Laminar boundary layer stability on membrane type deformable surfaces

In connection with the successful experiments of Kramer [l, 2] on models sheathed by flexible coverings, attempts have been made to explain theoretically the effect of boundary deformation on the position of the point of stability loss in the boundary layer. Korotkin [3] examined the stability of a plane laminar boundary layer on an elastic surface under the assumption of a linear connection between the pressure perturbation and the normal deformation of the surface. Benjamin [4] and Landahl [5] investigated the stability of the laminar boundary layer on a membrane type surface under the assumption that the physical characteristics of the surface depend on the perturbing flow wavelength. In the following we examine stability of Blasius flow on a membrane type surface whose physical characteristics are constant along the length.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, vol. 10, no. 6, pp. 52–56, November–December, 1969.     

Effect of moving wall on the three-dimensional separation of an incompressible fluid in front of an obstacle

The problem of the laminar boundary layer formed on the surface of a semiinfinite plate with a perpendicular semi-infinite circular cylinder in a uniform steady incompressible flow normal to the leading edge is considered. Near its sharp edge the plate has a stationary part and, located at a finite distance further downstream, a part of the surface moving downstream at a constant velocity. The first-order boundary layer equations are solved numerically by an implicit finite-difference method. The effect of the moving wall on the variation of the dimensions of the separation zone ahead of the obstacle over a broad range of the governing parameters and flow characteristics is investigated. The flow in the laminar boundary layer on the surface of a plate ahead of such an obstacle was calculated in [1, 2] without motion of the wall. Data on the structure of the separated flow are given in [3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 49–53, November–December, 1990.     

Effect of surface temperature on the stability of the swept attachment line boundary layer

At fairly high Reynolds numbers instability may develop on the line of attachment of the potential flow to the leading edge of a swept wing and lead to a transition to boundary layer turbulence directly at the leading edge [1, 2]. Although the first results relating to the stability and transition of laminar flow at the leading edge of swept wings were obtained almost 30 years ago, the problem remains topical. The stability of the swept attachment line boundary layer was recently investigated numerically with allowance for compressibility effects [3, 4]. Below we examine the effect of surface temperature on the stability characteristics of the laminar viscous heat-conducting gas flow at the leading edge of a side slipping wing.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 78–82, November–December, 1990.     

Stability of a laminar boundary layer of a power-law no n-newtonian liquid

The stability of a laminar boundary layer of a power-law non-Newtonian fluid is studied. The validity of the Squire theorem on the possibility of reducing the flow stability problem for a power-law fluid relative to three-dimensional disturbances to a problem with two-dimensional disturbances is demonstrated. A numerical method of integrating the generalized Orr-Sommerfeld equation is constructed on the basis of previously proposed [1] transformations. Stability characteristics of the boundary layer on a longitudinally streamlined semiinfinite plate are considered.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 101–106, January–February, 1976.     

Laminar boundary layer with uniform suction on flat plate in oscillating flow

We examine unsteady incompressible fluid flow in a laminar boundary layer with uniform suction for longitudinal flow over a flat plate when the external stream is a flow with constant velocity, on which there is superposed a sinusoidal disturbance convected by the stream, analogous to [1]. We study the stability of such flow in the boundary layer.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, Vol. 11, No. 3, pp. 66–70, May–June, 1970.     

Boundary layer laminarization on a thermally insulated surface with energy supply to the flow

A subsonic stream of gas flowing over a thermally insulated plate and having an elevated temperature in a thin layer adjacent to the surface is considered. This temperature distribution in the flow can be obtained by providing a volume energy supply near the leading edge of the plate. The results of calculating the position of the line of laminar-turbulent transition on the basis of linear stability theory and the e^N method are presented. It is shown that the presence of a heated layer of gas near the surface of the plate leads to an increase in the stability of the laminar flow and an extension of the laminar interval of the boundary layer. A nonmonotonic dependence of the length of the laminar interval on the thickness of the heated layer of gas is detected. Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 58–61, September–October, 1988.     

