Extraction behaviour of copper(II) and silver(I) with a thiacrown ether carboxylic acid, 2-(3,6,10,13-tetrathiacyclotetradec-1-oxy)hexanoic acid

The extraction behaviour of copper(II) and silver(I) with 2-(3,6,10,13-tetrathiacyclotetradec-1-oxy)hexanoic acid (TTCTOHA) was investigated at 25+/-0.1 degrees C and ionic strength of 0.1. The value of the logarithmic distribution coefficient, logK(DR) of TTCTOHA between octan-1-ol and aqueous phases was determined to be 4.13. Copper(II) was extracted with TTCTOHA into octan-1-ol as CuL(2), where L represents the anionic species of TTCTOHA. The logarithmic extraction constant, logK(ex(10)), was determined at -7.42. Silver(I) was extracted with TTCTOHA into octan-1-ol as AgL and Ag(2)L(2). The logarithmic distribution constant, logK(DC), of AgL was estimated to be 0.49. On the other hand, silver(I) was extracted into 1,2-dichloroethane as AgL and the logarithmic extraction constant, logK(ex(10)), was determined to be -2.24.     

Separation of trace amounts of palladium (II) with crown ether from hydrochloric acid and potassium thiocyanate media

A new method for the separation of trace amounts of palladium from hydrochloric acid and potassium thiocyanate media has been established based on the formation of an ion-pair complex of palladium thiocyanate anion Pd(SCN)4(2-) and the cationic potassium complex of dicyclohexyl- 18-crown-6 (DC18C6) in chloroform. The effect of various factors (solvent, crown ether, potassium thiocyanate, hydrochloric acid, reagent concentration, shaking time, phase volume ratio, composition of the extracted species, foreign ions, etc.) on the extraction and back-extraction of palladium has been investigated. The method can be combined with subsequent FAAS determination of palladium. The procedure was applied to determine palladium traces in chloroplatinic acid and rhodium chloride.     

Separation of rhenium by extraction with crown ethers and flow-injection extraction—spectrophotometric determination with Brilliant Green

The extraction behavior of perrhenate with crown ethers was studied and methods for the separation and determination of rhenium were developed. The distribution ratio of perrhenate with dicyclohexano-18-crown-6 (DC18C6) increases with increases in the dielectric constant of organic solvents and in the potassium ion concentration of aqueous solution. The molar ratios of crown ether to KReO₄ in the extracted species are probably 1:1 for DC18C6, dibenzo-18-crown-6 and 18-crown-6 and 2:1 for benzo-15-crown-5 and 15-crown-5. Microgram amounts of rhenium were satisfactorily separated from large amounts of molbdenum(VI) by extraction with DC18C6 in 1,2-dichloroethane from 2 M potassium hydroxide solution containing tartrate and by back-extraction with sodium phosphate buffer solution after the addition of a twofold volume of hexane to the organic phase. Rhenium was determined by the flow-injection extraction-photometric method with Brilliant Green. Rhenium was satisfactory determined in molybdenite and other ore samples.     

Separation of trace amounts of palladium (II) with crown ether from hydrochloric acid and potassium thiocyanate media

A new method for the separation of trace amounts of palladium from hydrochloric acid and potassium thiocyanate media has been established based on the formation of an ion-pair complex of palladium thiocyanate anion Pd(SCN)₄ ^2– and the cationic potassium complex of dicyclohexyl-18-crown-6 (DC18C6) in chloroform. The effect of various factors (solvent, crown ether, potassium thiocyanate, hydrochloric acid, reagent concentration, shaking time, phase volume ratio, composition of the extracted species, foreign ions, etc.) on the extraction and back-extraction of palladium has been investigated. The method can be combined with subsequent FAAS determination of palladium. The procedure was applied to determine palladium traces in chloroplatinic acid and rhodium chloride.     

Preconcentration and separation of silver from neutron poisons and rare earths using diphenyl-2-pyridylmethane as an extractant

The extraction of silver from aqueous thiocyanate-perchlorate solutions using diphenyl-2-pyridylmethane (DPPM) in benzene has been investigated. The variables such as concentrations of perchloric acid, thiocyanate and DPPM influencing the extraction have been optimized. Maximum extraction has been achieved from 0.01 M perchloric acid solution containing 0.01 M potassium thiocyanate in 0.075 M DPPM in benzene. The extraction was found to be independent of silver concentration in the range from 10^–4–10^–6 M. The influence of several anions on the extraction was examined; only thiosulphate interfered seriously and reduced the extraction below 1%. Thus 0.1M potassium thiosulphate was found to back-extract silver quantitatively in one step. Under selected optimal conditions, very small extraction (<1%) was observed for trivalent Gd, Dy, Ho, Tm, Yb, Lu; Cs(I) and Cd(II) and separation factors for these elements were better than 10³. Only Sn(IV) exhibited quantitative extraction (>99%). This extraction procedure can be used for the preconcentration of silver and tin or their separation from rare earths mentioned above.     

