Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

Sensitive determination of the endocrine disruptor bisphenol A at ultrathin film based on nanostructured hybrid material SiO<Subscript>2</Subscript>/GO/AgNP

In this work, we described an electrochemical sensor using a nanocomposite based on graphene oxide (GO), silver nanoparticles (AgNP), and disordered mesoporous silica (SiO₂), which was used for the determination of bisphenol A in water samples. Initially, the hybrid material SiO₂/GO was synthesized via sol-gel process, subsequently decorated with AgNP with an approximate 20 nm particle size prepared directly on the surface of the SiO₂/GO using N, N-dimethylformamide (DMF) as an agent reducer. A glassy carbon electrode was modified with SiO₂/GO/AgNP and used in developing a sensitive electrochemical sensor for the determination of bisphenol A in phosphate buffer 0.1 mol L^?1 (pH 7.0). The detection limit was 45.2 nmol L^?1 with a linear response range between 1.0 × 10^?7 and 2.6 × 10^?6 mol L^?1 and a sensitivity of 1.27 × 10^?7 A mol^?1 L. Finally, the optimized electrochemical sensor was used for the quantitation of endocrine interfering in natural waters.     

Chiral nematic assemblies of silver nanoparticles in mesoporous silica thin films

Silver nanoparticles (NPs) have been synthesized inside mesoporous silica films with chiral nematic structure. Circular dichroism measurements of the silver NP-loaded silica films show NP-based optical activity in the vicinity of the surface plasmon resonance. These materials, with an optical response associated with the chiral assembly of metal NPs, may be useful for developing new sensors.     

Silver Nanoparticle Thin Films with Nanocavities for Surface‐Enhanced Raman Scattering

The formation of nanometer‐sized gaps between silver nanoparticles is critically important for optimal enhancement in surface‐enhanced Raman scattering (SERS). A simple approach is developed to generate nanometer‐sized cavities in a silver nanoparticle thin film for use as a SERS substrate with extremely high enhancement. In this method, a submicroliter volume of concentrated silver colloidal suspension stabilized with cetyltrimethylammonium bromide (CTAB) is spotted on hydrophobic glass surfaces prepared by the exposure of the glass to dichloromethysilane vapors. The use of a hydrophobic surface helps the formation of a more uniform silver nanoparticle thin film, and CTAB acts as a molecular spacer to keep the silver nanoparticles at a distance. A series of CTAB concentrations is investigated to optimize the interparticle distance and aggregation status. The silver nanoparticle thin films prepared on regular and hydrophobic surfaces are compared. Rhodamine 6G is used as a probe to characterize the thin films as SERS substrates. SERS enhancement without the contribution of the resonance of the thin film prepared on the hydrophobic surface is calculated as 2×10⁷ for rhodamine 6G, which is about one order of magnitude greater than that of the silver nanoparticle aggregates prepared with CTAB on regular glass surfaces and two orders of magnitude greater than that of the silver nanoparticle aggregates prepared without CTAB on regular glass surfaces. A hydrophobic surface and the presence of CTAB have an increased effect on the charge‐transfer component of the SERS enhancement mechanism. The limit of detection for rhodamine 6G is estimated as 1.0×10^?8 M . Scanning electron microscopy and atomic force microscopy are used for the characterization of the prepared substrate.     

Enhanced electrochemical performance of SnS nanoparticles/CNTs composite as anode material for sodium-ion battery

SnS/CNTs composite as anode for SIBs exhibits high reversible capacity, good cyclability as well as rate performance, which is superior to that of pure SnS. The enhanced electrochemical performance can be attributed to the adding of CNTs as a flexible and conductive structure supporter and the formation of SnS nanoparticles with small diameter.     

