Far infrared spectrum,conformational stability,barriers to internal rotation,vibrational assignment,and ab initio calculations of 2-chloro-3-fluoropropene

The far infrared spectrum (375 to 30 cm^–1) of gaseous 2-chloro-3-fluoropropene, CH₂=C(CH₂F)CI, has been recorded at a resolution of 0.10 cm^–1. The fundamental asymmetric torsional mode is observed at 117.5 cm^–1 with ten excited states falling to low frequency for thes-cis (fluorine atom eclipsing the double bond) conformer. For the higher energy gauche conformer, the asymmetric torsion is estimated to be at 94 cm^–1. From these data the asymmetric torsional potential function has been calculated. The potential function coefficients are calculated to be in cm^–1):V ₁=803±21,V ₂=–94±21,V ₃= 1025±10,V ₄=95±10, andV ₆=2±1, with an enthalpy difference between the more stables-cis and gauche conformera of 550±100 cm^–1 (1.57±0.29 kcal/mol). This function gives values of 1227±50cm^–1(3.51±0.14kcal/mol), 1266±200 cm^–1 (3.62±0.57 kcal/mol), and 665±100 cm^–1 (1.90±0.29 kcal/mol), for thes-cis to gauche, gauche to gauche, and gauche tos-cis barriers, respectively. From the relative intensities of the Raman lines of the gas at 652 cm^–1 (gauche) and 731 cm^–1 (s-cis) as a function temperature, the enthalpy difference is found to be 565±96 cm^–1 (1.62±0.27 kcal/mol). However, the more polar gauche conformer remains in the crystalline solid. The Raman spectrum of the gas has been recorded from 3500 to 70 cm^–1 and, utilizing these data and the previously reported infrared data, a complete vibrational analysis is proposed for both conformers. The conformational stability, barriers to internal rotation, fundamental vibrational frequencies, and structural parameters that have been determined experimentally are compared to those obtained from ab initio Hartree-Fock gradient calculations employing both the 3–21 G^* and 6–31G^* basis sets and to the corresponding quantities for some similar molecules.     

Conformational analysis,barriers to internal rotation,vibrational assignment and ab initio calculations of chloroacetone

The infrared (3500-20 cm⁻¹) and Raman (3200-10 cm⁻¹) spectra have been recorded for gaseous and solid chloroacetone (1-chloro-2-propanone), CH₂ClC(O)CH₃. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. These data have been interpreted on the basis that the molecule exists predominantly in a gauche conformation having a “near cis” structure of C₁ symmetry (dih ClCCO=142°C) in the vapor but for the liquid a second conformer having a trans structure (chlorine atom oriented trans to the methyl group) with C_s point group symmetry is present. From a study of the Raman spectrum of the liquid at variable temperatures, the trans conformation has been determined to be more stable than the gauche form by 1042±203 cm⁻¹ (2.98±0.6 kcal mol⁻¹ and is the only conformer present in the spectrum of the annealed solid. From ab initio calculations at the 3-21G* and 6-31G* basis set levels optimized geometries for both the gauche and trans conformers have been obtained and the potential surfaces governing internal rotation of the symmetric and asymmetric rotors have been obtained. The observed vibrational frequencies and assignments to the fundamental vibrations for both the gauche and trans conformers are compared to those calculated with the 3-21G* basis set. The results are discussed and compared with the corresponding quantities obtained for some similar molecules.     

Conformational analysis,barriers to internal rotation,ab initio calculations and vibrational assignment of fluoroacetone