Sorption of traces of silver ions onto polyurethane foam from acidic solution

The sorption of traces of silver ions onto polyurethane foam (PUF) has been investigated in detail. Maximum sorption of silver (K(d)=6109 cm(3) g(-1), %sorption>97.5%) has been achieved from 1 M nitric acid solution after equilibrating silver ions with approximately 29 mg PUF for 20 min. The kinetics and thermodynamics of the sorption of silver ions onto PUF have also been studied. The sorption of silver ions onto PUF follows a first-order rate equation, which results as 0.177 min(-1). The variation of sorption with temperature yields the values of DeltaH=-56.1+/-3.2 kJ mol(-1), DeltaS=-159.7+/-10.5 J mol(-1) K(-1) and DeltaG=-8.68+/-0.09 kJ mol(-1) at 298 K with a correlation factor gamma=0.9919. The sorption data were subjected to different sorption isotherms. The sorption follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The values of Langmuir isotherms Q=65.4+/-1.5 mumol g(-1) and b=(4.79+/-1.16)x10(4) dm(3) mol(-1) have been evaluated for Langmuir sorption constants, whereas the Freundlich sorption isotherm gives the value 1/n=0.12+/-0.02 and A=0.15+/-0.03 mmol g(-1). The D-R parameters computed were beta=-0.000817+/-0.000206 mol(2) kJ(-2), X(m)=76.8+/-8.7 mumol g(-1) and E=24.7+/-3.2 kJ mol(-1). The influence of common ions on the sorption was also examined. It is observed that Hg(II), thiourea, Al(III), thiocyanate and thiosulphate reduce the sorption, whereas Cu(II), citrate and acetate ions enhance the sorption significantly. It can be concluded that PUF may be used to remove traces of silver ions from its very dilute solutions or for its preconcentration from aqueous acidic solutions.     

Extraction of iridium (IV) from hydrochloric acid media with crown ether in chloroform, and its determination by ICP-AES

A new method for the quantitative extraction and determination of trace amounts of iridium from hydrochloric acid media has been established based on the formation of an ion-association complex of iridium hexachloro anion IrCl6(2-) with dicyclohexyl-18-crown-6 (DC18C6) oxonium cation in chloroform, then determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). The effect of various factors (solvent, acid concentration, crown ether, reagent concentration, shaking time, composition of the extracted species, foreign ions, etc.) on the extraction and back-extraction of iridium has been investigated. The procedure was used to determine traces of iridium in palladium chloride and rhodium chloride.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.     

Extraction of uranium from hydrochloric acid solutions by alkylated crown ethers

The extraction recovery of uranium from 1–10 mol/L hydrochloric acid solutions into solutions of alkylated crown ethers di-tert-butyldibenzo-18-crown-6 (DTBDB18C6) and di-tert-butyldicyclohexyl-18-crown-6 (DTBDCH18C6) in organic solvents (nitrobenzene, 1,2-dichloroethane, chloroform, 1-octanol) was studied. It was found that with increasing HCl concentration, the value of the distribution coefficients of uranium (D) between the organic and aqueous phases increased to a maximum value at 9 mol/L HCl for DTBDB18C6 and 6–7 mol/L HCl for DTBDCH18C6. The properties of the solvent also greatly affect the values of D, reaching a maximum in the application of nitrobenzene, dichloroethane, or their mixture. Under these conditions, D for a 0.01 mol/L solution of DTBDCH18C6 in nitrobenzene is 830, which is the highest of known values. It was determined by the slope method and the complete saturation method that the extracted complexes of the studied alkylated crown ethers with uranyl ions have the 2 : 1 composition. Thus, new supramolecular extractants of uranium from hydrochloric acid solutions have been studied, having an extremely high extraction capacity, which can be used in the analytical and preparative chemistry of uranium.     

The determination of thallium(III) with the 2,2'-bipyridyl-iron(II) chelate

A spectrophotometric determination of thallium (III), based on solvent extraction of an ion-association pair formed between the cationic 2,2'-bipyridyl-iron(II) chelate and the anionic thallium(III) bromide complex is described. The best extractant is 1,2-dichloroethane and extraction is possible over the pH range 2.5–6.7. The composition of the extracted species was confirmed, and conditions were established for the extraction over the concentration range 7.9·10^-6–3.5·10^-5M of thallium in aqueous solution.     

