侧加热腔内的自然对流

开展侧加热腔内自然对流的研究具有重大的环境及工业应用背景. 总结侧加热腔内水平温差驱动的自然对流的最新研究进展, 并概述相应的流动性质、动力机制和传热特性以及对不同无量纲控制参数的依赖也有重要的科学价值. 已取得的研究结果显示突然侧加热的腔内自然对流的发展可包括初始阶段、过渡阶段和定常或准定常阶段. 不同发展阶段的流动依赖于瑞利数、普朗特数及腔体的高宽比, 且定常或准定常阶段的流态可以是定常层流流动、非定常周期性流动或者湍流流动. 此外, 回顾了对流流动失稳机制的研究成果以及湍流自然对流方面的新进展. 最后, 展望了侧加热腔内的自然对流研究的前景.      

Unsteady flow and heat transfer adjacent to the sidewall wall of a differentially heated cavity with a conducting and an adiabatic fin

The unsteady natural convection flow adjacent to the finned sidewall of a differentially heated cavity is numerically investigated through comparisons between the cases with a conducting fin and an adiabatic fin. The results show that the flow and temperature structures in the transition to a periodic flow induced by a conducting fin are considerably different from those by an adiabatic fin. Based on the present numerical results, the temporal development and spatial structures of the flow adjacent to the finned sidewall are described, and instabilities are characterized. It is found that the conducting fin improves the transient convective flows in the cavity and enhances heat transfer across the cavity (by up to 52% in comparison with the case without a fin).     

Experimental observations of the thermal flow around a square obstruction on a vertical wall in a differentially heated cavity

The transient thermal boundary layer flow around a square obstruction placed at the middle of the hot wall in a differentially heated cavity is visualized using a shadowgraph technique. The results show that the thermal boundary layer flow, which is blocked by the obstruction, firstly forms an intrusion head under the obstruction (the lower intrusion head). Subsequently, the lower intrusion head bypasses the obstruction and reattaches to the down-stream boundary. During the reattachment process, a more complicated flow is induced, and eventually both the lower intrusion head and the thermal boundary layer destabilize. After the lower intrusion head is convected away, the thermal boundary layer flow re-stabilizes. At the quasi-steady state, the thermal boundary layer forms a double-layer structure, which is split into two sections by the obstruction. It is demonstrated that both the transient processes and the quasi-steady state flow structures of the thermal boundary layer are significantly altered by the obstruction in comparison with the case without the obstruction.     

Transient natural convection in a cavity with heat input and a constant temperature wall on opposite sides

The transient natural convection of a fluid with Prandtl number of order 200 in a two-dimensional square cavity has been numerically studied. One of the vertical walls of the cavity is kept at a constant (ambient) temperature and a constant heat flux is applied on the opposite wall. The other walls are adiabatic. Initially, a boundary layer is formed near the heated wall; subsequently, a large vortical structure is generated, together with an upper intrusion layer. As time progresses, the average temperature in the cavity increases, and a descending boundary layer is formed near the constant temperature wall. During the transition to the steady-state regime, a thermal stratification pattern is formed. The results are compared with the scale analysis presented by Patterson and Imberger (1980).     

Experiments on turbulent natural convection in an enclosed tall cavity

Experiments have been undertaken to investigate the natural convection of air in a tall differentially heated rectangular cavity (2.18 m high by 0.076 m wide by 0.52 m in depth). They were performed with temperature differentials between the vertical plates of 19.6°C and 39.9°C, giving Rayleigh numbers based on the width of 0.86×10⁶ and 1.43×10⁶. Under these conditions the flow in the core of the cavity is fully turbulent and property variations with temperature are comparatively small. A previously used experimental rig has been modified, by fitting partially conducting top and bottom walls and outer guard channels, to provide boundary conditions which avoid the inadequately defined sharp changes in temperature gradient and other problems associated with insufficient insulation on nominally adiabatic walls. Mean and turbulent temperature and velocity variations within the cavity have been measured, together with heat fluxes and turbulent shear stresses. The temperature and flow fields were found to be closely two-dimensional, except close to the front and back walls, and anti-symmetric across the diagonal of the cavity. The partially conducting roof and floor provide locally unstable thermal stratification in the wall jet flows there, which enhances the turbulence as the flow moves towards the temperature controlled plates. The results provide a greatly improved benchmark for the testing of turbulence models in this low turbulence Reynolds number flow.     

Natural convection in an inclined quadrantal cavity heated and cooled on adjacent walls

Natural convective flow and heat transfer in an inclined quadrantal cavity is studied experimentally and numerically. The particle tracing method is used to visualize the fluid motion in the enclosure. Numerical solutions are obtained via a commercial CFD package, Fluent. The working fluid is distilled water. The effects of the inclination angle, ? and the Rayleigh number, Ra on fluid flow and heat transfer are investigated for the range of angle of inclination between 0° ? ? ? 360°, and Ra from 10⁵ to 10⁷. It is disclosed that heat transfer changes dramatically according to the inclination angle which affects convection currents inside, i.e. flow physics inside. A fairly good agreement is observed between the experimental and numerical results.     

