花状TiO2分级结构的可控合成与其光催化性能

采用水热法可控合成了花状TiO₂分级结构材料,运用扫描电镜、透射电镜、X射线衍射、N₂物理吸附-脱附等手段,对其进行了表征,系统研究了NaOH用量、H₂O₂浓度、HNO₃浓度、反应温度及时间等因素对所得样品形貌的影响,并评价了它们的光催化性能.结果表明,花状TiO₂分级结构为锐钛矿相,颗粒大小均一;随制备条件的变化,构成花状TiO₂分级结构的基元结构分别为纳米线、纳米片,纳米线直径约25nm,纳米片厚度不足10nm;该样品具有较高的比表面积,表现出良好的单次光催化活性与重复使用性能.     

Construction of 3D hierarchical SnO2 microspheres from porous nanosheets towards NO decomposition

Three-dimensional (3D) hierarchical architectures are currently attracting worldwide interest owing to their fascinating morphology-dependent properties and potential applications. Herein we constructed SnO₂ microspheres with 3D hierarchical flower-like architectures self-assembled with porous SnS₂ nanosheets by a facile hydrothermal method with subsequent calcination. The chemical and physical properties as well as photocatalytic application of SnO₂ microspheres were investigated. The size and morphology were examined with scanning electron microscopy and transmission electron microscopy. The phase and crystalline structure were determined with powder X-ray diffraction. The UV–Vis absorption property was determined with UV–Vis diffuse reflectance. The photocatalytic activities were evaluated with nitrogen monoxide (NO) decomposition under UV–Vis light irradiation. The effects of calcination temperature on morphology and NO decomposition were also studied.     

钨酸锌纳米结构的水热合成及其光催化性能研究

使用柠檬酸钠辅助的水热法合成了具有不同形貌的ZnWO4(如片状、花状)纳米颗粒,并采用X-射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等方法对样品的结构和组成进行表征。研究了溶剂组分和溶液pH值对产物形貌的影响。通过对反应产物形貌随时间变化的观察,提出了片状和花状ZnWO4纳米颗粒可能的生长机理。以罗丹明B(RhB)为催化降解对象,对样品在水溶液中的光催化性质进行了研究。结果表明,ZnWO4纳米颗粒的比表面积和孔径尺寸等结构特性对其光催化活性具有明显影响。     

物理混合法制备分级混晶TiO2微纳米材料及其光催化性能

通过物理混合法可控合成了分级混晶TiO₂微纳米材料, 采用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射仪(XRD)、 X射线光电子能谱仪(XPS)和固体紫外-可见分光光度计(UV-Vis)等对该微纳米材料进行了表征, 并评价了不同混晶比材料的光催化性能. 结果表明, 所得材料是由均匀负载金红石纳米颗粒的锐钛矿纳米片组装的三维分级结构. 其具有很高的光催化活性, 分级结构和混晶异相结的同时引入是提高材料光催化活性的关键.     

ZnO/graphene-oxide nanocomposite with remarkably enhanced visible-light-driven photocatalytic performance

In this work, a high-performance photocatalyst of ZnO/graphene-oxide (ZnO/GO) nanocomposite was synthesized via a facile chemical deposition route and used for the photodegradation of organic dye from water under visible light. The nanocomposite was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller N(2) adsorption-desorption analysis, and UV-Vis diffusion reflectance spectroscopy. The ZnO/GO nanocomposite consisting of flower-like ZnO nanoparticles anchored on graphene-oxide sheets has a high surface area and hierarchical porosity, which is benefit to the adsorption and mass transfer of dye and oxygen species. For the photodegradation of organic dyes under visible light, ZnO/GO nanocomposite exhibited remarkably enhanced photocatalytic efficiency than graphene-oxide sheets and flower-like ZnO particles. Moreover, the photocatalytic efficiency of ZnO/GO nanocomposite could be further improved by annealing the product in N(2) atmosphere. The outstanding photocatalytic performance was ascribed to the efficient photosensitized electron injection and repressed charge carriers recombination in the composite with GO as electron collector and transporter, thus leading to continuous generation of reactive oxygen species for the degradation of methylene blue.     