The infrared (3500-20 cm⁻¹) and Raman (3200-10 cm⁻¹) spectra have been recorded for gaseous and solid fluoroacetone (1-fluoro-2-propanone), CH₂FC(O)CH₃. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. These data have been interpreted on the basis that the molecule exists predominantly in the cis (fluorine atom oriented cis to the methyl group) conformation in the vapor but for the liquid a second conformer having a trans orientation (fluorine atom oriented trans to the methyl group) is present. From a study of the Raman spectrum of the liquid at variable temperatures the trans conformation has been determined to be more stable than the cis form by 416 ± 54 cm⁻¹ (1.19 ± 0.15 kcal mol⁻¹) and is the only conformation present in the spectrum of the annealed solid. The asymmetric torsional fundamental for the more stable cis conformer has been observed in the far infrared spectrum of the gas at 69.6 cm⁻¹ with six accompanying hot band transitions proceeding to lower frequency. The corresponding mode for the high energy trans conformer is extensively overlapped but is distinguishable at ∼65 cm⁻¹. From these data the asymmetric torsional potential function governing internal rotation about the CC bond has been determined and the potential coefficients are: V₁ = 675 ± 2, V₂ = 991 ± 5, V₃ = 74 ± 1 and V₄ = 54 ± 2 cm⁻¹. The cis to trans and trans to cis barriers are 1332 ± 5 and 731 ± 5 cm⁻¹, respectively, with an enthalpy difference of 601 ± 8 cm⁻¹ (1.72 ± 0.02 kcal mol⁻¹). From ab initio calculations at the 3-21G and 6-31G* basis set levels optimized geometries for both the cis and trans conformers have been obtained and the potential surface governing internal rotation of the asymmetric top determined. The observed vibrational frequencies with their assignments for both the cis and trans conformers are compared to those from the ab initio calculations. All of these results are compared to the corresponding quantities for some similar molecules.     

Conformational stability,barriers to internal rotation,structural parameters,ab initio calculations,and vibrational assignment of cyclopropanecarboxaldehyde

The asymmetric torsional potential function, conformational energy difference, vibrational frequencies, and structural parameters of Cyclopropane-carboxaldehyde have been obtained from ab initio calculations at the 3–21G and/or 6-31G^* baiss set levels. These results have allowed for a reinterpretation or clarification of some of the corresponding results obtained from experiment. The conformations that have the oxygen atom oriented cis and trans to the three-membered ring are observed and calculated to be the most stable and high energy forms in the gaseous phase, respectively. From the ab initio calculations using the 6–31 G^* basis set, the energy difference between the two conformers is 114 cm^–1. For the liquid, the trans conformer is more stable and is the only rotamer present in the annealed solid. Based on a combination of results obtained from ab initio calculations, microwave spectroscopy, and the electron diffraction technique,r _o structural parameters have been obtained for both conformations.     

Raman and infrared spectra, conformational stability, barriers to internal rotation, vibrational assignment, and ab initio calculations of 3-methyl-3-butenenitrile

The Raman (3500-30 cm⁻¹) spectra of liquid and solid and the infrared (3500-40 cm⁻¹) spectra of gaseous and solid 3-methyl-3-butenenitrile, CH₂C(CH₃)CH₂CN, have been recorded. Both cis and gauche conformers have been identified in the fluid phases but only the cis form remains in the solid. Variable temperature (−55 to −100 °C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 163±16 cm⁻¹ (1.20±0.19 kJ mol⁻¹), with the cis conformer the more stable rotamer. It is estimated that there is 48±2% of the gauche conformer present at  25°C. A complete vibrational assignment is proposed for the cis conformer based on infrared band contours, relative intensities, depolarization ratios and group frequencies. Several of the fundamentals for the gauche conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been obtained for both rotamers by ab initio calculations employing the 6-31G(d), 6-311G(d,p), 6-311+G(d,p) and 6-311+G(2d,2p) basis sets at the levels of restricted Hartree-Fock (HF) and/or Møller-Plesset perturbation theory to the second order (MP2). Only with the 6-311G(2d,2p) and 6-311G(2df,2pd) basis sets with or without diffuse functions is the cis conformer predicted to be more stable than the gauche form. The potential energy terms for the conformational interchange have been obtained at the MP2(full)/6-311+G(2d,2p) level, and compared to those obtained from the experimental data. The results are discussed and compared to the corresponding quantities obtained for some similar molecules.     

Infrared and raman spectra,conformational stability,barriers to internal rotation,ab initio calculations and vibrational assignment of difluoroacetyl chloride

