Effect of TiO2 addition on the crystallization of quenched glasses in the SiO2–Al2O3–ZrO2 system

The glass formation in the SiO₂-rich region of the ternary oxide system Al₂O₃–ZrO₂–SiO₂ with MgO, CaO, and TiO₂ as melting aids was analyzed. The crystallization of glasses with different content of TiO₂ and phase evolution with the temperature was studied by X-ray diffraction, infrared, laser Raman spectroscopy and transmission electron microscopy. The use of TiO₂ favored formation and crystallization of the glasses due to the decrease of the viscosity of melts and acting as a nucleating agent. The crystalline phase of t-ZrO₂ was developed at temperatures as low as 880°C whereas in as prepared specimens without TiO₂ its presence was not detected. For the specimens with TiO₂, t-ZrO₂ and mullite were the principal phases at 1000°C. TiO₂ addition did not change the crystallization sequence but decreased the formation temperature of the crystalline phases. Most of Ti⁴⁺ ions entered into t-ZrO₂ and only a small portion in mullite, but the surplus was detected in ZrTiO₄.     

Enhancement of ionic conductivity in the composite solid electrolyte system: TlI–Al2O3

This paper reports the heterogeneously doped alumina (Al₂O₃) on the ionic conductivity of thallium iodide. Composite materials of formula (1 − x) TlI–xAl₂O₃, x = 0–0.7 have been prepared and studied by X-ray diffraction, differential scanning calorimetry, and electrical conductivity. X-ray diffraction and differential scanning calorimetry proved the formation of composite in this binary system. The maximum enhancement observed is about three orders of magnitude with respect to the host material. The enhancement of electrical conductivity in comparison with pure thallium iodide can be interpreted with the space charge layer model. Moreover, the increased content of alumina in the system leads to the disappearance of phase transition β–α thallium iodide, which is usually observed in the pure compound. This behavior was explained by stabilizing effect of β-phase at high temperatures and suppression of α-phase at higher contents of alumina.     

Optical properties of glasses in the Li2O–MoO3–P2O5 system

Glasses xLi₂O–(50-x)(MoO₃)₂–50P₂O₅ with x = 10, 20, 30, and 40 mol% were prepared and their optical and electrical properties were investigated. Analysis of the IR spectra revealed that the Li⁺ ions act as a glass modifier that enter the glass network by breaking up other linkages and creating non-bridging oxygens in the network. The optical absorption edge of the glasses was measured for specimens in the form of thin blown films and the optical absorption spectra of those were recorded in the range 200–800 nm. From the optical absorption edges studies, the optical band gap (E _opt) and the Urbach energy (E _e) values have been evaluated by following the available semi-empirical theories. The linear variation of (αhν)^1/2 with hν, is taken as evidence of indirect interband transitions. The E _opt values were found to decrease with increasing Li₂O content by causing increase in the number of non-bridging oxygens in network. The Urbach tail analysis gives the width of localized states between 0.48 and 0.74 eV.     

Infrared photoluminescence and Raman spectra in the Y2O3–ZrO2 system

In this work we present laser-excited infrared photoluminescence and Raman spectra of zirconia with different yttria content (2%–9.5% Y ₂O₃) in order to investigate the effect of dopant on their optical properties. All the Raman spectra were taken over the range 100–800 cm^?1, and the Ar⁺ laser-excited luminescence over the range 16,000–19,000 cm^?1 (absolute frequency). The results are discussed on the basis of defects related to anion vacancies and changes in the disorder degree induced mainly by yttria content in the samples.     

On the homogeneity range of β″-alumina in the Na2OMgOAl2O3 system

The Al₂O₃ rich region of the Na₂O:MgOAl₂O₃ system has been investigated by means of X-ray phase analytical methods. The main features of the isothermal sections at 1870 K and 1950 K have been determined. The two sections exhibit the same phase equilibria except in the Na₂Al₂O₄-β″ region where a liquids phase appears at 1950 K. The magnesium stabilized β″-alumina phase with the nominal formula Na_1xxAl₁₁−xO₁₇ exhibits an extended homogeneity range with the magnesium content ranging over x=0.59-0.72. The homogeneity ranges are accompanied by variations in the unit cell dimentions. The composition of β″-alumina appears to correspond to a far lower relative sodium cntent than that indicated by the ideal formula at large magnesium + aluminium contents.     