Improved tribenzylamine-silver bromide extraction/atomic-absorption spectrophotometric method for the determination of silver in ores, related materials and zinc process solutions

An improved tribenzylamine extraction/atomic-absorption method for the determination of silver in ores, related materials and zinc process solutions is described. The method, which involves the separation of silver by a single methyl isobutyl ketone extraction of the tribenzylamine-silver bromide ion-association complex from ~ 0.5-2M sulphuric acid-0.14M potassium bromide, is simpler and more rapid than a previous method based on a triple chloroform extraction of the complex. Silver is stripped with 12M hydrochloric acid containing 1% thiourea as a complexing agent. Thiourea is destroyed with nitric and perchloric acids and silver is ultimately determined by atomic-absorption spectrophotometry in an air-acetylene flame, at 328.1 nm, in a 10% v v hydrochloric acid-1% v v diethylenetriamine medium. Cadmium and bismuth are partly co-extracted but do not interfere. Results obtained by this method are compared with those obtained previously by the tribenzylamine/chloroform extraction method and with those obtained by a direct acid-decomposition/atomic-absorption method.     

Extraction of iridium(IV) from hydrochloric acid media with crown ether in chloroform, and its determination by ICP–AES

A new method for the quantitative extraction and determination of trace amounts of iridium from hydrochloric acid media has been established based on the formation of an ion-association complex of iridium hexachloro anion IrCl₆ ^2– with dicyclohexyl-18-crown-6 (DC18C6) oxonium cation in chloroform, then determination by inductively coupled plasma atomic emission spectrometry (ICP–AES). The effect of various factors (solvent, acid concentration, crown ether, reagent concentration, shaking time, composition of the extracted species, foreign ions, etc.) on the extraction and back-extraction of iridium has been investigated. The procedure was used to determine traces of iridium in palladium chloride and rhodium chloride.     

Determination of platinum(IV) by UV spectrophotometry

A simple, rapid and sensitive spectrophotometric procedure for the determination of platinum has been elaborated. Pt traces were determined in the form of the PtCl(6)(2-) complex in hydrochloric acid solution whose concentration varies from 0.01 to 2 mol L(-1) by measuring the absorbance at 260 nm. The detection limit is 4.7 x 10(-7) mol L(-1), the linearity range from 2 x 10(-6) mol L(-1) to 7 x 10(-6) mol L(-1), and the correlation coefficient is r=0.9990. No significant interferences were observed from a majority of the investigated ions, such as Zn(II), Pb(II), Mn(II), Cd(II), Co(II) and Ni(II) with the exception of Cu(II), Sb(III), Fe(III), Pd(II), Sn(II) and I(-) ions. The method was successfully applied for the determination of Pt traces in different solid samples and the recovery from inorganic materials was studied.     

Highly selective thiocyanate poly(vinyl chloride) membrane electrode based on a cadmium-Schiff's base complex

A PVC membrane electrode based on a cadmium-salen (N,N'-bis-salicylidene-1,2-ethylenediamine) complex as an anion carrier is described. The electrode has an anti-Hofmeister selectivity sequence with a preference for thiocyanate at pH 1.5-11.0. It has a linear response to thiocyanate from 1.0 x 10(-6) to 1.0 x 10(-1) mol L(-1) with a slope of 59.1 +/- 0.2 mV per decade, and a detection limit of 7 x 10(-7) mol L(-1). This electrode has high selectivity for thiocyanate relative to many common organic and inorganic anions. The proposed sensor has a fast response time of approximately 15 s. It was applied to the determination of thiocyanate in a milk sample.     

Evaluation of the Hydrophilic Property of Sodium Ion-pair Complexes with 3m-Crown-m Ethers (m = 5, 6) and Their Benzo-derivatives by Solvent Extraction

The ion-pair formation constants {K(j)(0): j = MA (metal salt), MLA} of NaO(2)CCF(3) (Na(+)tfa(-)) and its ion-pair complexes (MLA) in water (w) were determined potentiometrically at 25 degrees C and an ionic strength (I) of zero. 15-Crown-5 (15C5), 18-crown-6 ethers (18C6), and their mono-benzo derivatives were used as crown ethers (L). The extraction of Natfa by these four L from w into 1,2-dichloroethane was done at 25 degrees C, and then the extraction constants (K(ex)) for NaLtfa were calculated by using the K(j) values, which were estimated from the corresponding K(j)(0) ones at I of the w-phases, and other equilibrium constants. Also, the distribution constants (K(D,MLA)) of NaLtfa between the two phases were obtained from a thermodynamic cycle expressing K(ex). An interaction of w-molecules with NaLA was considered using a relation of log K(D,MLA) with log K(D,L), derived from the Scatchard-Hildebrand equation, where K(D,L) denotes the distribution constant of L between the two phases. The interaction increased in the order of NaL (picrate) < free L 相似文献   

Extraction-spectrophotometric determination of niobium with dibenzo-18-crown-6 and thiocyanate

A method is described for the direct spectrophotometric determination of micro-amounts of niobium by extraction into a benzene solution of dibenzo-18-crown-6 (L) from 3M hydrochloric acid containing potassium thiocyanate. The molar absorptivity of the extracted complex is 3.85 +/- 0.03 x 10(4) 1.mole(-1).cm(-1) (relative standard deviation 0.8%). Co-ordinatively unsaturated complexes of the type [NbO(SCN)(3)](2)L and NbO(SCN)(3)L are extracted, along with ion-pairs, especially when small amounts of L are used for extraction. The ion-pair complex [NbOCl(2)(SCN)(3)][(LK)(2)] seems to be the main species formed in the organic phase.     