The Raman (3100–10 cm⁻¹) and infrared (3100–30 cm⁻¹) spectra of difluoroacetyl chloride, CHF₂CClO, in the gas and solid phases have been recorded. Additionally, the Raman spectrum of the liquid with qualitative depolarization ratios has been obtained. From these data, a trans/gauche equilibrium is proposed in the gas and liquid phases, with the trans conformer (hydrogen atom eclipsing the oxygen atom and trans to the chlorine atom) the more stable form in the gas, but the gauche rotamer is more stable in the liquid and is the only form present in the annealed solid. From the study of the Raman spectrum of the gas at different temperatures, a value of 272 ± 115 cm⁻¹ (778 ± 329 cal mol⁻¹) was determined for ΔH, with the trans conformer the more stable form. Similar studies were carried out on the liquid and a value of 109 ± 9 cm⁻¹ (312 ± 26 cal mol⁻¹) was obtained for ΔH, but now the gauche conformer is the more stable form. A potential function for the conformational interchange has been determined with the following potential constants: V₁ = 397 ± 23, V₂ = −101 ± 5, V₃ = 474 ± 3, V₄ = −50 ± 3, and V₆ = 10 ± 2 cm⁻¹. This potential has the trans rotamer more stable by 179 ± 31 cm⁻¹ (512 ± 89 cal mol⁻¹) than the gauche conformer. A complete vibrational assignment is proposed for both conformers based on infrared band contours, Raman depolarization data, group frequencies and normal coordinate calculations. The experimental conformational stability, barriers to internal rotation, and fundamental vibrational frequencies are compared with those obtained from ab initio Hartree-Fock gradient calculations employing both the RHF/3-21G^* and RHF/6-31G^* basis sets, and to the corresponding quantities obtained for some similar molecules.     

Infrared and Raman spectra,conformational stability,barriers to internal rotation,ab initio calculations and vibrational assignment of ethyl methyl selenide

The Raman spectra (3200–10 cm⁻¹) of ethyl methyl selenide in the gas, liquid and solid phases and the infrared spectra (3200–30 cm⁻¹) of the gas and solid have been recorded. Qualitative depolarization ratios have been obtained for the lines in the Raman spectrum of the liquid. By a variable temperature Raman study of the liquid, it has been determined that the gauche conformer is more stable than the trans rotamer by 158±16 cm⁻¹ (452±46 cal mol⁻¹), and the gauche conformer is the rotamer present in the solid. A complete vibrational assignment for the gauche conformer is presented. All of these data are compared to the corresponding quantities obtained from ab initio Hartree—Fock gradient calculations employing the STO-3G* and 4–31G*/MIDI-4* basis sets. Complete equilibrium geometries have been calculated for both rotamers and the results are discussed and compared with the corresponding quantities for some similar molecules.     

Conformational stability, r 0 structural parameters, barriers to internal rotation, ab initio calculations, and vibrational assignment for 2,2-difluoroethanol

The infrared spectra (4,000–30 cm^?1) of the gas and solid and the Raman spectrum of liquid 2,2-difluoroethanol as well as variable temperature infrared spectra of krypton/xenon solutions have been recorded. From all these data, two (Gg and Tg) out of the five possible stable conformers have been confidently identified. The order of the stabilities has been predicted to be Gg > Tg > Gt > Gg′ > Tt by utilizing ab initio MP2 (full) and DFT (B3LYP method) calculations, where the first indicator (capital letter) is in reference to rotation around the C–C bond (G = gauche or T = trans) and the second one (small letter) refers to the orientation of the hydroxyl group. The percentage of the minor conformer Tg, at ambient temperature, is estimated to be (16 ± 3%). The optimized geometries, fundamental frequencies, infrared intensities, Raman activities, and depolarization values as well as centrifugal distortion constants have been obtained from ab initio and density functional theory calculations by utilizing a variety of basis sets as well as those with diffuse functions. By utilizing the previously reported microwave rotational constants for two isotopomers of the Gg conformer combined with ab initio MP2(full)/6-311+G(d,p) predicted structural values, adjusted r ₀ parameters have been obtained. The determined heavy atom distances (Å) for the Gg conformer are: C₁–C₂ = 1.510(3), C₂–F₄ = 1.371(3), C₂–F₅ = 1.362(3), C₁–O₃ = 1.412(3) Å and angles ∠O₃C₁C₂ = 111.0(5), ∠F₄C₂C₁ = 108.8(5), ∠F₅C₂C₁ = 109.8(5), τF₄C₂C₁O₃ = 63.5(5), τF₅C₂C₁O₃ = 179.1(5)°. Barriers of internal rotation have been obtained and vibrational assignments for the Gg and Tg conformers are given. The five predicted centrifugal distortion constants compared to the experimental values are in reasonable agreement except for ?_K, which appears to be in error. The results are discussed and the structural parameters compared to the corresponding ones for 2-fluoroethanol and 2,2,2-trifluoroethanol where those for the latter molecule have been redetermined. The currently determined heavy atom parameters are quite different from the earlier assumed values, which led to poor values of the six adjusted parameters.     

