Synthesis of aromatic polythers by Scholl reaction. IV. Homopolymerization and copolymerization of α,ω-bis[4-(1-napthoxy)phenylsulfonyl]perfluoroalkanes

Polyether sulfones containing perfluoroalkyl segments were prepared by room temperature radical-cation polymerization (Scholl reaction) of 1,4-bis[4-(1-napthoxy)phenylsulfonyl]perfluorobutane ( 1a ) and 1,8-bis [4-(1-napthoxy) phenylsulfonyl] perfluoroctane ( 1b ) in nitrobenzene, using anhydrous ferric chloride as oxident. The homopolymerization of 1a and of 1b performed under various polymerization conditions, resulted in polymers with number average molecular weight (M?_n) up to 33,000 and 38,000 g/mol, respectively. Copolymerization of the fluorinated monomers 1a with 1b , and either 1a or 1b with 4,4′-bis(1-naphthoxy) diphenyl sulfone ( 4 ) and 1,5-bis (1-naphthoxy) pentane ( 5 ) produced copolymers of M?_n up to 18,100 g/mol. The reactivity of the various monomers was discussed on the basis of the induction and resonance stabilization effects.     

Synthesis of aromatic polyethers by Scholl reaction. I. Poly(1,1′-dinaphthyl ether phenyl sulfone)s and poly(1,1′-dinaphthyl ether phenyl ketone)s

A novel synthetic method for the preparation of high molecular weight aromatic polyethers is presented. It consists in the Scholl reaction of di(1-naphthyl) ethers of aromatic derivatives exhibiting lower nucleophilicity and higher oxidation potential than the 1-naphthoxy groups. The examples described in this paper refer to the synthesis of aromatic polyether sulfones and aromatic polyether ketones by the polymerization of 4,4′-di(1-naphthoxy)diphenyl sulfone and respectively 4,4′-di(1-naphthoxy)benzophenone. Both polymerization reactions are performed at room temperature in nitrobenzene, using anhydrous FeCl₃ as catalyst, and apparently follow a “reactive intermediate polycondensation” polymerization mechanism.     

Synthesis of aromatic polyethers by scholl reaction. VIII. On the polymerizability of 1,5-bis(phenoxy)pentanes and 1,5-bis(phenylthio)pentane

The synthesis and the oxidative polymerization of 1,5-bis(phenoxy)pentane, 1,5-bis(phenoxy)pentane substituted with various electron-donating groups, and 1,5-bis(phenylthio)pentane is described. The polymers derived from methyl substituted 1,5-bis(phenoxy)pentane monomers contain diphenyl methane, 1,2-diphenylethane, and benzyl chloride structural units. The mechanism for the generation of these structural units is presented. It consists of the proton transfer reactions from the cation-radical propagating species and subsequent reactions of the resulting benzyl radicals. The polymerizability of monomers with 1,5-pentanedioxy group is lower than that of the monomers with diphenyl sulfone group. This dissimilarity was attributed to the difference between both the reactivity and the concentration of the cation-radical propagating species resulted from these two classes of monomers.     

Heat-curable polyaromatic keto-ether-sulfones. XIV. More polymers with 2,2′-diphenylethynyl-4,4′-diphenyl units and their rearrangement products

Polymers were prepared from 4,4′-diphenoxydiphenylsulfone, isophthaloyl dichloride, and bis-p-phenoxyphenyl-4,4′-(2,2′-dibromodiphenyl)ketone, 2,2′-dibromodiphenyl-4,4′-dicarbonyl dichloride, or bis-p-phenoxyphenyl-4,4′-(2,2′-diphenylethynyldiphenyl)ketone in Friedel-Crafts type of polymerization. Bromine groups were subsequently replaced with phenylacetylene residues, and the polymers were cured at high temperatures, with the apparent formation of benzanthracene linkages. Cured polymers exhibited higher softening points, decreased solubilities, and, in some instances, higher melting points than their uncured precursors. Significant weight losses occurred during isothermal aging tests.     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

Syntheses of multicyclic poly(ether sulfone)s from 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane and 4,4′‐bis(4‐chlorophenyl) sulfones

5,5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane (TTSBI) was polycondensed with 4,4′‐dichlorodiphenyl sulfone (DCDPS) or with 4,4′‐bis(4‐chlorophenyl sulfonyl) biphenyl (BCSBP) in DMSO. Concentration and feed ratio were optimized to avoid gelation and to obtain a maximum yield of multicyclic polyethers free of functional groups. Regardless of these reaction conditions, only low fractions of perfect multicycles were obtained from DCDPS apparently due to steric hindrance of ring closure. Under the same conditions high fractions of perfect multicycles were achieved with the longer and more flexible DCSBP. The reaction products were characterized by MALDI‐TOF mass spectrometry, ¹H‐NMR spectroscopy viscosity, and DSC measurements. Relatively low glass transition temperatures (T_gs ≈ 160–175 °C) were found. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3732–3739, 2008     

