The improvement of electro‐optical properties of polymer‐dispersed liquid crystals using copolymer macroinitiator with different glass transition temperature

In this article, copolymer macroinitiators prepared with styrene and iso‐octyl acrylate by reversible additional‐fragmental chain transfer polymerization were used to prepare polymer‐dispersed liquid crystals (PDLCs) with methyl acrylate. The electro‐optical properties of the PDLCs were investigated. The results showed that the glass transition temperature (T_g) of the macroinitiator has a great influence on the memory effect of the resulting PDLCs. Low driving voltage and low memory effect PDLCs could easily be obtained with copolymer macroinitiators. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation of novel cyclic olefin copolymer with high glass transition temperature

A series of novel cyclic olefin copolymers (COCs), including ethylene/tricyclo[4.3.0.1^2,5]deca‐3‐ene (TDE), ethylene/tricyclo[4.4.0.1^2,5]undec‐3‐ene (TUE), and ethylene/tricyclo[6.4.0.1^9,12]tridec‐10‐ene (TTE) copolymers, have been synthesized via effective copolymerizations of ethylene with bulk cyclic olefin comonomers using bis(β‐enaminoketonato) titanium catalysts ( 1a [PhN?C(CH₃)CHC(CF₃)O]₂TiCl₂; 1b : [PhN?C(CF₃)CHC(Ph)O]₂TiCl₂). With modified methylaluminoxane as a cocatalyst, both catalysts exhibit high catalytic activities, producing high molecular weight copolymers with high comonomer incorporations and unimodal molecular weight distributions. The microstructures of obtained ethylene/COCs are established by combination of ¹H, ¹³C NMR, ¹³C DEPT, HSQC ¹H? ¹³C, and ¹H? ¹H COSY NMR spectra. DSC analyses indicate that the glass transition temperature (T_g) increases with the enhancement of comonomer volume (TDE < TUE < TTE). High T_g value up to 180 °C is easily attained in ethylene/TTE copolymer with the low content of 35.8 mol %. TGA analyses reveal that these copolymers all possess high thermal stability with degradation temperatures (T_d) higher than 370 °C in N₂ and air. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3144–3152     

New simple method of measuring the surface glass transition temperature of polymers

A lap‐shear joint mechanical testing method has been probed to measure the surface glass transition temperature (T) of the thick bulk films of high‐molecular‐weight polymers. As T, the temperature transition “occurrence of autoadhesion–nonoccurrence of autoadhesion” has been proposed. The influence of chain flexibility, of molecular architecture, of polymer morphology, and of chain ends concentration on the T has been investigated. The correlation between the reduction in T with respect to the glass transition temperature of the bulk (T) and the intensity of the intermolecular interaction in the polymer bulk in amorphous polymers has been found. The effect of surface roughness on T has been discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2012–2021, 2010     

Water absorption in EVOH films and its influence on glass transition temperature

Moisture sorption kinetics of nonoriented ethylene vinyl alcohol copolymer (EVOH) film (EF‐E15) were studied at 25, 35, and 45°C. Anomalous diffusion was observed for the polymeric film at high relative humidities (RH) and higher temperatures. Diffusion and solubility coefficients of water were found to be concentration dependent. The moisture sorption isotherms of three types of EVOH films (EF‐E15, EF‐F15, and EF‐XL15) determined at 25, 35, and 45°C, were well described using the GAB equation. Glass transition temperatures (T_g) of the EVOH films, as influenced by RH, were measured using differential scanning calorimetry. T_g values decreased with increasing RH due to the plasticization effect of water, and were found to be dependent on ethylene content and orientation of the EVOH films. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 691–699, 1999     

Effect of copolymer composition and conversion on the glass transition of methyl acrylate–methyl methacrylate copolymers

The glass transition of methyl methacrylate methyl acrylate copolymers over a wide range of conversion and sequence distribution have been analyzed with the only purpose of predicting the change in the glass transition in copolymers as a function of conversion and consequently of comonomer sequence distribution. © 1994 John Wiley & Sons, Inc.     

