Carboxyfluorescein leakage from poly(ethylene glycol)-grafted liposomes induced by the interaction with serum

The effects of fetal bovine serum (FBS) on carboxyfluorescein (CF) leakage from poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were investigated. PEG-liposomes were prepared from dipalmitoylphosphatidylcholine (DPPC) and distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) having PEG molecular weights of 1000, 2000, 3000 and 5000. The presence of FBS dramatically increased CF leakage from liposomes near the gel-liquid crystalline phase transition temperature, but had little effect at lower and higher temperatures. The CF leakage from PEG-liposomes whose molecular weight in PEG units was above 2000 was suppressed compared with that of liposomes without PEG. And, there was hardly any difference in the effect of the PEG molecular weight of the PEG-lipids on CF leakage from PEG-liposomes with FBS when PEG-lipids with a molecular weight in PEG units above 2000 were used. On the other hand, the leakage of CF from liposomes containing 0.145 mol fractions of DSPE-PEG1000 was larger than that of liposomes without PEG. Furthermore, the effects of FBS on the cooperative units of lipid molecules during the gel-liquid crystalline phase transition of liposomes were examined. However, the cooperative units of liposomes with FBS had little change compared with that of liposomes without FBS.     

Stabilized liposomes with phospholipid polymers and their interactions with blood cells

To stabilize a phospholipid liposome, addition of various water-soluble polymers into a liposomal aqueous suspension was investigated. The water-soluble polymers were poly(ethylene oxide) (PEO), poly(N-vinyl pyrrolidone) (PVPy) and poly[2-methacryloyloxyethyl phosphorylcholine(MPC)], and poly[MPC-co-n-butyl methacrylate(BMA)]. The gel–liquid crystal transition temperature (T_c) of the diparmitoylphosphatidylcholine (DPPC) liposome was not changed by addition of these polymers significantly. However, membrane fluidity of DPPC liposome treated with water-soluble polymers, which was measured with fluorescence probe, depended on the chemical structure of the water-soluble polymers. In the case of PEO and PVPy, the temperature dependence of membrane fluidity was the same as that of the original DPPC liposome, on the other hand, poly(MPC) and poly(MPC-co-BMA) induced a rise in the temperature where an increase in the membrane fluidity was observed. The release of carboxy fluorescein from the DPPC liposome was suppressed by the addition of the MPC polymers. The liposomes in the MPC polymer solution were stable compared with those in water when plasma was added into the suspension. Interactions with stabilized liposome with blood cells such as platelets and erythrocytes were evaluated. Activation of platelets in contact with liposome covered with poly(MPC) or poly(MPC-co-BMA) was less than PEO-stabilized liposome. On the other hand, no hemolysis of erythrocytes was observed when every polymer-treated liposome was added in the suspension of erythrocytes. Based on these results, the MPC polymers could interact with the liposome surface, adsorb on the liposomes and stabilize them, and had no adverse effect to the blood cells even when they were in a physiological environment.     

Thermotropic behaviour of dipalmitoylphosphatidylcholine liposomes containing retinoids

Differential scanning calorimetry has been used to investigate the thermotropic behaviour of DPPC liposomes in the presence of different amounts of retinoids in a study of the sites concerned in the mutual lipid-retinoid interaction. The perturbing effect of retinal and retinol on DPPC liposome gel-liquid crystal phase transition has been related to the difference in the polar end group of retinoid. The hydrophilic polar group prevalence over the apolar tail has been evidentiated. Membrane fluidity increases by increasing the retinoid amount. These liposomes displayed a phase separation at high retinal or retinol concentrations.     

Synthesis of well‐defined block copolymer composed of flexible amphiphilic poly(ethylene glycol) and hydrophobic liquid crystalline segments by living coordination polymerization of allene derivatives and its application to thin film with perpendicularly oriented cylindrical nanostructure

A block copolymer composed of a flexible polar poly(ethylene glycol) (PEG) and a less polar liquid crystalline poly(allene) segments is prepared by the living coordination polymerization of an allene derivative possessing trans‐azobenzene‐containing mesogenic substituent by the use of a π‐allylnickel macroinitiator bearing PEG segment. The thin film of the block copolymer is prepared by the spin coating of its solution onto mica or silicon wafer which proves to possess perpendicularly oriented nanocylindrical microphase separated structures as supported by the differential calorimetric, polarized optical microscopic, grazing‐incidence small‐angle X‐ray scattering, transmission electron microscope, and atomic force microscope measurements.     