Rapid synthesis of novel flowerlike K0.46Mn2O4(H2O)1.4 hierarchical architectures and their catalytic degradation of formaldehyde in aqueous solution

Novel flower-like birnessite type manganese oxide hierarchical architectures were hydrothermally synthesized from KMnO₄ solution using sodium fluorite as a reductant in sulfuric acid medium at low temperature. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and X-ray photoelectron (XPS) spectroscopes confirm that the composition of the as-fabricated product. Field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), selected area electron diffraction (SA-ED), high resolution transmission electron microscopy (HR-TEM) and N₂ adsorption–desorption isotherm reveal that the as-synthesized sample exhibits a microsized flower-like crystal with dense nanoleaves standing on their surfaces, polycrystalline, monoclinic phase structure and high BET surface area. On the basis of time-dependent experimental results, a possible mechanism for the formation of flowerlike structures is speculated. Their capability of catalytic degradation of formaldehyde solution with oxygen air bubbles were studied by using an acetylacetone calorimetric spectra, total organic carbon (TOC) method and turnover number (TON). In addition, the birnessite nanoflower is stable during the reaction and can be used repeatedly.     

Controlled fabrication of flower-like nickel oxide hierarchical structures and their application in water treatment

Flower-like NiO hierarchical structures with 2-5 μm diameter assembled from nanosheet building blocks have been successfully fabricated via a wet-chemical method combined with thermodecomposition technology. The template-free method is facile and effective in preparing flower-like NiO superstructures in high yield. The intermediate product and final hierarchical structures are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform IR (FTIR), and thermogravimetric analysis (TGA). The effects of growth temperature and reaction time on the morphologies of the as-prepared structures were investigated by SEM characterization and a possible mechanism for the formation of flower-like NiO is proposed. Based on the nitrogen adsorption and desorption measurements, the BET surface area of the as-obtained sample is 55.7 m2/g and the pore-size distribution plot indicates a bimodal mesopore distribution, with pore sizes of ca. 2.6 nm and 7.4 nm, respectively. In comparison with sphere-like and rod-like structures, the flower-like NiO hierarchical structures show an excellent ability to rapidly remove various pollutants when used as adsorbent and photocatalyst in waste-water treatment, which may be attributed to its unique hierarchical and porous surface structures.     

Improved visible light photocatalytic activity of sphere-like BiOBr hollow and porous structures synthesized via a reactable ionic liquid

BiOBr uniform flower-like hollow microsphere and porous nanosphere structures have been successfully synthesized through a one-pot EG-assisted solvothermal process in the presence of reactable ionic liquid 1-hexadecyl-3-methylimidazolium bromide ([C(16)mim]Br). The as-prepared samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and diffuse reflectance spectroscopy (DRS). Possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid [C(16)mim]Br played the role of solvent, reactant and template at the same time. Moreover, the photocatalytic activities of BiOBr flower-like hollow and porous structures were evaluated on the degradation of rhodamine B (RhB) under visible light irradiation. The results assumed that BiOBr porous nanospheres sample showed much higher photocatalytic activity than the conventionally prepared sample and TiO(2) (Degussa, P25). The relationship between the structure of the photocatalyst and the photocatalytic activities were also discussed in detail; it can be assumed that the enhanced photocatalytic activities of BiOBr materials could be ascribed to a synergistic effect, including high BET surface area, the energy band structure, the smaller particle size and light absorbance.     

油水自组装制备Ag@AgBr/BiOBr高效可见光催化剂

采用油水自组装法制备Ag@AgBr表面修饰三维花状结构BiOBr复合光催化剂(Ag@AgBr/BiOBr),利用XRD、SEM、TEM、EDX、DRS、XPS、PL及EIS等手段对光催化剂的结构和性能进行了表征,并研究了可见光下降解亚甲基蓝(MB)的催化性能.研究表明:Ag@AgBr粒径约为20nm,均匀分散在花状微球BiOBr表面上;贵金属Ag的表面等离子体效应可显著增强可见光利用率,并有效促进光生电子空穴对的分离,Ag@AgBr(15wt%)/BiOBr光催化剂展现出最优的催化活性,可见光照射30min对MB的降解率将近90%,淬灭实验表明·O₂^-,h⁺和Br⁰均为活性物种.结合理论分析与实验结果提出复合光催化剂的降解机理.     

