Structural properties of hydroxyl-substituted alkyl benzenesulfonates at the water/vapor and water/decane interfaces

Molecular dynamics simulations have been performed to investigate the structural properties of hydroxyl-substituted alkyl benzenesulfonate monolayers formed at the water/vapor and water/decane interfaces.We report a detailed study of the interfacial properties—liquid density profile,hydrogen bond structure,surfactant aggregate structure and order parameter—of the novel anionic surfactant,sodium 2-hydroxy-3-decyl-5-octylbenzenesulfonate(C10C8OHphSO3Na).Simulation results show that:with increasing number of s...     

Photobiological properties of hydroxy-substituted flavothiones

Flavothione (FT) and a series of 18 hydroxy- and methoxy-substituted flavothiones were screened for photobiological activity. The 5-hydroxy-substituted compounds (group 3) and the methoxy-substituted flavothiones were inactive. FT and the remaining hydroxy-substituted compounds, all displayed photobiological activity. Among these, the 3-hydroxy-substituted compounds (group 2) were the most efficient photosensitizers overall in spite of their concurrent fast photodegradation. FT and all other hydroxyflavothiones, not substituted in the 3- or 5-positions (group 1), were inefficient compared with group 2. Detailed photobiological tests were carried out for four flavothiones of groups 1 and 2. The biological tests included fungi, several strains of Escherichia coli, Salmonella typhimurium and mammalian cells. In addition, the ability of these flavothiones to perform lipid peroxidation was evaluated. FT and 6-hydroxyflavothione (group 1) induce DNA damage via H-atom abstraction from the lowest n, pi* triplet state of the thione (oxygen independent). For 3-hydroxy and 3,6-dihydroxyflavothione (group 2), both DNA and the membrane are targets. The mechanism likely involves both energy transfer and electron transfer from the lowest pi, pi* triplet state to oxygen, to form singlet oxygen and the superoxide anion. Some of these compounds could be considered as models for environmentally safe photopesticides.     

A study of interfacial dilational properties of two different structure demulsifiers at oil-water interfaces

The interfacial dilational viscoelastic properties of two demulsifiers with straight chain (SP-169) and branched chain (AE-121) at the oil-water interfaces were investigated by means of the longitudinal waves method and the interfacial tension relaxation method, respectively. The results obtained by the longitudinal waves method showed that the dilational viscous component for AE-121 and SP-169 also passed through a maximum value with increasing concentration. It was found that the maximum value appeared at different demulsifier concentrations during our experiment frequency; and the higher is the dilational frequency, the lower is the concentration. The influences of AE-121 and SP-169 on the dilational viscoelastic properties of the oil-water interface containing surface-active fraction from Iranian crude oil have been measured. The results clearly stated that both demulsifiers could obviously decrease the dilational elasticity of oil-water interface containing surface-active fraction. At low concentration, because of stronger adsorption ability, SP-169 has stronger ability to decreasing the dilational modulus than AE-121. We also found that the dilational modulus of the interface contained surface-active fraction passed through a minimum value with increasing demulsifier concentration for both demulsifiers. This result indicated the dosage of demulsifier had an optimum value. The results obtained by means of interfacial tension relaxation method showed that the slow relaxation processes involve mainly rearrangement in the conformation of the molecules appeared with increasing demulsifier concentration.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Effect of alkyl chain length on the surface dilational rheological and foam properties of N-acyltaurate amphiphiles

The dynamic dilational properties of sodium 2-(2-(alkylaryloxy)-alkylamido)ethanesulfonates (12+nB-Ts) at the air–water interfaces were investigated by drop shape analysis, and their foam properties were also measured. The influences of time and bulk concentration on surface dilational properties were expounded. The results show that the molecular interaction controls the nature of adsorption film during lower concentration range, and the film behaves elastic in nature. During higher concentration range, the diffusion exchange process controls the dynamic dilational properties and the surface film shows remarkable viscoelasticity. An increase in hydrophobic chain length enhances the molecular interaction at low concentration and speeds up the diffusion exchange process at high concentration, which results in the different variations of modulus at different concentration regions. For 12+nB-Ts, too short a chain probably produces bad film elasticity, whereas too great a length produces too fast liquid drainage. Therefore the optimal length in the branched chain leads to the best foam stability.     