On the relationship between microhardness and glass transition temperature of some amorphous polymers

On the basis of microhardness (H) data measured at room temperature only for a number of polymers in the glassy state, a linear correlation between H and the glass transition temperature T_g has been found (H = 1.97T_g − 571). By means of this relationship, the deviation of the H values from the additivity law for some multicomponent and/or multiphase polymeric systems can be accounted for. The latter usually contains a liquidlike soft component and/or phase with T_g below room temperature. A completely different deformation mechanism in comparison to systems with T_g above room temperature is invoked. A novel expression for the hardness of polymers in terms of crystallinity of the single components and/or phases, the T_g values, and the mass fraction of each component is proposed. This expression permits the calculation of (i) the room‐temperature H value of amorphous polymers, mainly containing single bonds in the main chain, provided T_g is known, and of (ii) the contribution of the soft liquidlike components (phases) to the hardness of the entire multiphase system. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1413–1419, 1999     

Glass-forming composition regions and glass transition temperature in nonaqueous electrolyte solutions

With an interest in assessing the suitability of various nonaqueous solutions for electrolyte studies in the viscous region of the liquid state, the glass-forming properties of solutions of calcium nitrate dissolved in various nonaqueous solvents have been determined and compared with the corresponding aqueous solution properties. Solutions in dimethyl formamide prove of particular interest. The composition dependence of the glass temperature is similar in all solvents at high salt contents. Ideal glass temperatures, estimated from thermodynamic data for the pure solvents, are compared with experimental or extrapolated values.     

Small molecule‐mediated glass transition of acrylic copolymers: Effect of hydrogen bonding strength on glass transition temperature

Poly(styrene‐co‐ethyl acrylate) [P(St‐co‐EA)] with different ratios of St/EA was mixed with the small molecule 4,4′‐thio‐bis(6‐tert‐butyl‐m‐methyl phenol) (AO300) to investigate the influence of hydrogen bonding strength on the glass transition behavior. The glass transition temperature (T_g) linearly increased after adding AO300, and the slope value decreased with increased St/EA ratio. All lines could be extended to 62 °C, demonstrating that T_g of the small molecule in situ detected by the polymer chain was much higher than that by small molecule itself (29 °C). Fourier transform infrared spectroscopy analysis showed that the small molecules began to be self‐associated at a concentration where the hydrogen bonded carbonyl ratio of the bulk polymer was approximately 0.5 and irrespective of the St/EA ratio. Above the critical loading, the mixture's T_g negatively deviated from the linearly extended lines because of self‐association of the small molecules. The apparent T_g of AO300 was found to strongly depend on intermolecular hydrogen bonding number and strength. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 400–408     

Nanofiller effect on the glass transition of a polyurethane

The effect of silicananofiller on the glass transition of a polyurethane was studied by DSC. Thepristine polymer exhibits a single glass transition at about –10°C.Uniform SiO2 spheres with different average sizes and narrow size distributionswere synthesized in solution by the Stöber method [1]. Both the effectsof silica content within the polymer and particle size were investigated,as well as two different surface treatments. Scanning electron microscopy(SEM) clearly confirms the presence of the particles within the polymer matrix,showing uniform distribution and no agglomeration. While shifting of the glasstransition has been reported by many authors, we have not seen any noticeableshift in this polymer. Surprisingly, we found no relevant effects when eitherincreasing the filler content or changing the particle size. Different amountsof particles with average diameters of 175, 395 and 730 nm did not affectthe glass transition temperature of the pristine polymer.     

The abnormal behavior of polymers glass transition temperature increase and its mechanism

In terms of the classical theory in textbooks, the two components with phase separation in a binary polymer blend will, depending on their compatibility, have their respective Tg get closer or remain in their original values. According to the classical theory, the Tg of plastic component shall remain unchanged or move toward the lower Tg of rubber component in a rubber/plastic blend. However, ultra-fine full-vulcanized powdered rubber (UFPR) with a diameter of ca. 100 nm can simultaneously increase the toughness and the Tg of plastics, which is abnormal and is difficult to explain by classical theory. In this feature article, the abnormal behavior and its mechanism are discussed in detail.     

