单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

Property modification of poly(methyl methacrylate) through copolymerization with fluorinated aryl methacrylate monomers

Copolymers of methyl methacrylate (MMA) with 2,3,5,6‐tetrafluorophenyl methacrylate (TFPMA), pentafluorophenyl methacrylate (PFPMA), and 4‐trifluoromethyl‐2,3,5,6‐tetrafluorophenyl methacrylate (TFMPMA) were investigated. All the three systems showed a random copolymerization character. The composition, glass transition temperature (T_g), and refractive index of the copolymers obtained were studied. T_gs of TFPMA/MMA and PFPMA/MMA copolymers were found to deviate positively from the Gordon–Taylor equation. However, T_gs of TFMPMA/MMA copolymers were well fit with the Gordon–Taylor equation. These results indicated the existence of interaction between MMA and either TFPMA or PFPMA units in copolymers. This interaction resulted in the enhancement of the T_g of MMA polymers through the copolymerization with TFPMA and PFPMA. The refractive index and the light transmittance of copolymers were close to those of PMMA. Copyright © 2007 John Wiley & Sons, Ltd.     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Poly(methyl methacrylate) copolymers containing multiple,pendent plasticizing groups

New ether dimer (ED‐Eh) and diester (EHDE) derivatives of α‐(hydroxymethyl)acrylate, each having two 2‐ethylhexyl side chains, and an amine‐linked di(2‐ethylhexyl)acrylate (AL‐Eh), having three 2‐ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, T_g. The free radical polymerizations of these monomers yielded high‐molecular–weight polymers. Cyclopolymer formation of ED‐Eh and AL‐Eh was confirmed by ¹³C NMR analysis and the cyclization efficiencies were found to be very high (～100%). Copolymers of ED‐Eh, EHDE, and AL‐Eh with methyl methacrylate (MMA) showed significant T_g decreases over poly(methyl methacrylate) (PMMA) due to 2‐ethylhexyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of 2‐ethylhexyl methacrylate, ED‐Eh, EHDE, and AL‐Eh with MMA revealed that the impacts of these monomers on depression of T_g's are identical with respect to the total concentration of the pendent groups. This is consistent with an earlier study involving copolymers of monomers comprising one and two octadecyl side groups with MMA. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the 2‐ethylhexyl pendent groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2302–2310, 2010     

Emulsion polymerization of methyl methacrylate under pulsed microwave irradiation

Emulsion polymerization of methyl methacrylate (MMA) under pulsed microwave irradiation (PMI) with higher peak pulse power was studied. The effects of various parameters of PMI on the polymerization were analyzed and compared with that under conventional heating (CH) process. The results were summarized, as compared with that under CH, as follows. The amount of initiator used to reach constant conversion reduced by 50% at the same polymerization time; at the same initiator concentration 0.15 and 0.2 wt.%, the polymerization rate increased by 131% and 163%, respectively. The molecular weight of polymer obtained was 1.1-2.0 times larger than that under CH; at the same irradiation energy, the conversion achieved using a lower pulse power was greater than that using a higher pulse power. There seemed to be a factor of the irradiation energy efficiency; in other words, for the monomer conversion, the irradiation energy of low pulse power had a higher efficiency. The conversion achieved using a 3.5 μs pulse width was almost the same as that using a 1.5 μs pulse width. The results indicated that PMI had a significant non-thermal effect on the emulsion polymerization of MMA so as to effectively enhance the polymerization rate. The glass transition temperature (T_g), the polydispersity index (PDI) and the regularity of the polymer obtained using two processes were similar, indicating that the physical properties and microstructure of the polymer were not modified by the use of microwaves.     