Far-infrared spectrum,conformational stability,barriers to internal rotation,normal coordinate calculations,and vibrational assignment for chloroacetaldehyde

The far infrared spectrum [350 to 25 cm^–1] of gaseous chloroacetaldehyde, ClCH₂CHO, has been recorded at a resolution of 0.10 cm^–1. The first excited-state transition of the asymmetric torsion of the more stable near s-cis [chlorine atom s-cis to the aldehyde hydrogen atom] conformer has been observed at 26.9 cm^–1, with seven additional upper state transitions falling to higher frequency. Additionally, the fundamental torsional transition of the s-trans conformer has been observed at 58.9 cm^–1 with two excited states also falling to higher frequency. From these data, the asymmetric torsional potential coefficients have been determined to be:V ₁=414±11;V ₂ = 191±3;V ₃=–203±5;V ₄=44±1 andV ₆=–26±1 cm^–1. The s-cis to s-trans barrier is 500±5 cm^–1 (1.43±0.01 kcal mol^–1) with the s-cis conformer being more stable by 267±19 cm^–1 (0.76±0.05 kcal mol^–1) than the s-trans form. The Raman [4000 to 100 cm^–1] and infrared (4000 to 400 cm^–1] spectra of the gas have been recorded. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values obtained. Complete vibrational assignments are proposed for both conformers based on band contours, depolarization values, and group frequencies. The assignments are supported by ab initio Hartree-Fock gradient calculations employing the 3–21G^* basis set to obtain the frequencies and the potential energy distributions for the normal vibrations for both rotamers. Additional ab initio calculations at the MP4/6-31G^* level have been carried out to determine the structural parameters for both conformers. The results are discussed and compared with the corresponding quantities obtained for some similar molecules.This contribution taken in part from the thesis of C. L. Tolley which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree.     

Raman and infrared spectra,conformational stability,barriers to internal rotation,r 0 structural parameters,ab initio calculations,and vibrational assignment for vinyl chloroformate

The Raman (3200 to 10 cm^–1) and infrared (3500 to 50 cm^–1) spectra of vinyl chloroformate, H₂C=CHOC(O)Cl, have been recorded for both the gas and solid. Additionally, the Raman spectrum of the liquid has been recorded, and depolarization ratios have been obtained. These data have been interpreted on the basis that the only stable conformation present at ambient temperature is thetrans-trans rotamer, where the firsttrans refers to the vinyl moiety relative to the O—CCl bond and the second to the C—Cl bond relative to the=C—O bond. Using harmonic rigid asymmetric top calculations, the infrared vapor phase contours for the C=O and the C=C stretch were predicted for thetrans-trans and for thecis-trans conformer, and were compared with experiment. For both fundamentals thetrans-trans hybrid reproduces the experimental contour, whereas thecis-trans contours fail to do so for both fundamentals. From far-infrared spectrum of the vapor obtained at 0.1 cm^–1 resolution, the C(O)Cl andO-vinyl torsional fundamentals have been observed at 132 and 61 cm^–1, respectively. Ther ₀ structural parameters have been obtained from a combination of ab initio calculated parameters with appropriate offset values and the fit of the microwave rotational constants for the two naturally occurring chlorine isotopes. The structure, barrier to internal rotation, and vibrational frequencies have been determined from ab initio Hartree-Fock gradient calculations, using the 3-21G^* and 6-31G^* basis sets. These results are compared to those obtained experimentally and to similar quantities for some related molecules.     

Conformational stability, vibrational assignmenents, barriers to internal rotations and ab initio calculations of 2-aminophenol (d 0 and d3)

