Spectra and structure of silicon compounds. XVII Raman and infrared spectra and vibrational assignment for hexamethyldisilane and ab initio calculations for disilane and hexamethyldisilane

The IR spectra of gaseous and solid hexamethyldisilane between 4000 and 25 cm⁻¹ and the far-IR spectrum of the liquids from 450 to 25 cm⁻¹ have been recorded. The Raman spectra have been recorded from 3500 to 10 cm⁻¹ for all three physical phases. Assisted by ab initio calculations, the vibrational spectrum of hexamethyldisilane has been assigned under D_3d symmetry and the results of a normal coordinate analysis are discussed. No spectral features indicative of free internal rotation have been observed. Gradient ab initio calculations have been carried out for the disilane and hexamethyldisilane molecules using different types of basis sets. The structural parameters, rotational constants, unscaled and scaled frequencies and harmonic force constants have been reported for both disilane and hexamethyldisilane.     

Infrared and Raman spectra,conformational stability,barriers to internal rotation,ab initio calculations and vibrational assignment of ethyl methyl selenide

The Raman spectra (3200–10 cm⁻¹) of ethyl methyl selenide in the gas, liquid and solid phases and the infrared spectra (3200–30 cm⁻¹) of the gas and solid have been recorded. Qualitative depolarization ratios have been obtained for the lines in the Raman spectrum of the liquid. By a variable temperature Raman study of the liquid, it has been determined that the gauche conformer is more stable than the trans rotamer by 158±16 cm⁻¹ (452±46 cal mol⁻¹), and the gauche conformer is the rotamer present in the solid. A complete vibrational assignment for the gauche conformer is presented. All of these data are compared to the corresponding quantities obtained from ab initio Hartree—Fock gradient calculations employing the STO-3G* and 4–31G*/MIDI-4* basis sets. Complete equilibrium geometries have been calculated for both rotamers and the results are discussed and compared with the corresponding quantities for some similar molecules.     

Conformational analysis,barriers to internal rotation,ab initio calculations and vibrational assignment of fluoroacetone

The infrared (3500-20 cm⁻¹) and Raman (3200-10 cm⁻¹) spectra have been recorded for gaseous and solid fluoroacetone (1-fluoro-2-propanone), CH₂FC(O)CH₃. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. These data have been interpreted on the basis that the molecule exists predominantly in the cis (fluorine atom oriented cis to the methyl group) conformation in the vapor but for the liquid a second conformer having a trans orientation (fluorine atom oriented trans to the methyl group) is present. From a study of the Raman spectrum of the liquid at variable temperatures the trans conformation has been determined to be more stable than the cis form by 416 ± 54 cm⁻¹ (1.19 ± 0.15 kcal mol⁻¹) and is the only conformation present in the spectrum of the annealed solid. The asymmetric torsional fundamental for the more stable cis conformer has been observed in the far infrared spectrum of the gas at 69.6 cm⁻¹ with six accompanying hot band transitions proceeding to lower frequency. The corresponding mode for the high energy trans conformer is extensively overlapped but is distinguishable at ∼65 cm⁻¹. From these data the asymmetric torsional potential function governing internal rotation about the CC bond has been determined and the potential coefficients are: V₁ = 675 ± 2, V₂ = 991 ± 5, V₃ = 74 ± 1 and V₄ = 54 ± 2 cm⁻¹. The cis to trans and trans to cis barriers are 1332 ± 5 and 731 ± 5 cm⁻¹, respectively, with an enthalpy difference of 601 ± 8 cm⁻¹ (1.72 ± 0.02 kcal mol⁻¹). From ab initio calculations at the 3-21G and 6-31G* basis set levels optimized geometries for both the cis and trans conformers have been obtained and the potential surface governing internal rotation of the asymmetric top determined. The observed vibrational frequencies with their assignments for both the cis and trans conformers are compared to those from the ab initio calculations. All of these results are compared to the corresponding quantities for some similar molecules.     

Raman spectra,conformational stability,structural parameters,vibrational assignment,and ab initio calculations for epifluorohydrin

The Raman spectra (3200–100 cm⁻¹) of epifluorohydrin, OCH₂CH(CH₂F), in variable solvents, as well as that of the gas have been recorded and several of the bands due to the two less stable conformers have been identified. The variable solvent studies were inconclusive on the relative conformer stabilities. The conformational energy differences and optimized geometries for all three conformers have been obtained from ab initio calculations with the 3–21G, 4–31G and 6–31G* basis sets. A normal coordinate analysis has also been performed for each conformer with a force field determined from the 3–21G basis set. Assignment of the vibrational fundamentals observed in the Raman spectra of the fluid phases is proposed based on the normal coordinate calculations. In the liquid phase, one of the conformers with a large dipole moment predominates and it appears to be the gauche-I form which is the only one found in the solid. Utilizing the three rotational constants previously reported for each conformer, along with restricted relative distances for several of the structural parameters among the conformers from ab initio calculations, r₀ structural parameters for the heavy atoms have been determined.     