Synthesis and characterization of graft copolymers of methacrylonitrile/methacrylate mixtures onto amylomaize by the ceric ion method

Graft polymerizations of mixtures of methacrylonitrile with n-alkyl methacrylales onto amylomaize were carried out. The graft copolymers were characterized by both IR and ¹³C-NMR spectroscopies. The influence of the monomer feed on the grafting parameters has been studied. The variation of these parameters with the mole fraction of methacrylate in the feed for the first three systems studied, MAN/MMA, MAN/EMA and MAN/BMA, was similar: thus, percent grafting (%G, percent weight of grafted polymer with respect to grafted amylomaize), percent grafted amylomaize (%GA, percent weight of grafted amylomaize with respect to initial amylomaize), percent grafting conversion (%C_g, percent weight of grafted polymer with respect to initial monomer), and percent total conversion (%C_t, percent weight of total acrylic polymer with respect to initial monomer) were increased, but percent grafting efficiency (%GE, percent weight of graft copolymer with respect to total polymer) decreased. The system MAN/HMA presented values of grafting parameters lower than those of the previous systems. The optimum values were obtained at 0.6 HMA mole fraction in the monomer feed. When the number of carbon atoms of the n-alkyl group rises from 1 to 4, the increase of the n-alkyl group length gives rise to increases of the %G %C_g and %C_t values and decreases of the %GE and %GA values. For the largest methacrylate, the grafting reaction appears to be controlled by the lesser accessibility of the monomer to the active sites of the carbohydrate. © 1992 John Wiley & Sons, Inc.     

Semibatch emulsion polymerization of methyl methacrylate using different polyurethane particles

Aqueous acrylic‐polyurethane (AC–PU) hybrid emulsions were prepared by semibatch emulsion polymerization of methyl methacrylate (MMA) in the presence of four polyurethane (PU) dispersions. The PU dispersions were synthesized with isophorone diisocyanate (IPDI), 1000 and 2000 molecular weight (MW) poly(neopentyl) adipate, 1000 MW polytetramethyleneetherglycol, butanediol (BD), and dimethylol propionic acid (DMPA). MMA was added in the monomer emulsion feed. We studied the effect of the use of different PU seed particles on the rate of polymerization, the particle size and distribution, the number of particles, and the average number of radicals per particle. The PU rigidity was controlled by varying the polyol chemical structure, the polyol MW (M_n), and by adding BD. The monomer feed rate was varied to study its influence on the process. It was observed that the PU particles that had been prepared with a higher MW polyol swelled better with MMA before the monomer‐starved conditions occurred. There seemed to be no significant discrepancies between the series with different PU seeds in the monomer‐starved conditions. The overall conversion depended on the monomer addition rate, and the polymerization rate acquired a constant value that was comparable to the value of the monomer addition rate. The instantaneous conversion increased slightly. The average particle size increased, and the total particle number in the reactor was constant and similar to the number of PU particles in the initial charge. The average number of radicals per particle increased. The differences between the system with a constant particle number and average number of radicals per particle and the system with a fixed radical concentration are discussed. The semibatch emulsion polymerization of MMA in the presence of PU particles studied was better compared to the system with a fixed radical concentration. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 844–858, 2005     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Kinetics of dispersion polymerization: Effect of medium composition

The effect of the medium composition (monomer and solvent) on the kinetics of dispersion polymerization of methyl methacrylate (MMA) was studied via reaction calorimetry. It was found that increasing the monomer concentration increased the reaction rate; the exponent of the dependency of the initial reaction rate on the MMA concentration was found to be 0.93. Narrow particle size distributions were achieved at the lower monomer concentrations (0.24–0.81 mol/L) and a minimum size (2.45 μm) was found at an intermediate concentration (0.44 mol/L). The average molecular weight of the PMMA increased and the molecular weight distribution broadened with increasing monomer concentration. During a dispersion polymerization, the MMA concentration was found to decrease linearly with conversion in both phases, whereas the ratio of concentrations in the particles and continuous phase ([M]_p/[M]_c) remained constant (0.47) with partitioning favoring the continuous phase. The average number of free radicals per particle in MMA dispersion polymerization was estimated to be high from the nucleation stage onward (>5000). The increasing rate during the first ～ 40% conversion was primarily caused by the increasing volume of the polymer particle phase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3638–3647, 2008     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Grafting of methyl methacrylate onto natural rubber in supercritical carbon dioxide