Interfacial dilational properties of tri-substituted alkyl benzene sulfonates at air/water and decane/water interfaces

The dilational rheological properties of absorbed film of three pairs of structural isomers, tri-substituted alkyl benzene sulfonates, at the air-water and decane-water interfaces have been investigated by drop shape analysis method. The influences of bulk concentration on dilational elasticity and viscosity were expounded. Interfacial tension relaxation method was employed to obtain dilational parameters in a reasonably broad frequency range. The experimental results showed that the meta-alkyl to sulfonate group plays a crucial role in the interfacial dilational properties: the longer meta-alkyl will lead to higher dilational parameters for air-water interface and lower ones for decane-water interface when the total alkyl carbon numbers are equal. For alkyl benzene sulfonates with shorter meta-alkyl, the surface dilational properties are similar to interfacial dilational properties, whereas the surface dilational parameters are obviously higher than the interfacial dilational parameters for alkyl benzene sulfonates with longer meta-alkyl in general. The possible mechanism has been proposed and ensured by Cole-Cole plots.     

Dynamics of interfacial layers-experimental feasibilities of adsorption kinetics and dilational rheology

Each experimental method has a certain range of application, and so do the instruments for measuring dynamic interfacial tension and dilational rheology. While the capillary pressure tensiometry provides data for the shortest adsorption times starting from milliseconds at liquid/gas and tens of milliseconds at liquid/liquid interfaces, the drop profile tensiometry allows measurements in a time window from seconds to many hours. Although both methods together cover a time range of about eight orders of magnitude (10(-3) s to 10(5) s), not all surfactants can be investigated with these techniques in the required concentration range. The same is true for studies of the dilational rheology. While drop profile tensiometry allows oscillations between 10(-3) Hz and 0.2 Hz, which can be complemented by measurements with capillary pressure oscillating drops and the capillary wave damping method (up to 10(3) Hz) these six orders of magnitude in frequency are often insufficient for a complete characterization of interfacial dilational relaxations of surfactant adsorption layers. The presented analysis provides a guide to select the most suitable experimental method for a given surfactant to be studied. The analysis is based on a diffusion controlled adsorption kinetics and a Langmuir adsorption model.     

Influence of alkyl chain length of alpha olefin sulfonates on surface and interfacial properties

Alpha olefin sulfonates (AOS) with various alkyl chain lengths have been used to investigate the influence of alkyl chain length on the interfacial properties at air–water, liquid paraffin–water, and parafilm–water interfaces. It was found that the critical micelle concentration decreased with increasing alkyl chain length, while the efficiency of reducing surface tension was inverse relationship with alkyl chain length. The diffusion coefficient obviously reduced with an increase of surfactant concentration and alkyl chain length. The C_14-16AOS shows better wettability and emulsification than C_16-18AOS and C_20-24AOS. For foaming properties, the foamability and foam stability dramatically decreased with increasing alkyl chain length.     

Influence of demulsifiers of different structures on interfacial dilational properties of an oil-water interface containing surface-active fractions from crude oil

The influences of two commercial demulsifiers that have a straight chain and branch chain, respectively, on the dilational viscoelasticity of an oil-water interfacial film containing surface-active fractions from crude oil were investigated. The branch-chain demulsifier AE-121 could efficiently substitute surface-active fractions of different average molecular weights from the oil-water interface, while straight-chain SP-169 could only efficiently substitute those of large average molecular weight. It was apt to form a mix-adsorption layer with surface-active fractions of small average molecular weight. The results showed that the molecular size (or represented by average molecular weights) of the surface-active fractions was an important factor influencing the reciprocity of demulsifiers and surface-active fractions at the oil-water interface. This effect could be well explained by the difference between sizes of surface-active fraction molecules and vacancies between demulsifier molecules at the interface. The results of SDBS also proved this explanation.     

Interfacial dilational rheological property and lamella stability of branched alkyl benzene sulfonates solutions

The dynamic dilational properties of branched alkyl benzene sulfonates at the air–water and decane–water interfaces were investigated by drop shape analysis, and their lamella stability was measured. The influences of time, dilational frequency, and bulk concentration on surface dilational elasticity and dilational viscosity were expounded. The results show that the molecular interaction controls the nature of adsorption film during lower concentration range and the film behaves elastic in nature. During higher concentration range, the diffusion-exchange process controls the dynamic dilational properties and the surface film shows remarkable viscoelasticity. An increase in hydrophobic chain length enhances the molecular interaction, which results in the increase of dilational parameters and lamella stability. The data correlation suggests that the ability to form a stable lamella is linked to the intrinsic surface dilational elasticity.     

Interpretation of surface dilational elasticity data based on an intrinsic two-dimensional interfacial compressibility model

The present analysis shows that the introduction of intrinsic two-dimensional compressibility of a surfactant adsorption layer allows a much better interpretation of experimental data on the limiting (high-frequency) elasticity and characteristic frequency of diffusional relaxation than models using Frumkin's or other adsorption isotherms. The proposed model describes experimental data on surface dilational elasticity, as well as on surface pressure, sufficiently well at low and high surfactant concentrations, assuming the Lucassen and van den Tempel model of surface dilational elasticity is realized.     

