The synthesis of naphtho[1,2-b]thiophene and all of the eight isomers of monomethylnaphtho[1,2-b]thiophene

The synthesis of naphtho[1,2-b]thiophene and all of the eight monomethylnaphtho[1,2-b]thiophene isomers is described.     

Synthesis of fluorantheno[1,2-b]thiophene and fluorantheno[3,2-b]thiophene,isosteres of benzofluoranthenes

The total syntheses of fluorantheno[1,2-b]thiophene and fluorantheno[3,2-b]thiophene are reported. The common cyclobutanone intermediate which was obtained by [2 + 2] addition of fluorenylidene ketene with 2,3-dihydrothiophene underwent regioselectively α or β ring opening to lead to linear or angular PAC skeleton molecules under desired conditions. 2,3-Dichloro-5,6-dicyanobenzoquinone was applied for aromatization to achieve the formation of PAC's. These two isosteres exhibit very similar uv/visible spectra to benzo[a] and [b]fluoranthenes respectively. Spectroscopic data used for their structural assignments is also discussed.     

Benzo[3,4]cyclobuta[1,2-b]thiophene

Tye synthesis of thieno[3,2-c]cinnoline is described; vapour phase thermolysis of this compound gives benzo[3,4]cyclobuta[1,2-b]thiophene.     

2,3-Dihydronaphtho[1,2-b]thiophene 1-oxides in the synthesis of 2,3-dihydronaphtho- and naphtho[1,2-b]thiophenes

2,3-Dihydronaphtho[1,2-b]thiophene 1-oxides, obtained by thermolysis of alkyl 1-naphthyl sulfoxides, are reduced by lithium aluminum hydride to 2,3-dihydronaphtho [1,2-b]thiophenes, whereas under the influence of acetic and trifluoroacetic anhydrides they form naphtho[1,2-b]thiophenes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1629–1633, December, 1989.     

Derivatives of benzo[5,6]cyclohepta[1,2-b]thiophene. Synthesis of 2,3,7,8-tetrahydro-3-oxothieno[1,2-b]cyclohepta[5,6,7-de]isoquinoline and 1,2,3,7,8,11b-hexahydro-3-oxothieno[1,2-b]cyclohepta[5,6,7-de]isoquinoline

The synthesis of the title compounds was carried out by cyclization via isocyanate of (E)-4,5-dihydro-10H-benzo[5,6]cyclohepta[1,2-b]-thiophene-10-ylideneacetic acid and 4,5-dihydro-10H-benzo[5,6]cyclohepta[1,2-b]-thiophene-10-ylacetic acid respectively, which were obtained by the Wadsworth-Emmons modification of the Wittig reaction of 4,5-dihydro-10H-10-oxobenzo[5,6]cyclohepta[1,2-b]thiophene and triethyl phosphonacetate. The structures of these new compounds are described.     

Benzannelated analogs of phenanthro[1,2-b]- and [2,1-b]thiophene: Synthesis and structural characterization by two-dimensional NMR and X-ray techniques

Syntheses of benzo[3,4]phenanthro[1,2-b]thiophene, benzo[3,4]phenanthro[2,1-b]thiophene and their 1-methyl analogs are reported as potential constituents of solvent refined coal liquids and for mutagenicity testing. The attempted synthesis of the 13-methyl analogs which gave the 11-methyl isomers is also described. Total assignments of the ¹H- and ¹³C-nmr spectra based on long range optimized heteronuclear protoncarbon two-dimensional chemical shift correlation are reported. Carbon assignments obtained for benzo[3,4]-phenanthro[1,2-b]thiophene using this approach were confirmed with a 125 MHz ¹³C–¹³C INADEQUATE spectrum. X-Ray crystal structures were determined for benzo[3,4]phenanthro[1,2-b]thiophene and 1-methyl-benzo[3,4]phenanthro[2,1-b]thiophene. Both molecules were helically distorted from planarity. Close intramolecular contacts between the bay region H1–H13 and ClMe-H13 of 2.03 and 2.28 Å, respectively, were responsible for the distortions. There were no close intermolecular contacts of <3.5Å. both molecules refined to an R value of <0.05.     