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber (NR) was carried out by supercritical carbon dioxide (scCO₂) swelling polymerization with benzoyl peroxide (BPO) as an initiator. Fourier transform–infrared spectroscopy (FT–IR) was used to confirm the formation of graft copolymers with the characteristic bands of symmetric C?O and C? O? C stretching vibrations at 1728 cm^?1 and 1147 cm^?1, respectively. The effects of the rubber‐to‐monomer ratio, amount of initiator, reaction time, and pressure on the monomer grafting level (GL) and grafting efficiency (GE) were investigated, and the optimum conditions for the preparation of NR‐g‐MMA were found to be 70:30 of the rubber‐to‐monomer ratio, 1.2% of the initiator content, and the reaction pressure of 23 MPa for 6 h. The thermal behavior of the NR and the different NR/MMA molar ratio grafted copolymer samples was studied by differential scanning calorimetry (DSC). The observed glass transition temperature (T_g) was consistent with the GL. The tensile strength, modulus of elasticity, elongation at break, hardness, and oil resistance of graft copolymers were determined and compared with the values of NR and that of polymerization products prepared in traditional toluene solution. The results showed that the tensile strength, modulus of elasticity, hardness and oil resistance were greatly improved after modification in scCO₂. Copyright © 2007 John Wiley & Sons, Ltd.     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Orientation and relaxation in uniaxially stretched styrene-co-methyl methacrylate random copolymers

Orientation and relaxation behavior in uniaxially stretched styrene-co-methyl methacrylate random copolymers was investigated. When compared at a reference temperature T = T_g + constant, orientation of methyl methacrylate units (MMA) decreases while styrene units orientation increases with a decrease in the styrene percentage. This behavior can be related to intermolecular interactions between MMA units and to the stiffness of styrene-MMA units, which do not undergo conformational changes upon stretching. Both monomer units relax the same in a given copolymer and chain relaxation increases when the styrene percentage increases. Orientation relaxation of styrene and MMA units can be reduced to two general relaxation master curves whatever the blend composition, when the results are compared at same monomeric friction coefficient. © 1994 John Wiley & Sons, Inc.     

Poly(phenyl methacrylate) and poly(1‐naphthyl methacrylate) prepared in microemulsions

Phenyl methacrylate and 1‐naphthyl methacrylate were polymerized in microemulsions using stearyltrimethylammonium chloride, cetyltrimethylammonium bromide, and a mixture of nonionic Triton surfactants to form latexes that were 20–30 nm in diameter. A temperature of 70 °C was needed to obtain polymers using thermal initiation. The tacticities of poly(phenyl methacrylate) (PPhMA) (55% rr) and poly(1‐naphthyl methacrylate) (P‐1‐NM) (47% rr) were the same as those of the polymers prepared in toluene solutions. The weight average molecular weights were 1 × 10⁶ and 5 × 10⁵ g/mol for PPhMA and P‐1‐NM prepared in microemulsions with very broad distributions. PPhMA samples from microemulsions and solution had the same T_g = 127 °C. P‐1‐NM from microemulsions had T_g = 145–147 °C compared with T_g = 142 °C for P‐1‐NM from solution. The molecular weights and the glass‐transition temperatures of both PPhMA and P‐1‐NM from microemulsions are substantially higher than any previously reported. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 519–524, 2001     

Synthesis, characterization and properties of a novel fluorinated methacrylate polymer

A fluorinated monomer of 2-(2,2,2-trifluoroethoxy)ethyl methacrylate (FEMA) was prepared by a “one pot” process and then a novel fluorinated methacrylate polymer, poly[2-(2,2,2-trifluoroethoxy)ethyl methacrylate] (PFEMA), was successfully synthesized via miniemulsion polymerization using cetyltrimethyl ammonium bromide (CTAB) as emulsifier, hexadecane (HD) as co-stabilizer and 2,2′-azobisisobutyronitrile (AIBN) as initiator. The chemical structure of PFEMA was characterized by FT-IR, ¹H NMR and ¹⁹F NMR. GPC results show that the number average molecular weight (M_n) of PFEMA was as high as 8.5 × 10⁵ g/mol and the polydispersity index (PDI) was only 1.3. SEM and DLS characterizations showed that the morphology of PFEMA latex was uniform spheres with the diameter of about 110–125 nm. It was also found that PFEMA has high thermo-stability (T_d > 200 °C), low glass transition temperature (T_g = 13.0 °C), and nice hydrophobicity (θ_water = 99.9°). Comparison studies on PFEMA and poly(2,2,2-trifluoroethyl methacrylate) show that an introduced functional group (–CH₂CH₂O–) has a significant effect on lowering T_g and improving hydrolysis resistance without impairing surface properties.     

