cation radicals on the surface of silica, alumina and silica-alumina catalysts.

---

- SiO₂, Al₂O₃ .

     

Kinetics and mechanism of oxidation of quinol by alkaline hexacyanoferrate(III)

The reaction between quinol and alkaline hexacyanoferrate(III) at constant ionic strength gives p-benzoquinone. The rate of the reaction was first order in the concentrations of substrate, oxidant and alkali. The slow step of the reaction involves the formation of the p-benzosemiquinone radical, which was detected by esr spectroscopy as a five-line spectrum with peak intensity ratios of 14641.

---

(III) -. , . - , , 14641.

     

Kinetics of triphenylphosphite ozonide consumption in reaction with triphenylphosphite

Kinetic regularities of triphenylphosphite ozonide reaction with triphenylphosphite have been studied at T=–75°C to –40°C. The rate of ozonide consumption is estimated as W=k₁[(C₆H₅O)₃P·O₃]+k₂[(C₆H₅O)₃P·O₃][(C₆H₅O)₃P], where k₁=(2.03±0.39)×10^–5s^–1(–50°C), 1gk₂=(3.82±0.33)–(6.61±0.32)/gq dm³/mol s and =2.303RT kcal/mol.

---

–75°C –40°C . : W=k₁[(C₆H₅O)₃P·O₃]+k₂[(C₆H₅O)₃P·O₃][(C₆H₅O)₃P], k₁=(2,03±0,39)·10^–5–1(–50°C); 1g k₂=(3,82±0,33)–(6,61±0,32)/ /·, =2,303·RT /

     

An IR study of the Ziegler system Co(acad)3/Mg(n-butyl)2 in THF

Applying IR spectroscopy for studying the Ziegler system Co(acac)₃/Mg(Bu)₂ (Bu=n-butyl) in tetrahydrofuran, it could be shown that the following reactions take place: reduction of cobalt (III), exchange of the acetylacetonate groups and their interaction with Mg(Bu)₂.

---

Co(acac)₃/Mg(Bu)₂ (Bu=-) - , (III), Mg(Bu)₂.

     

Komplexbildung im System Ni2+—o-Methylbenzamidoxim

Zusammenfassung Die Komplexe des Ni²⁺ mit o-Methylbenzamidoxim wurden in neutraler und in alkalischer Lösung spektrophotometrisch untersucht. Die Bildungskonstanten sindK ₁=40 für 11 undK ₂=1,7·10² für 12 in neutraler Lösung und ₁ = =(3,92 ±0,2) · 10⁴für 11 und lgK = lg ₁ + lg ₂ = 3,45 ± ±0,15 für 12 bei 25° und =1 in alkalischer Lösung.

---

Complex formation in the systemeNi ²⁺—o-methylbenzamide oxime

The complexes of Ni²⁺ with o-methylbenzamide oxime were investigated spectrophotometrically in neutral as well as in alkaline solution. The formation constants areK ₁=40 for 11 andK ₂=1.7·10² for 12 in the neutral solution and ₁ = =(3.92 ±0.2) · 10⁴ for 11 and lgK = lg ₁ + lg ₂ = 3.45 ± ±0.15 for 12 at 25° and =1 for the alkaline solution. *** DIRECT SUPPORT *** A3615139 00007

     

Dehydration of lithium triphosphate pentahydrate,Li5P3O10· 5H2O

The kinetics of isothermal-isobaric dehydration of Li₅P₃O₁₀·5H₂O in vacuum (p=10^–1 hPa) and in water vapour atmosphere ( =23·hPa) was investigated by TG in the temperature range 40–140°. It was shown that the initial non-degradation removal of 1/10 of the crystal water, the rate of which is sensitive to , proceeds according to the laws of reversible topochemical reactions. In the next, irreversible degradation stage, where the bulk of the crystal water is removed, the kinetic characteristics of the process and the DSC effects exhibit a low sensitivity to the water vapour pressure. The peculiarities of Li₅P₃O₁₀·5H₂O dehydration were considered in comparison with the thermal behaviour of Na₅P₃O₁₀·6H₂O and K₅P₃O₁₀·4H₂O.

