气体再燃低NOx燃烧中NO与NHi的反应机理研究

采用量子化学密度泛函理论(DFT)对NO与NH_i自由基的反应机理进行了研究,并结合经典过渡态理论对各反应速率常数进行了计算。结果表明,NO与NH₂自由基的反应体系可通过六个反应通道形成N₂+H₂O、N₂O+H₂和N₂H+OH。从能量变化和反应速率两方面考虑,产物N₂+H₂O最容易生成,其最佳反应通道为NO+NH₂→→N₂+H₂O;NO与NH自由基的反应体系可通过七个反应通道形成N₂+OH、N₂O+H和N₂H+O;其中,N₂+OH最容易生成,最佳反应通道为NO+NH→→N₂+OH。比较发现, NH比NH₂自由基更易与NO发生反应生成N₂。因此,在实际运行中改变操作条件,实现NH₂等向NH方向转化,有利于NO_x的还原。     

Effect of SO2 on the NO Oxidation over Different Oxide Supports

The catalytic oxidation of NO to NO₂ in flue gas will enable removal of NO_x through wet scrubbing of NO_x simultaneously with SO₂.The activity of catalyst used in reaction has strong relation with its support material. In this work the oxidation of NO to NO₂ in the simulated flue gas (NO 550ppm, SO₂ 2500ppm, O₂ 4.5% and balance N₂) has been investigated over different oxide support materials. The tests of support activities were carried out in a fixed-bed reactor at a space velocity of at least 3000h^-1. The effluent gas composition was analyzed by gas chromatography. The SO₂ effect on the oxidation pf NO at 150℃ was studied using four different support materials as Al₂O₃, TiO₂, ZrO₂ and SiO₂.     

The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

CeO2/TiO2 Monolith Catalyst for the Selective Catalytic Reduction of NOx with NH3: Influence of H2O and SO2

The influences of H₂O and SO₂ on CeO₂/TiO₂ monolith catalyst for the selective catalytic reduction(SCR) of NO_x with NH₃ were investigated. In the absence of SO₂, H₂O inhibited the SCR activity, which might be ascribed to the competitive adsorption of H₂O and reactants such as NH₃ and/or NO_x. SO₂ could promote the SCR activity of CeO₂/TiO₂ monolith catalyst in the absence of H₂O, while in the presence of H₂O it speeded the deactivation. During the SCR reaction in SO₂-containing gases, Ce(III) sulfate species formed on the catalyst surface, resulting in the enhancement of Brønsted acidity. This played a significant role in the enhanced SCR activity. However, in the presence of both H₂O and SO₂, a large amount of ammonium-sulfate salts formed on the catalyst surface, which resulted in the blocking of catalyst pores and deactivated the catalyst. In addition, the NO_x conversion was more sensitive to gas hourly space velocity in the presence of H₂O than in the absence of H₂O. The relatively high space velocity would result in a higher formation rate of ammonium-sulfate salts on per unit catalyst in the presence of H₂O and SO₂, which caused obvious deactivation of Ce/TiO₂ monolith catalyst.     

煤炭解耦燃烧过程N迁移与转化Ⅱ:单组分气相化学反应实验

在理想平推流反应器中进行了模拟热解气对模拟烟气中NO、N₂O的还原实验研究,考察了反应温度、过剩空气系数λ、热解气中CH₄、CO、H₂、NH₃浓度、烟气中NO、N₂O浓度变化对NO、N₂O出口浓度的影响。实验结果表明,当模拟热解气仅含其中一种气体时,在反应温度973~1 223 K时热解气中CH₄、CO、H₂基本不与NO发生反应,当λ小于或等于1.0时可降低N₂O浓度0%~30%;热解气中NH₃可降低NO 10%~60%,但NH₃不与N₂O发生反应。     

Radiation induced scavenging of NOx, SO2, H2S from exhaust gases

The theoretical model of exhaust gases radiation induced oxidation was developed. NO, SO₂ and H₂S concentrations curves vs dose calculated by use of this model for mixtures containing N₂ (80.5%), O₂ (11%), H₂O (8.4%), NO (100–600 ppm), SO₂ (150–500 ppm) and H₂S (300–1000 ppm) have been obtained. It has been shown that NO and SO₂ conversion reactions with acids formation go simultaneously with oxidizing reaction of H₂S giving SO₂ as an intermediate substance. These processes were evaluated for different initial concentrations of NO, SO₂ and H₂S. Data established by our simulation calculations show that the electron beam process can be judged as a promising technology for simultaneous removal of SO₂, NO and H₂S from exhaust gases.     