Anionic polymerization of methyl methacrylate initiated with molybdenum and tungsten chloride/organolithium/triisobutylaluminum systems

Molybdenum chloride (MoCl₅ or 1a ) and tungsten chloride (WCl₆ or 1b )/phenyllithium (PhLi)/triisobutylaluminum (iBu₃Al) systems were found to be quite effective for controlling the anionic polymerization of methyl methacrylate (MMA), affording high molecular weight poly(methyl methacrylate)s (PMMAs; number‐average molecular weight > 100,000) with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.25) quantitatively at 0 °C for 1 h in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of PMMAs obtained with the 1a and 1b /organolithium (RM; n‐butyllithium, PhLi)/iBu₃Al systems revealed that the initiation of MMA with the systems occurred by a nucleophilic attack of H^? to the monomer. In addition, the MALDI‐TOF MS analyses indicated that the presence of iBu₃Al was responsible for the controlled polymerization by improving the uniformity of the polymerization with respect to initiation and termination and by preventing a backbiting reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4302–4315, 2002     

Dependence of the glass transition temperature of poly(methyl methacrylate) on tacticity and molecular weight

The preparation of five samples of poly(methyl methacrylate) covering a wide range of tacticity and their electron irradiation to produce series of varying molecular weight are described. The glass transition temperature T_g of each polymer was determined by DTA techniques. Plots of T_g and the reciprocal of the molecular weight are well fitted in every case by a straight line. The data are also fitted to the Gibbs-DiMarzio theory and the values of the energy and free-volume parameters obtained are discussed. A method of estimating T_g of pure syndiotactic poly(methyl methacrylate) by extrapolation is presented, the value obtained being 160°C.     

Glass Transition Temperatures of Poly[(methyl methacrylate)‐co‐(butyl acrylate)]s Synthesized by Atom‐Transfer Radical Polymerization

Glass transition temperatures T_g of methyl methacrylate/butyl acrylate copolymers obtained by means of atom‐transfer radical polymerization are measured using differential scanning calorimetry. Due the nature of this polymerization method an increase in molecular weight is produced as the reaction progresses, which gives rise to an increase in T_g. Simultaneously, a composition gradient with the enrichment of butyl acrylate causes a decrease in T_g. These opposite effects almost compensate each other and, therefore, no influence on the molecular weight at M̄_n < 10000 is found. This fact allows the application of the Johnston's equation and the Mayo‐Lewis terminal model to describe and predict the variation in T_g with copolymer conversion for the copolymers and under the experimental conditions investigated.     

A novel approach toward the prediction of the glass transition temperature: Application of the EVM model,a designer QSPR equation for the prediction of acrylate and methacrylate polymers

We describe an original QSPR model called the EVM model (Energy, Volume, Mass) to calculate the glass transition temperature (T_g) of aliphatic acrylate and methacrylate homopolymers using classical molecular mechanics and dynamics. The latter was used to calculate an energy density function related to the cylindrical volume of a 20 monomer unit polymer segment (TSSV, Total Space around a Standard deviation Volume). We then calculated the T_g as a function of this density function and the repeat unit molecular weight, although no interchain interactions were taken into account. For linear and branched aliphatic acrylate and methacrylate polymers, the standard deviation from linear regression was 12 K, and the r² was 0.96. The model allows calculation of the T_g with an average absolute error of error of 10% for linear and branched derivatives not included in the original linear regression analysis. The results obtained with the EVM model are compared with those obtained with Bicerano's model. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2579–2590, 1997     

Heterogeneity Features of Bulk Atom Transfer Radical Polymerization of Methyl Methacrylate in an Ampoule Reactor

Summary: This work demonstrated the severity of heterogeneity issues with ampoule reactors in bulk atom transfer radical polymerization of methyl methacrylate. The kinetic data of Cu^II concentration, monomer conversion, and polymer molecular weight varied from location to location along the ampoule. However, the polymer molecular weight versus conversion data from different locations fell into a single theoretical line. All locations except for the bottom part of the ampoule produced polymers having narrow molecular weight distribution.

Conversion versus time at different locations for the ATRP of MMA at 70 °C.