共查询到20条相似文献,搜索用时 15 毫秒
1.
Shih‐Ying Yang 《国际流体数值方法杂志》2004,44(11):1163-1184
An adaptive strategy incorporating mesh remeshing and refining is developed to study the supersonic turbulent flow over a backward‐facing step on a mixed quadrilateral–triangular mesh. In the Cartesian co‐ordinate system, the unsteady Favre‐averaged Navier–Stokes equations with a low‐Reynolds‐number k–εturbulence model are solved using a locally implicit scheme with an anisotropic dissipation model. In the present adaptive strategy, two error indicators for both mesh remeshing and refining, respectively, are presented. The remeshing error indicator incorporates unified magnitude of substantial derivative of pressure and that of vorticity magnitude, whereas the refining error indicator incorporates unified magnitude of substantial derivative of pressure and that of weighted vorticity magnitude. To assess the present approach, the transonic turbulent flow around an NACA 0012 airfoil is performed. Based on the comparison with the experimental data, the accuracy of the present approach is confirmed. According to the high‐resolutional result on the adaptive mesh, the structure of backstep corner vortex, expansion wave and oblique shock wave is distinctly captured. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
2.
3.
A kinetic flux-vector-splitting method has been used to solve the Euler equations for inviscid, compressible flow on unstructured grids. This method is derived from the Boltzmann equation and is an upwind, cell-centered, finite volume scheme with an explicit time-stepping procedure. The Delaunay triangulation has been used to generate the grids. The approach is demonstrated for three flow field simulations, namely the subsonic flow over a two-component high-lift aerofoil, the transonic flow over an aerofoil and the supersonic flow in a channel. 相似文献
4.
预爆管技术被广泛地应用在爆轰波发动机的起爆过程中,但是在超音速来流中基于预爆管技术起始爆轰波的研究并未被广泛地开展。基于此,本文中数值研究了横向超音速来流对半自由空间内爆轰波的衍射和自发二次起爆、及管道内的衍射和壁面反射二次起爆两种现象的影响。数值模拟的控制方程为二维欧拉方程,空间上使用五阶WENO格式进行数值离散,采用带有诱导步的两步链分支化学反应模型。所模拟的爆轰波具有规则的胞格结构,对应于用惰性气体高度稀释过的可爆混合物中形成的爆轰波。结果表明:在半自由空间内,在本文所模拟的几何尺寸下,爆轰波并未成功发生二次起爆现象,但是爆轰波的自持传播距离随着横向超音速来流强度的增强而增加。在核心的三角形流动区域外,波面诱导产生了更多的横波结构;在管道内,横向的超音速来流在逆流侧对出口气流产生了压缩作用,能有效提高波面压力,因此反射后的激波压力也比较高。在同样的几何尺寸下,爆轰波在静止和超音速(Ma=2.0)气流中分别出现了二次起爆失败和成功两种现象,这是由于在超音速来流中化学反应面的褶皱诱导产生了横波结构,横波与管壁以及其他横波之间的碰撞提高了前导激波的强度,并最终促进了爆轰波在超声速流主管道内的成功起始。 相似文献
5.
Calculation of supersonic steady-state flow in axisymmetric nozzles with an upwind difference scheme
Huang Lanjie 《Acta Mechanica Sinica》1985,1(1):9-18
This paper is on the application of the upwind difference scheme proposed by the author[1] to the calculation of supersonic steady-state flow in axisymmetric nozzles. The upwind scheme is conservative (or weakly
conservative), it yields results approximating those from the characteristic relations, and it has corresponding boundary
difference schemes. The entropy phenomenon in the calculation of shock reflection on boundaries with the shock-capturing method
will be discussed and a correction of this phenomenon will be proposed. From numerical experiments on an arbitrary nozzle,
it is seen that the upwind difference scheme, its corresponding boundary scheme, and the improved treatment of shock reflection
work well for the calculation of supersonic steady-state flow in axisymmetric nozzles. 相似文献
6.
基于非结构网格系统,实现了时空三阶精度的TTGC有限元格式,并在三阶TTGC格式上发展了基于人工粘性的激波捕捉技术。在非结构网格下,采用这种方法对若干典型的超声速流动问题(SOD激波管、马赫数为3的前台阶流动以及马赫数为8的高超声速圆柱流动)进行了验证计算。结果表明,TTGC格式分辨率高,在粗糙网格下能够准确的模拟超声速流场中的激波、接触间断等复杂流动现象,并且能有效的控制间断附近的数值色散现象。与传统的有限体积方法相比,本文实现的TTGC有限元格式在模拟超声速流动问题方面具有格式精度高、数值耗散小等优点。 相似文献
7.