Two triple points in the H2O–H2 system

Using a volumetric technique, phase transitions in the H₂O–H₂ system were investigated in the vicinity of two points of an invariant equilibrium, L+I _h+sII and L+sII+C ₁, located at 1.07 kbar and?10 °C and at 3.6 kbar and 1 °C, respectively. Liquid water (L), low-pressure hexagonal ice (I _h) and high-pressure cubic (sII) and rhombohedral (C ₁) clathrate hydrates were in equilibrium with gaseous hydrogen taken in excess.     

Decagonal quasicrystal in the Al–Pd–Mn system

Abstract

A stable decagonal quasicrystal in Al₇₀Pd_30?xMn_x alloys (x = 10–20) was examined by electron diffraction and high-resolution electron microscopy. The decagonal quasicrystalline grains are formed with definite crystallographic relationships to adjacent icosahedral and Al₃Mn crystalline grains. The structure of the decagonal phase, which is formed as the main phase at near Al₇₀Pd₁₀Mn₂₀ composition, is a mixture of decagonal quasicrystalline regions with some linear phason strain and microcrystalline regions. The structures of both regions may be interpreted in terms of quasiperiodic and periodic tilings, constructed with two types of bond lengths, S (about 2 nm) and L (= τ · S, where τ is the Golden ratio), of the same atom cluster with decagonal symmetry.     

Specific Features of the Local Structure and Transport Properties of ZrO2–Sc2O3–Y2O3 and ZrO2–Sc2O3–Yb2O3 Crystals

Optics and Spectroscopy - The specific features of the local structure of ZrO2–Sc2O3–Y2O3 and ZrO2–Sc2O3–Yb2O3 crystals are revealed by optical spectroscopy using the Eu3+...     

Influence of different Fe2O3 content on crystallization of MgO–Al2O3–SiO2–TiO2 system glass-ceramics

The crystallization behaviors of MgO–Al₂O₃–SiO₂–TiO₂ system glasses doping with different content Fe₂O₃ were investigated by means of differential thermal analysis and X-ray diffraction. The kinetic parameter of activation energy for crystallization (E) was obtained by the Owaza Johnson–Mehl–Avrami method. The results show that during the heat treatment, the intermediate phase of µ-cordierite initially precipitated from the glass matrix, and with the increasing temperature, it transformed to α-cordierite. The more the Fe₂O₃ content, the lower the crystallization peak temperature (T _p).But the lowering of T _p value did not mean that the value of E decreases correspondingly. The experimental results suggest that only with appropriate content (about 4.2 wt%), Fe₂O₃ can promote the crystallization of this glass effectively.     

Dy3+ doped SiO2–B2O3–Al2O3–NaF–ZnF2 glasses: An exploration of optical and gamma radiation shielding features

A series of Dy³⁺ doped zinc-aluminoborosilicate glasses with chemical composition 30SiO₂-(30-x) B₂O₃–10Al₂O₃–15NaF–15ZnF₂-xDy₂O₃ (x = 0, 0.5, 0.7, 1.0 and 1.5 mol %) were prepared by conventional melt-quenching method. Structural and optical properties of the glasses were analyzed through XRD, FTIR, UV–Visible–NIR and luminescence studies. Gamma radiation shielding parameters were obtained using PSD software. Nephelauxetic ratio (β) and bonding parameters (δ) calculated using absorption spectrum shows the decreasing ionic nature of the Dy ions. Judd-Oflet parameters (Ω₂, Ω₄ and Ω₆) obtained shows the covalency and asymmetric nature of dysprosium ions. The luminescence properties shows that Dy³⁺ doped glasses have two strong intense emission at blue (482 nm) and yellow (575 nm) region. Branching ratio and stimulated emission cross section calculated suggests the glasses suitability to act as lasing material. CIE colour coordinates and its colour correlated temperature (CCT) for the glasses were estimated and found that these prepared glasses lie in the warm white light region.     

Activation energy and conductivity of glasses in the P2O5–V2O5–Li2O system

The conductivity of glasses in the 50\textP_\text2 \textO_\text5 - x\textV_\text2 \textO_\text5 - ( 50 - x )\textLi_\text2 \textO50{\text{P}}_{\text{2}} {\text{O}}_{\text{5}} - x{\text{V}}_{\text{2}} {\text{O}}_{\text{5}} - \left( {50 - x} \right){\text{Li}}_{\text{2}} {\text{O}} system was studied as a function of temperature and composition. For all compositions, the conductivity variation as a function of temperature followed an Arrhenius type relationship. Isothermal variation of conductivity as a function of composition showed a minimum for a molar ratio x near 20. Probable mechanisms for decrease of conductivity with decrease of vanadium oxide concentration were explained. The minimum in room temperature was attributed to increase of V⁴⁺/V⁵⁺ with decrease of vanadium oxide in specific concentrations of vanadium oxide. Activation energy increased with decrease of V₂O₅ content. This behavior was attributed to increase of average spacing between vanadium ions.     