The Raman (3700-100 cm(-1)) and infrared (4000-400 cm(-1)) spectra of solid 2-aminophenol (2AP) have been recorded. The internal rotation of both OH and NH2 moieties produce ten conformers with either Cs or C1 symmetry. However, the calculated energies as well as the imaginary vibrational frequencies reduce rotational isomerism to five isomers. The molecular geometry has been optimized without any constraints using RHF, MP2 and B3LYP levels of theory at 6-31G(d), 6-311+G(d) and 6-31++G(d,p) basis sets. All calculations predict 1 (cis; OH is directed towards NH2) to be the most stable conformation except RHF/6-31++G(d,p) basis set. The 1 (cis) isomer is found to be more stable than 8 (trans; OH is away from the NH2 moiety and the NH bonds are out-of-plane) by 1.7 kcal/mol (598 cm(-1)) as obtained from MP2/6-31G(d) calculations. Aided by experimental and theoretical vibrational spectra, cis and trans 2AP are coexist in solution but cis isomer is more likely present in the crystalline state. Aided by MP2 and B3LYP frequency calculations, molecular force fields, simulated vibrational spectra utilizing 6-31G(d) basis set as well as normal coordinate analysis, complete vibrational assignments for HOC6H4NH2 and DOC6H4ND2 have been proposed. Furthermore, we carried out potential surface scan, to determine the barriers to internal rotations of NH2 and OH groups. All results are reported herein and compared with similar molecules when appropriate.     

Infrared and Raman spectra, conformational stability, ab initio calculations and vibrational assignment of 2-fluorobutane

The infrared spectra (3500-50 cm-1) of gas and solid and the Raman spectrum (3500-50 cm-1) of liquid 2-fluorobutane, CH3CHFCH2CH3, have been recorded. Variable temperature studies over the range -105 to -150 degrees C of the infrared spectra (3500-400 cm-1) of the sample dissolved in liquid krypton have also been recorded. By utilizing the relative intensities of six conformer pairs each for both Me-trans/F-trans and Me-trans/H-trans, the Me-trans conformer is found to be the lowest energy form with an enthalpy difference to the F-trans conformer of 102 +/- 10 cm-1 ( 1.21+/- 0.12 kJmol-1) whereas the H-trans conformer is the highest energy form with an enthalpy difference of 208 +/- 21 cm-1 ( 2.49 +/- 0.25 kJmol-1) higher than the Me-trans form. At ambient temperature, it is estimated that there is 50 +/- 2% of the Me-trans form, 31 +/- 1% of the F-trans form, and 19 +/- 1% of the H-trans conformer present. Equilibrium geometries and total energies of the three conformers have been determined by ab initio calculations with full electron correlation by the perturbation method to second order using a number of basis sets. A complete vibrational assignment is proposed for the Me-trans conformer and many of the fundamentals have been identified for the other two forms based on the force constants, relative infrared and Raman intensities, and depolarization ratios obtained from MP2/6-31Gd ab initio calculations. The spectroscopic and theoretical results are compared to the corresponding properties for some similar molecules.     

Far-infrared spectrum,barrier to internal rotation,ro structure,and ab initio calculations for acetylacetylene

The far-infrared spectrum has been recorded from 50 to 360 cm^–1 at a resolution of 0.10 cm^–1 for acetyiacetylene (1-butyne-3-one], CH₃C(O)CCH. The fundamental methyl torsion has been observed at 117.94 cm^–1, from which a periodic barrier to internal rotation has been calculated to be 346 cm^–1 (989 cal mol^–1]. Infrared spectra (3500-50 cm^–1] of the gas and solid and the Raman spectra (3500-100 cm^–1) of the gas, liquid, and solid are reported. Utilizing previously reported rotational constants for three isotopic species,r _o structural parameters have been determined for the heavy-atom skeleton. The fundamental vibrational frequencies, barrier to internal rotation, and structural parameters that have been obtained experimentally are compared to those obtained from ab initio Hartree-Fock calculations employing 3-21G, 6-31G, and DZ basis sets and to the corresponding quantities for some similar molecules.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Infrared spectra,vibrational assignment and ab initio calculations for 2,2,2-trifluoroethanimidamide

The infrared spectra of gaseous and solid 2,2,2-trifluoroethanimidamide, CF₃(NH₂)C=NH, have been recorded from 4000 to 80 cm^–1. A vibrational assignment for the normal modes is proposed based on group frequencies and normal coordinate calculations utilizing C₁ symmetry. The structures for both the cis [hydrogen atom of the =NH group is cis to the NH₂ group] and trans geometric isomers have been determined from ab initio Hartree-Fock gradient calculations employing the GAUSSIAN-82 program with the 3–21G basis set. The most stable conformer at this level of calculation is found to be a C₁, structure with a partially rotated CF₃ group and the hydrogen atom of the imine group trans to the NH₂ group. The calculated structural parameters have only very small differences between the conformers. Barriers to internal rotation for the NH₂ and CF₃ groups and vibrational frequencies have been calculated for the C₁ form. The results of this investigation are compared with similar data on some corresponding molecules.Taken in part from the thesis of T. G. Sheehan which was submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree, May 1990.     