Determination of copper,nickel, cobalt,silver, lead,cadmium, and mercury ions in water by solid-phase extraction and the RP-HPLC with UV-Vis detection

A new method for the simultaneous determination of seven heavy metal ions in water by solid-phase extraction and reversed-phase high-performance liquid chromatography (RP-HPLC) was developed. The copper, nickel, cobalt, silver, lead, cadmium, and mercury ions were pre-column derivatized with tetra( m-aminophenyl)porphyrin (T m-APP) to form colored chelates. The metal-T m-APP chelates in 100 mL of sample were preconcentrated to 1 mL by solid-phase extraction with a C(18 )cartridge; an enrichment factor of 100 was achieved. The chelates were separated on a Waters Xterra()RP(18) column by gradient elution with methanol (containing 0.05 mol L(-1) pyrrolidine-acetic acid buffer salt, pH 10.0) and acetone (containing 0.05 mol L(-1) pyrrolidine-acetic acid buffer salt, pH 10.0) as mobile phase at a flow rate of 1.0 mL min(-1) and detected with a photodiode array detector. The detection limits of copper, cobalt, nickel, silver, lead, cadmium, and mercury are 2, 2, 3, 4, 3, 3, and 3 ng L(-1), respectively, in the original sample. The method was also applied to the determination of these metals in water with good results.     

The determination of traces of thiocyanate and copper(II) ions by cathodic stripping voltammetry

Cathodic stripping methods are described for the determination of traces of thiocyanate ions down to 2 × 10^-8 mol l^-1 and Cu(II) ions down to 1 × 10^-8 mol l^-1. The method involves electrolytic accumulation of copper(I) thiocyanate on the surface of a hanging mercury drop electrode followed by stripping of the deposit during the cathodic scan. For the determination of thiocyanate, a copper amalgam electrode can be used. Examples of application of the method for the determination of traces of thiocyanate in common salts, in saliva and urine as well as for the determination of copper(II) ions in tap water are described.     

Comparison of silver results for canadian reference ores and concentrates and zinc-processing products by acid decomposition, tribenzylamine/chloroform extraction and fire-assay combined with atomic-absorption spectrophotometry

The results obtained for silver in Canadian reference ores and concentrates and in zinc-processing products by three atomic-absorption spectrophotometric methods are compared. "Wet chemical" methods based on the decomposition of the sample with mixed acids yield more accurate results than those based on fire-assay collection techniques. A direct acid-decomposition method involving the determination of silver in a 20% v/v hydrochloric acid-1% v/v diethylenetriamine medium is recommended for the determination of approximately 10 mug g or higher levels of silver. A method based on chloroform extraction of the tribenzylamine-silver bromide ion-association complex from 0.08M potassium bromide-2M sulphuric acid is recommended for samples containing < 10 mug of silver per g.     

Determination of colloidal and dissolved silver in water samples using colorimetric solid-phase extraction

The increase in bacterial resistance to antibiotics has led to resurgence in the use of silver as a biocidal agent in applications ranging from washing machine additives to the drinking water treatment system on the International Space Station (ISS). However, growing concerns about the possible toxicity of colloidal silver to bacteria, aquatic organisms and humans have led to recently issued regulations by the US EPA and FDA regarding the usage of silver. As part of an ongoing project, we have developed a rapid, simple method for determining total silver, both ionic (silver(I)) and colloidal, in 0.1-1 mg/L aqueous samples, which spans the ISS potable water target of 0.3-0.5 mg/L (total silver) and meets the US EPA limit of 0.1 mg/L in drinking water. The method is based on colorimetric solid-phase extraction (C-SPE) and involves the extraction of silver(I) from water samples by passage through a solid-phase membrane impregnated with the colorimetric reagent DMABR (5-[4-(dimethylamino)benzylidene]rhodanine). Silver(I) exhaustively reacts with impregnated DMABR to form a colored compound, which is quantified using a handheld diffuse reflectance spectrophotometer. Total silver is determined by first passing the sample through a cartridge containing Oxone, which exhaustively oxidizes colloidal silver to dissolved silver(I). The method, which takes less than 2 min to complete and requires only ∼1 mL of sample, has been validated through a series of tests, including a comparison with the ICP-MS analysis of a water sample from ISS that contained both silver(I) and colloidal silver. Potential earth-bound applications are also briefly discussed.