Conformational analysis,barriers to internal rotation,vibrational assignment and ab initio calculations of chloroacetone

The infrared (3500-20 cm⁻¹) and Raman (3200-10 cm⁻¹) spectra have been recorded for gaseous and solid chloroacetone (1-chloro-2-propanone), CH₂ClC(O)CH₃. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. These data have been interpreted on the basis that the molecule exists predominantly in a gauche conformation having a “near cis” structure of C₁ symmetry (dih ClCCO=142°C) in the vapor but for the liquid a second conformer having a trans structure (chlorine atom oriented trans to the methyl group) with C_s point group symmetry is present. From a study of the Raman spectrum of the liquid at variable temperatures, the trans conformation has been determined to be more stable than the gauche form by 1042±203 cm⁻¹ (2.98±0.6 kcal mol⁻¹ and is the only conformer present in the spectrum of the annealed solid. From ab initio calculations at the 3-21G* and 6-31G* basis set levels optimized geometries for both the gauche and trans conformers have been obtained and the potential surfaces governing internal rotation of the symmetric and asymmetric rotors have been obtained. The observed vibrational frequencies and assignments to the fundamental vibrations for both the gauche and trans conformers are compared to those calculated with the 3-21G* basis set. The results are discussed and compared with the corresponding quantities obtained for some similar molecules.     

Structure,vibrational assignment,normal coordinate analysis,and ab initio calculations of methylisocyanate

The infrared (3200-30 cm⁻¹) and Raman (3200-10 cm⁻¹) spectra of gaseous and solid methylisocyanate, CH3NCO, have been recorded. Additionally, the Raman spectrum of the liquid has been obtained and qualitative depolarization ratios have been measured. The CNC bend has been observed in the far infrared and low frequency Raman spectra of the gas at approximately 172 cm⁻¹. An additional far infrared band at ≈50 cm⁻¹ has tentatively been assigned as the methyl torsional mode, although it could be due to the Δν = 1, Δl = ± 1 transitions of the CNC bending mode. A complete assignment of the vibrational fundamentals is proposed. The structural parameters, force constants, and vibrational frequencies have been determined from ab initio Hartree—Fock gradient calculations using the 6-31G* basis set. Additionally, structural parameters have been obtained with the 6-311 + + G** basis set with electron correlation at the MP2 level which are compared to those obtained from the microwave data and electron diffraction study. These results are compared with the corresponding quantities obtained for similar molecules.     

Infrared and raman spectra,conformational stability,barriers to internal rotation,ab initio calculations and vibrational assignment of difluoroacetyl chloride

The Raman (3100–10 cm⁻¹) and infrared (3100–30 cm⁻¹) spectra of difluoroacetyl chloride, CHF₂CClO, in the gas and solid phases have been recorded. Additionally, the Raman spectrum of the liquid with qualitative depolarization ratios has been obtained. From these data, a trans/gauche equilibrium is proposed in the gas and liquid phases, with the trans conformer (hydrogen atom eclipsing the oxygen atom and trans to the chlorine atom) the more stable form in the gas, but the gauche rotamer is more stable in the liquid and is the only form present in the annealed solid. From the study of the Raman spectrum of the gas at different temperatures, a value of 272 ± 115 cm⁻¹ (778 ± 329 cal mol⁻¹) was determined for ΔH, with the trans conformer the more stable form. Similar studies were carried out on the liquid and a value of 109 ± 9 cm⁻¹ (312 ± 26 cal mol⁻¹) was obtained for ΔH, but now the gauche conformer is the more stable form. A potential function for the conformational interchange has been determined with the following potential constants: V₁ = 397 ± 23, V₂ = −101 ± 5, V₃ = 474 ± 3, V₄ = −50 ± 3, and V₆ = 10 ± 2 cm⁻¹. This potential has the trans rotamer more stable by 179 ± 31 cm⁻¹ (512 ± 89 cal mol⁻¹) than the gauche conformer. A complete vibrational assignment is proposed for both conformers based on infrared band contours, Raman depolarization data, group frequencies and normal coordinate calculations. The experimental conformational stability, barriers to internal rotation, and fundamental vibrational frequencies are compared with those obtained from ab initio Hartree-Fock gradient calculations employing both the RHF/3-21G^* and RHF/6-31G^* basis sets, and to the corresponding quantities obtained for some similar molecules.     