---

Zusammenfassung Die Kinetik der isotherm-isobaren Dehydratisierung von Li₅P₃O₁₀·5H₂O in Vakuum (p=10^–4 hPa) und in Wasserdampfatmosphäre ( =23 hPa) wurde durch TG im Temperaturbereich von 40–140° untersucht. Es wurde gezeigt, daß die anfängliche, noch keine Zersetzung zur Folge habende Eliminierung von 1/10 des Kristallwassers, deren Geschwindigkeit von abhängt, nach den Gesetzen der reversiblen topochemischen Reaktionen abläuft. Im nächsten irreversiblen Zersetzungsschritt, in dem die Hauptmenge des Kristallwassers austritt, sind die kinetischen Kennwerte des Prozesses und die DSC-Effekte nur wenig vom Wasserdampfdruck abhängig. Die Besonderheiten der Dehydratisierung von Li₅P₃O₁₀·5H₂O werden im Vergleich mit dem thermischen Verhalten von Na₅P₃O₁₀·6H₂O und K₅P₃O₁₀·4H₂O erörtert.

---

40–140° - Li₅P₃O₁₀ · 5₂ (=10^–4 ) (=23 ). , 1/10 , . , - . L₅₃₁₀·5₂ Na₅P₃O₁₀·6H₂O K₅₃₁₀·4₂.

     

Peculiarities in oxidative conversion of methane to C2 hydrocarbons over CaO?CaCl2 catalysts

Experimental data for the oxidative dimerization of methane over CaO–CaCl₂ systems indicate that C₂ hydrocarbons are formed with the participation of chlorine generated by the catalyst surface under the effect of a reaction medium. A heterogeneous-homogeneous scheme for this process is suggested.

---

CaO–CaCl₂ , C₂- , . - .

     

Effect of α-methylstyrene of the curing behaviour of vinyl ester resins

The curing behaviour of bismethacryloxy derivative of diglycidyl ether of bisphenol A (vinyl ester resin) containing styrene as the reactive diluent (40% w/w) was studied using gel point determination method and DSC. Seven samples of styrene/-methylstyrene in the ratio 400, 355, 3010, 2515, 2020, 1525 and 040 were studied. Delayed curing was observed in samples containing increasing proportions of -methylstyrene. The energy of activation decreased from 869 kJ mol^–1 to 333 kJ mol^–1 as the concentration of -methylstyrene increased in the formulations. However, no difference in thermal stability was observed by replacement of styrene by -methylstyrene. It was concluded that in vinyl ester resin samples 10–15% -methylstyrene and 30-25% styrene can be used as reactive diluent.

---

Zusammenfassung Mittels DSC und Bestimmung der Gelierungstemperatur wurde das Aushärteverhalften des Bismethakryloxyderivaten des Diglycidyläthers von Bisphenol A (Vinylesterharz) mit 40 Gewichtsprozenten Styrol als reaktives Streckmittel untersucht. Es würden sieben Proben mit einem Styrol/-Methylstyrol Verhältnis von 400, 355, 3010, 2515, 2020, 1525 und 040 untersucht. Mit steigendem Anteil an -Methylstyrol konnte eine Verzögerung der Aushärtung sowie ein Absinken der Aktivierungsenergie von 869 kJ · mol^–1 auf 333 kJ · mol^–1 beobachtet werden. Der Ersatz von Styrol durch -Methylstyrol veränderte jedoch die thermische Stabilität in keiner Weise. Vinylesterharzproben mit 10–15% -Methylstyrol und 30–25% Styrol können als reaktive Streckmittel in Vinylesterharzen verwendet werden.

---

- - , 40 .% . /-, 400, 355, 3010, 2515, 2020, 1525 040. - . - 869 333 · ^–1. , .. , , 10–15% - 30–25% .