Antimycobacterial activity of salicylanilide benzenesulfonates

A series of eighteen novel esters of salicylanilides with benzenesulfonic acid were designed, synthesized and characterized by IR, 1H-NMR and 13C-NMR. They were evaluated in vitro as potential antimycobacterial agents towards Mycobacterium tuberculosis, Mycobacterium avium and two strains of Mycobacterium kansasii. In general, the minimum inhibitory concentrations range from 1 to 500 μmol/L. The most active compound against M. tuberculosis was 4-chloro-2-(4-(trifluoromethyl)phenylcarbamoyl)-phenyl benzenesulfonate, with MIC of 1 μmol/L and towards M. kansasii its isomer 5-chloro-2-(4-(trifluoromethyl)phenylcarbamoyl)phenyl benzenesulfonate (MIC of 2-4 μmol/L). M. avium was the less susceptible strain. However, generally, salicylanilide benzenesulfonates did not surpass the activity of other salicylanilide esters with carboxylic acids.     

A study of dilational rheological properties of polymers at interfaces

Viscoelastic properties of two polymers, partially hydrolyzed polyacrylamide and partially hydrolyzed modified polyacrylamide, widely used in chemical flooding in the petroleum industry, were investigated at three interfaces, water-air, water-dodecane, and water-crude oil, by means of a dilational method provided by I.T. Concept, France, at 85 degrees C. Polymer solutions were prepared in brine with 10,000 mg/l sodium chloride and 2000 mg/l calcium chloride. It has been shown that the viscoelastic modulus increases with the increment of polymer concentration in the range of 0-1500 mg/l at the water-air interface. Each polymer shows different viscoelatic behavior at different interfaces. Generally speaking, values of the viscoelastic modulus (E), the real part (E'), and the imaginary part (E") at the crude oil-water interface for each polymer are lower than at the air-water or water-dodecane interface. The two polymers display different interfacial properties at the same interface. Polymer No. 2 gives more viscous interfaces than polymer No. 1. All the information obtained from this paper will be helpful in understanding the interfacial rheology of ultra-high-molecular-weight polymer solutions.     

Stereoselective synthesis of hydroxy-substituted tetrahydrofurans

Iodocyclizations of 4-alkene-1,3-diol derivatives proceed with high stereocontrol to provide cis 2-iodomethyl-3-hydroxy(alkoxy)tetrahydrofurans. The effect of alkoxy substituents on the diastereoselectivity has also been assessed.     

Regioselective ortho-formylation of hydroxy-substituted spironaphthooxazine

Formylation of photochromic 9′-hydroxy-1,3,3-trimethyl-1,3-dihydrospiro[2H-indole-2,3′-3′H-naphtho[2,1-b][1,4]oxazine] with the paraformaldehyde-MgCl₂-Et₃N system or by the Reimer-Tiemann reaction proceeds at the ortho-position to the hydroxy group to form 10′-formyl derivative.     

Interfacial dilational properties of anionic gemini surfactants with polymethylene spacers

The dilational properties of anionic gemini surfactants alkanediyl-α,ω-bis(m-octylphenoxy sulfonate) (C₈C_mC₈) with polymethylene spacers at the water–air and water–decane interfaces were investigated by oscillating barriers and interfacial tension relaxation methods. The influences of oscillating frequency and bulk concentration on the dilational properties were explored. The experimental results show that the linking spacer plays an important role in the interfacial dilational properties. The moduli pass through one maximum for all three gemini surfactants at both water–air and water–decane interfaces. However, the values of moduli at the water–air interface are obviously higher than those at the water–decane interface because the sublayer formed by spacer chains will be destroyed by the insertion of oil molecules. Moreover, with the increase of spacer length, the surface adsorption film becomes more viscous at high concentration, which can be attributed to the process involving the formation of the sublayer. On the other hand, the spacers of the adsorbed C₈C₆C₈ molecules will extend into the oil phase when the interface is compressed. As a result, the interfacial film becomes more elastic with the increase of spacer length at high concentration. The experimental results obtained by the interfacial tension relaxation measurements are in accord with those obtained by the oscillating barriers method.     

Tetraanthraquinonoporphyrazines: III. Synthesis and physicochemical properties of metal complexes of hydroxy-substituted tetraanthraquinonoporphyrazines

Methods have been developed for the synthesis of metal complexes of hydroxy-substituted tetraanthraquinonoporphyrazines. The yield of the target products has been improved via complexation with the corresponding methoxy derivatives and subsequent hydrolysis of the methoxy groups. Some physicochemical properties of substituted 9,10-dioxo-9,10-dihydroanthracene-2,3-dicarboxylic acids and tetraanthraporphyrazine metal complexes derived therefrom have been studied.