Laminar natural convection in a partially divided rectangular cavity at high Rayleigh number

Finite element predictions of two-dimensional laminar natural convection in a partially divided rectangular cavity at high Rayleigh number are presented. The walls are differentially heated, the horizontal surfaces are insulated and the cavity contains a partial vertical divider which is centrally located and whose height is varied. Detailed results are presented for an aluminium half-divider in water for Rayleigh number up to 10¹¹ and compared directly with recent experiments in a cavity of aspect ratio 1/2. The predicted flow and heat transfer are in good agreement with the measurements and confirm the existence of a high Rayleigh number regime with characteristic behaviour that differs significantly from that found at lower Rayleigh number. In addition, the effects of the divider height, the divider conductivity, the fluid Prandtl number and the cavity aspect ratio are studied. The results show that a direct simulation of the complex flow and heat transfer that occurs in partially divided cavities is possible for realistic physical conditions.     

Laminar fluid convection between concentric and eccentric heated horizontal rotating cylinders for low-Prandtl-number fluids

Numerical experiments are performed to study rotational effects on the mixed convection of low-Prandtlnumber fluids enclosed between the annuli of concentric and eccentric horizontal cylinders. The inner cylinder is assumed to be heated and rotating. The rotational Reynolds number considered is in the range where the effect of Taylor vortices is negligible. The Prandtl number of the fluid considered is in the range 0·01–1·0. The Rayleigh number considered is up to 10⁶. A non-uniform mesh transformation technique coupled with the introduction of ‘false transient’ parameters to the vorticity and streamfunction-vorticity expressions was used to solve the governing set of equations. Results show that when the inner cylinder is made to rotate, the multicellular flow patterns observed in stationary cylindrical annuli subside in a manner depending on the Prandtl number of the fluids. Eventually the flow tends toward a uniform flow similar to that of a solid body rotation. For a fixed Rayleigh number and with a Prandtl number of the order of 1·0, when the inner cylinder is made to rotate, the mean Nusselt number is observed to decrease throughout the flow. For lower Prandtl number of the order 0·1–0·01 the mean Nusselt number remained fairly constant when the inner cylinder was made to rotate. The mean Nusselt numbers obtained were also compared with available data from other investigators.     

Double diffusive convection of anomalous density fluids in a porous cavity

A numerical study has been performed to analyze the combined effect of temperature and species gradients on the buoyancy-driven natural convection flow of cold water near its density extremum contained in a porous cavity. The governing equations are descretized using the finite volume method. The results of the investigation are presented in the form of steady-state streamlines, velocity vectors, isotherms, and isoconcentrationlines. The results are discussed for different porosities, Darcy numbers, and Grashof numbers. The heat and mass transfer rates calculated are found to behave nonlinearly with hot wall temperature. The heat and mass transfer are increased with increasing Darcy number and porosity. It is found that the convective heat and mass transfer rate are greatly affected by the presence of density maximum.     

Non-linear approximations for natural convection in a horizontal annulus

Two different problems are proposed as approximations of the usual system modelling natural convection under the Oberbeck-Boussinesq assumptions. The error is evaluated by means of the norm of its gradient in the Hilbert space. The average Nusselt number is also estimated.     

Transient natural convection in a rectangular enclosure with one heated side wall

This paper describes a numerical and theoretical study of the transient natural convection heating of a two-dimensional rectangular enclosure filled with fluid. The heating is applied suddenly along one of the side walls, while the remaining three walls are maintained insulated. It is shown that the process has two distinct phases, an early period dominated by conduction and a late period dominated by convection. The scaling laws for the heat transfer rate and the effectiveness (energy storage fraction) are determined based on scale analysis. These theoretical results are confirmed by numerical experiments conducted in the domain Ra = 10³−10⁶, Pr = 7, A = 1, where Ra is the Rayleigh number based on height and initial temperature difference, Pr is the Prandtl number, and A is the height/length ratio of the enclosure. Correlations for heat transfer rate and effectiveness are constructed by comparing the theoretical scaling laws with the numerical results.     

Adjoint optimization of natural convection problems: differentially heated cavity