Studies on the synthesis of trans-dihydrodiols of polycyclic aromatic thiaarenes as potential proximate carcinogenic metabolites: first synthesis of trans-10,11-dihydroxy-10,11-dihydroacenaphtho[1, 2-b]benzo[d]thiophene and 6,7-dihydroxy-6,7-dihydronaphtho[1, 2-b]thiophene

Polyaromatic thiophene compounds are found to occur concomitantly with numerous coal-derived products and shale oils and are suspected mutagens and/or carcinogens. The first synthesis of the two title compounds 9 and 16 has been achieved in five or four steps starting from 8,9-dihydroacenaphtho[1,2-b]benzo[d]thiophene (1) and 7-methoxynaphtho[1,2-b]thiophene (12), respectively. Compound 1 was converted to the cis-diol (11) (via treatment with OsO(4)/pyridine) or to trans-diol (3) [via Prevost reaction (PhCOOAg/I(2)) followed by hydrolysis] in 95-98% yield, respectively. Subsequent dehydration (PTS/benzene) of the diol followed by aromatization of the resulting ketone (5) produced the phenolic compound 6 in 97% yield. Oxidation of the phenol with phenyl iododiacetate followed by hydrolysis of the o-quinone monoketal 7 gave the o-quinone (8) in 86% yield. Stereoselective reduction of 8 with NaBH(4)/EtOH under oxygen afforded trans-10,11-dihydroxy-10,11-dihydroacenaphtho[1,2-b]benzo[d]thi oph ene(9) (orange yellow solid) in 55% yield. Compound 16 was obtained as a colorless solid, through the stereoselective reduction of the o-quinone 15 (with NaBH(4)), which in turn was prepared from 12 following the protocol of functional group transformation of methoxy --> phenol --> o-quinone monoketal --> o-quinone, as used in the previous case. The yields for all the steps are very good. The mutagenicity assay of compound 9 and 16 as well as their parent thiaarenes have been performed. The results showed that 9 may not be the proximate carcinogen of acenaphtho[1,2-b]benzo[d]thiophene, while it is likely that compound 16 is one of the possible proximate carcinogens for naphtho[1,2-b]thiophene.     

Derivatives of benzo[4,5]cyclohepta[1,2-b]thiophene. 4. Synthesis of 1-(9,10-dihydro-4H-benzo[4,5]cyclohepta[1,2-b]thiophen-4-yl)-3-alkylaminoazetidines

Thirteen 1-(9,10-dihydro-4H-benzo[4,5]cyclohepta[1,2-b]thiophen-4-yl)-3-alkylaminoazetidines 11 have been synthesized in three steps from 4-amino-9,10-dihydro-4H-benzo[4,5]cyclohepta[1,2-b]thiophene ( 6 ), which was obtained from the reduction of either 4-azido 4 or 4-hydroxyimino 5 derivatives. All the compounds have been evaluated as potential antidepressive agents.     

Synthesis of phenaleno[1,9-bc]thiophene

The cyclization of 2-acetonylthionaphthalene, prepared from 2-mercaptonaphthalene (1) and chloro-acetone in the presence of sodium hydroxide, with polyphosphoric acid gave 1-methylnaphtho[2,1-b]thiophene (4) in 64% overall yield from 1. By bromination with N-bromosuccinimide, 4 was converted in 40% yield into l-bromomethylnaphtho[2,1-b]thiophene (8) . Treatment of 8 with potassium cyanide in a phase-transfer medium gave l-cyanomethylnaphtho[2,1-b]thiophene (10) in good yield. Compound 10 was reduced to the corresponding aldehyde 11 and then cyclized with polyphosphoric acid to phenaleno[l,9-bc]thiophene (12) in 24% overall yield from 10.     