Chitosan‐Based Glucose Oxidase Electrodes Enhanced by Silver Nanoparticles

Silver nanoparticles enhanced glucose oxidase electrodes were prepared on the basis of chitosan matrix. The enzyme electrodes exhibited high sensitivity and excellent response performance to glucose with a linear range from 1×10^?6 to 8×10^?3 mol · L^?1. And the time reaching the steady‐state amperometric response was less than 5 seconds. The inhibition percentage of this enzyme electrode against copper ions concentration was linear ranging from 1.2×10^?6 to 5×10^?5 mol · L^?1. These properties of enzyme electrodes are probably due to the excellent electron transfer of silver nanoparticles and the orientation of glucose oxidase molecule.     

Ag nanoparticles deposited onto silica,titania, and zirconia mesoporous films synthesized by sol–gel template method

A variety of Ag nanoparticles/oxide mesoporous films with templated silica, titania, and zirconia was synthesized by sol–gel method at glass, aluminum, and silicon substrates using metal alkoxides (tetraethoxysilane, titanium tetraisopropoxide, and zirconium tetrapropoxide) and AgNO₃ as precursors of oxide films and Ag nanoparticles, respectively, and Pluronic P123 as a template agent. Oxide films alone and Ag/oxide composites were characterized using hexane adsorption, X-ray diffraction (XRD), Raman and ultraviolet (UV)/vis spectroscopies, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The distribution of Ag nanoparticles within the films, their sizes, intensity, and position of surface plasmon resonance (SPR) absorbance band at λ = 400 nm, as well as the textural and structural characteristics of whole films depend on treatment temperature, types of substrates and oxide matrices, oxide crystallization, and Ag content. Ag nanoparticles form preferably on the outer surface of the films under lower sintering temperatures if the amount of loaded silver is low. Oxide crystallization (e.g., TiO₂) promotes silver embedding into the outer film layer. At higher silver content (≥10 at.%) and higher calcination temperature (873 K), silver nanoparticles could be entrapped more uniformly along the film profile because of more intensive evaporation of silver droplets from the outer surface of the films on heating.     

Controlled synthesis and enhanced bacteriostatic activity of Mg(OH)<Subscript>2</Subscript>/Ag nanocomposite

Silver nanoparticles have good sterilization performance due to their small size and large specific surface area, while the small size also brings about reunification and reduces the sterilization activity. To resolve the problem, magnesium hydroxide [Mg(OH)₂] microsphere was designed as a supported material to load silver particles on its surface. Mg(OH)₂ microspheres were successfully synthesized under the control of a biotemplate of eggshell membrane. X-ray diffraction, thermal gravimetric analysis/differential scanning calorimetry, and transmission electron microscopy were performed to characterize the Mg(OH)₂ microspheres. The results indicate that the Mg(OH)₂ microspheres of average size ~ 2 μm were formed from nanoflakes. The silver nanoparticles were loaded on the surface of Mg(OH)₂ microspheres to form Mg(OH)₂/Ag nanocomposite, which exhibited enhanced antibacterial effect compared to that of silver nanoparticles. The enhanced antibacterial mechanism was investigated in detail.     

Synthesis of highly pure nanocrystalline and mesoporous CaTiO3 by a particulate sol–gel route at the low temperature

The low temperature perovskite-type calcium titanate (CaTiO₃) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol–gel route. The prepared sol had a narrow particle size distribution about 17 nm. X-ray diffraction and Fourier transform infrared spectroscopy revealed that, the synthesized powders had highly pure and crystallized CaTiO₃ structure with preferable orientation growth along (1 2 1) direction at 400–800 °C. The activation energy of crystal growth was calculated 5.73 kJ/mol. Furthermore, transmission electron microscope images showed that the average crystallite size of the powders annealed at 400 °C was around 3.5 nm. Field emission scanning electron microscope analysis and atomic force microscope images revealed that, the deposited thin films had uniform, mesoporous and nanocrystalline structure with the average grain size in the range 33–39 nm depending on annealing temperature. Based on Brunauer–Emmett–Teller (BET) analysis, the synthesized powders showed mesoporous structure with BET surface area in the range 51–21 m²/g at 400–800 °C. One of the smallest crystallite size and one of the highest surface areas reported in the literature is obtained which can be used in many applications, such as photocatalysts.     