油水自组装制备Ag@AgBr/BiOBr高效可见光催化剂

采用油水自组装法制备Ag@Ag Br表面修饰三维花状结构Bi OBr复合光催化剂(Ag@Ag Br/Bi OBr),利用XRD、SEM、TEM、EDX、DRS、XPS、PL及EIS等手段对光催化剂的结构和性能进行了表征,并研究了可见光下降解亚甲基蓝(MB)的催化性能。研究表明:Ag@Ag Br粒径约为20 nm,均匀分散在花状微球Bi OBr表面上;贵金属Ag的表面等离子体效应可显著增强可见光利用率,并有效促进光生电子空穴对的分离,Ag@Ag Br(15wt%)/Bi OBr光催化剂展现出最优的催化活性,可见光照射30 min对MB的降解率将近90%,淬灭实验表明·O2-,h+和Br0均为活性物种。结合理论分析与实验结果提出复合光催化剂的降解机理。     

Effect of 3D ZnO:Fe morphology on the photocatalytic activity under solar irradiation

Nanoparticles, microsphere, hedgehog sphere-like and flower-like ZnO:Fe photocatalysts were prepared by the hydrothermal method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet/visible absorption spectra (UV?CVis). The results show that the ZnO:Fe photocatalysts with different 3D morphologies are a hexagonal wurtzite structure with space group of p63mc. The pH value of the precursor has a great influence on various morphologies of ZnO:Fe photocatalysts. The flower-like and hedgehog sphere-like ZnO:Fe photocatalysts exhibit the high solar photocatalytic behavior on methylene blue (MB). The ZnO:Fe order of photocatalytic activity is as follows: flower?>?hedgehog sphere?>?microsphere?>?nanoparticle. The flower-like ZnO:Fe is optimal, which exhibits the highest degradation rate of 98% for light time of 5?h.     

Photocatalytic activity of ZNO with different morphologies synthesized by a sonochemical method

Different morphologies of ZnO structures were successfully synthesized in precursor solutions with the pH of 8, 9, 10, 11, and 12 by a sonochemical method at room temperature. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) and Raman spectroscopy. The photocatalytic activities of ZnO samples with different morphologies were evaluated via the degradation of methylene blue (C₁₆H₁₈ClN₃S). In this research, the flower-like ZnO sample of densely assembled nanoplates exhibited the highest photodegradation of 64% under UV light irradiation within 300 min.     

Flower-like Au/Ag/TiO<Subscript>2</Subscript> nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO₂ coated Au nanostars and core-shell Au@Ag nanostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF₄ under an acidic environment. The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO₂ nanoparticles. The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO₂ shell.     

具有分级多孔结构和光催化性质的核-壳纳米球(HP-Fe2O3@TiO2)

通过溶剂热和溶胶-凝胶涂层法, 设计并制备了具有分级多孔结构和光催化性质的核-壳纳米球(HP-Fe₂O₃@TiO₂). 透射电子显微镜(TEM)照片证明所得HP-Fe₂O₃@TiO₂样品具备分级多孔结构, 这是因为HP-Fe₂O₃@TiO₂的内核-Fe₂O₃具有大孔空隙, 同时外壳-TiO₂具有介孔空隙. 此外, 通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、X射线光电子能谱(XPS)以及氮气吸附-脱附曲线深入研究了HP-Fe₂O₃@TiO₂的结构及其性质. 分别在可见及紫外光照下, 研究了样品在H₂O₂体系下的光催化降解亚甲基蓝(MB)的性质. 所观察到的HP-Fe₂O₃@TiO₂纳米球的光催化性能, 可归因于核-壳结构的协同作用, 这进一步表明, TiO₂外壳对α-Fe₂O₃的光催化活性有重要影响作用. 在可见光照射下, HP-Fe₂O₃@TiO₂ (1 mL Ti(OC₄H₉)₄ (TBT))具有较优异的光催化活性. 同时, HP-Fe₂O₃@TiO₂ (4mL TBT)具备优异的单分散形貌, 并在紫外光照射下, 表现出最优的光催化活性.     

花状ZnO/ZnS异质结构的简易合成、结构表征及光催化活性

采用简便的两步溶液相化学方法,在较低温度下(80℃),制备出了花状的ZnO/ZnS异质结构。分别利用X射线衍射、X射线光电子能谱仪、扫描电子显微镜、透射电子显微镜、紫外-可见光谱仪等测试手段对所制备的样品进行表征,结果表明ZnO/ZnS异质结构是由花状ZnO纳米结构和ZnS纳米粒子组成。在光降解罗丹明B(RhB)的测试中,ZnO/ZnS异质结构样品体现出了比ZnO前驱物和商业P25光催化剂更高的光催化效率,这主要可归因于异质结构更有利于电子-空穴的有效分离。ZnO/ZnS光催化剂体现出良好的循环稳定性。     

Synthesis of Ag2O and Ag co-modified flower-like SnS2 composites with enhanced photocatalytic activity under solar light irradiation