Pilot-scale test on electron beam treatment of municipal solid waste flue gas with spraying slaked-lime slurry

Simultaneous removal of NO_x, SO₂ and HCl in flue gas of a municipal solid waste incinerator was studied by using electron beam irradiation technology. The flue gas around of 1000 Nm³/h was led to a spray-dryer-type reactor from an inlet of ESP of the municipal waste incinerator by spraying slaked-lime slurry with one or more stoichiometic amount of the pollutants, concentrations of HCl (400 ppm) and SO₂ (50 ppm) decreased almost completely, while concentrations of NO_x (100 ppm) were markedly decreased to about 20 ppm by electron beam irradiation with a dose of 10 kGy at 150°C under spraying slaked-time slurry of two stoichiometric amounts. The removal of NO_x was improved by increasing the dose and the amount of spraying slaked-time slurry, and by lowering the irradiation temperature.     

煤炭解耦燃烧过程N迁移与转化Ⅲ:多组分气相化学反应实验

在理想平推流反应器中进行了模拟热解气对模拟烟气中NO、N₂O的还原实验研究,考察了反应温度、过剩空气系数,模拟热解气中CH₄、CO、H₂、NH₃入口浓度与模拟烟气中NO、N₂O入口浓度对NO、N₂O与总氮转化率的影响。结果表明,向NH₃添加可燃气体CO、H₂、CH₄可使NO还原窗口向低温方向移动150~200 K,该温度窗口为1 073~1 223 K;但NH₃-CO-H₂-CH₄-O₂体系对NO、N₂O的还原分解作用依赖于体系的O₂浓度,仅在富燃料情形(过剩空气系数λ为0.6)下可分别达60.6%、100%的NO、N₂O脱除率;在反应温度1 073~1 223 K及过剩空气系数λ为0.6条件下,较高的热解气CH₄、CO、H₂浓度可增加NO排放,但有利于还原N₂O;增加NH₃入口浓度可增加NO分解率。     

SO_2和H_2O对CeO_2/TiO_2/堇青石催化剂选择催化还原NO_x性能的影响

采用浸渍法制备了以堇青石为基底、氧化铈为活性组分的整体式脱硝催化剂CeO2/TiO2/堇青石催化剂。通过与商业钒基催化剂(V2O5-WO3/TiO2/堇青石)的对比研究发现,CeO2/TiO2/堇青石催化剂表现出了优良的抗硫抗水性能,经过30 h抗硫抗水实验,CeO2/TiO2/堇青石催化剂的氮氧化物转化率仍能保持在70%以上,仅下降了5%。BET、XRD、FT-IR和TG表征结果表明,在含硫含水气氛中反应时,CeO2/TiO2/堇青石和V2O5-WO3/TiO2/堇青石催化剂表面均有硫酸铵盐的生成,且前者的生成量明显低于后者。NH3-DRIFT分析结果表明,在含硫含水气氛中两种催化剂表面Brnsted酸性都被增强,而Lewis酸性有所减弱。进一步的XPS分析结果表明,烟气中的SO2+H2O会使催化剂表面Ce4+向Ce3+发生转化,从而导致化学吸附氧含量增加,这是CeO2/TiO2/堇青石催化剂具有优良抗硫抗水性能的重要原因。     

Catalytic Performance of MnO_x-WO_3/TiO_2 Catalyst for Selective Catalytic Reduction of NO_x with NH_3 and Its Tolerance Towards SO_2