Synthesis of graft copolymers having phospholipid polar group by macromonomer method and their properties in water

Water-soluble graft copolymers with phospholipid polar group were synthesized by the macromonomer method and their properties in water were investigated by surface tension and fluorescence spectroscopic measurements. At first, 2-methacryloyloxyethyl phosphorylcholine (MPC) was polymerized in the presence of 3-mercapt propionic acid as a chain transfer agent and carboxyl group-terminated oligo (MPC) was obtained. The oligo (MPC) reacted with glycidyl methacrylate to convert the carboxyl group to a polymerizable methacryloyl group. The MPC macromonomer obtained was copolymerized with hydrophobic n-butyl methacrylate (BMA) and a graft copolymer was obtained. The graft copolymer, poly(MPC-graft-BMA), was water-soluble when the MPC unit mole fraction was above 0.40. The surface tension of the aqueous solution of poly(MPC-graft-BMA) did not depend on the polymer concentration below 0.1 wt %. This tendency was the same as that which appeared in aqueous poly(MPC) solution. The fluorescence intensity of hydrophobic probes observed in an aqueous solution of the poly (MPC-graft-BMA) was also the same level as that observed in the case of poly(MPC). These results clearly indicated that the poly(MPC-graft-BMA) took a domain structure like micelle in water, i.e., the hydrophobic poly(BMA) backbone was in the core part and the hydrophilic poly(MPC) chain formed the shell part of the micelle. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Structural effects of lipophilic methotrexate conjugates on model phospholipid biomembranes

Lipophilic conjugates of the antitumor drug methotrexate (MTX) with lipoamino acids (LAAs) have been previously described as a tool to enhance MTX passive entrance into cells, overcoming a form of transport resistance which makes tumour cells insensitive to the antimetabolite. A knowledge of the mechanisms of interaction of such lipophilic derivatives with cell membranes could be useful for planning further lipophilic MTX derivatives with an optimal antitumour activity. To this aim, a calorimetric study was undertaken using a biomembrane model made from synthetic 1,2-dipalmitoyl-glycero-3-phosphocholine (DPPC) multilamellar liposomes. The effects of MTX and conjugates on the phase transition of liposomes were investigated using differential scanning calorimetry.

The interaction of pure MTX with the liposomes was limited to the outer part of the phospholipid bilayers, due to the polar nature of the drug. Conversely, its lipophilic conjugates showed a hydrophobic kind of interaction, perturbing the packing order of DPPC bilayers. In particular, a reduction of the enthalpy of transition from the gel to the liquid crystal phase of DPPC membranes was observed. Such an effect was related to the structure and mole fraction of the conjugates in the liposomes.

The antitumour activity of MTX conjugates was evaluated against cultures of a CCRF–CEM human leukemic T-cell line and a related MTX resistant sub-line. The in vitro cell growth inhibitory activity was higher for bis(tetradecyl) conjugates than for both the other shorter- and longer-chain derivatives. The biological effectiveness of the various MTX derivatives correlated very well with the thermotropic effects observed on the phase transition of DPPC biomembranes.     

Novel Amphiphilic Diblock and Triblock Liquid‐Crystalline Copolymers with Well‐Defined Structures Prepared by Atom Transfer Radical Polymerization

Summary: Based on a hydrophilic poly(ethylene oxide) macroinitiator (PEOBr), a novel amphiphilic diblock copolymer PEO‐block‐poly(11‐(4‐cyanobiphenyloxy)undecyl) methacrylate) (PEO‐b‐PMA(11CB)) was prepared by atom transfer radical polymerization (ATRP) using CuCl/1,1,4,7,10,10‐hexamethyltriethylenetriamine as a catalyst system. An azobenzene block of poly(11‐[4‐(4‐butylphenylazo)phenoxyl]undecyl methacrylate) was then introduced into the copolymer sequence by a second ATRP to synthesize the corresponding triblock copolymer PEO‐b‐PMA(11CB)‐b‐PMA(11Az). Both of the amphiphilic block copolymers had well‐defined structures and narrow molecular‐weight distributions, and exhibited a smectic liquid‐crystalline phase over a wide temperature range.

The amphiphilic triblock copolymer synthesized here.     

Effect of water-soluble polymers on fusion of egg yolk and soybean phospholipid liposomes

The efficiencies of polyelectrolytes, i.e., polycations and polyanions, and several kinds of water-soluble polymers as fusogens on soybean phospholipid liposome (SL) and egg yolk phospholipid liposome (EL) were investigated by the fluorescence quenching method. There were optimal concentrations for the induction of fusion in every system. Polycations induced fusion of liposomes at very low concentration in comparison with other polymers. Poly(carboxylic acid)s induced fusion at relatively high concentration. A strong acidic polyanion with high molecular weight also induced fusion of liposomes. The induction efficiency of poly(ethylene glycol) on fusion was higher than other nonionic polymers. The efficiency of fusion of EL was lower than that of SL in all systems because of the higher stability of EL membrane. It was found that electrostatic interactions, hydrogen bonding and/or hydrophobic interaction between these water-soluble polymers and liposomal membranes played an important role on aggregation and fusion of liposomes.     

