Preparation of quaternary pyridinium salts as possible proton conductors

On basis of earlier experimental experience, the transfer of protons in salts of the organic cation-inorganic anion type occurs primarily through directional arrangement of the anion-anion type short hydrogen bonds. The submitted work presents the preparation of quaternary pyridinium salts of inorganic hydrogen anions in the absence of solvent molecules in their crystal structure. These substances can form only the above-described anion-anion type hydrogen bonds; in addition, the absence of solvate anions increases the stability of the prepared compounds. A total of six substituted pyridinium salts were prepared, four of which have not been described yet: 1,2,4,6-tetraphenylpyridinium perchlorate, 1-benzyl-2,4,6-trimethylpyridinium perchlorate, 1,4-dimethylpyridinium hydrogen sulphate, 1,4-dimethylpyridinium dihydrogen phosphate, 1,4-dimethylpyridinium hydrogen sulphate, and 1,2-dimethyl-5-ethylpyridinium dihydrogen phosphate. Three of these substances were characterised by X-ray structural analysis: 1,2,4,6-tetraphenylpyridinium perchlorate crystallises in the orthorhombic system, space group Pbca; 1-benzyl-2,4,6-trimethylpyridinium perchlorate crystallises in the monoclinic system, space group P2₁/c; and 1,4-dimethylpyridinium dihydrogen phosphate crystallises in the monoclinic system, space group C2/c. This structure contains an oriented anion network bond by short anion-anion type hydrogen bonds with the donor acceptor lengths of 2.567(3) Å and 2.557(3) Å and thus fulfils the requirements of a good proton conductor.     

Ion-selective electrodes and enzyme electrodes in environmental and clinical studies.

Electrodes have been developed for the assay of glucose, urea, amino acids, uric acid, phosphate, nitrate and perchlorate. The electrodes for the organic compounds are enzyme electrodes which are prepared by chemically immobilizing an enzyme over the outside of a conventional ion-selective electrode. These electrodes will be discussed in depth. The progress and the development of the electrodes that show sensitivity and selectivity for phosphate, nitrate and perchlorate will be outlined. The basis of these sensors is a complex of a transition metal of either an analog of thiourea or an organic chelator, such as 1,10-phenanthraline. Such electrodes respond linearly to phosphate, nitrate or perchlorate, and show selectivity over sulphate, halides and acetate. The linear range of all these electrodes is approx. 10(-1)-10(-5) M with a near Nernstian slope and a reproducibility of 1%. The electrodes are stable and can be used continuously.     

Copper(II) complexes of 2-(pyrrolidinomethyl)- and 2-(3-pyrrolinomethyl)pyridine N-oxides

Summary This title pyridine N-oxides have been prepared and their copper(II) complexes isolated as perchlorate, tetrafluoroborate and nitrate salts. The ligands coordinatevia both the pyridine N-oxide oxygen and the amine nitrogen to give bis(ligand) complexes for the perchlorate and tetrafluoroborate salts. The nitrate solids have [CuL(NO₃)₂] stoichiometry with monodentate nitrato-ligands. The spectral properties of these complexes are compared to those of N-alkyl-and N,N-dialkyl2-picolinamine N-oxides as well as other 2-substituted pyridine N-oxides.NATO Fellow on leave from Istanbul Medical Faculty, Istanbul University.     

Aqueous guanidinium salts: Part II. Isopiestic osmotic coefficients of guanidinium sulphate and viscosity and surface tension of guanidinium chloride, bromide, acetate, perchlorate and sulphate solutions at 298.15 K

The molality dependence of isopiestic osmotic coefficients of aqueous guanidinium sulphate, Gn₂SO₄ has been reported at 298.15 and analysed by the Pitzer equations. The Pitzer coefficients obtained from the analysis of osmotic coefficients are employed to calculate the activity coefficients. The viscosity and surface tension of aqueous guanidinium chloride (GnCl), bromide (GnBr), acetate (CH₃COOGn), perchlorate (GnClO₄) and sulphate (Gn₂SO₄) have also been measured at 298.15 K. The order in which these salts increase the viscosity and surface tension of water is: Gn₂SO₄>CH₃COOGn>GnCl>GnBr>GnClO₄. The effect of Gn₂SO₄ and CH₃COOGn on the viscosity and surface tension is stronger than that of other guanidinium salts.     

Complexometric estimation of ferric iron

Summary Ferric iron has been determined alone or in presence of barium chloride, calcium chloride, magnesium sulphate, mercuric chloride, manganese sulphate, strontium nitrate, chromic sulphate or zinc sulphate by titrating it with EDTA, using potassium thiocyanate-p-anisidine indicator. In these complexometric titrations, the quantitative results obtained by using potassium thiocyanate-p-anisidinie indicator are comparable with those obtained with Bindschedler's green indicator; and the metallic salts mentioned above do not interfere in the estimation of ferric iron by this method.     