A facile synthesis of benzo[b]thiophene derivatives

Lithiation of S-(2-methylphenyl) N,N,N',N'-tetramethylphosphorodiamidothioate with sec-BuLi at -105° gave the corresponding benzylic anion which was acylated with various aromatic esters to give various deoxybenzoin derivatives in moderate to high yields. Acidic treatment of these products in refluxing formic acid gave 2-arylbenzo[b]thiophene derivatives. 2-Methylbenzo[b]thiophene and benzo[b]thiophen-2(3H)-one were also prepared using the similar procedure.     

The synthesis of novel polycyclic heterocyclic ring systems. 2. Naphmo[2,1-b:4,3-g]bisbenzo[b]thiophene

The novel polycyclic heterocyclic ring system, naphtho[2,1-b:4,3-g]bisbenzo[b]thiophene was synthesized from 5-[2-(2-bromo-3-thienyl)ethenyl]naphtho[2,1-b][1]benzothiophene. The assignment of its ¹H and ¹³C nmr spectra was also accomplished by utilizing two-dimensional nmr methods.     

Planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units

A series of planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units were synthesized. The optical data indicate a blue shift of the absorption maximum in comparison to the alpha-linked analogues due to cross-conjugation between fused rings. The crystal structures of 3,3'-bi(thieno[3,2-b]thiophene) and 3,3';6',3"-ter(thieno-[3,2-b]thiophene) reveal edge-to-face pi-stacked dimer motifs, whereas the crystal structure of 3,3'-bis(dithieno[3,2-b:2',3'-d]thiophene) consists of face-to-face pi-stacked molecules. [structure: see text]     

K-region oxides and imines of benzo[b]phenanthro[2,3-d]thiophene and benzo[b]phenanthro[3,2-d]thiophene

The syntheses of the K-oxides and K-imine derivatives of benzo[b]phenanthro[2,3-d]thiophene and benzo-[b]phenanthro[3,2-d]thiophene are described. The parent hydrocarbons 1 and 2 were oxidized with osmium tetroxide and sodium metaperiodate, and the dialdehydes 12 and 18 so formed, cyclized to the corresponding epoxides 1a,12b-dihydrobenz[b]oxireno[9,10]phenanthro[2,3-d]thiophene ( 7 ) and 1a,12b-dihydrobenz-[b]oxireno[9,10]phenanthro[3,2-d]thiophene ( 13 ). Reaction of the oxiranes with sodium azide gave mixtures of azido-alcohols that, in turn, were transformed to the thiaarene imines 1a,12b-dihydro-1H-benz[b]azirino-[9,10]phenanthro[2,3-d]thiophene ( 8 ) and 1a,12b-dihydro-1H-benz[b]azirino[9,10]phenanthro[3,2-d]thiophene ( 14 ), respectively, with the aid of tri-n-butylphosphine.     

Derivatives of benzo[4,5]cyclohepta[1,2-b]thiophene. 1. Synthesis and cyclization of N-(9,10-dihydro-4H-benzo[4,5]cyclohepta-[1,2--6]thiophene-4-ylmethyl)amides

Starting from ketone III several acyl derivatives of 4-aminomethyl-9,10-dihydro-4H-benzo[4,5]cyclohepta-[1,2--6]thiophene (VII) have been synthesized. The intramolecular cyclization of some of these new amides through the Bischler-Napieralski reaction is described.     

Selective multiple magnesiations of the thieno[3,2-b]thiophene scaffold

A full functionalization of all four positions of the thieno[3,2‐b]thiophene scaffold was achieved. Starting from 2,5‐dichlorothieno[3,2‐b]thiophene, magnesiation of the 3‐ and 6‐position using tmpMgCl?LiCl furnishes, after trapping with various electrophiles, 3,6‐difunctionalized dichlorothieno[3,2‐b]thiophenes. Subsequent dechlorination and regioselective metalation or regioselective magnesium insertion into the C? Cl bond provides fully functionalized thieno[3,2‐b]thiophenes. Furthermore, new condensed heterocycles and small oligomers of these compounds with potential applications in material chemistry have been prepared.     