Synthesis of highly stable silver nanoparticles using imidazolium-based ionic liquid

Highly stable, aqueous dispersions, and hydrophilic ionic liquid-capped silver nanoparticles with positive surface charge were synthesized by in situ reduction of AgNO₃ with NaBH₄ in the presence of an imidazolium-based ionic liquid, viz., 1-dodecyl-3-methylimidazolium chloride ([C₁₂mim][Cl]) at room temperature. Prepared silver nanoparticles were characterized by UV–vis spectra, transmission electron microscopy (TEM), and zeta potential. UV–visible spectrum of the aqueous medium peaked at 407 nm corresponding to the plasmon absorbance of silver nanoparticles. TEM analysis revealed the spherical shape of the particles with sizes about 9 nm and low polydispersed. The surface charge of the synthesized silver nanoparticles was determined as +5.0 mV. The ionic liquid ([C₁₂mim][Cl]) capped silver nanoparticles were stable for at least 8 months.     

A wet chemical preparation of transparent conducting thin films of Ga-doped ZnO nanoparticles

Crystalline gallium doped zinc oxide (GZO) nanopowders were synthesized using hydrothermal treatment processing. The doping concentration affected the phase structure as well as the shape of the nanopowder from nano rod-like structure to nanoparticulate one. The specific BET surface area increases with increasing the gallium doping concentration. Transparent conducting films were deposited on borosilicate glass substrate by spin coating using sols containing GZO nanoparticles dispersed in 1-propanol. The films are crystalline with a hexagonal structure. The effect of Ga doping concentration, sintering temperature and thickness of the layers has been investigated. The lowest resistivity achieved was 6.4 × 10^?2 Ω cm for a thickness of 150 nm. The films present a transmittance in the visible range as high as 90 %.     

Silver modified magnetic carbon nanotubes composite as a selective solid phase extractor for preconcentration and determination of trace mercury ions in water solution

A magnetic composite of silver/iron oxides/carbon nanotubes (Ag/Fe₃O₄/CNTs) was synthesized and used as an adsorbent for the preconcentration of mercury ions in water solutions at room temperature (25°C) in this study. The silver nanoparticles were supported on the magnetic CNTs. The modification enabled the composite had not only a high adsorption capacity for mercury ions (Hg²⁺) but also the magnetic isolation properties. A fast, sensitive, and simple method was successfully developed for the preconcentration and determination of trace amount of Hg²⁺ in water using the synthesized nanocomposite as adsorbent. The mercury concentration was determined by an atomic fluorescence spectrometer (AFS). The experimental conditions such as pH value, extraction temperature, extraction time, sample volume, eluent composition and concentration, sorbent amount, and coexisting ions were investigated for the optimization. A 500 mL of sample volume resulted in a preconcentration factor of 125. When a 200 mL of sample was employed, the limit of detection for Hg²⁺ was as low as 0.03 ng mL^?1with relative standard deviation of 4.4% at 0.1 ng mL^?1 (n = 7). The ease of synthesis and separation, the good adsorption capacity, and the satisfactory recovery will possibly make the composite an attractive adsorbent for the preconcentration of ultratrace Hg²⁺ in waters.     

