Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Determination of Paracetamol Based on its Quenching Effect on the Photoluminescence of CdTe Fluorescence Probes

L-Cysteine capped CdTe nanoparticles (NPs) were synthesized in aqueous medium, and their application as fluorescence probes in the determination of paracetamol was studied. The L-cysteine capped CdTe NPs were characterized by transmission electron microscopy, X-ray diffraction spectrometry, spectrofluorometry, ultraviolet-visible and Fourier transform infrared spectrometry. Based on the distinct fluorescence quenching of CdTe fluorescence probes in the presence of paracetamol, a simple, rapid and specific method for paracetamol determination was presented. Under optimum conditions, the relative fluorescence intensity of CdTe NPs was linearly proportional to paracetamol concentration from 1.0 × 10⁻⁸ mol/L to 1.6 × 10⁻⁷ mol/L with a detection limit of 4.2 × 10⁻⁹ mol/L. The proposed method was applied to detect paracetamol in commercial tablets with satisfactory results.     

Hydroxypropyl-β-Cyclodextrin Enhanced Determination for the Vitamin B<Subscript>12</Subscript> by Fluorescence Quenching Method

A novel fluorescence quenching method for the determination of Vitamin B₁₂(VB₁₂) had been developed. It was based on that the fluorescence intensity of erythrosine sodium(ES) could be enhanced by Hydroxypropyl-β-cyclodextrin(HP-β-CD) due to the formation of inclusion complex (HP-β-CD-ES), while the fluorescence intensity of HP-β-CD-ES was diminished after adding VB₁₂ into the system, and there was a linear relationship between the fluorescence quenching value of the system (ΔF) and the concentration of VB₁₂(c). The mechanism of the determination of VB₁₂was discussed. The results showed that under the optimal conditions, the linear range of calibration curve for the determination of VB₁₂ was 0.0∼2.1 × 10⁻⁵ mol/L, and the detection limit was 1.8×10⁻⁷ mol/ L. It could be satisfactorily applied to the determination of VB₁₂ in injections.     

Spectrofluorimetric Assessment of Chlorzoxazone and Ibuprofen in Pharmaceutical Formulations by using Eu-Tetracycline HCl Optical Sensor Doped in Sol–Gel Matrix

A novel, simple, sensitive and selective spectrofluorimetric method was developed for the determination of trace amounts of chlorzoxazone and Ibuprofen in pharmaceutical tablets using optical sensor Eu-Tetracycline HCl doped in sol–gel matrix. The chlorzoxazone or Ibuprofen can remarkably enhance the luminescence intensity of Eu-Tetracycline HCl complex doped in a sol–gel matrix in dimethylformamide (DMF) at pH 9.7 and 6.3, respectively, λ_ex = 400 nm. The enhancing of luminescence intensity peak of Eu-Tetracycline HCl complex at 617 nm is proportional to the concentration of chlorzoxazone or Ibuprofen a result that suggested profitable application as a simple optical sensor for chlorzoxazone or Ibuprofen assessment. The dynamic ranges found for the determination of chlorzoxazone and Ibuprofen concentration are 5 × 10⁻⁹–1 × 10⁻⁴ and 1 × 10⁻⁸–7 × 10⁻⁵ mol L⁻¹, and the limit of detection (LOD) and quantitation limit of detection (LOQ) are 3.1 × 10⁻¹⁰ , 9.6 × 10⁻¹⁰ and 5.6 × 10⁻¹⁰, 1.7 × 10⁻⁹ mol L⁻¹, respectively.     

Silica coating of Co–Pt alloy nanoparticles prepared in the presence of poly(vinylpyrrolidone)

