A reoptimized GROMOS force field for hexopyranose-based carbohydrates accounting for the relative free energies of ring conformers, anomers, epimers, hydroxymethyl rotamers, and glycosidic linkage conformers

This article presents a reoptimization of the GROMOS 53A6 force field for hexopyranose-based carbohydrates (nearly equivalent to 45A4 for pure carbohydrate systems) into a new version 56A(CARBO) (nearly equivalent to 53A6 for non-carbohydrate systems). This reoptimization was found necessary to repair a number of shortcomings of the 53A6 (45A4) parameter set and to extend the scope of the force field to properties that had not been included previously into the parameterization procedure. The new 56A(CARBO) force field is characterized by: (i) the formulation of systematic build-up rules for the automatic generation of force-field topologies over a large class of compounds including (but not restricted to) unfunctionalized polyhexopyranoses with arbritrary connectivities; (ii) the systematic use of enhanced sampling methods for inclusion of experimental thermodynamic data concerning slow or unphysical processes into the parameterization procedure; and (iii) an extensive validation against available experimental data in solution and, to a limited extent, theoretical (quantum-mechanical) data in the gas phase. At present, the 56A(CARBO) force field is restricted to compounds of the elements C, O, and H presenting single bonds only, no oxygen functions other than alcohol, ether, hemiacetal, or acetal, and no cyclic segments other than six-membered rings (separated by at least one intermediate atom). After calibration, this force field is shown to reproduce well the relative free energies of ring conformers, anomers, epimers, hydroxymethyl rotamers, and glycosidic linkage conformers. As a result, the 56A(CARBO) force field should be suitable for: (i) the characterization of the dynamics of pyranose ring conformational transitions (in simulations on the microsecond timescale); (ii) the investigation of systems where alternative ring conformations become significantly populated; (iii) the investigation of anomerization or epimerization in terms of free-energy differences; and (iv) the design of simulation approaches accelerating the anomerization process along an unphysical pathway.     

Reversible peptide folding: Dependence on molecular force field used

Temperature‐dependent nuclear magnetic resonance (NMR) and CD spectra of methanol solutions of a β‐heptapeptide have been interpreted in such a way that the secondary structure, a 3₁₄‐helix, is assumed to be stable in a temperature range of between 298 and 393 K. This is in contrast to the results of a 50‐ns molecular dynamics simulation using the GROMOS 96 force field, which found a melting temperature of about 340 K. This discrepancy is addressed by further computational studies using the OPLS‐AA force field. The conformational energetics of N‐formyl‐3‐aminobutanamide in vacuo are obtained using ab initio and density functional quantum‐mechanical calculations at the HF/6‐31G*, B3LYP/6‐31G*, and B3LYP/6‐311+G* levels of theory. The results permit development of torsional parameters for the OPLS‐AA force field that reproduce the conformational energetics of the monomer. By varying the development procedure, three parameter sets are obtained that focus on reproducing either low‐energy or high‐energy conformations. These parameter sets are tested by simulating the reversible folding of the β‐heptapeptide in methanol. The melting temperature of the helix formed (>360 K) is found to be higher than the one obtained from simulations using the GROMOS 96 force field (∼340 K). Differences in the potential energy functions of the latter two force fields are evaluated and point to the origins of the difference in stability. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 774–787, 2000     

Force field evaluation for biomolecular simulation: free enthalpies of solvation of polar and apolar compounds in various solvents.

Recently, the GROMOS biomolecular force field parameter set 53A6--which has been parametrized to reproduce experimentally determined free enthalpies of hydration and solvation in cyclohexane of amino acid side-chain analogs--was presented. To investigate the transferability of the new parameter set, we calculated free enthalpies of solvation of a range of polar and apolar compounds in different solvents (methanol, dimethyl sulfoxide (DMSO), acetonitrile, and acetone) from molecular dynamics simulations using the GROMOS 53A6 force field. For methanol and DMSO, parameters were used that are available in the 53A6 parameter set. For acetonitrile, a recently developed model was taken and for acetone, two models available in literature were used. We found that trends in and values for the solvation free enthalpies are in satisfactory agreement with experiment, except for the solvation in acetone for which deviations from experiment can be explained in terms of the properties of the models used.     