The physicochemical/thermodynamic balance of advanced drug liposomal delivery systems

The aim of this work is to study the morphological characteristics via fractal analysis and the alterations of the thermotropic behavior of dipalmitoylphosphatidylcholine (DPPC) liposomes, caused by the incorporation of cholesterol, poly(amidoamine) (PAMAM) dendrimer, and MPOx (poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline)) gradient block copolymer (9:1 molar ratio). A gamut of light scattering techniques and differential scanning calorimetry were used in order to extract information on the morphological (in different dispersion media) and thermodynamic characteristics of liposomal drug nanocarriers, respectively. The vesicles’ structure of liposomes has a different thermodynamic content, which corresponds to a different thermotropic behavior, in comparison to pure lipid bilayers. The observed metastable phase only for DPPC liposomes has been considered as a “physical impurity”, which leads to “physical incompatibility” and consequently promotes the aggregation of DPPC liposomes in aqueous media. The incorporation of biomaterials such as PAMAM G4 and MPOx, caused alterations in the thermotropic behavior of DPPC liposomes affecting only the main transition specific enthalpy ΔH. All the other calorimetric parameters remained unaltered. These findings supported the hypothesis that the exceptional stability and transition cooperativity of the chimeric liposomal membrane might be due to the reduction of the vesicle size with the smaller membrane curvature that is indicated by the fractal dimensionality of the system. In conclusion, the results from the thermal analysis of the liposomal systems were in line with the picture of their structural characteristics, as indicated by the interplay between physicochemical and thermodynamical parameters, which determines their fractal morphology.     

Preparation of micelles with azobenzene at their coronas or cores from ‘nonamphiphilic’ diblock copolymers

Micelles with azobenzene at the coronas or the cores were prepared by the micellization of nonamphiphilic diblock copolymers through hydrogen bond cross-linking. We used 4-(phenylazophenoxymethyl)styrene (AS) as the azobenzene. A poly(vinylphenol)-block-poly(AS-co-styrene) diblock copolymer (PVPh-b-P(AS-co-St)) was prepared by combination of the nitroxide-mediated living radical polymerization and the hydrolysis. The copolymer contained ca. 1 mol% of the azobenzene units in the P(AS-co-St) blocks on the basis of ¹H NMR analysis. The PVPh-b-P(AS-co-St) copolymer showed no micellization in 1,4-dioxane, the nonselective solvent. Dynamic light scattering demonstrated that the copolymer formed micelles in the presence of 1,4-butanediamine (BDA) in this solvent. ¹H NMR analysis revealed that the azobenzene moieties were located at the coronas of the micelles, because the signals of the aromatic protons originating from the azobenzene had no changes in the shape and the intensity by the micellization. UV analysis supported the presence of the azobenzene at the micellar coronas. The size of the PVPh-b-P(AS-co-St) micelles was independent of the copolymer concentration. On the other hand, the aggregation number of the micelles was dependent not only on the copolymer concentration but also on the kind of the diamine. A poly(AS-co-vinylphenol)-block-polystyrene diblock copolymer (P(AS-co-VPh)-b-PSt) formed the micelles with the azobenzene at the cores of the micelles by BDA. UV analysis demonstrated that the azobenzene at the micellar cores still had the potential to function as photorefractive switching.     

Mixed layers of DPPC and a linear poly(ethylene glycol)-b-hyperbranched poly(glycerol) block copolymer having a cholesteryl end group