The performance of Mn-W/TiO₂ for selective catalytic reduction(SCR) of NO_x with NH₃ and its resistance to different concentrations of SO₂ at various temperatures were investigated. The results show that WO₃ increased the active sites and enhanced the strength of acid, so it was an effective promoter of MnO_x/TiO₂. The NO_x conversion on Mn-W/TiO₂ ranges from 80.3% to 99.6% between 100 °C to 350 °C at GHSV=18900 h^–1, while N₂ product selectivity changes from 100% to 98.7%. In the presence of 0.01% SO₂ and 6% H₂O, NO_x conversion maintained 98.5% at 120 °C. The influence of more than 0.01% SO₂ on the activity of MnO_x-WO₃/TiO₂ will disappear if the temperature rises above 250 °C. By means of heating and sweeping with He, the activity of the catalysts can be recovered. At 300 °C, NO_x conversion yielded 99% with 0.07% SO₂ and reached the level of commercial V-W/TiO₂ catalysts. The Mn-W/TiO₂ catalyst showed excellent performance for SCR of NO_x with NH₃ in a wider range of temperature with strong tolerance to SO₂.     

钛纳米管负载锰催化剂的低温选择性催化还原脱硝性能

采用水热法合成了钛纳米管（TiNT）,以400℃焙烧后得到的TiO₂纳米管为载体,采用浸渍法制备了MnO_x/TiNT催化剂,用于低温NH₃选择性催化还原脱NO反应（SCR）。BET、TEM、XRD及TG测试表明,经过400℃焙烧之后的钛纳米管主要成分为锐钛矿型TiO₂,所制备的催化剂活性组分分散性较好。在模拟烟气条件下,考察了锰负载量、空速、O₂含量、氨氮比及进口NO浓度对MnO_x/TiNT的SCR催化性能的影响。在150℃、\[NH₃\]/\[NO\]比为1.2、O₂浓度为3%、NO浓度为0.06%、空速GHSV为23613.8h^-1、Mn的负载量为5%~15%的条件下,NO的转化率达到95%以上。反应气氛中单独通入水会造成催化剂的活性下降;切断H₂O,催化剂的活性可以恢复至初始水平。温度越高,催化剂抗水性能越好,而且水存在情况下的抗硫性能优于其单独抗硫性能。再次切断H₂O和SO₂,催化剂的活性逐渐上升,但不能恢复到初始水平。     

NO reduction and CO oxidation over Cu/Ce/Mg/Al mixed oxide catalyst in FCC operation

Simultaneous NO reduction and CO oxidation in the presence of O₂, H₂O and SO₂ over Cu/Mg/Al/O (Cu-cat), Ce/Mg/Al/O (Ce-cat) and Cu/Ce/Mg/Al/O (CuCe-cat) were studied. At low temperatures (<340 °C), the presence of O₂ or H₂O enhanced the activity of CuCe-cat for NO and CO conversions, but significantly suppressed the activity of Cu-cat and Ce-cat. At high temperature (720 °C), the presence of O₂ or H₂O had no adverse effect on the NO and CO conversions over these catalysts. The addition of SO₂ to NO+CO+O₂+H₂O system had no effect on the reaction of CO+O₂ over Cu-cat, but deactivated this catalyst for NO+CO and CO+H₂O reactions; over Ce-cat, all of these reactions of NO+CO,CO+O₂ and CO+H₂O were suppressed significantly; over CuCe-cat, NO+CO and CO+O₂ reactions were not affected while the reaction of CO+H₂O was slightly inhibited.     

SCR烟气脱硝对PM2.5排放特性的影响机制研究

采用V₂O₅-WO₃/TiO₂催化剂,对选择性催化还原(SCR)烟气脱硝装置出口PM_2.5物性进行分析,考察SO₂氧化与PM_2.5形成的关系,并采用原位漫反射红外光谱(DRIFTS)对SCR脱硝过程中NH₄HSO₄的生成及SCR脱硝温度条件下的NH₄HSO₄热稳定性进行了分析研究。结果表明,经SCR脱硝后,亚微米级细颗粒数浓度明显升高,且形貌特征及元素组成发生变化,形成的细颗粒主要为NH₄HSO₄及少量(NH₄)₂SO₄;SCR烟气脱硝对PM_2.5排放特性的影响主要通过以下途径:一是SO₃与SCR烟气脱硝系统中的NH₃、H₂O反应形成;二是SO₃与逃逸的NH₃、H₂O在SCR脱硝装置后续系统发生反应形成硫酸氢铵与硫酸铵;此外还与SO₃和烟气中游离的CaO等碱土金属氧化物反应形成硫酸盐,随烟气携带出SCR脱硝装置有关。     