Enhancement of third-order optical nonlinearities in 3-dimensional films of dielectric shell capped Au composite nanoparticles

The composite nanoparticles of Au-core capped by CdS shells of different thickness were prepared and assembled into densely packed 3-dimensional films by the layer-by-layer self-assembly (LBL) technique. These films exhibited the 3-dimensional structure of densely packed Au@CdS composite nanoparticles and the shell thickness was tunable by changing the concentration of Cd2+-thiourea complexes. These multilayer films exhibited enhanced third-order optical nonlinear responses and ultrafast response times (several picoseconds). The third-order nonlinear optical susceptibility of the film with the CdS shell thickness of 4.4 nm was estimated to be 1.48 x 10(-9) esu and the value decreases with the increase of the CdS shell thickness. The enhancement of the optical nonlinearity was explained based on the calculation according to the electrostatic approximation by the solution of Laplace's equation under the boundary conditions appropriate to the model of core-shell nanoparticles, and mainly attributed to localized electric field effects in the CdS shell region. Additionally, the nonlinearity was optimized by determination of the values of the dielectric constant and thickness of the different shell.     

Characterization of iron-mesoporous molecular sieves obtained by a microwave-hydrothermal process

Fe-SBA-15 materials with different Si/Fe ratios (Si/Fe = 90, 50, 10) have been synthesized by a microwave-hydrothermal (M-H) process and characterized by several spectroscopic techniques. Electrons spin resonance and Mössbauer spectroscopies, along with electron microscopy and X-ray diffraction, allowed differentiation of several iron species. These species correspond to hematite particles, very small “isolated” or oligomeric Fe^III species possibly incorporated in the mesoporous silica wall, and Fe^III oxide clusters either isolated or agglomerated, forming “rafts” at the surface of the silica and exhibiting ferromagnetic ordering. Due to their agglomeration, these clusters appear with a two-peak size distribution, with one peak corresponding to the isolated clusters formed in the mesopores and still embedded in them (ca. 2 nm diameter) and the other corresponding to the agglomerates spread on the surface of the mesoporous silica particles (ca. 9 nm).     

High-temperature hydrothermal synthesis of magnetically active, ordered mesoporous resin and carbon monoliths with reusable adsorption for organic dye

Magnetically active, thermally stable, and ordered mesoporous resin (MOMR-200) and carbon (MOMC-200) monoliths were prepared by one-pot hydrothermal synthesis from resol, copolymer surfactant, and iron cations at high-temperature (200 ^°C), followed by calcination at 360 ^°C and carbonization at 600 ^°C. X-ray diffraction results show that both MOMR-200 and MOMC-200 have ordered hexagonal mesoporous symmetry, and N₂ isotherms indicate that these samples have uniform mesopores (3.71, 3.45 nm), high surface area (328, 621 m²/g) and large pore volume (0.31, 0.43 cm³/g). Transmission electron microscopy shows that iron nanoparticles, which are superparamagnetic in nature, are dispersed in the network. More importantly, the high temperature (200 ^°C) products exhibit much better stability than the samples synthesized at low temperature (100 ^°C). Interestingly, MOMC-200 has higher adsorption capacity for organic dyes when compared with commercial adsorbents (activated carbon and macroporous resin: XAD-4). Combining the advantages such as magnetically active, thermally stable networks, ordered and open mesopores, high surface area, large pore volume, adsorption of pollutants in water and desorption in ethanol solvent, MOMC-200 is potentially important for water treatments.     

A Green Approach for the Synthesis of Silver Nanoparticles Using Root Extract of <Emphasis Type="Italic">Chelidonium majus:</Emphasis> Characterization and Antibacterial Evaluation

In this study, silver nanoparticles (Ag-NPs) have been synthesized using extract of Chelidonium majus root in aqueous solution at room temperature. The root extract was able to reduce Ag⁺ to Ag⁰ and stabilized the nanoparticles Different physico-chemical techniques including UV–Vis spectroscopy, transmission electron microscopy and powder X-ray diffraction (PXRD) were used for the characterization of the biosynthesized Ag-NPs obtained. The surface plasmon resonance band appeared at 431 nm is an evidence for formation of Ag-NPs. TEM imaging revealed that the synthesized Ag-NPs have an average diameter of around 15 nm and with spherical shape. Moreover the crystalline structure of synthesized nanoparticles was confirmed using XRD pattern. Furthermore antimicrobial activities of synthesized Ag-NPs were evaluated against Escherichia coli -ATCC 25922 and Pseudomonas aeruginosa ATCC 2785 bacteria strain.     