Comparative study on polyimides from isomeric 3,3′‐, 3,4′‐, and 4,4′‐linked bis(thioether anhydride)s

Three isomeric bis(thioether anhydride) monomers, 4,4′‐bis(2,3‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,3′‐PTPKDA), 4,4′‐bis(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (4,4′‐PTPKDA), and 4‐(2,3‐dicarboxyphenylthio)‐4′‐(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,4′‐PTPKDA), were prepared through multistep reactions. Their structures were determined via Fourier transform infrared, NMR, and elemental analysis. Three series of polyimides (PIs) were prepared from the obtained isomeric dianhydrides and aromatic diamines in N‐methyl‐2‐pyrrolidone (NMP) via the conventional two‐step method. The PIs showed excellent solubility in common organic solvents such as chloroform, N,N‐dimethylacetamide, and NMP. Their glass‐transition temperatures decreased according to the order of PIs on the basis of 3,3′‐PTPKDA, 3,4′‐PTPKDA, and 4,4′‐PTPKDA. The 5% weight loss temperatures (T_5%) of all PIs in nitrogen were observed at 504–519 °C. The rheological properties of isomeric PI resins based on 3,3′‐PTPKDA/4,4′‐oxydianiline/phthalic anhydride showed lower complex viscosity and better melt stability compared with the corresponding isomers from 4,4′‐ and 3,4′‐PTPKDA. In addition, the PI films based on three isomeric dianhydrides and 2,2′‐bis(trifluoromethyl)benzidine had a low moisture absorption of 0.27–0.35%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

(4,4′‐Bipyridine)mercury(II) Coordination Polymers,Syntheses, and Structures

Mercury(II) complexes with 4,4′‐bipyridine (4,4′‐bipy) ligand were synthesized and characterized by elemental analysis, and IR, ¹H‐ and ¹³C‐NMR spectroscopy. The structures of the complexes [Hg₃(4,4′‐bipy)₂(CH₃COO)₂(SCN)₄]_n ( 1 ), [Hg₅(4,4′‐bipy)₅(SCN)₁₀]_n ( 2 ), [Hg₂(4,4′‐bipy)₂(CH₃COO)₂]_n(ClO₄)_2n ( 3 ), and [Hg(4,4′‐bipy)I₂]_n ( 4 ) were determined by X‐ray crystallography. The single‐crystal X‐ray data show that 2 and 4 are one‐dimensional zigzag polymers with four‐coordinate Hg‐atoms, whereas 1 is a one‐dimensional helical chain with two four‐coordinate and one six‐coordinate Hg‐atom. Complex 3 is a two‐dimensional polymer with a five‐coordinate Hg‐atom. These results show the capacity of the Hg‐ion to act as a soft acid that is capable to form compounds with coordination numbers four, five, and six and consequently to produce different forms of coordination polymers, containing one‐ and two‐dimensional networks.     

77Se n.m.r. studies of organoselenium compounds: III—substituent effects in 4,4′-disubstituted diphenyl selenides and 4,4′-disubstituted diphenylmethanes studied by 1H, 13C and 77Se spectroscopy

⁷⁷Se N.m.r. spectra of 4,4′-disubstituted diphenyl selenides have been obtained. The chemical shifts could be correlated with substituent constants of the Hammett type or with Swain and Lupton two-parameter equations. No correlations were observed between these ⁷⁷Se shifts and the ¹³C shifts of the CH₂ group of 4,4′-disubstituted diphenylmethanes, the latter shifts showing no correlation with substituent constants. On the other hand linear correlation was observed between the ⁷⁷Se shifts of the 4,4′-disubstituted diphenyl selenides and the ¹H shifts of the CH₂ group of the diphenylmethanes, the ¹³C shifts of their 1-carbons and the ¹⁹F shifts of 4-substituted fluorobenzenes.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

A facile strategy for synthesis of α,α′‐heterobifunctionalized poly (ε‐caprolactones) and poly (methyl methacrylate)s containing “clickable” aldehyde and allyloxy functional groups using initiator approach