Modelling of calcium sulphate solubility in concentrated multi-component sulphate solutions

The chemistry of several calcium sulphate systems was successfully modelled in multi-component acid-containing sulphate solutions using the mixed solvent electrolyte (MSE) model for calculating the mean activity coefficients of the electrolyte species. The modelling involved the fitting of binary mean activity, heat capacity and solubility data, as well as ternary solubility data. The developed model was shown to accurately predict the solubility of calcium sulphate from 25 to 95 °C in simulated zinc sulphate processing solutions containing MgSO₄, MnSO₄, Fe₂(SO₄)₃, Na₂SO₄, (NH₄)₂SO₄ and H₂SO₄. The addition of H₂SO₄ results in a significant increase in the calcium sulphate solubility compared to that in water. By increasing the acid concentration, gypsum, which is a metastable phase above 40 °C, dehydrates to anhydrite, and the conversion results in a decrease in the solubility of calcium sulphate. In ZnSO₄–H₂SO₄ solutions, it was found that increasing MgSO₄, Na₂SO₄, Fe₂(SO₄)₃ and (NH₄)₂SO₄ concentrations do not have a pronounced effect on the solubility of calcium sulphate. From a practical perspective, the model is valuable tool for assessing calcium sulphate solubilities over abroad temperature range and for dilute to concentrated multi-component solutions.     

Measurements of thermal energy neon ion—neutral reaction rate coefficients and product ion distributions

Reaction rate coefficients and product ion distributions have been measured for the reaction of Ne⁺ with H₂, N₂, CO, CO₂, N₂O, CH₄, O₂, NO, NH₃, SO₂, CH₃Cl, COS, H₂O and C₂H₄ at 300 K using a selected ion flow tube (SIFT) apparatus. In most cases the major reaction channel involves dissociative ionization while for N₂, CO⁺, H₂O, CH₄ and CH₃Cl these reactions proceed mainly or exclusively by simple charge transfer. For H₂ the process is exclusively hydrogen atom abstraction. The measured rate coefficients are compared with the values given by the Langevin and average-dipole orientation theories of ion—molecule collisions. In general the reaction probability (ratio of measured rate to the Langevin or ADO rate) is greater for the dissociative ionizaton reactions, although H₂O is an exception with quite fast simple charge transfer.     

碳化硅负载氧化铜催化剂低温NH3选择性催化还原NOx的性能

采用湿浸渍法制备了碳化硅负载的氧化铜(CuO/SiC)催化剂,采用扫描电镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等对其进行了表征,在模拟烟气条件下研究了该催化剂对低温NH_3选择性催化还原NO_x的性能。结果表明,CuO/SiC还原NO的催化活性与氧化铜含量和反应温度有关。负载质量分数为5%的CuO/SiC催化剂在低温下表现出较高的活性,虽然SO_2对其催化活性略有抑制;研究发现,NO还原反应发生在被吸附的氨与气相的NO或弱吸附的NO之间。所制备的CuO/SiC催化剂为实际的工业应用提供了新的选择。     

不同前驱体制备的SO_4~(2-)/AC催化剂在二甲醚直接氧化合成聚甲氧基二甲醚中的反应性能

分别用硫酸、硫酸铵作为前驱体,活性炭(AC)作为载体,采用浸渍法制备了SO_4~(2-)/AC双功能催化剂(SO_4~(2-)离子和AC载体分别提供催化剂的酸性和氧化还原性),考察了其在二甲醚(DME)直接氧化合成聚甲氧基二甲醚(DMMx)反应中的催化性能。结果表明,不同前驱体制备的SO_4~(2-)/AC催化剂表现出显著的催化活性差异。40%H_2SO_4/AC催化剂具有较好的反应活性,DME转化率为8.4%,DMM1-2的选择性达到59.7%,并且没有COx的生成;而在40%(NH_4)_2SO_4/AC催化剂上,反应主要生成了COx,DMM选择性仅2.7%,且无DMM2生成。XRD、BET、NH_3-TPD及O_2-TPD-MS等表征结果显示,H_2SO_4/AC催化剂中适量的弱酸性位和氧化还原性位有利于DME直接氧化合成DMMx。经过SO_4~(2-)修饰的催化剂促进了O2在活性炭表面的活化;前驱体H_2SO_4的加入提高了催化剂表面的弱酸性位数量,而(NH_4)_2SO_4的引入却促使催化剂表面产生中强酸性位。     