K. A. Dubrovin A. E. Zarvin V. V. Kalyada V. E. Khudozhitkov A. S. Yaskin 《Journal of Applied Mechanics and Technical Physics》2018,59(5):809-817
A possibility of using small-scale vacuum setups for experimental investigations of supersonic jets escaping from supersonic nozzles into vacuum or rarefied space is considered. Results of studying the structure of the secondary supersonic flow formed in supersonic jets with developed condensation, which is detected for the first time, are reported. The present investigations are carried out with the use of photometry and spectrometry of jets with the use of radiation excited by an electron beam; flow visualization is also performed. The results obtained in the study are analyzed; capabilities and specific features of various methods of flow registration are considered. An empirical model, which establishes the dependence between the detected secondary flow and the process of formation of large clusters in the flow, is developed and justified. 相似文献
8.
Y. KERGARAVAT F. JACON N. OKONG'O D. KNIGHT 《International Journal of Computational Fluid Dynamics》2013,27(2):179-196
A fully-implicit algorithm is developed for the two-dimensional, compressible, Favre-averaged Navier-Stokes equations. It incorporates the standard k-? turbulence model of Launder and Spalding and the low Reynolds number correction of Chien. The equations are solved using an unstructured grid of triangles with the flow variables stored at the centroids of the cells. A generalization of wall functions including pressure gradient effects is implemented to solve the near-wall region for turbulent flows using a separate algorithm and a hybrid grid. The inviscid fluxes are obtained from Roe's flux difference split method. Linear reconstruction of the flow variables to the cell faces provides second-order spatial accuracy. Turbulent and viscous stresses as well as heat transfer are obtained from a discrete representation of Gauss's theorem. Interpolation of the flow variables to the nodes is achieved using a second-order accurate method. Temporal discretization employs Euler, Trapezoidal or 3-Point Backward differencing. An incomplete LU factorization of the Jacobian matrix is implemented as a preconditioning method. The accuracy of the code and the efficiency of the solution strategy are presented for three test cases: a supersonic turbulent mixing layer, a supersonic laminar compression corner and a supersonic turbulent compression corner. 相似文献
9.
Yu. V. Tunik 《Fluid Dynamics》2014,49(5):688-693
The feasibility of steady detonation combustion of a hydrogen-air mixture entering at a supersonic velocity in an axisymmetric convergent-divergent nozzle with a central coaxial cylinder is considered. The problem of the nozzle starting and the initiation of detonation combustion is numerically solved with account for the interaction of the outflowing gas with the external supersonic flow. The modeling is based on the gasdynamic Euler equations for an axisymmetric flow. The calculations are carried out using the Godunov scheme on a fine fixed grid which allows one to study in detail the interaction of an oblique shock wave formed in the diffuser with the nozzle axis. It is shown that a central coaxial cylinder ensures the starting with the formation of supersonic flow throughout the entire nozzle and stable detonation combustion of a stoichiometric hydrogen-air mixture in the divergent section of the nozzle. 相似文献
10.
IntroductionForcomputationoftheviscouscompressibleflowstheNavier_Stokesequationsaregenerallyrepresentedintheconservationlawformasahyperbolicsystem .Lackingthemathematicaltooltoanalyzethisnonlinearsystem ,thenumericalmethodsusedinsolvingthenonlinearhype… 相似文献
11.
Problems of the deceleration of a supersonic conducting flow by a magnetic field are investigated. A conducting gas flow in a circular tube is considered in the presence of an axisymmetric magnetic field induced by a unit current loop or solenoid of finite length. The analysis is carried out on the basis of both the Euler equations (inviscid gas) and the complete system of Navier-Stokes equations for laminar viscous gas flow and turbulent flow using a one-parameter turbulence model. The numerical simulation is based on an implicit relaxation finite-difference scheme which is a modification of the Godunov method. The total pressure losses are determined for various values of the magnetohydrodynamic (MHD) interaction, the initial Mach number, and different magnetic field geometries and it is shown that the irreversible losses are significant in MHD supersonic flow deceleration. 相似文献
12.
超声速钝体逆向喷流减阻的数值模拟研究 总被引:1,自引:0,他引:1
为研究逆向喷流技术对超声速钝体减阻的影响,采用标准k-ε湍流模型,通过求解二维Navier-Stokes方程对超声速球头体逆向冷喷流流场进行了数值模拟,并着重分析了喷口总压、喷口尺寸对流场模态和减阻效果的影响。计算结果显示:随着喷流总压的变化,流场可出现两种流动模态,即长射流穿透模态和短射流穿透模态;喷流能使球头体受到的阻力明显减小;存在最大减阻临界喷流总压值(在所研究参数范围内最大减阻可达51.1%);在其它喷流物理参数不变时,随着喷口尺寸的增大,同一流动模态下的减阻效果下降。本文的研究对超声速钝体减阻技术在工程上的应用具有一定的参考价值。 相似文献
13.