This article describes a method for silica coating of Co–Pt alloy nanoparticles prepared in the presence of poly(vinylpyrrolidone) (PVP) as a stabilizer. The Co–Pt nanoparticles were prepared in an aqueous solution at 25–80 °C from CoCl₂ (3.0 × 10⁻⁴ M), H₂PtCl₆ (3.0 × 10⁻⁴ M), PVP (0–10 g/L), and NaBH₄ (4.8 × 10⁻³–2.4 × 10⁻² M). The silica coating was performed for the Co–Pt nanoparticle colloid containing the PVP ([Co] = [Pt] = 3.0 × 10⁻⁵ M) at 25 °C in (1/4) (v/v) water/ethanol solution with tetraethoxyorthosilicate (TEOS) (7.2 × 10⁻⁵–7.2 × 10⁻³ M) and ammonia (0.1–1.0 M). Silica particles, which had an average size of 43 nm and contained multiple cores of Co–Pt nanoparticles with a size of ca. 8 nm, were produced at 1.4 × 10⁻³ M TEOS and 0.5 M ammonia after the preparation of Co–Pt nanoparticles at 80 °C, 5 g/L PVP, and 2.4 × 10⁻² M NaBH₄. Their core particles were fcc Co–Pt alloy crystallites. Their saturation magnetization was 2.0-emu/g sample, and their coercive field was 12 Oe.     

Influence of Ar, Ne, Xe, and CCl4 impurities on luminescence kinetics of Cd II ions (5s22D5/2-5p2P3/2 transition, λ = 441.6 nm) in He-Cd mixture

The luminescence kinetics of the Cd II ion at a wavelength of 441.6 nm has been studied experi-mentally in a high-pressure He-Cd mixture in the presence of Ar, Ne, Xe, and CCl₄ impurities. Cadmium ions were excited through the bombardment of a cadmium foil heated up to 240°C by a pulsed electron beam with an electron energy of 150 keV, a pulse duration of 3 ns, and a current of 500 A. The constants of collisional quenching of the Cd II 5s ^{2 2} D _5/2 level by Ar, Ne, and Xe atoms and CCl₄ molecules and the integral luminescence quenching constants of this level in the helium medium by these impurity gases have been determined. The constants of collisional quenching appeared to be 8.1 × 10⁻¹² (Ar), 1.2 × 10⁻¹² (Xe), 1.5 × 10⁻¹³ (Ne), and 1.8 × 10⁻¹⁰ cm³/s (CCl₄, for λ = 325 nm), while the integral constants were found to be, respectively, 4.1 × 10⁻¹¹, 3.4 × 10⁻¹¹, 9.5 × 10⁻¹², 1.4 × 10⁻⁹ cm³/s for Ar, Ne, Xe, and CCl₄ at a buffer gas pressure of 1 atm. Original Russian Text ? A.I. Miskevich, Liu Tao, 2009, published in Optika i Spektroskopiya, 2009, Vol. 107, No. 1, pp. 45–49.     

Influence of amplified spontaneous emission and fluorescence of β-carotene on stimulated Raman scattering of carbon disulfide

β-carotene with double fluorescence characteristics and large third-order optical nonlinearities, which is dissolved in the carbon disulfide (CS₂) as the core medium of a liquid core optical fiber (LCOF), is applied in the study of the CS₂ stimulated Raman scattering (SRS). The results of this study show that when the concentrations of solution are more than 3.72×10⁻⁷ mol/L, the amplified spontaneous emission (ASE) of β-carotene is the main factor influencing the threshold and intensity of Stokes lines; when the concentrations of solution are lower than 3.72×10⁻⁷ mol/L, the ASE disappears and the fluorescence plays the key role: The high-order Stokes lines may be observed at very low input-laser power, and the Stokes thresholds decrease as the solution concentration increases. The result may be widely used in the study of broadband stimulated radiation laser and seeding laser. Supported by the National Natural Science Foundation of China (Grant No. 10774057)     

Fluorescence Enhancement Effect for the Determination of Polychlorinated Biphenyls with Bovine Serum Albumin

A sensitive and selective method for the trace determination of 3, 3’, 4, 4’-tetrachlorobiphenyl (PCB77) by using bovine serum albumin (BSA) as a fluorescence probe was introduced. Under optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of polychlorinated biphenyls in the range of 8.9 × 10⁻⁸–5.0 × 10⁻⁶ mol L⁻¹ for PCB77, and 5.0 × 10⁻⁷–5.0 × 10⁻⁶ mol L⁻¹ for 2, 2’, 5, 5’-tetrachlorbiphenyl (PCB52). The detection limits (S/N = 3) of PCB77 and PCB52 were 2.6 × 10⁻⁸ mol L⁻¹ and 2.9 × 10⁻⁷ mol L⁻¹, respectively. Furthermore, the fluorescence enhancement mechanism was discussed in detail. Results indicated that fluorescence enhancement of the system originated from the formation of BSA-PCBs complexes. In addition, PCBs were mainly bound to the tyrosine residues in BSA molecules.     