Interactions of the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) with the amphiphilic diblock copolymer Ch-lPEG₃₀-b-hbPG₂₄ (ChP) are studied at the air–water interface by surface pressure–mean molecular area (π–mmA) measurements of mixed Langmuir films and adsorption measurements of ChP to the air–water interface covered with DPPC monolayers at different initial surface pressure values π ₀. ChP is composed of a single hydrophobic cholesteryl (Ch) moiety covalently bound to a diblock copolymer consisting of a hydrophilic linear poly(ethylene glycol) (lPEG) block and a hydrophilic hyperbranched poly(glycerol) (hbPG) block. Langmuir isotherms and compression moduli of the mixed Langmuir films of different molar ratios reveal distinct interactions between DPPC and ChP during compression. It is demonstrated that the behavior of the DPPC/ChP mixtures is dominated by DPPC up to a molar ratio of 10:1, whereas the behavior is predominantly governed by ChP in mixtures with lower DPPC content (molar ratios of 5:1, 2:1, and 1:1). In adsorption measurements, a strong affinity of ChP to DPPC is observed after injection into the water subphase. The surface pressure value π _in up to which ChP is able to penetrate into DPPC monolayers is determined to the remarkably high value of 48.2 mN/m which attests the favorable interactions between DPPC and the Ch moiety of ChP. Atomic force microscopy on LB films of DPPC/ChP mixtures of different molar ratios transferred onto hydrophilic substrates confirms the presence of two different phases, a DPPC-rich phase and a ChP-rich phase.     

Alteration in the temperature-dependent content release property of thermosensitive liposomes in plasma

The effect of plasma components on the temperature-dependent content release property of thermosensitive liposomes has been described. Temperature-sensitive liposomes containing mitomycin C (MMC) were prepared from dipalmitoylphosphatidylcholine (DPPC liposomes) and a 7 : 3 mixture of DPPC and dipalmitoylophosphatidylglycerol (DPPC/DPPG liposomes). We defined in this study the difference in the content release between 38 degrees C and 44 degrees C as an index of the temperature-dependent content release efficiency (Delta% release). In the absence of rat plasma, the Delta% release of the DPPC liposomes and the DPPC/DPPG liposomes was 83% and 71%, respectively. However, when the release study was conducted with rat plasma, the Delta% release increased to about 96% for both liposomes. In addition, while the DPPC liposomes were destabilized by rat plasma below the gel-to-liquid crystalline phase transition temperature (T(m)), MMC leakage from the DPPC/DPPG liposomes below T(m) was suppressed by rat plasma. Moreover, the plasma protein binding onto lipid bilayer was concomitant with the gel-to-liquid crystalline phase transition and then enhanced the temperature-dependent release from the DPPC/DPPG liposomes. The possible mechanism of interaction between liposomes and plasma proteins, especially serum albumin, was discussed based on differential scanning calorimetry and protein binding experiments.     

Effect of the Phospholipid Chain Length and Head Group on Beta‐Phase Formation of Poly(9,9‐dioctylfluorene) Enclosed in Liposomes

We have studied the effect of head group and alkyl chain length on β‐phase formation in poly(9,9‐dioctylfluorene) (PFO) solubilized in phospholipid liposomes. Systems studied have three different alkyl chain lengths (1,2‐dimyristoyl‐sn‐glycero‐3‐phosphatidylcholine [DMPC], 1,2‐didodecanoyl‐sn‐glycero‐3‐phosphatidylcholine [DLPC], 1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphatidylcholine [DPPC]) and head groups (1,2‐dimyristoyl‐sn‐glycero‐3‐phosphate monosodium salt [DMPA], 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphoethanolamine [DMPE] and 1,2‐dimyristoyl‐sn‐glycero‐3‐phospho‐l ‐serine sodium salt [DMPS]). Changes in liposome size upon addition of PFO are followed by dynamic light scattering. All the phospholipids induce the formation of PFO β‐phase, which is followed by the emission intensity and deconvolution of the absorption spectra. Both the head group and alkyl chain length affect the yield of β‐phase. The photophysics of PFO incorporated in liposomes is characterized by stationary and time‐resolved fluorescence, whereas the polymer‐phospholipid interactions have been studied by the effect of the PFO concentration on the phospholipid phase transitions (differential scanning calorimetry [DSC]).     

Influence of cyclodextrins on the physical stability of DPPC-liposomes

This paper reports on the physical stability of DPPC-(dipalmitoyl phosphatidyl choline) liposomes in various aqueous dispersions and its control by uncharged polymers. The effect of natural (-, β-, γ-) cyclodextrins (CDs) on the stability of bare and polymer-bearing liposomes and also, the attachment of the CD molecules and the macromolecules, respectively, to the DPPC-bilayers of small unilamellar vesicles (SUV) were studied.

It was found that above a CD/DPPC ratio, each cyclodextrin caused a definite destruction in the phospholipid bilayers. The extent of membrane destabilization due to a cyclodextrin closely related to the amount of the CD molecules bound to the DPPC-bilayers.