A High-Performance Catalytic and Recyclability of Phyto-Synthesized Silver Nanoparticles Embedded in Natural Polymer

The present work deals with phytogenic synthesis of Ag NPs in the natural polymer alginate as support material using Aglaia elaeagnoidea leaf extract as a reducing, capping, and stabilizing agent. Ag nanoparticles embedded in alginate were characterized using UV–Vis absorption spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, transmission electron microscopy techniques and selected area electron diffraction techniques. The formation of AgNPs embedded in the polymer was in spherical shape with an average size of 12 nm range has been noticed. The prepared embedded nanoparticles in polymer were evaluated as a solid heterogeneous catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) and methylene blue to leuco methylene blue in the liquid phase using sodium borohydride (NaBH₄) as reducing agent. The silver nanoparticles embedded polymer exhibited extraordinary catalytic efficacy in reduction of 4-NP to 4-AP and the rate constant is 0.5054 min^?1 at ambient conditions. The catalyst was recycled and reused up to 10 cycles without significant loss of catalytic activity. The preparation of Ag–CA composite was facile, stable, efficient, eco-friendly, easy to recycle, non-toxic, and cost effective for commercial application.     

Development of a Novel Silver Nanoparticles-Enhanced Screen-Printed Amperometric Glucose Biosensor

Abstract

A disposable glucose biosensor is developed by immobilizing glucose oxidase into silver nanoparticles-doped silica sol-gel and polyvinyl alcohol hybrid film on a Prussian blue-modified screen-printed electrode. The silver nanoparticles-enhanced biosensor shows a linear amperometric response to glucose from 1.25 × 10^?5 to 2.56 × 10^?3 with a sensitivity of 20.09 mA M^?1 cm^?2, which is almost double that of the biosensors without silver nanoparticles. The immobilized glucose oxidase retained 91% of its original activity after 30 days of storage in phosphate buffer (pH 6.9; 0.1 M) at 4°C. Blood glucose in a rabbit serum sample was successfully measured with the biosensor.     

Photochemical Preparation of Nanoparticles of Ag in Aqueous-Alcoholic Solutions and on the Surface of Mesoporous Silica

Stable nanoparticle colloids of silver were obtained by irradiation of aqueous-alcoholic solutions of AgNO₃ in the presence of mesoporous SiO₂ powder and films modified with benzophenone (BP/SiO₂). Colloidal solutions of Ludox silica were used to stabilize the photochemically produced nanoparticles of silver in solution. Formation of nanoparticles of Ag on the surface of mesoporous silica occurred on irradiation of SiO₂ modified with silver ions (Ag⁺/SiO₂) in the presence of benzophenone solution.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 100–104, March–April, 2005.     

Mesoporous MnO2 synthesized by hydrothermal route for electrochemical supercapacitor studies

Poorly crystalline mesoporous MnO₂, which is suitable for supercapacitor studies, is synthesized from neutral KMnO₄ aqueous solution by hydrothermal route. But it requires a high temperature (180 °C) and also a long reaction time (24 h). Addition of a tri-block copolymer, namely, poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123), which is generally used as a soft template for the synthesis of nano-structured porous materials, reduces the hydrothermal temperature to 140 °C and also reaction time to 2 h. When the reaction time is increased, the product morphology changes from nanoparticles to nanorods with a concomitant decrease in BET surface area. Also, the product tends to attain crystallinity. The electrochemical capacitance properties of MnO₂ synthesized under varied hydrothermal conditions are studied in 0.1 M Na₂SO₄ electrolyte. A specific capacitance of 193 F?g^?1 is obtained for the mesoporous MnO₂ sample consisting of nanoparticle and nanorod mixed morphology synthesized in 6 h using P123 at 140 °C.