A New Spectrofluorimetric Method for Determination of Trace Amounts 5-Hydroxytryptamine in Human Urine and Serum

A new spectrofluorimetric method was developed for the determination of trace amount of 5-hydroxytryptamine (5-HT) in human urine and serum samples. In the NaAc-HAc buffer solution of pH=5.80, 5-HT can react with formaldehyde-acetylacetone system to form a new compound which sends yellow green fluorescence at 533nm and the enhanced fluorescence intensity is in proportion to the concentration of 5-HT. Optimum conditions for the determination of 5-HT were also investigated. The dynamic range and detection limit for the determination of 5-HT are 5.35×10⁻⁷∼1.07×10⁻⁴ mol/L and 2.08×10⁻⁷ mol/L, respectively. The developed method is simple, practical and can be successfully applied to determination of 5-HT in human urine and serum samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the 5-HT - formaldehyde-acetylacetone system have been also discussed.     

Spectrofluorimetric Assessment of Doxycycline Hydrochloride in Pharmaceutical Tablets and Serum Sample Based on the Enhancement of the Luminescence Intensity of the Optical Sensor Sm<Superscript>3+</Superscript> Ion

A simple and sensitive spectrofluorimetric method for determination of trace amount of doxycycline hydrochloride (DC) in pharmaceutical tablets and serum samples was developed. In ammonia buffer solution of pH 8.9 the doxycycline hydrochloride can remarkably enhance the luminescence intensity of the Sm³⁺ ion in Sm³⁺- DC complex at λ_ex = 400 nm. The produced luminescence intensity of Sm³⁺- DC complex in DMSO is in proportion to the concentration of DC and used as optical sensor for its determination. The dynamic range for the determination of DC is 1 × 10⁻⁸ – 5 × 10⁻⁶ mol L⁻¹ and in case of quantum yield calculations is 7 × 10⁻⁹ – 5 × 10⁻⁶ mol L⁻¹ with detection limit of 6.5 × 10⁻¹⁰ mol L⁻¹. The enhancement mechanism of the luminescence intensity in the Sm³⁺- DC system has been also discussed. A comparison with other spectrofluorimetric methods for tetracycline derivatives in which Eu³⁺ ion is used instead of Sm³⁺ ion is also studied.     

OH number densities and plasma jet behavior in atmospheric microwave plasma jets operating with different plasma gases (Ar,Ar/N<Subscript>2</Subscript>, and Ar/O<Subscript>2</Subscript>)

OH radical number density in multiple atmospheric pressure microwave plasma jets is measured using UV cavity ringdown spectroscopy of the OH (A–X) (0–0) band at 308 nm. The plasma cavity was excited by a 2.45 GHz microwave plasma source and plasma jets of 2–12 mm long were generated by using three different plasma gases, argon (Ar), Ar/N₂, and Ar/O₂. Comparative characterization of the plasma jets in terms of plasma shape, stability, gas temperature, emission intensities of OH, NO, and N₂, and absolute number density of the OH radical was carried out under different plasma gas flow rates and powers at various locations along the plasma jet axis. With three different operating gases, the presence of OH radicals in all of the plasma jets extended to the far downstream. As compared to the argon plasma jets, the plasma jets formed with Ar/N₂ and Ar/O₂ are more diffuse and less stable. Plasma gas temperatures along the jet axis were measured to be in the range of 470–800 K for all of the jets formed in the different gas mixtures. In each plasma jet, OH number density decreases along the jet axis from the highest OH density in the vicinity of the jet tip to the lowest in the far downstream. OH density ranges from 1.3 × 10¹² to 1.1 × 10¹⁶, 4.1 × 10¹³ to 3.9 × 10¹⁵, and 7.0 × 10¹² to 4.6 × 10¹⁶ molecule/cm³ in the Ar, Ar/N₂, and Ar/O₂ plasma jets, respectively. The OH density dependence on plasma power and gas flow rate in the three plasma jets is also investigated.     