液相共存成分对氨法脱碳吸收液解吸CO2的影响研究

考察了烟气中SO₂、NO_x和CO₂与氨水的反应机理,研究了模拟解吸液解吸过程中主要液相共存成分,如(NH₄)₂SO₃、(NH₄)₂SO₄、NH₄NO₃、NaCl、NH₄Cl和(NH₄)₂CO₃对CO₂解吸的影响.研究表明,不同液相共存成分、质量分数、pH值、表面张力等对CO₂解吸产生一定影响,大部分液相共存成分的存在,会降低脱碳溶液CO₂的解吸量.质量分数低于10％的液相共存组分对脱碳吸收液CO₂解吸过程的制约作用依次为(NH₄)₂SO₃>NH₄NO₃>(NH₄)₂SO₄>NaCl>(NH₄)₂CO₃.因此,在碳捕集前应对烟气中的杂质成分进行脱除,减少其对解吸液理化特性的影响.     

理论空燃比天然气汽车尾气中H2O和O2对CH4与NO反应的影响

共沉淀法制备CeZrYLa+LaAl 复合氧化物载体, 等体积浸渍法制备了Pt 催化剂, 用于研究理论空燃比天然气汽车(NGVs)尾气净化反应中CH₄与NO的反应规律. 并考察了10% (体积分数, φ)H₂O和计量比O₂对CO₂存在时的CH₄+NO反应的影响. 结果表明: 对于不同条件下的NO+CH₄反应, 主要生成N₂和CO₂, 高温区有CO生成. 低温区无O₂时可以生成N₂O, 有O₂时可以生成NO₂; 添加10% (φ)的H₂O后, CH₄ 转化活性降低, NO转化活性基本不变, 这是由于H₂O减弱了CH₄与CO₂的重整反应, 但是对CH₄与NO的反应基本没有影响; 添加计量比的O₂后, CH₄转化活性提高, 而NO转化活性降低, 这是由于O₂和NO之间存在竞争吸附, CH₄被O₂氧化为主要反应, 从而减弱了NO的转化; 同时添加计量比的O₂和10% (φ) H₂O, CH₄与CO₂的重整反应受到抑制,CH₄与NO的反应、甲烷蒸汽重整反应和甲烷被O₂氧化反应同时发生, CH₄和NO的转化活性均提高.     

Three-phase extraction study of cyanex 923-n-heptane/H(2)SO(4) system

Phase behavior of the extraction system, Cyanex 923–heptane/H₂SO₄–H₂O has been studied. The third phase appeared at different aqueous H₂SO₄ concentration with varying initial Cyanex 923 concentration and temperature affects its appearance. Almost all of H₂SO₄ and H₂O are extracted into the middle phase. The H₂SO₄ concentration in the third phase increases with the increasing aqueous acid concentration (C_H2SO4,b) while the water content first increases and then reaches a constant value at C_H2SO4,b=11.3 mol l⁻¹. In the region of C_H2SO4,b higher than 5.2 mol l⁻¹, the composition of the middle phase is only related to the equilibrium concentration of H₂SO₄ in the bottom phase. H₂SO₄ and H₂O are transferred into the middle phase mainly by their coordination with Cyanex 923 when C_H2SO4,b is less than 11.3 mol l⁻¹. When C_H2SO4,b is higher than 11.3 mol l⁻¹, excess H₂SO₄ is solubilized into the polar layer of the aggregates. In the region considered, the extracted complex changes from C923 · H₂SO₄ to C923 · H₂SO₄ · H₂O and then to C923 · (H₂SO₄)₂ · H₂O.