催化动力学光度法测定新鲜果蔬中痕量亚硝酸根

基于在稀磷酸介质中亚硝酸根对溴酸钾氧化百里酚蓝褪色反应的催化效应 ,建立了一种测定痕量亚硝酸根的催化光度法。该方法测定亚硝酸根的线性范围为 0～ 6 .5 μg/ 2 5ml,灵敏度为 0 .6 7ng·ml- 1。用于新鲜果蔬样品中痕量亚硝酸根的测定 ,结果满意     

溴酸钾氧化茜素绿催化光度法测定痕量亚硝酸根

基于酸性介质溴酸钾氧化茜紊绿反应,提出了测定痕量亚硝酸根新的催化光度法.本法的Sandell灵敏度为9.4×10~(-5)μg/cm~2亚硝酸态氮,测定亚硝酸根量的线性范围为0.01～0.12μg/ml,可用于水样中亚硝酸根测定。     

新催化动力学光度法测定痕量亚硝酸根

在磷酸介质中,痕量亚硝酸根对溴酸钾氧化酰胺黑10B的催化褪色作用,建立了催化动力学光度法测定痕量亚硝酸根的新方法。并探讨了动力学反应条件,方法的线性范围为0.05～1.2μg/10ml,检出限为4.88×10-9·ml-1,用于地面水及雨水中亚硝酸根的测定,结果满意。     

催化动力学电位法测定痕量亚硝酸根

基于稀硫酸介质中，亚硝酸根对溴酸钾氧化碘化钾有催化作用，用碘离子选择电跟踪I^-，建立了测定痕量亚硝酸根的催化动力学电位法。在适宜条件下，该指示反应为一级反应，反应速度可用电位的变化（ΔE）表示。当时间固定时，ΔE与亚硝酸根浓度在0－0．12mg/L范围内呈线性关系，检出限为2．0μg/L。该法用于水样中痕量亚硝酸根的测定，结果满意。     

测定亚硝酸根的新指示反应研究-氯酸钾-考马斯亮蓝G体系

基于稀盐酸介质中氯酸钾氧化考马斯亮蓝G的反应,提出了测定痕量亚硝酸根的新催化光度法.方法检出限为2.4×10～(-8)g/mL,线性范围为0.08～0.48μg/mL,用于唾液和硝酸钾中亚硝酸根测定.     

氯酸钾-灿烂甲酚蓝催化褪色光度法测定痕量亚硝酸根的研究

在0.1 mol/L硫酸介质中,亚硝酸根对KClO3氧化灿烂甲酚蓝的褪色反应具有明显的催化作用,据此建立了催化光度分析测定痕量亚硝酸根的新方法.研究了反应的适宜条件及动力学参数.在最大吸收波长630 nm及选择的最佳实验条件下,方法线性范围为0.05～0.4μg/mL,检出限为0.014μg/mL.该法直接用于雨水和湖水中痕量亚硝酸根的测定,结果满意.     

催化光度法测定痕量亚硝酸根

基于稀磷酸介质中亚硝酸根催化溴酸钾氧化溴酚红的褪色反应,建立测定痕量亚硝酸根的新方法。方法检出限为0.58×10-6g/L,线性范围为0.5×10-6~20×10-6g/L,回收率为96%~104%。该法已用于食品中亚硝酸根的测定,结果满意。     

双波长催化光度法测定痕量亚硝酸根

研究了在稀硫酸介质中,痕量亚硝酸根对溴酸钾氧化溴甲酚绿和甲酚红褪色的指示反应,通过测量440 nm和520 nm波长处催化反应体系和非催化反应体系吸光度的变化,建立了双波长双指示剂催化动力学光度法测定痕量亚硝酸根的新方法。在最佳实验条件下,亚硝酸根的浓度在0.008~0.120μg/mL之间与吸光度存在线性关系(r=0.9968),方法检出限为0.0022μg/mL。该方法简单,灵敏度高,选择性好,用于实际样品中痕量亚硝酸根的测定,获得满意结果。     

新体系催化动力学光度法测定痕量亚硝酸根

基于增敏剂吐温 - 80存在下亚硝酸根催化过氧化氢氧化中性红的反应 ,建立了测定痕量亚硝酸根的新催化动力学光度法。方法的灵敏度较常规方法提高了 2 .2倍 ,测定的线性范围为 2～ 1 0 μg/L,检出限为 2 .7× 1 0 - 10 g/m L。已用于测定水样中 NO2 - 的含量     

溴酸钾氧化荧光素动力学荧光法测定痕量亚硝酸根

基于稀硫酸介质中,亚硝酸根催化溴酸钾氧化荧光素,建立了动力学荧光法测定痕量亚硝酸根的新方法。本方法具有高灵敏度和高选择性,测定亚硝酸根的线性范围为2～80ng/ml,可用于直接测定水样中亚硝酸根。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.