Vibrational spectra,conformational stability,barriers to internal rotation,r0 structural parameters and ab initio calculations of fluoromethyl methyl ether

The far-infrared spectrum of gaseous fluoromethyl methyl ether, FCH₂OCH₃, along with three of the deuterium isotopes, has been recorded at a resolution of 0.10 cm^–1 in the 350 to 50 cm^–1 region. The fundamental asymmetric torsional and methyl torsional modes are extensively mixed and have been observed at 182 and 132 cm^–1, respectively, for the stablegauche conformer with the lower frequency band having several excited states falling to lower frequency. An estimate is given for the potential function governing the asymmetric rotation. On the basis of a one-dimensional model the barrier to internal rotation of the methyl moiety is determined to be 527±9 cm^–1 (1.51±0.03 kcal/mol). A complete assignment of the vibrational fundamentals for all four isotopic species observed from the infrared (3500 to 50 cm^–1) spectra of the gas and solid and from the Raman (3200 to 10 cm^–1) spectra of the gas, liquid, and solid is proposed. No evidence could be found in any of the spectra for the high-energytrans conformer. All of these data are compared to the corresponding quantities obtained from ab initio Hartree-Fock gradient calculations employing the 3-21G and 6-31G* basis sets along with the 6-31G* basis set with electron correlation at the MP2 level. Additionally, completer ₀ geometries have been determined from the previously reported microwave data and carbon-hydrogen distances determined from infrared studies. The heavy-atom structural parameters (distances in Å, angles in degrees) arer(C₁-F) = 1.395 ± 0.005;r(C₁-O) = 1.368 ± 0.007;r(C₂-O) = 1.426 ±0.003; FC₁O = 111.33 ± 0.25; C₁OC₂ = 113.50 ± 0.18 and dih FC₁OC₂ = 69.12 ± 0.26. All of these results are discussed and compared with the corresponding quantities obtained for some similar molecules.     

Conformational analysis,barriers to internal rotation and vibrational assignment for dimethylethylamine

The IR (50–3500 cm^?1) and Raman (20–3500 cm^?1) spectra have been recorded for gaseous and solid dimethylethylamine. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. Due to the fact that three distinct Raman lines disappear on going from the fluid phases to the solid state, it is concluded that the molecule exists as a mixture of the gauche and trans conformers in the fluid phases with the gauche conformer being more stable and the only one present in the spectra of the unannealed solid. From the temperature study of the Raman spectrum of the liquid a rough estimate of 3.9 kcal mol^?1 has been obtained for ΔH. Relying mainly on group frequencies and relative intensities of the IR and Raman lines, a complete vibrational assignment is proposed for the gauche conformer. The potential functions for the three methyl rotors have been obtained, and the barriers to internal rotation for the two CH₃ rotors attached to the nitrogen atom have been calculated to be 3.51 and 3.43 kcal mol^?1, whereas the barrier for the CH₃ rotor of the ethyl group has been calculated to be 3.71 kcal mol^?1. The asymmetric torsional mode for the gauche conformer has been observed in both the IR and Raman spectra of the gas at 105 cm^?1 with at least one hot band at a lower frequency. Since the corresponding mode has not been observed for the trans conformer, it is not possible to obtain the potential function for the asymmetric rotation although estimates on the magnitudes of some of the terms have been made. Significant changes occur in the low-frequency IR and Raman spectra of the solid with repeated annealing; several possible reasons for these changes are discussed and one possible explanation is that a conformational change is taking place in the solid where the trans form is stabilized by crystal packing forces. These results are compared to the corresponding quantities for some similar amines.     