Molecular mechanics force-field parameterization procedures

A set of procedures and guidelines are presented for the estimation of bond length, bond angle, and torsional potential constants for molecular mechanics force fields. The force field constants are ultimately derived by “subtracting” nonbonded molecular mechanics energies from corresponding molecular orbital energies using a model compound containing the chemical structure to be parameterized. Case study examples of bond length, bond angle, and torsional rotation force field parameterizations are presented. A general discussion of molecular mechanics force field parameterization strategy is included for reference and completeness. Finally, a curve-fitting program to generate force field parameters from raw data is given in Appendix I.     

Development of the force field parameters for phosphoimidazole and phosphohistidine

Phosphorylation of histidine-containing proteins is a key step in the mechanism of many phosphate transfer enzymes (kinases, phosphatases) and is the first stage in a wide variety of signal transduction cascades in bacteria, yeast, higher plants, and mammals. Studies of structural and dynamical aspects of such enzymes in the phosphorylated intermediate states are important for understanding the intimate molecular mechanisms of their functioning. Such information may be obtained via molecular dynamics and/or docking simulations, but in this case appropriate force field parameters for phosphohistidine should be explicitly defined. In the present article we describe development of the GROMOS96 force field parameters for phosphoimidazole molecule--a realistic model of the phosphohistidine side chain. The parameterization is based on the results of ab initio quantum chemical calculations with subsequent refinement and testing using molecular mechanics and molecular dynamics simulations. The set of force constants and equilibrium geometry is employed to derive force field for the phosphohistidine moiety. Resulting parameters and topology are incorporated into the molecular modeling package GROMACS and used in molecular dynamics simulations of a phosphohistidine-containing protein in explicit solvent.     

Update on phosphate and charged post‐translationally modified amino acid parameters in the GROMOS force field

In this study, we propose newly derived parameters for phosphate ions in the context of the GROMOS force field parameter sets. The non‐bonded parameters used up to now lead to a hydration free energy, which renders the dihydrogen phosphate ion too hydrophobic when compared to experimentally derived values, making a reparametrization of the phosphate moiety necessary. Phosphate species are of great importance in biomolecular simulations not only because of their crucial role in the backbone of nucleic acids but also as they represent one of the most important types of post‐translational modifications to protein side‐chains and are an integral part in many lipids. Our re‐parametrization of the free dihydrogen phosphate (H PO ) and three derivatives (methyl phosphate, dimethyl phosphate, and phenyl phosphate) leads, in conjunction with the previously updated charged side‐chains in the GROMOS parameter set 54A8, to new nucleic acid backbone parameters and a 54A8 version of the widely used GROMOS protein post‐translational modification parameter set. © 2017 Wiley Periodicals, Inc.     

A molecular dynamics study of the thermal response of crystalline cellulose Iβ

Molecular dynamics simulations were performed to better understand the atomic details of thermal induced transitions in cellulose Iβ. The latest version of the GLYCAM force field series (GLYCAM06) was used for the simulations. The unit cell parameters, density, torsion angles and hydrogen-bonding network of the crystalline polymer were carefully analyzed. The simulated data were validated against the experimental results obtained by X-ray diffraction for the crystal structure of cellulose Iβ at room and high temperatures, as well as against the temperature-dependent IR measurements describing the variation of hydrogen bonding patterns. Distinct low and high temperature structures were identified, with a phase transition temperature of 475–500 K. In the high-temperature structure, all the origin chains rotated around the helix axis by about 30° and the conformation of all hydroxymethyl groups changed from tg to either gt on origin chains or gg on center chains. The hydrogen-bonding network was reorganized along with the phase transition. Compared to the previously employed GROMOS 45a4 force field, GLYCAM06 yields data in much better agreement with experimental observations, which reflects that a cautious parameterization of the nonbonded interaction terms in a force field is critical for the correct prediction of the thermal response in cellulose crystals.     