Swelling studies of copolymeric acrylamide/crotonic acid hydrogels as carriers for agricultural uses

In this study, highly swollen acrylamide/crotonic acid hydrogels (in a rod form) containing some inorganic salts such as ammonium nitrate, potassium nitrate and ammonium sulphate used as fertilizer, an agricultural drug such as Dalapon (sodium 2,2‐dichloropropionate) and two crosslinkers such as ethylene glycol dimethacrylate and 1,4‐butandiol dimethacrylate were prepared by copolymerization of acrylamide and crotonic acid with γ‐radiation. As a result of swelling tests, the influence of γ‐ray dose and relative content of crotonic acid on the swelling properties, the diffusional behavior of water, diffusion coefficients and network properties of the hydrogel systems were examined. Acrylamide/crotonic acid hydrogels containing these salts and agricultural drug were swollen in the range 2045–400% in water, while polyacrylamide hydrogels swelled in the range 660–700%. Water intake of hydrogels followed a nonFickian‐type diffusion. Copyright © 2000 John Wiley & Sons, Ltd.     

Unexpected dependence of the protonation constant of 2,2'-bipyridyl on ionic strength

The protonation constants of 2,2'-bipyridyl and ammonia have been determined by pH titration at 25 degrees , at ionic strengths of 0.1, 0.2, 0.5, 1.0, 1.5 and 2.0M obtained by using LiNO(3), NaNO(3), KNO(3), LiClO(4) and NaClO(4) as background electrolytes. The protonation constants generally change by about 0.3-0.4 log units for both ligands in nitrate media. A similar change in the protonation constant of ammonia was observed in perchlorate media. There is, however, a change of about 0.8-0.9 log units in the protonation constant of bipyridyl in the perchlorate media. This phenomenon is interpreted by postulating ion-pair formation between perchlorate and the protonated form of bipyridyl, HBp(+) + ClO(4)(-) rlharr2; HBp(+).ClO(4)(-) with formation constants of 0.54 in 2M lithium nitrate and 0.45 in 2M sodium nitrate.     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Salting-out of polar solvents from aqueous solution and its application to ion-pair extractions

Water-miscible polar solvents such as acetonitrile, 1-methyl-2-pyrrolidone and hexamethylphosphoramide can be separated from their aqueous solutions by salting-out. The McDevit-Long equation is useful in explaining the salting-out of polar solvents (whether water-miscible or not). The cobalt(II) complex with 2,2'-bipyridine can be extracted quantitatively as the ion-pair into these solvents from saturated ammonium sulphate solution containing a 10-fold molar excess of perchlorate ion. In the acetonitrile system, high distribution ratios can be obtained at high concentrations of multivalent inorganic salts and at low temperatures.     

A naked-eye detection of fluoride with urea/thiourea receptors which have both a benzophenone group and a nitrophenyl group as a signalling group

Two new colorimetric anion sensors have been synthesised where both a benzophenone group and a nitrophenyl group were used as signalling units and urea/thiourea moieties as binding sites. The receptors, effectively and selectively, recognised fluoride and carboxylate anions from other anions such as chloride, bromide, iodide, perchlorate, hydrogen sulphate and nitrate in DMSO.     

Comparative analysis of structural parameters of the nearest surrounding of nitrate and perchlorate ions in aqueous solutions of electrolytes

Data on structural parameters of the nearest surrounding of nitrate and perchlorate ions in aqueous solutions under standard conditions have been generalized. Hydration numbers, interparticle distances, and ionic association types have been discussed and compared. The major difference between the ions is that nitrate ion tends to form ion pairs, whereas perchlorate ion does not.     

Energetic salts from N-aminoazoles

New energetic salts (2, 3, 5, 6, 13, 14, 21, 22) were synthesized via the quaternization of derivatives of N-aminoazoles with nitric or perchloric acid or with iodomethane followed by metathesis reaction with silver nitrate or silver perchlorate. The structure of 2-amino-4,5-dimethyltetrazolium nitrate (21) was confirmed by single-crystal X-ray analysis. Most of the salts exhibit good thermal stabilities and low melting points. By using experimentally determined constant volume combustion energies, the standard molar enthalpies of formation were derived on the basis of designed Hess thermochemical cycles.     

Ionic strength dependence of formation constants, complexation of nitrilotriacetic acid with tungsten(VI) ion

The dependence on ionic strength of protonation of nitrilotriacetic acid and its complexation with W(VI) is reported in sodium perchlorate, sodium nitrate and sodium chloride solutions as background salts. The measurements have been performed at 25°C and various ionic strengths in the range 0.1–1.0 mol dm⁻³, using a combination of potentiometric and spectrophotometric techniques. The overall analysis of the present and the previous data dealing with the determination of stability constants at different ionic strengths allowed us to obtain a general equation, by which a formation constant determined at a fixed ionic strength can be calculated, with a good approximation, at another ionic strength, if 0.1 ≤ ionic strength ≤ 1.0 mol dm⁻³ sodium perchlorate, sodium nitrate or sodium chloride.     

The Synthesis and Formation of Complexes between Derivatives of Chiral Aza-18-Crown-6 Ethers and Chiral Primary Organic Ammonium Salts

Chiral mono aza-18-crown-6 derivatives have been prepared in optically active form and high yield from amino alcohols via a cyclization reaction with tetraethylene glycol ditosylate.The enantiomeric recognition by these chiral aza-crown ethers between chiral primary ammonium perchlorate salts has been characterized by UV–Vis at 25 °C in chloroform.     