The interaction of supersonic jets with external acoustic waves is investigated in connection with the emission of sound of discrete frequency by the jets. A plausible physical scheme explaining the appearance and maintenance of the oscillations of supersonic jets with discrete frequency was proposed in [1]. A model problem of the effect of pressure perturbations of a given frequency, traveling along the surface of a two-dimensional jet is also investigated there. The results of the solution of this problem (in particular, the presence of critical frequencies at which the perturbations in the jet grow indefinitely in the direction of motion of the flow) substantiate the hypothesis that by virtue of its periodic (cellular) structure a supersonic jet has the properties of a resonator. In [1] the more general problem of interaction of a supersonic jet with an external acoustic field is also formulated, which is in complete correspondence with the physical scheme of the phenomena developed in that article. In the present work this problem is solved in its complete form for plane and cylindrical jets for symmetric and antisymmetric perturbations in an external acoustic field, and also in the presence of subsonic accompanying flow in the outer medium.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 105–113, March–April 1974. 相似文献
14.
A scheme is proposed which simplifies the algorithm and reduces the labor involved in solving the system of quasi-linear hyperbolic equations describing supersonic nonequilibrium two-phase flow in an axisymmetric nozzle. 相似文献
15.
本文采用Galerkin有限元方法以全位势方程为控制方程计算了航天机三维简化模型的亚声速流动。为模拟实际流动,在后部加一尖劈形后体,并拖出一尾涡面。为局部超场 速区解的稳定,采用人工密度修正。对密度和环量进行双重迭代,得到了亚声速下三维航天机的压分分布和气动力系数。 相似文献
16.
P. Glaister 《国际流体数值方法杂志》1988,8(9):1095-1105
A finite difference scheme based on flux difference splitting is presented for the solution of the two-dimensional Euler equations of gas dynamics in a generalized co-ordinate system. The scheme is based on numerical characteristic decomposition and solves locally linearized Riemann problems using upwind differencing. The decomposition is for a generalized co-ordinate system and a convex equation of state. This ensures good shock-capturing properties when incorporated with operator splitting and the advantage of using body-fitted co-ordinates. The resulting scheme is applied to supersonic flow of real air' past a circular cylinder. 相似文献
17.
Implicit large eddy simulation of a supersonic flat-plate boundary layer flow by weighted compact nonlinear scheme 总被引:1,自引:0,他引:1
The performance of implicit large eddy simulation (ILES) of a supersonic flat-plate turbulent boundary layer flow by weighted compact nonlinear scheme (WCNS) has been investigated. In view of features of WCNS and ILES, it was expected that ILES by WCNS could be an efficient approach to perform LES of supersonic turbulent flows. The flowfield calculated by WCNS was of lower turbulent intensity compared with an explicit LES data obtained by a numerical scheme of the same order of accuracy on a computational grid of similar resolution. It was concluded that the numerical dissipation inherent in WCNS is so large that applying WCNS to ILES of this flowfield is inefficient compared with explicit LES. 相似文献
18.
The baseline numerical procedure of interest in this study combines flux vector splitting, flux difference splitting and an explicit treatment of the diffusion terms of the flow equations. The viscous terms are treated explicitly to preserve the wave propagation properties of the Euler fluxes and permit splitting. The experience with this scheme has been limited to laminar or, at best, ‘eddy viscosity’ flows. In this paper the applicability of the scheme is extended to include the calculation of turbulent Reynolds stresses in supersonic flows. The schemes and our implementation are discussed. Both laminar and turbulence subsets of the Reynolds/Favre-averaged equations are tested, with a discussion of relative performance. The test problem for turbulence consists of a zero-pressure-gradient supersonic boundary layer as well as a supersonic boundary layer experiencing the combined effects of adverse pressure gradient, bulk compression and a concave streamline curvature. Excellent agreement with experimental measurements is observed for most of the quantities compared, which suggests that the numerical procedures presented in this paper are potentially very useful. 相似文献
19.
In this paper, numerical simulation of three-dimensional supersonic flow in a duct is presented. The flow field in the duct is complex and can find its applications in the inlet of air-breathing engines. A unique streamwise marching Lagrangian method is employed for solving the steady Euler equations. The method was first initiated by Loh and Hui (1990) for 2-D steady supersonic flow computations and then extended to 3-D computation by the present authors Loh and Liou (1992). The new scheme is shown to be capable of accurately resolving complicated shock or contact discontinuities and their interactions. In all the computations, a free stream of Mach numberM=4 is considered.This article was processed using Springer-Verlag TEX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society. 相似文献
20.
A. P. Makasheva A. Zh. Naimanova 《Journal of Applied Mechanics and Technical Physics》2008,49(3):391-399
Results of a numerical study of three-dimensional supersonic jets propagating in a cocurrent flow are described. Averaged
parabolized Navier-Stokes equations are solved numerically on the basis of a developed scheme, which allows calculations in
supersonic and subsonic flow regions to be performed in a single manner. A jet flow with a cocurrent flow Mach number 0.05
⩽ M∞ ⩽ 7.00 is studied, and its effect on the structure of the mixing layer is demonstrated. The calculated results are compared
with available experimental and numerical data.
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 54–63, May–June, 2008. 相似文献