Derivation of class II force fields. VIII. Derivation of a general quantum mechanical force field for organic compounds

A class II valence force field covering a broad range of organic molecules has been derived employing ab initio quantum mechanical "observables." The procedure includes selecting representative molecules and molecular structures, and systematically sampling their energy surfaces as described by energies and energy first and second derivatives with respect to molecular deformations. In this article the procedure for fitting the force field parameters to these energies and energy derivatives is briefly reviewed. The application of the methodology to the derivation of a class II quantum mechanical force field (QMFF) for 32 organic functional groups is then described. A training set of 400 molecules spanning the 32 functional groups was used to parameterize the force field. The molecular families comprising the functional groups and, within each family, the torsional angles used to sample different conformers, are described. The number of stationary points (equilibria and transition states) for these molecules is given for each functional group. This set contains 1324 stationary structures, with 718 minimum energy structures and 606 transition states. The quality of the fit to the quantum data is gauged based on the deviations between the ab initio and force field energies and energy derivatives. The accuracy with which the QMFF reproduces the ab initio molecular bond lengths, bond angles, torsional angles, vibrational frequencies, and conformational energies is then given for each functional group. Consistently good accuracy is found for these computed properties for the various types of molecules. This demonstrates that the methodology is broadly applicable for the derivation of force field parameters across widely differing types of molecular structures. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1782-1800, 2001     

An improved GROMOS96 force field for aliphatic hydrocarbons in the condensed phase

Over the past 4 years the GROMOS96 force field has been successfully used in biomolecular simulations, for example in peptide folding studies and detailed protein investigations, but no applications to lipid systems have been published yet. Here we provide a detailed investigation of aliphatic liquid systems. For liquids of larger aliphatic chains, n‐heptane and longer, the standard GROMOS96 parameter sets 43A1 and 43A2 yield a too low pressure at the experimental density. Therefore, a reparametrization of the GROMOS96 force field regarding aliphatic carbons was initiated. The new force field parameter set 45A3 shows considerable improvements for n‐alkanes, cyclo‐, iso‐, and neoalkanes and other branched aliphatics. Liquid densities and heat of vaporization are reproduced for almost all of these molecules. Excellent agreement is found with experiment for the free energy of hydration for alkanes. The GROMOS96 45A3 parameter set should, therefore, be suitable for application to lipid aggregates such as membranes and micelles, for mixed systems of aliphatics with or without water, for polymers, and other apolar systems that may interact with different biomolecules. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1205–1218, 2001     

A new force field (ECEPP-05) for peptides, proteins, and organic molecules

Parametrization and testing of a new all-atom force field for organic molecules and peptides with fixed bond lengths and bond angles are described. The van der Waals parameters for both the organic molecules and the peptides were taken from J. Phys. Chem. B 2003, 107, 7143 and J. Phys. Chem. B 2004, 108, 12181. First, the values of the 1-4 nonbonded and electrostatic scale factors appropriate to the new force field were determined by computing the conformational energies of six model molecules, namely, ethanol, ethylamine, propanol, propylamine, 1,2-ethanediol, and 1,3-propanediol with different values of these factors. The partial atomic charges of these molecules were obtained by fitting to the electrostatic potentials calculated with the HF/6-31G quantum-mechanical method. Two different charge models (single- and multiple-conformation-derived) were also considered. We demonstrated that the charge model has a stronger effect on the conformational energies than the 1-4 scaling. The choice of a charge model affected the conformational energies of even the smallest molecules considered, whereas the effect of the 1-4 electrostatic or nonbonded scaling was apparent only for 1,3-propanediol. The best agreement with high-level ab initio data was obtained with the multiple-conformation-derived charges and with no scaling of the 1-4 nonbonded or electrostatic interactions (scale factors of 1.0). Next, the torsional parameters of a large number of neutral and charged organic molecules, assumed to be models of the side chains of the 20 naturally occurring amino acids, were computed by fitting to rotational energy profiles obtained from ab initio MP2/6-31G calculations. The quality of the fits was high with average errors for torsional profiles of less than 0.2 kcal/mol. To derive the torsional parameters for the peptide backbone, the partial atomic charges of the 20 neutral and charged amino acids were obtained by fitting to the electrostatic potentials of terminally blocked amino acids using the HF/6-31G quantum-mechanical method. Then, the phi-psi energy maps of Ac-Ala-NMe and Ac-Gly-NMe were computed using MP2/6-31G//HF/6-31G quantum-mechanical methods. The phi-psi energy map of Ac-Ala-NMe was used for refinement of the nonbonded parameters for the backbone nitrogen and hydrogen bonded to it. Subsequently, the main-chain torsional parameters were obtained by fitting the molecular mechanics energies to the phi-psi energy maps of Ac-Ala-NMe and Ac-Gly-NMe. The transferability of the entire force field was demonstrated by reproducing the main energy minima of terminally blocked Ala3 from the literature. The performance of the force field was also evaluated by simulating crystal structures of small peptides. By comparison of simulated and experimental data, examination of the torsional-angle and atom-positional root-mean-square deviations of the energy-minimized crystal structures from the corresponding X-ray model structures demonstrated high accuracy of the force field.     