Three-dimensional Ag₂O and Ag co-modified flower-like SnS₂ composites have been synthesized through a facile hydrothermal and photoreduction process. The physical and chemical properties of Ag₂O and Ag co-modified flower-like SnS₂ composites were carefully studied by using XRD, SEM, TEM, UV–vis diffuse reflectance spectra (DRS) and XPS. The photocatalytic activity of the as-prepared products was evaluated by photocatalytic decolorization of Rhodamine B (Rh B) aqueous solution at ambient temperature under solar light irradiation. The photocatalytic result shows that Ag₂O and Ag co-modified flower-like SnS₂ composites exhibit enhanced photocatalytic activity compared with that of pure SnS₂. Three of the Ag₂O and Ag co-modified flower-like SnS₂ composites form the Z-scheme systems, because of their unique charge-carrier transfer process, the oxidation/reduction ability of photogenerated holes and electrons could be enhanced. Therefore, the new Ag₂O and Ag co-modified flower-like SnS₂ composites possess a favorable photocatalytic activity, and it can be a promising candidate for the solar energy conversion process.     

表面活性剂对水热制备钨酸铋形貌及光催化性能的影响

通过简单水热制备了大小均一,直径约为2.5 μm的球状Bi2WO6粉体.系统研究表面活性剂SDS和PVP对水热制备Bi2WO6光催化剂的影响.利用XRD,EDS,SEM,TEM和DRS等分析技术对催化剂的组成、形貌、比表面积和带隙宽度等进行了表征.实验结果表明,表面活性剂对催化剂的形貌和催化活性有较大影响.在水热制备过...     

Microwave-assisted solution synthesis and photocatalytic activity of Ag nanoparticles supported on ZnO nanostructure flowers

Ag nanoparticles supported on the surface of three-dimensional (3D) flower-like ZnO nanostructure were synthesized by a microwave-assisted solution method. The obtained products were characterized by X-ray diffraction analysis, field-emission scanning electron microscopy, Fourier-transform infrared spectroscopy, Raman spectrophotometry, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy. The analytical results confirmed homogeneously distributed Ag nanoparticles supported on the surface of flower-like ZnO nanostructure. The photocatalytic effect of the heterostructure Ag/ZnO nanocomposites was investigated using photodegradation under ultraviolet (UV) light of methylene blue as model dye. The heterostructure Ag/ZnO nanocomposites exhibited much higher photocatalytic activity than pure ZnO flowers. The improved photocatalytic properties are attributed to formation of a Schottky barrier at the metal–semiconductor interface of the Ag/ZnO nanocomposites.     

片花状ZnO@碳球核壳结构的制备及太阳光催化性能

采用水热法合成具有核壳结构的片花状ZnO@碳球系列复合物(ZnO@C)。利用X射线衍射(XRD),扫描电子显微镜(SEM),X射线光电子能谱(XPS),红外光谱(FTIR),紫外可见漫反射光谱(UV-Vis DRS),荧光光谱(PL)以及N2吸附-脱附等技术对所合成样品进行表征,结果表明,碳球被ZnO纳米片包裹形成具有核壳结构的片花状复合物,碳球的存在增加了ZnO对可见光的吸收,有效抑制了光生电子空穴对的复合。在模拟太阳光下,对活性染料GR黑及甲硝唑的光催化降解测试结果显示,ZnO@C系列复合物的光催化性能均高于纯ZnO,其中ZnO@C-2样品表现出最好的光催化性能,其光催化降解GR黑和甲硝唑的速率分别为纯ZnO的4.2倍和2.1倍。     

片花状ZnO@碳球核壳结构的制备及太阳光催化性能

采用水热法合成具有核壳结构的片花状ZnO@碳球系列复合物（ZnO@C）。利用X射线衍射（XRD）,扫描电子显微镜（SEM）,X射线光电子能谱（XPS）,红外光谱（FTIR）,紫外可见漫反射光谱（UV-Vis DRS）,荧光光谱（PL）以及N₂吸附-脱附等技术对所合成样品进行表征,结果表明,碳球被ZnO纳米片包裹形成具有核壳结构的片花状复合物,碳球的存在增加了ZnO对可见光的吸收,有效抑制了光生电子空穴对的复合。在模拟太阳光下,对活性染料GR黑及甲硝唑的光催化降解测试结果显示,ZnO@C系列复合物的光催化性能均高于纯ZnO,其中ZnO@C-2样品表现出最好的光催化性能,其光催化降解GR黑和甲硝唑的速率分别为纯ZnO的4.2倍和2.1倍。