Structure of the disturbed boundary layer near a cold surface

A study is made of a laminar boundary layer near a cold plate in the regime of weak viscous -inviscid interaction in the limit in which the free-stream Mach number tends to infinity and the temperature factor to zero. Local disturbed flow regions formed due to the presence of small elements of roughness on the surface of the plate are investigated. It is found that thick regions of roughness elements induce disturbances of the frictional stresses and the heat flux of the same order as these quantities in the undisturbed boundary layer, while all thin regions of roughness elements induce only small, linear perturbations and, therefore, cannot cause separation of the boundary layer; the different regimes of flow past the roughness elements are described.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 19–27, January–February, 1991.     

Two-phase couette flow

A study is made of plane laminar Couette flow, in which foreign particles are injected through the upper boundary. The effect of the particles on friction and heat transfer is analyzed on the basis of the equations of two-fluid theory. A two-phase boundary layer on a plate has been considered in [1, 2] with the effect of the particles on the gas flow field neglected. A solution has been obtained in [3] for a laminar boundary layer on a plate with allowance for the dynamic and thermal effects of the particles on the gas parameters. There are also solutions for the case of the impulsive motion of a plate in a two-phase medium [4–6], and local rotation of the particles is taken into account in [5, 6]. The simplest model accounting for the effect of the particles on friction and heat transfer for the general case, when the particles are not in equilibrium with the gas at the outer edge of the boundary layer, is Couette flow. This type of flow with particle injection and a fixed surface has been considered in [7] under the assumptions of constant gas viscosity and the simplest drag and heat-transfer law. A solution for an accelerated Couette flow without particle injection and with a wall has been obtained in [6]. In the present paper fairly general assumptions are used to obtain a numerical solution of the problem of two-phase Couette flow with particle injection, and simple formulas useful for estimating the effect of the particles on friction and heat transfer are also obtained.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 42–46, May–June, 1976.     

Laminar boundary layer stability and delayed transition on a nonisothermal surface

The effect of a nonuniform surface temperature distribution on the boundary layer stability characteristics is further investigated. It is shown that the presence of fairly extensive areas of the surface within which the temperature of the body exceeds the free-stream temperature leads to the destabilization of the flow and the appearance of a local closed region of laminar flow instability.Paper presented at the Sixth All-Union Conference on Theoretical and Applied Mechanics (Tashkent, 1986). The results of references [8, 9], published after the conference, have been taken into account.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 52–57, March–April, 1989.     

Stability of the boundary layer of a non-Newtonian liquid obeying a power-type rheological law

The stability of the stationary (steady-state) laminar boundary layer of a non-Newtonian liquid obeying a power-type rheological law at a semiinfinite plate situated in a longitudinal flow is analyzed. An approximate formula is derived for estimating the minimum Reynolds number at which the flow loses stability with respect to slight two-dimensional perturbations. Calculations of the point of stability loss for aqueous solutions of carboxyl methyl cellulose are presented.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 121–124, March–April, 1971.     

Stability of two-dimensional flow near a stagnation point in the presence of massive blowing

In the framework of linear theory, a study is made of the stability of laminar flow in the boundary layer on a flat porous plate near a stagnation point in the presence of massive blowing. The problem is solved in the inviscid approximation. The neutral curves are calculated, and the values of the critical parameters and the position of the point at which stability is lost are determined. It is found that the extension of the region of laminar flow is directly proportional to the blowing velocity.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 157–158, March–April, 1982.     

Stability of subsonic laminar boundary layer on a flat plate with volume energy supply

Reducing frction drag and delaying the laminar-turbulent transition are topical problems of modern aerodynamics. A series of methods of delaying transition are known: creation of a favorable pressure gradient, boundary layer suction, surface cooling, etc., [1, 2]. Here, the possibility of delaying transition by means of volume heat supply to the boundary layer is considered. For this purpose, a subsonic compressible laminar boundary layer with volume energy supply is subjected to a stability analysis. The nonself-similar flow in the boundary layer is determined by means of a finite-difference marching method. The flow stability characteristics are calculated on the basis of the linear theory in the plane-parallel approximation. It is shown that even on a thermally insulated surface volume energy supply to the flow leads to significant flow stabilization and reduced perturbation growth rates.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 62–67, March–April, 1988.     