Degradation in polymer Ni-MH battery

The alkaline solid polymer electrolyte system with the conductivity of (8.5±0.2) × 10⁻⁴ Scm⁻¹ composes of polyvinyl alcohol (PVA) and potassium hydroxide (KOH) have been used in fabrication of Mg₂Ni/Ni(OH)₂ nickel metal hydride cell. The self-dehydriding of the cell during storage was presented by open circuit voltage study. Cell degradation after charge-discharge cycling is characterized by means of X-ray diffraction and scanning electron microscopic analyses. The failure of the cell can be ascribed by a small formation of Mg(OH)₂ oxide layer and surface resistance between electrode-electrolyte.     

Interaction of Thyroxine with 7 Hydroxycoumarin: A Fluorescence Quenching Study

The interaction between thyroxine hormone and 7 hydroxycoumarin (7HC) was investigated using fluorescence quenching method. The experimental results showed that thyroxine could quench the fluorescence of 7HC by forming the 7HC–thyroxine complex with static quenching. The apparent binding constants (K) between 7HC and thyroxine were determined to be 1.51 × 10⁴ (297 K) and 9.06 × 10³ (310 K). The binding sites (n) 0.98 ± 0.1. The thermodynamic parameters showed that the interaction between 7HC and thyroxine was driven mainly by hydrogen bonding interactions and van der Waals force. Calibration for thyroxine, based on quenching titration data, was linear in the concentration range 2.0 × 10⁻⁸ to 3.0 × 10⁻⁷ mol/l. The relative standard deviation was 2.58% for 2.0 × 10⁻⁷ mol/l thyroxine (n = 4) and the 3σ limit of detection was 3.42 × 10⁻⁸ mol/l in cationic surfactant CTAB medium.     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

New search for processes violating the Pauli exclusion principle in sodium and in iodine

In this paper a new search for non-Paulian nuclear processes, i.e. processes normally forbidden by the Pauli Exclusion Principle (PEP), is presented. It has been carried out at the Gran Sasso National Laboratory of the INFN by means of the highly radiopure DAMA/LIBRA set-up (sensitive mass of about 250 kg highly radiopure NaI(Tl)). In particular, a new improved upper limit for the spontaneous non-Paulian emission rate of protons with energy E _p ≥ 10 MeV in ²³Na and ¹²⁷I has been obtained: 1.63 × 10⁻³³ s⁻¹ (90% C.L.). The corresponding limit on the relative strength (δ ²) for the searched non-Paulian transition is δ ²≲(3–4)×10⁻⁵⁵ (90% C.L.). Moreover, PEP-violating electron transitions in iodine atoms have also been investigated. Lifetimes shorter than 4.7×10³⁰ s are excluded at 90% C.L.; this allows us to derive the limit δ _e ²<1.28×10⁻⁴⁷ (90% C.L.). This latter limit can also be related to a possible finite size of the electron in composite models of quarks and leptons providing superficial violation of the PEP; the obtained upper limit on the electron size is r ₀<5.7×10⁻¹⁸ cm (energy scale of E≳3.5 TeV).     

Determination of the OH radical in atmospheric pressure dielectric barrier discharge plasmas using near infrared cavity ring-down spectroscopy

The hydroxyl radical (OH) plays an important role in combustion systems, atmospheric chemistry and the removal of air pollutants by non-thermal plasmas. The present work reports the determination of the hydroxyl radicals in atmospheric dielectric barrier discharge plasmas via near infrared continuous wave cavity ring-down spectroscopy. The P-branches of OH X²Π_i (ν' = 2 ←ν^′′ = 0) bands were used for its number density measurements. The minimum measurable absorption coefficient is about 3 × 10^-8 cm^-1 in DBD plasmas. At certain experimental conditions (a.c. frequency of 70 kHz, 6700 ppm H₂O in He, 1 atm), when the peak-to-peak discharge voltage varied from 6 kV to 10.4 kV, the determined OH radical concentration increased from (2.1 ± 0.1) × 10¹³ molecules cm^-3 to (3.7 ± 0.1) × 10¹³ molecules cm^-3. The plasma gas temperature, derived from the Boltzmann plots of OH rotational population distributions, ranged from 312 ± 10 K to 363 ± 10 K when the discharge voltage was raised in the above range. The influences of O₂ and N₂ addition on the production of OH radicals have been also investigated.     