On the glass transition temperature of styrene-n-butyl methacrylate copolymers in dependence on chemical composition,molecular weight,and mixtures

For statistic copolymers of styrene and n-butyl methacrylate, the relation between the glass transition temperature and the chemical composition or molecular weight of the copolymers has been determined. Further, the dependence of the glass transition temperature on the composition of binary and ternary blends from statistical poly (styrene-co-n-butyl methacrylates) of a nearly equal chemical composition but a very different molecular weight has been studied. Among several equations considered for the correlation between glass transition temperature and composition of the mentioned copolymers with relatively low molecular weights, the Gordon/Taylor and Couchman equations gave the best agreement with the experimental results. For the glass transition temperature of poly(styrene-co-n-butyl methacrylate) with an n-butyl methacrylate content of about 30 wt % in dependence on the molecular weight, the Kanig-Ueberreiter and Fox-Flory equations proved to be useful for the examined molecular weight range. The glass transition temperatures of the polymer blends have been studied for a low/high-molecular component system, a system of two low-molecular components, as well as for systems with a third component. The glass transition temperatures of the mixtures frequently exceeded those of their individual components. © 1994 John Wiley & Sons, Inc.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

DSC study of melting and glass transition in gelatins

In the range from –50° to +130°C, the temperature dependence of the heat capacity for different kinds of gelatins with water contents of from 2 to 95% was studied by the DSC method. It was shown that, in all studied cases, metastable collagen-like structures are formed in gels or crystalline gelatins, with thermodynamic parameters depending on the formation conditions. The characteristic properties of the glass transitions in amorphous gelatins and crystalline gelatins with different melting heats and different contents of the ordered phase were established. Special attention is paid to the structural properties of free and bound water. The dependence of the glass transition temperatureT _g on the bound water content was shown to be of general applicability for many denatured biopolymers. Free water in gelatins, in distinction to the bound water, does not act as a plasticizer, but forms a rigid matrix inhibiting the glass transition.

---

Zusammenfassung Mittels DSC wurde im Bereich –50° bis +130°C die Temperaturabhängigkeit der Wärmekapazität für verschiedene Arten von Gelantine mit einem Wassergehalt von 2 bis 95% untersucht. Es wurde gezeigt, daß in allen untersuchten Fällen metastabile kollagenähnliche Strukturen in Gelen oder kristallinen Gelantinen gebildet werden, deren thermodynamische Parameter von den Bildungsbedingungen abhängen. Es wurden die charakteristischen Eigenschaften der Glasumwandlungen in amorphen Gelantinen und kristallinen Gelantinen mit unterschiedlichen Schmelzwärmen und einem unterschiedlichen Gehalt an geordneter Phase bestimmt. Spezielle Aufmerksamkeit wurde den strukturellen Eigenschaften von freiem und gebundenem Wasser gewidmet. Es wurde gezeigt, daß die Ab-hängigkeit der GlasumwandlungstemperaturT _g vom Gehalt an gebundenem Wasser generell für viele denaturierte Biopolymere anwendbar ist. Im Unterschied zu gebundenem Wasser fungiert freies Wasser in Gelatinen nicht als ein Weichmacher, bildet aber eine starre Matrix, die die Glasumwandlung verhindert.

     

The relevance of glass transition temperature for the process of tablet formation

The aim was to determine the relevance of the glass transition temperature (T_g) on the compressibility and compactibility of different excipients as celluloses, cellulose derivatives, lactoses, starch, maltodextrin and carrageenan. Their T_g was determined, they were tableted on an instrumented eccentric tableting machine and crushing force was analyzed. Using force, time and displacement tableting behavior was analyzed by 3D modeling. The parameters obtained, d (time plasticity), e (pressure plasticity) and w (fast elastic decompression), show different deformation mechanisms for the materials in relation to their T_g. Further, if the T_g can be reversibly exceeded during tableting, crushing force is high, otherwise crushing force is lower. This revised version was published online in July 2006 with corrections to the Cover Date.     

In situ measurement of the glass transition temperature of polymers with compressed fluid diluents

In situ measurement of the creep compliance of poly(methyl methacrylate) (PMMA) and poly(ethyl methacrylate) (PEMA), equilibrated with a pressurized CO₂ phase, is used to determine the glass transition temperature. Corrections due to dilation of the polymer by CO₂ as well as the buoyancy are assessed. Both polymer systems exhibit a recently discovered phenomenon, retrograde vitrification, in which a liquid polymer becomes a glass with an increase in temperature. The experimental results are predicted semi-quantitatively in terms of the temperature and pressure effects on the solubility of the compressed fluid in the polymer. © 1994 John Wiley & Sons, Inc.     