Flow of a viscous fluid in an annular gap with intensive blowing from the walls

Self-similar solutions are obtained in [1, 2] to the Navier-Stokes equations in gaps with completely porous boundaries and with Reynolds number tending to infinity. Approximate asymptotic solutions are also known for the Navier-Stokes equations for plane and annular gaps in the neighborhood of the line of spreading of the flow [3, 4]. A number of authors [5–8] have discovered and studied the effect of increase in the stability of a laminar flow regime in channels of the type considered and a significant increase in the Reynolds number of the transition from the laminar regime to the turbulent in comparison with the flow in a pipe with impermeable walls. In the present study a numerical solution is given to the system of Navier-Stokes equations for plane and annular gaps with a single porous boundary in the neighborhood of the line of spreading of the flow on a section in which the values of the local Reynolds number definitely do not exceed the critical values [5–8]. Generalized dependences are obtained for the coefficients of friction and heat transfer on the impermeable boundary. A comparison is made between the solutions so obtained and the exact solutions to the boundary layer equations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 21–24, January–February, 1987.     

Boundary layer in the vicinity of the stagnation point of a body of axial symmetry in a turbulent stream

The flow in the boundary layer in the vicinity of the stagnation point of a flat plate is examined. The outer stream consists of turbulent flow of the jet type, directed normally to the plate. Assumptions concerning the connection between the pulsations in velocity and temperature in the boundary layer and the average parameters chosen on the basis of experimental data made it possible to obtain an isomorphic solution of the boundary layer equations. Equations are obtained for the friction and heat transfer at the wall in the region of gradient flow taking into account the effect of the turbulence of the impinging stream. It is shown that the friction at the wall is insensitive to the turbulence of the impinging stream, while the heat transfer is significantly increased with an increase in the pulsations of the outer flow. These properties are confirmed by the results of experimental studies [1–4].Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 5, pp. 83–87, September–October, 1973.     

The coefficient of regeneration of the enthalpy in a three-dimensional laminar boundary layer

Self-similar solutions of the equations of a three-dimensional laminar boundary layer are of interest from two points of view. In the first place, they can be used to construct approximate calculating methods, making it possible to analyze several variants and to consider complex flows, in which it is impossible to neglect the interaction between the boundary layer and the external flow (for example, in the region of hypersonic interaction [1–3]). In the second place, the analysis of self-similar solutions permits clarifying the effect of individual parameters on one or another characteristic of the boundary layer and representing this effect in predictable form. One of the principal characteristics of a three-dimensional boundary layer, as also of a two-dimensional, is the coefficient of regeneration of the enthalpy. The value of this coefficient is needed for determining the temperature of a thermally insulated surface, as well as for finiing the real temperature (or enthalpy) head, which determines the value of the heat flux from a heated gas to the surface of the body around which the flow takes place. The article presents the results of calculations of the coefficient of regeneration of the enthalpy for locally self-similar solutions of the equations of a three-dimensional boundary layer, forming with flow around a cylindrical thermally insulated surface at an angle. It is clarified that the dependence of the coefficient of regeneration of the enthalpy on the determining parameters is not always continuous.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 60–63, January–February, 1973.     

Stability of a nonisothermal boundary layer in the presence of periodic perturbations of the exterior flow velocity

The stability of a laminar boundary layer in the presence of high-frequency time-periodic perturbations of the exterior flow velocity, in particular, acoustic vibrations, is investigated in a series of papers which are reviewed in detail in monograph [1]. The mechanisms by which such perturbations influence the stability and transition to the turbulent flow regime can vary. For example, they can lead to the deformation of the averaged field of the basic flow. However, there was good reason not to discuss the effect of this type of perturbation earlier, as it was considered that the change in the basic flow was very small even for perturbations of great amplitude. The aim of the present paper is to demonstrate how perturbations or pulsations in the exterior flow velocity can, by changing the basic flow, have a strong influence on the stability of the laminar boundary layer of a gas under appreciably nonisothermal conditions. Examples of calculations that support this assertion are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 183–186, September–October, 1984.The authors wish to thank A. A. Maslov for his help with the calculations.     