Optimization of natural convection-driven flows may provide significant improvements to the performance of cooling devices, but a theoretical investigation of such flows has been rarely done. The present paper illustrates an efficient gradient-based optimization method for analyzing such systems. We consider numerically the natural convection-driven flow in a differentially heated cavity with three Prandtl numbers (\(Pr=0.15{-}7\)) at super-critical conditions. All results and implementations were done with the spectral element code Nek5000. The flow is analyzed using linear direct and adjoint computations about a nonlinear base flow, extracting in particular optimal initial conditions using power iteration and the solution of the full adjoint direct eigenproblem. The cost function for both temperature and velocity is based on the kinetic energy and the concept of entransy, which yields a quadratic functional. Results are presented as a function of Prandtl number, time horizons and weights between kinetic energy and entransy. In particular, it is shown that the maximum transient growth is achieved at time horizons on the order of 5 time units for all cases, whereas for larger time horizons the adjoint mode is recovered as optimal initial condition. For smaller time horizons, the influence of the weights leads either to a concentric temperature distribution or to an initial condition pattern that opposes the mean shear and grows according to the Orr mechanism. For specific cases, it could also been shown that the computation of optimal initial conditions leads to a degenerate problem, with a potential loss of symmetry. In these situations, it turns out that any initial condition lying in a specific span of the eigenfunctions will yield exactly the same transient amplification. As a consequence, the power iteration converges very slowly and fails to extract all possible optimal initial conditions. According to the authors’ knowledge, this behavior is illustrated here for the first time.     

MHD natural convection flow and heat transfer in a laterally heated partitioned enclosure

This study looks at MHD natural convection flow and heat transfer in a laterally heated enclosure with an off-centred partition. Governing equations in the form of vorticity–stream function formulation are solved using the polynomial differential quadrature (PDQ) method. Numerical results are obtained for various values of the partition location, Rayleigh, Prandtl and Hartmann numbers. The results indicate that magnetic field significantly suppresses flow, and thus heat transfer, especially for high Rayleigh number values. The results also show that the x-directional magnetic field is more effective in damping convection than the y-directional magnetic field, and the average heat transfer rate decreases with an increase in the distance of the partition from the hot wall. The average heat transfer rate decreases up to 80% if the partition is placed at the midpoint and an x-directional magnetic field is applied. The results also show that flow and heat transfer have little dependence on the Prandtl number.     

Quasi-periodicity and chaos in a differentially heated cavity

Convective flows of a small Prandtl number fluid contained in a two-dimensional vertical cavity subject to a lateral thermal gradient are studied numerically. The chosen geometry and the values of the material parameters are relevant to semiconductor crystal growth experiments in the horizontal configuration of the Bridgman method. For increasing Rayleigh numbers we find a transition from a steady flow to periodic solutions through a supercritical Hopf bifurcation that maintains the centro-symmetry of the basic circulation. For a Rayleigh number of about ten times that of the Hopf bifurcation, the periodic solution loses stability in a subcritical Neimark–Sacker bifurcation, which gives rise to a branch of quasiperiodic states. In this branch, several intervals of frequency locking have been identified. Inside the resonance horns the stable limit cycles lose and gain stability via some typical scenarios in the bifurcation of periodic solutions. After a complicated bifurcation diagram of the stable limit cycle of the 1:10 resonance horn, a soft transition to chaos is obtained. PACS 44.25.+f, 47.20.Ky, 47.52.+j     

Natural convection flow of a viscous incompressible fluid in a rectangular porous cavity heated from below with cold sidewalls

We consider the flow, which is induced by differential heating on the boundaries of a porous cavity heated from below. In particular we allow the sidewalls to have the same cold temperature as the upper surface, and thus the problem is a variant of the Darcy-Bénard convection problem, but one where there is flow at all non-zero Grashof numbers. Attention is focused on how the flow and heat transfer is affected by variations in the cavity aspect ratio, the Grashof number and the Darcy number. The flow becomes weaker as the Darcy number decreases from the pure fluid limit towards the Darcy-flow limit. In addition the number of cells which form in the cavity varies primarily with the aspect ratio and is always even due to the symmetry imposed by the cold sidewalls.     

Interaction of mixed convection in two-sided lid driven differentially heated square enclosure with radiation in presence of participating medium

The current study addresses the mathematical modeling aspects of transport phenomena in steady, two-dimensional, laminar flow accompanied by heat transfer in a lid-driven differentially heated cavity in presence of radiatively absorbing, emitting and scattering gray medium. The walls of the enclosure are considered to be opaque, diffusive and gray. Mixed convection is the outcome of the interaction of forced convection induced by the moving vertical hot and cold wall with the natural convection induced due to the differentially heated enclosure. Two different orientations of the wall movement have been considered to simulate opposing and aiding mixed convection phenomenon and to study its interaction with radiation. Vorticity-stream function formulation of N–S equation has been employed. The discrete ordinate method has been used in modeling the radiative transport equation followed with finite volume method as discretisation technique. The effect of influencing parameters on fluid flow and heat transfer has been studied.     

Transient flow rate behaviour in an external natural convection boundary layer

A theoretical approach is proposed to investigate the transient dynamic behaviour of a free convection boundary layer-type flow. The set of continuity, momentum and energy equations are solved with the classical Boussinesq approximation using the Karman–Pohlhausen integral method. Applying a step variation of the uniform heat flux on a vertical wall, the boundary layer thickness and velocity profiles within the viscous layer, streamline patterns and volumetric flow rate are evaluated as a function of time. In addition, corresponding fully analytical asymptotic solutions are derived to be readily used in engineering applications.