Influence of macroinitiator’s glass transition temperature on the response times of polymer dispersed liquid crystals

Glass transition temperature (T_g), an important parameter of polymer, was reported to have great influence on the electro-optical properties of polymer dispersed liquid crystals (PDLCs). In this study, macroinitiators with different T_g were synthesised by reversible addition fragmentation chain transfer polymerisation, and used to prepare PDLCs with different T_g block chains. The effect of different T_g of the block chains on response times was investigated. It was found that rise time decreased and decay time increased with the decrease of the block chain’s T_g. We proposed a possible mechanism by which T_g of the block chains influence response times.     

Influence of matrix glass transition temperature on the memory effect of polymer‐dispersed liquid crystals

In this article, macroinitiators with different glass transition temperature (T_g) were synthesized by reversible additional‐fragmental chain transfer polymerization, and used to prepare polymer‐dispersed liquid crystals (PDLCs) with methyl acrylate. The memory effect of these PDLCs was investigated. The results showed that remarkable memory effect exhibit only in PDLCs with high and low T_g block chain. The possible mechanism responsible for the behavior is sketched. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 729–732, 2010     

Determination of glass transition temperature of polyimides from atomistic molecular dynamics simulations and machine-learning algorithms

Glass transition temperature (T_g) plays an important role in controlling the mechanical and thermal properties of a polymer. Polyimides as an important category of engineering plastics have wide applications because of their superior heat resistance and mechanical strength. The capability of predicting T_g for a polyimide a priori is therefore highly desirable in order to expedite the design and discovery of new polyimide polymers with targeted properties and applications. Here we explore three different approaches to either compute T_g for a polyimide via all-atom molecular dynamics simulations or predict T_g via a mathematical model generated by using machine-learning algorithms to analyze existing data collected from the literature. Our simulations reveal that T_g can be determined from examining the diffusion coefficient of simple gas molecules in a polyimide as a function of temperature and the results are comparable to those derived from data on polymer density versus temperature and actually closer to the available experimental data. Furthermore, the predictive model of T_g derived with machine-learning algorithms can be used to estimate T_g successfully within an uncertainty of about 20 degrees, even for polyimides yet to be synthesized experimentally.     

Influence of the composition on the glass transition temperature of polyurethane and polyurethane acrylate networks

Linear polyurethane, linear segmented polyurethane, polyurethane networks, and polyurethane acrylate networks of various composition were synthesized. The variation of T_g with the type of macrodiol, its length, and the chemical composition of the polymer were studied in relation with the percentage of soft segments, the molar mass between crosslinks, and the concentration of urethane bonds. In this work, the networks were considered as composed of chain segments of various composition between point-like crosslinks. The chemical heterogeneities of the networks were not taken into account. For polyurethanes, it was shown that T_g values are essentially controlled by the amount of urethane bonds. For polyurethane acrylates, the T_g values are dependent on the amount of urethane bonds but also on the presence of crosslinks whose number is varying with the excess of diisocyanate of the first step three times faster for PUA compared with PU. No clear relation was observed between T_g and the molar mass between point-like crosslinks. Another approach considering the network heterogeneities is indispensable and will be used in a following work. © 1996 John Wiley & Sons, Inc.     

Effect of glass transition temperature of polymeric binders on properties ceramic materials

In the paper are presented the studies of the effect of glass transition temperature of new water-thinnable polymeric binders on the properties of ceramic materials obtained by die pressing. The parameters of ceramic samples comprising polymeric binders have been compared with those of samples comprising poly(vinyl alcohol) (PVA) — water-soluble binder. When using poly(acrylic-styrene) (AS), poly(acrylic-allyl) (AA) and poly(vinyl-allyl) (VA) water-thinnable binders, materials of greater density and mechanical strength were obtained in the green state as well as after sintering than those in the case of using PVA. The dependence of the chemical structure of the binders applied on the properties of samples such as the glass transition temperature and hydrophobic-hydrophilic balance of the copolymers has been discussed. This revised version was published online in July 2006 with corrections to the Cover Date.