Chemical,magnetic and charge ordering in the system hematite–ilmenite,Fe2O3–FeTiO3

Spin polarized electronic structure calculations of total energies for ordered supercells in the system Fe₂O₃–FeTiO₃ suggest that some layered ordered phases are more stable than an isocompositional mechanical mixture of hematite, Fe₂O₃, and ilmenite, FeTiO₃. This result contradicts established ideas about hematite–ilmenite phase relations because it suggests that there is at least one stable ordered phase with a bulk composition intermediate between hematite and ilmenite. It is not clear if this result is an artifact of the approximations made in generalized gradient spin density functional calculations, or if an intermediate phase, or phases, is in fact stable. The electronic structure of a 30-atom layered supercell was studied by a variety of techniques. The supercell structure is FTFFFT, where F is an Fe layer and T is a Ti layer perpendicular to the hexagonal c axis. The idea was to investigate possible charge ordering on Fe sites, that is a postulate of the ‘lamellar magnetism hypothesis’, but significant Fe²⁺–Fe³⁺ordering is not predicted.     

High-Temperature superconductivity in the Y–Ba–Cu–O system

High-temperature superconductivity in the Y-Ba-Cu-O system has been discussed with special reference to the identification and characterization of the pure monophasic compound responsible for the superconductivity. The crucial role of oxygen has been examined in the light of the structure and thermogravimetric analysis.     

Glass formation in the system Li2B4O7–Pb3O4–CuO using X-ray diffraction

X-ray diffraction was performed to construct the phase diagram for the ternary Li₂B₄O₇–Pb₃O₄–CuO glass system. Three principal regions were identified: (1) a glass-forming region observed at the composition (75 < Li₂B₄O₇ < 100) mol%, (0 < CuO < 35) mol% and (0 < Pb₃O₄ < 70) mol% in the ternary system, and (100 ? x) mol% Li₂B₄O₇–x mol% Pb₃O₄ where x = 0 up to 70, (100 ? y) mol% Li₂B₄O₇–y mol% CuO where y = 0 up to 25 in the binary system;. (2) a crystalline region: all compositions prepared from the binary system Pb₃O₄–CuO and the ternary system containing Li₂B₄O₇ up to 60 mol%; (3) a partially crystalline region formed between the glass and crystalline regions.     

Manifestation of up-conversion in Yb3+/Tm3+ doped Li2O–Y2O3–SiO2 glass system

In this study, we have investigated the principal role of Y₂O₃ on the emission features of Tm³⁺ ion and up-conversion phenomenon in Tm³⁺ and Yb³⁺ co-doped Li₂O–Y₂O₃–SiO₂ glass system. The concentration of Y₂O₃ is varied from 0 to 5 mol% while that of Yb³⁺ and Tm³⁺ is fixed. When the glasses are doped with Tm³⁺ ions, the intense blue and red emissions were observed, whereas Yb³⁺ doped glasses exhibited NIR emission at about 980 nm. When the glasses are co-doped with Tm³⁺ and Yb³⁺ ions and excited at 900 nm, the blue and red emission lines were observed to be reinforced and strengthened with increase in the concentration of Y₂O₃. The IR emission band detected at about 1.8 μm due to ³F₄ → ³H₆ transition of Tm³⁺ ions is also observed to be strengthened due to co-doping. The reasons for enhancement in the intensity of various emission bands due to co-doping have been identified and discussed with the help of rate equations for various emission transitions.     

Induced crystallization and the physical properties of PbO–Sb2O3–As2O3: MoO3 glass system

PbO–Sb₂O₃–As₂O₃ glasses mixed with different concentrations of MoO₃ (ranging from 0 to 1.0 mol%) were crystallized. The samples were characterized by X-ray diffraction, scanning electron microscopy and differential thermal analysis techniques. The X-ray diffraction and the scanning electron microscopic studies have revealed the presence of Pb₅Sb₂O₈, PbSb₂O₆, SbAsO₄, Sb₂MoO₆, Sb₄Mo₁₀O₃₁, As₄Mo₃O₁₅, Pb₅Sb₄O₁₁ crystalline phases in these samples. The differential thermal analysis indicated that the surface crystallization prevails over the bulk crystallization as the concentration of the crystallizing agent is increased. The infrared (IR) spectral studies exhibit bands due to MoO₄ structural units in addition to the conventional bands due to various antimonate and arsenate structural groups. The studies on PbO–Sb₂O₃–As₂O₃: MoO₃ glass-ceramics with respect to various physical properties viz., dielectric properties over a range of frequency and temperature, optical absorption, electron spin resonance (ESR) and magnetic susceptibility at room temperature have also been reported. The optical absorption, ESR and magnetic susceptibility studies indicated that the molybdenum ions exist in Mo⁵⁺ state in addition to Mo⁶⁺ state in these samples. The redox ratio found to increase as the concentration of the MoO₃ is increased. The variations observed in all these properties with the concentration of the crystallizing agent have been analyzed in the light of different oxidation states and environment of molybdenum ions in the glass ceramic network.     