Conformational stability,barriers to internal rotation,normal coordinate analysis,and vibrational assignment of chloroacetyl bromide

The infrared spectra (3200 to 30 cm^–1) of gaseous and solid chloroacetyl bromide, CH₂ClC(O)Br, and the Raman spectra (3200 to 10 cm^–1) of the gas, liquid (with depolarization data), and solid have been recorded. From the observed asymmetric torsional transitions, the potential function governing internal rotation of the CH₂Cl moiety has been determined with the following coefficients:V ₁=336±11,V ₂=73±10,V ₃=757+7,V ₄=103±3, andV ₆=5±2 cm^–1. This potential function is consistent with s-trans to gauche and gauche to gauche barriers of 963±11 and 709±12cm^–1, respectively, and enthalpy difference of 373 ± 24 cm^–1 with the dihedral angle of the gauche rotamer being 115°. The enthalpy difference has been determined experimentally from the studies of the Raman spectra at different temperatures to be 359±68 cm^–1 (1.03±0.19 kcal mol^–1) and 507±24 cm^–1 (1.45±0.07 kcal mol^–1) for the gas and liquid, respectively, with the s-trans conformer being the more stable conformer in the gas and liquid and the only one present in the annealed solid. A complete assignment of the vibrational fundamentals is proposed from spectral data obtained for the gas, liquid, and solid. The assignment is supported by a normal coordinate calculation utilizing a modified valence force field to obtain the frequencies for the normal vibrations and the potential energy distribution. The results are discussed and compared to the corresponding quantities for some similar molecules.Taken in part from the thesis of H. V. Phan, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree.     

Raman spectra,conformational stability,structural parameters,vibrational assignment,and ab initio calculations for epifluorohydrin

The Raman spectra (3200–100 cm⁻¹) of epifluorohydrin, OCH₂CH(CH₂F), in variable solvents, as well as that of the gas have been recorded and several of the bands due to the two less stable conformers have been identified. The variable solvent studies were inconclusive on the relative conformer stabilities. The conformational energy differences and optimized geometries for all three conformers have been obtained from ab initio calculations with the 3–21G, 4–31G and 6–31G* basis sets. A normal coordinate analysis has also been performed for each conformer with a force field determined from the 3–21G basis set. Assignment of the vibrational fundamentals observed in the Raman spectra of the fluid phases is proposed based on the normal coordinate calculations. In the liquid phase, one of the conformers with a large dipole moment predominates and it appears to be the gauche-I form which is the only one found in the solid. Utilizing the three rotational constants previously reported for each conformer, along with restricted relative distances for several of the structural parameters among the conformers from ab initio calculations, r₀ structural parameters for the heavy atoms have been determined.     

Infrared and Raman spectra,conformational stability,vibrational assignment and ab initio calculations of methylvinyl silyl chloride

The infrared spectra (3200-50 cm(-1)) of gaseous and solid and Raman spectra (3200-10 cm(-1)) of the liquid and solid methylvinyl silyl chloride, CH(2)=CHSiH(CH(3))Cl, and the Si-d isotopomer have been recorded. The three expected stable conformers (the three different groups eclipsing the double bond) have been identified in the fluid phase, but it was not possible to obtain an annealed solid with a single conformer. Variable temperature (-105 to -150 degrees C) studies of the infrared spectra of the sample dissolved in liquid krypton has been carried out. From these data the enthalpy differences between the most stable conformer with the hydrogen atom (HE) eclipsing the double bond to that with the chlorine atom (ClE) and the methyl group (ME) eclipsing the double bond have been determined to be 17+/-4 cm(-1) (203+/-48 Jmol(-1)) and 80+/-12 cm(-1) (957+/-144 Jmol(-1)), respectively. However in the liquid state the ME conformer is the most stable form with enthalpy differences of 13+/-4 and 27+/-7 cm(-1) to the HE and ClE rotamers, respectively. It is estimated that there is 39% of the HE conformer, 35% of the ClE conformer, and 26% of the ME conformer present at ambient temperature. A complete vibration assignment is proposed for the HE conformer which is based on infrared band contours and group frequencies, which is supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G(d) calculations. Additionally, several of the fundamentals for the other two conformers have been assigned. The optimal geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies are reported for all three conformers from MP2/6-31G(d,p) ab initio calculations with full electron correlation. Optimized geometrical parameters and conformational stabilities have been obtained from MP2/6-311+G(d,p) calculations. At this highest level of calculations, the HE conformer is predicted to be more stable by 62 and 84 cm(-1) than the ME and ClE conformers, respectively. The coefficients from the potential function governing the conformational interchange have been obtained from the MP2/6-31G(d) ab initio calculations. By utilizing the frequency of the SiH stretching mode, the r(0)-H distance has been determined to be 1.481 A for the HE conformer. The ab initio calculated quantities are compared to the experimentally determined values where applicable, as well as to some corresponding results for some similar molecules.