Synthesis of benzo[4,5]phenaleno[1,9-bc]thiophene and benzo[4,5]phenaleno[9,1–6c]thiophene

Two pentacyclic thiophenes, benzo[4,5]phenaleno[1,9–6c]thiophene ( 1 ) and benzo[4,5]phenaleno[9,1-bc]-thiophene (2) were synthesized via the corresponding 3-methylphenanthro[2,1-b]thiophene (7) and 1-methylanthra[2,1–6]thiphene ( 19 ).     

General synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives

A new straightforward synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives from readily available 2-methoxynaphthalenes is described. Thus, newly developed derivatives of DNTT showed very high field effect mobility in the vapor-processed field-effect transistors up to 8 cm(2) V(-1) s(-1).     

Heteropolycyclic molecules. Part IX. Synthesis of some new benzo[b]thiophene,oxofluoreno[4,3-b]thiophene,cyclic hydrazides and acridine compounds

p-Tolyl 2-thienyl ketone (I) condensed with dimethyl succinate in the presence of potassium t-butoxide to give the trans (SC₄H₃/CO₂Me) half-ester (IIIa) whose configuration was deduced by cyclization to the corresponding benzo[b]thiophene derivatives. Carbamates, esters, cyclic hydrazides and substituted phenolic and acetic acids useful as antibacterial and antiinflamatory agents were obtained. The reaction of ketone I with malononitrile to give ylidenemalononitrile II was also considered.     

Benzo[b] thiophene derivatives. XIV. Derivatives of naphtho[1,8-c] thiophene

In the course of our efforts to synthesize the sulfur isostere of lysergic acid, we have prepared a number of derivatives of the little known naphtho[1,8-bc]thiophene ring system. Two previously reported compounds, 2-bromo-3,4-dihydro-5-oxo-5H-naphtho[1,8-bc]thiophene and 2-bromo-5-hydroxy-3,4-dihydro-5H-naphtho[1,8-bc] thiophene have been obtained pure for the first time, and the syntheses and spectral data of eighteen new compounds are presented. The new compounds include alcohols, ketones, and halogen derivatives of partially reduced naphtho-[1,8-bc] thiophene, as well as the sulfones of several of these compounds.     

Convenient synthesis and anticancer evaluation of novel pyrazolyl-thiophene,thieno[3,2-b]pyridine,pyrazolo[3,4-d]thieno[3,2-b]pyridine and pyrano[2,3-d]thieno[3,2-b]pyridine derivatives

The newly synthesized 3-(3-amino-5-(phenylamino)-4-(phenylcarbamoyl)thiophen-2-yl)-3-oxopropanoate was utilized as a precursor for the synthesis of pyrazolyl-thiophene derivative, which undergoes cyclization upon treatment with benzaldehyde derivatives to provide pyrazolo[3,4-d]thieno[3,2-b]pyridines. Basic treatment of pyrazolyl-thiophene derivative with phenyl isothiocyanate followed by subsequent addition of chloroacetone and/or ethyl bromoacetate yielded the thiazolylidene-pyrazolyl thiophenes. In addition, the building block 3-(3-amino-5-(phenylamino)-4-(phenylcarbamoyl)thiophen-2-yl)-3-oxopropanoate was converted into the corresponding thieno[3,2-b]pyridine compounds through its reactions with (DMF-DMA) and/or heating in sodium ethoxide. Moreover, the reaction of 7-hydroxy-5-oxo-N-phenyl-2-(phenylamino)-4,5-dihydrothieno[3,2-b]pyridine-3-carboxamide with 2-arylidenemalononitrile produced the new annulated pyrano[2,3-d]thieno[3,2-b]pyridines. The prepared thiophene-based compounds were evaluated against HepG2, PC3, and MCF-7 cancer cells, and normal fibroblast cell (WI38). The pyrazolo[3,4-d]thieno[3,2-b]pyridine and pyrano[2,3-d]thieno[3,2-b]pyridine compounds substituted with chlorophenyl group presented promising cytotoxic activities against HepG2 cancer cell line without any human toxicity. Docking study for the synthesized thiophene compounds delivered valuable insights about the binding interactions with the crystal structure of NS5B enzyme with PDB ID (4TLR).