Free energies of hydration from thermodynamic integration: Comparison of molecular mechanics force fields and evaluation of calculation accuracy

Four commonly used molecular mechanics force fields, CHARMM22, OPLS, CVFF, and GROMOS87, are compared for their ability to reproduce experimental free energies of hydration (ΔG_hydr) from molecular dynamics (MD) simulations for a set of small nonpolar and polar organic molecules: propane, cyclopropane, dimethylether, and acetone. ΔG_hydr values were calculated by multiconfiguration thermodynamic integration for each of the different force fields with three different sets of partial atomic charges: full charges from an electrostatic potential fit (ESP), and ESP charges scaled by 0.8 and 0.6. All force fields, except for GROMOS87, give reasonable results for ΔG_hydr · if partial atomic charges of appropriate magnitude are assigned. For GROMOS87, the agreement with experiment for hydrocarbons (propane and ethane) was improved considerably by modifying the repulsive part of the carbon-water oxygen Lennard-Jones potential. The small molecules studied are related to the chemical moieties constituting camphor (C₁₀H_l6O). By invoking force-field transferability, we calculated the ΔG_hydr for camphor. With the modified GROMOS force field, a ΔG_hydr within 4 kJ/mol of the experimental value of −14.8 kJ/mol was obtained. Camphor is one of the largest molecules for which an absolute hydration free energy has been calculated by molecular simulation. The accuracy and reliability of the thermodynamic integration calculations were analyzed in detail and we found that, for ΔG_hydr calculations for the set of small molecules in aqueous solution, molecular dynamics simulations of 0.8–1.0 ns in length give an upper statistical error bound of 1.5 kJ/mol, whereas shorter simulations of 0.25 nm in length given an upper statistical error bound of 3.5 kJ/mol. © 1997 by John Wiley & Sons, Inc.     

Controlling the shape and flexibility of arylamides: a combined ab initio, ab initio molecular dynamics, and classical molecular dynamics study

Using quantum chemistry plus ab initio molecular dynamics and classical molecular dynamics methods, we address the relationship between molecular conformation and the biomedical function of arylamide polymers. Specifically, we have developed new torsional parameters for a class of these polymers and applied them in a study of the interaction between a representative arylamide and one of its biomedical targets, the anticoagulant drug heparin. Our main finding is that the torsional barrier of a C(aromatic)-C(carbonyl) bond increases significantly upon addition of an o-OCH2CH2NH3+ substituent on the benzene ring. Our molecular dynamics studies that are based on the original general AMBER force field (GAFF) and GAFF modified to include our newly developed torsional parameters show that the binding mechanism between the arylamide and heparin is very sensitive to the choice of torsional potentials. Ab initio molecular dynamics simulation of the arylamide independently confirms the degree of flexibility we obtain by classical molecular dynamics when newly developed torsional potentials are used.     