The polymer-coated liposomes formulated by incorporating a dissolved homopolymer or copolymer into the phospholipid bilayer of the vesicles exhibited higher physical stability. Uncharged polymers effectively hindered the disintegration of the liposomal membranes brought about by the CD molecules. The polymer layers formed around the phospholipid bilayers ensured an enhanced steric stabilization for the DPPC-liposomes. Methylcellulose (MC) with high molecular mass and a polyvinyl alcohol-co-vinyl propional copolymer alike exhibited efficient stabilizing effect.     

含有偶氮苯基的水溶性共聚物包覆的脂质体的光控释放行为

为了研究侧链含有偶氮苯基的水溶性共聚物的光异构化对脂质体内包容物的光控释放的影响,设计合成了N-异丙基丙烯酰胺(NIPAM)和丙烯酰胺基偶氮苯(AAAB)的共聚物。以5(6)-羧基荧光素(5(6)-CF)为水溶性标记物,研究了共聚物包覆的小单层脂质体(small unilamellar vesicles,SUV)在室温25℃时的释放行为。研究发现,在波长大于350nm的光源照射下,共聚物包覆的脂质体中5(6)-CF的释放速率明显提高,证明侧链含有偶氮苯基的水溶性共聚物包覆的脂质体具有明显的光控释放性能。并对此现象作了讨论。     

Design of liposomes containing photopolymerizable phospholipids for triggered release of contents

We describe a novel class of light-triggerable liposomes prepared from a photo-polymerizable phospholipid DC_8,9PC (1,2-bis (tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) and DPPC (1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine). Exposure to UV (254 nm) radiation for 0–45 min at 25 °C resulted in photo-polymerization of DC_8,9PC in these liposomes and the release of an encapsulated fluorescent dye (calcein). Kinetics and extents of calcein release correlated with mol% of DC_8,9PC in the liposomes. Photopolymerization and calcein release occurred only from DPPC/DC_8,9PC but not from Egg PC/DC_8,9PC liposomes. Our data indicate that phase separation and packing of polymerizable lipids in the liposome bilayer are major determinants of photo-activation and triggered contents release.     

Lipid composition-dependent incorporation of multiple membrane proteins into liposomes

Membrane proteins from bacteria Pasteurella multocida were used as a model for studying its incorporation into liposomes. An important step to achieve efficient high yield protein incorporation in proteoliposomes is the study of the more suitable lipid composition. To this end, we compared the amount of total protein, reconstituted by co-solubilization methods, into liposomes of phospholipids with different polar head groups and acyl chain lengths. The liposomes and proteoliposomes were characterised by isopycnic centrifugation in sucrose gradient and by dynamic light scattering. Experimental and theoretical results were compared considering the effects exerted through the hydrocarbon chain length, volume, and optimal cross-sectional area of the phospholipid (combined in the geometrical critical packing parameter, lipid–protein matching), critical spontaneous radius of curvature of the bilayer vesicle, phase transition temperature of the lipid and ratio of lipid–protein molecules present in the vesicles. The highest incorporation of multiple proteins was found with dipalmitoylphosphatidylcholine (DPPC), reaching a yield of 93% compared to the lower relative amounts incorporated in proteoliposomes of the other lipids. The incorporation of multiple proteins induces a proportional enhancement of vesicular dimension, since DPPC–proteoliposomes have an average diameter of 1850 Å, compared to the 1430 Å for pure DPPC vesicles.     

Electron spin resonance studies of dipalmitoylphosphatidylcholine liposomes containing soybean-derived sterylglucoside

The effects of soybean-derived sterylglucoside (SG) on the fluidity of liposomal membrane composed of dipalmitoylphosphatidylcholine (DPPC) were investigated compared with those of soybean-derived sterol (SS) and cholesterol (Ch) using an electron spin resonance spectrometer. Three kinds of liposomes were prepared in the molar ratio of DPPC/X=7/4, where X is SS, Ch or SG. The fluidity close to the polar head groups increased with an increase of temperature in the DPPC membrane containing SS, Ch and SG in the range 35 to 45 degrees C. Those near the hydrophobic end changed with an increase in temperature in liposomes containing SS, Ch and SG, which had a fluidizing effect on the DPPC membrane below the transition temperature (Tm, 41.9 degrees C) and a condensing effect over the Tm. The fluidizing effects of these compounds around 37 degrees C near the polar head group and the hydrophobic end increased in the following order: Ch < SG < or = SS and SS < Ch < SG, respectively. SG increased the fluidity of liposomal membrane dramatically above the Tm (35.4 degrees C). These results suggest that the high fluidity close to the hydrophobic end of the liposomal membranes around 37 degrees C, the decrease of Tm, and the sigmoidal nature of fluidity vs. temperature are important factors in the effectiveness of liposomes containing SG as a carrier of drugs.     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.