Influence of iron ions on dielectric properties of the PbO–Bi2O3–B2O3 glass system

PbO–Bi₂O₃–B₂O₃ glasses containing small concentrations of Fe₂O₃ (0–1 mol%) were subject to dielectric studies (dielectric constant ε′; loss tan δ; and ac conductivity σ _ac) over a wide range of frequency and temperature. From spectroscopic (infrared, optical absorption and ESR spectra) and magnetic susceptibility studies, variations in these properties with dopant ion concentration were analyzed in terms of different oxidation states and iron ion environment in the glass network.     

Subsolidus phase relation in the Bi_2O_3–Fe_2O_3–La_2O_3 system

Bismuth-containing semiconductor material is a hot topic in photocatalysts because of its effective absorption under the visible light.In this paper,we expect to explore a new bismuth-based photocatalyst by studying the subsolidus phase relations of the Bi2O3–Fe2O3–La2O3system.The X-ray diffraction data shows that in this ternary system the ternary compound does not exist,while seven binary compounds(including one solid solution series Bi1 xLaxO1.5with 0.167≤x≤0.339)are obtained and eight compatibility triangles are determined.     

Preparation of ZnO–Al2O3 Particles in a Premixed Flame

Zinc oxide (ZnO) and alumina (Al₂O₃) particles are synthesized by the combustion of their volatilized acetylacetonate precursors in a premixed air–methane flame reactor. The particles are characterized by XRD, transmission electron microscopy, scanning mobility particle sizing and by measurement of the BET specific surface area. Pure (-)alumina particles appear as dendritic aggregates with average mobile diameter 43–93 nm consisting of partly sintered, crystalline primary particles with diameter 7.1–8.8 nm and specific surface area 184–229 m²/g. Pure zinc oxide yields compact, crystalline particles with diameter 25–40 nm and specific surface area 27–43 m²/g. The crystallite size for both oxides, estimated from the XRD line broadening, is comparable to or slightly smaller than the primary particle diameter. The specific surface area increases and the primary particle size decreases with a decreasing flame temperature and a decreasing precursor vapour pressure. The combustion of precursor mixtures leads to composite particles consisting of zinc aluminate ZnAl₂O₄ intermixed with either ZnO or Al₂O₃ phases. The zinc aluminate particles are dendritic aggregates, resembling the alumina particles, and are evidently synthesized to the full extent allowed by the overall precursor composition. The addition of even small amounts of alumina to ZnO increases the specific surface area of the composites significantly, for example, zinc aluminate particles increases to approximately 150 m²/g. The gas-to-particle conversion is initiated by the fast nucleation of Al₂O₃ or ZnAl₂O₃, succeeded by a more gradual condensation of the excess ZnO with a rate probably controlled by the cooling rate for the flame.     

Study of electrical conductivity and phase transition in Bi2O3–V2O5 system

The solid solutions of bismuth–vanadate were prepared by the conventional solid-state reaction. The sample characterization and the study of phase transition were done by using FT-IR, X-ray diffraction (XRD) and DSC measurements. AC impedance measurements proved that the oxide ion conductivity predominantly arises from the grain and grain boundary contributions as two well-defined semicircles are clearly seen along with an inclined spike. The electrical conductivity of Bi₂O₃–V₂O₅ has been studied at different temperatures for various molar ratios. The isothermal conductivity increases with an increase in the concentration of V₂O₅ due to the vacancy migration phenomenon. It has been found that the conductivity of different compositions of Bi₂O₃–V₂O₅ increases and shows a jump in the temperature range 230–260°C due to the phase transition of BiVO₄ from monoclinic scheelite type to that of tetragonal scheelite type. The endothermic peak in DSC at around 260°C reveals the phase transition, which is also confirmed by the XRD and FT-IR analysis. The XRD patterns confirmed the monoclinic structure of BiVO₄.