Two new initiators, namely, 4‐(4‐(2‐(4‐(allyloxy) phenyl)‐5‐hydroxypentane 2‐yl) phenoxy)benzaldehyde and 4‐(4‐(allyloxy) phenyl)‐4‐(4‐(4‐formylphenoxy) phenyl) pentyl 2‐bromo‐2‐methyl propanoate containing “clickable” hetero‐functionalities namely aldehyde and allyloxy were synthesized starting from commercially available 4,4′‐bis(4‐hydroxyphenyl) pentanoic acid. These initiators were utilized, respectively, for ring opening polymerization of ε‐caprolactone and atom transfer radical polymerization of methyl methacrylate. Well‐defined α‐aldehyde, α′‐allyloxy heterobifunctionalized poly(ε‐caprolactones) (M_n,GPC: 5900–29,000, PDI: 1.26–1.43) and poly(methyl methacrylate)s (M_n,GPC: 5300–28800, PDI: 1.19–1.25) were synthesized. The kinetic study of methyl methacrylate polymerization demonstrated controlled polymerization behavior. The presence of aldehyde and allyloxy functionality on polymers was confirmed by ¹H NMR spectroscopy. Aldehyde‐aminooxy and thiol‐ene metal‐free double click strategy was used to demonstrate reactivity of functional groups on polymers. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of novel,optically active poly(amide‐imide)s from N,N′‐(4,4′‐sulfonediphthaloyl)‐bis‐L‐phenylalanine diacid chloride and aromatic diamines under microwave irradiation

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride was reacted with L ‐phenylalanine in acetic acid, and the resulting imide acid ( 3 ) was obtained in high yield. The diacid chloride ( 4 ) was obtained from its diacid derivative ( 3 ) by reaction with thionyl chloride. The polycondensation reaction of 4 with several aromatic diamines such as 4,4′‐sulfonyldianiline, 4,4′‐diaminodiphenyl methane, 4,4′‐diaminodiphenylether, p‐phenylenediamine, m‐phenylenediamine, 2,4‐diaminotoluene, and 1,5‐diaminonaphthalene was developed with a domestic microwave oven in the presence of trimethylsilyl chloride and a small amount of a polar organic medium such as o‐cresol. The polymerization reactions were also performed with two other methods: low‐temperature solution polycondensation in the presence of trimethylsilyl chloride and reflux conditions. A series of optically active poly(amide‐imide)s with moderate inherent viscosities of 0.21–0.42 dL/g were obtained in high yield. All of the aforementioned polymers were fully characterized by IR, ¹H NMR elemental analyses, and specific rotation techniques. Some structural characterizations and physical properties of these optically active poly(amide‐imide) s are reported. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3974–3988, 2003     

Poly-Schiff bases. I. Preparation of poly-Schiff bases from 4,4′-diacetyl diphenyl ether (DDE) with various diamines

Thermally stable and semiconducting poly-Schiff bases are synthesized by condensing 4,4′-diacetyl diphenyl ether with o-, m-, and p-phenylene diamines, benzidine, and ethylene diamine under different experimental conditions. These bases are insoluble in common organic solvents. They are characterized by infrared (IR) and viscosity measurements, thermal analysis, and the study of electricel properties at various temperatures. Variation of electrical conductivity σ with temperature followed the empirical relation σ = σ₀e^?E*/kT.     

Poly(4,4′-dipiperidyl)amides

Polyamides from 4,4′-dipiperidyl, 1,2-ethylene-, and 1,3-propylene- bridged dipiperidyls were prepared via solution and interfacial polycondensation techniques. In sharp contrast to the polyamides from N,N′-alkyl-substituted alkylene diamines and aromatic diacids, the polyamides from 4,4′-dipiperidyls are high-melting (up to 455°C) and alcohol-insoluble. Tough films were cast from formic acid solutions of the polymers; fiber of good physical properties was prepared from a formic acid solution of the polyterephthalamide of 1,2-di(4-piperidyl)ethane.     

A novel cadmium(II) coordination polymer with biphenyl‐3,3′,4,4′‐tetra­carboxylic acid and 4,4′‐bipyridine

A novel cadmium(II) coordination polymer, poly[[[bis­(4,4′‐bipyridine)cadmium(II)]‐μ₃‐4,4′‐dicarboxy­biphenyl‐3,3′‐di­carboxyl­ato] 0.35‐hydrate], {[Cd(C₁₆H₈O₈)(C₁₀H₈N₂)₂]·0.35H₂O}_n, was obtained by reaction of Cd(CH₃COO)₂·3H₂O, 4,4′‐bipyridine (4,4′‐bpy) and biphenyl‐3,3′,4,4′‐tetra­car­boxylic acid (H₄L) under hydro­thermal conditions. Each Cd^II atom lies at the centre of a distorted octa­hedron, coordinated by four O atoms from three H₂L²⁻ ligands and N atoms from two monodentate 4,4′‐bpy ligands. Each H₂L²⁻ ligand coordinates to three Cd^II atoms through two carboxyl­ate groups, one acting as a bridging bidentate ligand and the other in a chelating bidentate fashion. Two Cd atoms, two H₂L²⁻ anions and four 4,4′‐bpy ligands form a ring dimer node, which links into an extended broad zonal one‐dimensional chain along the c axis.     