Structural Effects and Microheterogeneity in Concentrated Solutions and Their Role in the Formation of Cadmium Chloride Complexes

The proton relaxation rate and Raman spectra in the regions of vibrations of the Cd-Cl, Cd-OH₂ groups and bending vibrations eta₄ of nitrate ions in the systems CdAn₂-NaCl-H₂O (An = Cl^-, ClO₄ ^-, NO₃ ^-) were measured. In the range of subeutectic concentrations of cadmium salts all possible forms of chloride complexes of cadmium are formed. In the posteutectic region the formation of complexes is structurally induced; it depends on the nature of dominating cybotactic groups and is limited to the formation of only low-coordinate forms. The mechanisms of the formation of chloride complexes in perchlorate and nitrate systems were proposed. It was concluded that, in contrast to the chloride system, the nitrate and perchlorate systems in the presence of sodium chloride are characterized by structural microheterogeneity. The distinctions in the nature of the microheterogeneity and its effect on the complex formation were considered. The solubility polytherm and Raman spectra of the system Cd(NO₃)₂-NaCl-H₂O with a high content of the both salts were measured. The causes of abnormally high mutual solubility of nitrate salts in multicomponent solutions containing salts that crystallize in the hydrated and anhydrous forms were suggested.     

Titration of cyanide and hexacyanoferrate(II) with silver nitrate-I Calculation of titration curves for potentiometric and conductometric titration

Stepwise potentiometric titration of cyanide and hexacyanoferrate(II) with silver nitrate is possible in the absence of potassium ions. At an initial concentration below 5.00 x 10(-4)M, cyanide can be titrated with silver nitrate (Ag:CN = 1:2) and the end-point indicated by precipitation of silver hexacyanoferrate(II); hexacyanoferrate(II) can be titrated with silver nitrate (Ag: Fe(CN)(6) = 4:1) and the end-point indicated by precipitation of silver dicyanoargentate. The hexacyanoferrate(II) reacts with silver to form two poorly soluble salts, Ag(4)Fe(CN)(6), KAg(3)Fe(CN)(6). The formation of these salts has been confirmed by conductometric titration of hexacyanoferrate(II) with silver nitrate in solutions containing varying concentrations of potassium nitrate.     

Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Polymerization of 2-Oxazolines. IV. The Structure and the Reactivity of 2-Substituted-2-oxazolines and Oxazolinium Perchlorates

Abstract

In order to elucidate the structure and the stability of the growing cationic end in the polymerization of 2-oxazolines, the reactions of 2-bromoethylbenzamide with silver salts such as silver perchlorate, tetrafluoroborate, nitrate, nitrite, cyanate, and acetate were investigated. The reactions with silver perchlorate and tetrafluoroborate gave the 2-phenyl-2-oxazolinium salt (intramolecular O-alkylation product) quantitatively, whereas the reaction with silver nitrate gave the corresponding alkyl nitrate (staight-chain product). For the reactions with silver nitrite, cyanate and acetate, both products were obtained. In order to elucidate the ring-opening reactivity of the oxazolinium cation, the ring-opening addition reaction of N-methyl-2-oxazolinium perchlorates with pyridine was investigated. It was found that N-methyl-2-phenyl-2-oxazolinium perchlorate was more reactive toward the nucleophilic ring-opening reaction than was N-methyl-2-methyl-2-oxazolinium perchlorate. The mutual copolymerization of 2-phenyl-2-oxazoline with the other 2-substituted-2-oxazoline such as 2-methyl-, 2-isopropyl-, and 2-benzyl-2-oxazoline indicated that the monomer reactivity ratio r₂ was much larger than unity, whereas r₁ was very much smaller. Based on these results, the influence of the structure and the reactivity of the monomer and the growing cationic end of the polymerizability of 2-oxazolines are discussed.     

Voltammetric determination of nitrate,perchlorate and iodide at a hanging electrolyte drop electrode

The use of a hanging electrolyte drop electrode is examined for the determination of nitrate, perchlorate and iodide. A three-electrode system was used with a polarographic analyzer. Crystal violet dicarbollylcobaltate(III) electrolyte in the nitrobenzene phase and magnesium sulphate in the aqueous phase with a Pb/PbSO₄ reference electrode made it possible to increase the viable potential range. For nitrate, the peak current/concentration relation was linear over the range 0–5 × 10^?5 M, and nitrate in potable water was easily determined.     

Excess enthalpy and entropy of aqueous tetramethylguanidinium perchlorate and chloride and tetramethylammonium nitrate

Heats of dilution have been measured for aqueous solutions of tetramethylguanidinium perchlorate and chloride and for tetramethylammonium nitrate at 25°C. Excess enthalpies have been calculated and combined with excess free energy data which were previously published to yield excess entropy. These results furnish further evidence for the association of the tetramethylguanidinium salts in aqueous solutions.