Estimation of the acoustic emission spectrum of a boundary layer on a rough surface

Under engineering conditions the surfaces over which fluids flow are not usually hydraulically smooth. In this connection it is important to investigate the generation of sound by a turbulent boundary layer on a rough surface. Turbulent flow over a deformed surface creates dipole sources of sound, which may considerably increase the acoustic emission as compared with the quadrupole emission from a boundary layer on a smooth plate [1, 2]. In the case of sandy roughness estimates of the acoustic field are usually based on the energy summation of the fields generated by flow over the individual roughness elements [3, 4]. In this case not easily verifiable assumptions are made concerning the nature of the turbulent flow near the roughness, and the intensity of the emission is found correct to a constant factor subject to experimental determination. In the present study, in order to calculate the acoustic emission of a boundary layer on a surface with sandy roughness, it is proposed to employ the available experimental data on the cross of the surface pressure.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 20–26, September–October, 1985.     

Calculation of the boundary layer of a transparent gas on a radiating surface

Heat transfer in the laminar boundary layer of a transparent gas flowing aroud a plane radiating surface is studied. Radiative heat-transfer processes in gases may be divided into two main groups. The first involves heat transfer in absorbing and radiating media. In this case, the effect of radiation lies in the introduction of new terms into the energy equation, representing internal heat sources and sinks. The second group embraces heat-transfer processes in a transparent gas when the effect of radiation on convection expresses itself solely by way of the boundary conditions. Here we study a case of practical importance belonging to the second group: heat transfer in the laminary boundary layer of a transparent gas flowing around a flat plate with the thermal flux q_w specified on its surface.Novosibirsk. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 107–110, January–February, 1972.     

Stability of laminar boundary layer on an elastic surface in an incompressible fluid

Interest in the present problem arose after the publication of the results of the experiments of Kramer [1–3]. In addition to the studies indicated in [4], the articles [5–8] are devoted to the question of the interaction of a flexible elastic surface with the boundary layer. In the present paper the problem of the interaction of an elastic surface with disturbances arising in the boundary layer is posed as in [4]. The approximate nature of the methods of solving the problem of the hydrodynamic stability of the laminar boundary layer leads to a difference in the final computational formulas even in the case when authors use the same Heisenberg-Tollmien-Schlichting-Lin scheme. Therefore, in what follows we present a comparison of the data on the stability of the boundary layer on a solid wall obtained by several authors with the calculations using the formulas, which are then generalized to the case of the elastic surface.The author wishes to thank G. I. Petrov and V. A. Medvedev for discussions of the present study.     

Method of mean-mass parameters for a three-dimensional boundary layer in a flow with vorticity

When a gas flows with hypersonic velocity over a slender blunt body, the bow shock induces large entropy gradients and vorticity near the wall in the disturbed flow region (in the high-entropy layer) [1]. The boundary layer on the body develops in an essentially inhomogeneous inviscid flow, so that it is necessary to take into account the difference between the values of the gas parameters on the outer edge of the boundary layer and their values on the wall in the inviscid flow. This vortex interaction is usually accompanied by a growth in the frictional stress and heat flux at the wall [2, 3]. In three-dimensional flows in which the spreading of the gas on the windward sections of the body causes the high-entropy layer to become narrower, the vortex interaction can be expected to be particularly important. The first investigations in this direction [4–6] studied the attachment lines of a three-dimensional boundary layer. The method proposed in the present paper for calculating the heat transfer generalizes the approach realized in [5] for the attachment lines and makes it possible to take into account this effect on the complete surface of a blunt body for three-dimensional laminar, transition, or turbulent flow regime in the boundary layer.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 80–87, January–February, 1981.