Interaction of a New Fluorescent Probe with DNA and its Use in Determination of DNA

In this paper we reported a metal complex 1-Zn (2,5-di-[2-(3,5-bis(2-pyridylmethyl)amine-4-hydroxy-phenyl)-ethylene]-pyrazine-Zn) as a fluorescent probe sensing DNA. The result of the competitive experiment of the probe with ethidium bromide (EB) to bind DNA, absorption spectral change and polarization change in the presence and absence of DNA revealed that interaction between the probe and DNA was via intercalation. Ionic strength experiment showed the existence of electrostatic interaction as well. Scatchard plots also confirmed the combined binding modes. The fluorescence enhancement of the probe was ascribed to highly hydrophobic environment when it bound the macromolecules such as DNA, RNA or denatured DNA. The binding constant between the probe and DNA was estimated as 3.13 × 10⁷ mol⁻¹ L. The emission intensity increase was proportional to the concentration of DNA. Based on this, the probe was used to determine the concentration of calf thymus DNA (ct-DNA). The corresponding linear response ranged from 2.50 × 10⁻⁷ to 4.75 × 10⁻⁶ mol L⁻¹, and detection limit was 1.93 × 10⁻⁸ mol L⁻¹ for ct-DNA.     

Mixed conductivity of zircon-type Ce1−xAxVO4±δ (A=Ca, Sr)

Incorporation of alkaline-earth cations into the zircon-type lattice of Ce_1−xA_xVO_4+δ (A=Ca, Sr; x=0−0.2) was found to significantly increase the p-type electronic conductivity and to decrease the Seebeck coefficient, which becomes negative at x≥0.1. The oxygen ionic conductivity is essentially unaffected by doping. The ion transference numbers of Ce_1−xA_xVO_4+δ in air, determined by the faradaic efficiency measurements, are in the range from 2×10⁻⁴ to 6×10⁻³ at 973–1223 K, increasing when temperature increases or alkaline-earth cation content decreases. The results on the partial conductivities and Seebeck coefficient suggest the presence of hyperstoichiometric oxygen, responsible for ionic transport, in the lattice of doped cerium vanadates. The activation energies for the electron-hole and ionic conduction both decrease on doping and vary in the ranges 39–45 kJ/mol and 87–112 kJ/mol, respectively. Paper presented at the 9th EuroConference on Ionics, Ixia, Rhodes, Greece, Sept. 15–21, 2002.     

EPR Equilibration Study of the O–H Bond Dissociation Enthalpy in a Benzyl Phenolic Antioxidant

The equilibrium of the reaction galvinoxyl radical + 4,4′-methylene-bis(2,6-di-tert-butyl-phenol) (IOH) ⇆ hydrogalvinoxyl + 4,4′-methylene-bis(2,6-di-tert-butyl-phenoxyl radical) was monitored by electron paramagnetic resonance spectroscopy between 213 and 293 K. The equilibrium constant was calculated for each temperature point and correlated to T ⁻¹ applying the Van't Hoff relationship lnK _R = (−ΔH _R ⁰/RT) + (ΔS _R ⁰/R). The reaction enthalpy was found to be 12.0 ± 0.9 kJ/mol and the bond strength in IOH (BDE_(O–H)) = 340.7 ± 3.0 kJ/mol. The thermochemical stabilization of the involved phenoxyls is discussed. Authors' address: Sara N. Mendiara, Departamento de Química, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Funes 3350, Mar del Plata 7600, Argentina     

Integral energy spectrum of primary cosmic rays at high energies

The integral energy spectrum of primary cosmic rays has been obtained. In the energy range (2.4×10³−1.1×10⁵ GeV), the spectrum of all nuclei is consistent with a power law of indexγ=1.55±0.06 and the flux of all nuclei is:N(⩾E ₀)⋍(5.1±1.8)×10⁻¹×E ₀ ^−1.55 particles/cm² sterad. sec., whereE ₀ is in GeV. The spectrum of primaryα-particles in the energy range (4.4×10³−4.8×10⁴) GeV is also consistent with a power law of indexγ=1.71±0.12 and the flux is:N(⩾E ₀)=(4.2±1.4)×10⁻¹×E ₀ ^−1.71 , particles per cm² sterad. sec, whereE ₀ is in GeV.