Sorption and transport of carbon dioxide in a polyimide from 3,3′4,4′-biphenyltetracarboxylic dianhydride and 4,4′-diaminodiphenyl sulfone

CO₂ sorption and transport were investigated for the polyimide prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-diaminodiphenyl sulfone (DDS). The morphology of films did not change on annealing above the glass transition temperature and remained amorphous unlike the polyimide prepared from BPDA and 4,4′-oxydianilline (ODA). This seems to be due to the strong hindrance to rotation of the sulfonyl linkage. Sorption and transport data were analyzed according to the dual-mode model. Solubility, diffusion, and permeability coefficients at 20 atm and 80°C for BPDA-DDS polyimide were substantially equal between as-cast and annealed films and were 1.7, 2.2, and 3.7 times greater, respectively, than for the as-cast films of the BPDA-ODA polyimide. The higher solubility was due to larger values of the Henry's law solubility constant k_D, Langmuir capacity constant C, and the Langmuir affinity constant b. The sorption and transport properties were compared with those for amorphous glassy aromatic polymers including other polyimides. The relation of k, C, b, and the diffusion coefficients in the Henry's law population and the Langmuir population (D_D and D_H) with other properties of the polymers were discussed. Values D_D and D_H for BPDA-DDS polyimide were much larger than expected from the estimated free-volume fraction.     

Cyclic and multicyclic poly(ether sulfone)s by polycondensation of 5,5′,6,6′‐tetrahydroxy‐ 3,3,3′,3′‐tetramethyl spirobisindane and 4,4′‐difluorodiphenylsulfone

5.5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane (TTSBI) was polycondensed with 4,4′‐difluorodiphenylsulfone (DFDPS) in DMSO with K₂CO₃ as catalyst and azeotopic removal of water. The feed ratio of DFDPS/TTSBI was varied from 1.0/1.0 to 2.0/1.0 at concentrations avoiding gelation. At feed ratios around 1.0/1.0 hyperbranched polymers were a minority and cyclic poly(ether sulfone)s were the predominant reaction products. With increasing feed ratio of DFDPS more and more multicyclic polymers were formed, and at a feed ratio of 1.9/1.0 perfect multicycles free of functional groups were the vast majority of the reaction product. Despite variation of the reaction conditions quantitative conversion was not achieved. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5597–5605, 2007     

Polymers from 4,4′-sulfonyldiphenol

Several polymers have been prepared from 4,4′-sulfonyldiphenol (SDP) or its bis-phenate salt as the nucleophile in condensation polymerizations. Ester-sulfone-amic acid polymers were of fairly high molecular weight, and could be imidized. Soluble film-forming poly ether-ester-sulfones were prepared from diphenyl ether diacid chloride.     

Polymerization of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L‐leucine) diacid chloride with aromatic diamines by microwave irradiation

A new facile and rapid polycondensation reaction of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L‐leucine) diacid chloride (1) with several aromatic diamines, including benzidine (2a), 4,4′‐diaminodiphenyl methane (2b), 1,5‐diaminoanthraquinone (2c), 4,4′‐sulfonyldianiline (2d), 3,3′‐diaminobenzophenone (2e), P‐phenylenediamine (2f), 2,6‐diaminopyridine (2g), 4,4′‐diaminobenzophenone (2h), 2,4‐diaminotoluene (2i), and 4,4′‐diaminodiphenylether (2j), was developed with a domestic microwave oven in the presence of a small amount of a polar organic medium such as o‐cresol. The polymerization reactions proceeded rapidly compared to conventional solution polycondensation and finished within 12 min, producing a series of optically active poly(amide‐imide)s with quantitative yields and high inherent viscosities of 0.50–1.93 dL/g. All of the polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(amide‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1154–1160, 2000     

Synthesis of optically active poly(amide‐imide)s derived from N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L‐leucine diacid chloride and aromatic diamines by microwave radiation

3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (4,4′‐carbonyldiphathalic anhydride) was reacted with L ‐leucine in a mixture of acetic acid and pyridine (3 : 2), and the resulting imide‐acid [N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid] was obtained in quantitative yield. The compound was converted to the N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid chloride by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride with several aromatic diamines such as 4,4′‐diaminodiphenyl methane, 2,4‐diaminotoluene, 4,4′‐sulfonyldianiline, p‐phenylenedi‐amine, 4,4′‐diaminodiphenylether, and m‐phenylenediamine was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as O‐cresol. The polymerization reactions proceeded rapidly compared with the conventional solution polycondensation and were completed within 6 min, producing a series of optically active poly(amide‐imide)s with a high yield and an inherent viscosity of 0.37–0.57 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(amide‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 177–186, 2001