Practical considerations for building GROMOS-compatible small-molecule topologies

Molecular dynamics simulations are being applied to increasingly complex systems, including those involving small endogenous compounds and drug molecules. In order to obtain meaningful and accurate data from these simulations, high-quality topologies for small molecules must be generated in a manner that is consistent with the derivation of the force field applied to the system. Often, force fields are designed for use with macromolecules such as proteins, making their transferability to other species challenging. Investigators are increasingly attracted to automated topology generation programs, although the quality of the resulting topologies remains unknown. Here we assess the applicability of the popular PRODRG server that generates small-molecule topologies for use with the GROMOS family of force fields. We find that PRODRG does not reproduce topologies for even the most well-characterized species in the force field due to inconsistent charges and charge groups. We assessed the effects of PRODRG-derived charges on several systems: pure liquids, amino acids at a hydrophobic-hydrophilic interface, and an enzyme-cofactor complex. We found that partial atomic charges generated by PRODRG are largely incompatible with GROMOS force fields, and the behavior of these systems deviates substantially from that of simulations using GROMOS parameters. We conclude by proposing several points as "best practices" for parametrization of small molecules under the GROMOS force fields.     

A systematic approach to calibrate a transferable polarizable force field parameter set for primary alcohols

In this work, parameters are optimized for a charge‐on‐spring based polarizable force field for linear alcohols. We show that parameter transferability can be obtained using a systematic approach in which the effects of parameter changes on physico‐chemical properties calculated from simulation are predicted. Our previously described QM/MM calculations are used to attribute condensed‐phase polarizabilities, and starting from the non‐polarizable GROMOS 53A5/53A6 parameter set, van der Waals and Coulomb interaction parameters are optimized to reproduce pure‐liquid (thermodynamic, dielectric, and transport) properties, as well as hydration free energies. For a large set of models, which were obtained by combining small perturbations of 10 distinct parameters, values for pure‐liquid properties of the series methanol to butanol were close to experiment. From this large set of models, we selected 34 models without special repulsive van der Waals parameters to distinguish between hydrogen‐bonding and non‐hydrogen‐bonding atom pairs, to make the force field simple and transparent. © 2017 Wiley Periodicals, Inc.     

Comparison of Secondary Structure Formation Using 10 Different Force Fields in Microsecond Molecular Dynamics Simulations

We have compared molecular dynamics (MD) simulations of a β-hairpin forming peptide derived from the protein Nrf2 with 10 biomolecular force fields using trajectories of at least 1 μs. The total simulation time was 37.2 μs. Previous studies have shown that different force fields, water models, simulation methods, and parameters can affect simulation outcomes. The MD simulations were done in explicit solvent with a 16-mer Nrf2 β-hairpin forming peptide using Amber ff99SB-ILDN, Amber ff99SB*-ILDN, Amber ff99SB, Amber ff99SB*, Amber ff03, Amber ff03*, GROMOS96 43a1p, GROMOS96 53a6, CHARMM27, and OPLS-AA/L force fields. The effects of charge-groups, terminal capping, and phosphorylation on the peptide folding were also examined. Despite using identical starting structures and simulation parameters, we observed clear differences among the various force fields and even between replicates using the same force field. Our simulations show that the uncapped peptide folds into a native-like β-hairpin structure at 310 K when Amber ff99SB-ILDN, Amber ff99SB*-ILDN, Amber ff99SB, Amber ff99SB*, Amber ff03, Amber ff03*, GROMOS96 43a1p, or GROMOS96 53a6 were used. The CHARMM27 simulations were able to form native hairpins in some of the elevated temperature simulations, while the OPLS-AA/L simulations did not yield native hairpin structures at any temperatures tested. Simulations that used charge-groups or peptide capping groups were not largely different from their uncapped counterparts with single atom charge-groups. On the other hand, phosphorylation of the threonine residue located at the β-turn significantly affected the hairpin formation. To our knowledge, this is the first study comparing such a large set of force fields with respect to β-hairpin folding. Such a comprehensive comparison will offer useful guidance to others conducting similar types of simulations.