Spectra and structure of small ring compounds—LX. Raman and infrared spectra,conformational stability,normal coordinate analysis,and ab initio calculations of cyclobutyl acetylene

The Raman spectra (3400 to 10 cm⁻¹ of gaseous, liquid (with qualitative depolarization values) and solid cyclobutyl acetylene, c-C₄H₇CCH, have been recorded. Additionally, the infrared spectra (3500 to 90 cm⁻¹ of the gas and solid have been obtained. The spectra of the fluid phases are consistent with two stable conformers existing at ambient temperature. These data have been interpreted on the basis that the equatorial conformer is more stable than the high energy axial form in both the gas- and liquid-phases, and is the only conformer present in the solid. Two Q-branches are observed in the low frequency vibrational spectra of the gas at 133 and 118 cm⁻¹ and are assigned to the fundamental ring puckering vibration and an associated upper state transition of the low energy equatorial conformer. These data have been used to approximate the form of the potential function governing ring inversion. Experimental values for the enthalpy difference between the two conformers have been determined for both the gas, 282 ± 49 cm⁻¹, and the liquid, 181 ± 15 cm⁻¹, from relative intensities of a pair of Raman lines over 71 and 100°C temperature ranges, respectively. The structure, conformational stability, inversion barrier and vibrational frequencies have been determined by ab initio calculations using the 3-21G and/or 6-31G* basis sets. These calculated results are discussed in comparison to those determined from experiment and to corresponding quantities for some similar molecules.     

Conformational analysis,barriers to internal rotation and vibrational assignment for dimethylethylamine

The IR (50–3500 cm^?1) and Raman (20–3500 cm^?1) spectra have been recorded for gaseous and solid dimethylethylamine. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. Due to the fact that three distinct Raman lines disappear on going from the fluid phases to the solid state, it is concluded that the molecule exists as a mixture of the gauche and trans conformers in the fluid phases with the gauche conformer being more stable and the only one present in the spectra of the unannealed solid. From the temperature study of the Raman spectrum of the liquid a rough estimate of 3.9 kcal mol^?1 has been obtained for ΔH. Relying mainly on group frequencies and relative intensities of the IR and Raman lines, a complete vibrational assignment is proposed for the gauche conformer. The potential functions for the three methyl rotors have been obtained, and the barriers to internal rotation for the two CH₃ rotors attached to the nitrogen atom have been calculated to be 3.51 and 3.43 kcal mol^?1, whereas the barrier for the CH₃ rotor of the ethyl group has been calculated to be 3.71 kcal mol^?1. The asymmetric torsional mode for the gauche conformer has been observed in both the IR and Raman spectra of the gas at 105 cm^?1 with at least one hot band at a lower frequency. Since the corresponding mode has not been observed for the trans conformer, it is not possible to obtain the potential function for the asymmetric rotation although estimates on the magnitudes of some of the terms have been made. Significant changes occur in the low-frequency IR and Raman spectra of the solid with repeated annealing; several possible reasons for these changes are discussed and one possible explanation is that a conformational change is taking place in the solid where the trans form is stabilized by crystal packing forces. These results are compared to the corresponding quantities for some similar amines.     

FT-Raman and infrared spectra,r0 structural parameters,ab initio calculations and vibrational assignment for nitryl chloride

The FT-Raman spectra (2000-30 cm⁻¹) of liquid and solid nitryl chloride, ClNO₂, along with the infrared spectra (2000-80 cm⁻¹) of the gas and solid have been recorded. All six fundamentals are confidently identified and the potential energy distributions determined from the force fields obtained from ab initio calculations. Several different basis sets have been utilized to determine the harmonic frequencies and force constants which are compared to the previously reported valence force constants. Structural parameters have been calculated with these basis sets including electron correlation with MP2, MP3 and MP4 perturbation. The calculated equilibrium structural parameters are compared to the experimental r₀ structural parameters. The spectra of the solid indicate that there are at least two molecules per primitive cell. All of these results are compared to the corresponding quantities for some similar molecules.     

Conformational Stability, Raman and Infrared Spectra, Vibrational Assignment, and Ab Initio Calculations of Allyltrifluorosilane

The Raman spectra (3500 to 30 cm^–1) of allyltrifluorosilane, CH₂CHCH₂SiF₃, in the liquid with quantitative depolarization ratios and solid states, and the infrared spectra (3500 to 30 cm^–1) of the gas and solid have been recorded. Additionally, the mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (–100° to –55°C) have been recorded. All of these data indicate there are two conformers, the more stable gauche rotamer and a very small amount of the cis conformer in the fluid states, but only the gauche form remains in the polycrystalline solid. The variable temperature studies of the infrared spectrum of the xenon solution indicate a relatively large enthalpy difference of 354±30 cm^–1 (4.23±0.36 kJ/mol) between the conformers. The fundamental frequencies for the asymmetric (54 cm^–1) and SiF₃ (48 cm^–1) torsions for the gauche conformer were observed in the far infrared spectrum, and from the SiF₃ torsional frequency the barrier to internal rotation is calculated to have a value of 525 cm^–1 (6.28 kJ/mol). A complete vibrational assignment is presented for the gauche conformer that is consistent with the predicted wavenumbers utilizing the force constants from ab initio MP2/6-31G* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational wavenumbers have been obtained from RHF/6-31G* and/or MP2/6-31G* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with corresponding results for some similar molecules.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

Spectra and Structures of Silicon-Containing Compounds. XXIV.* Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,Barriers to Internal Rotation,and Ab Initio Calculations of Ethylsilane

The infrared (3200 to 400 cm^–1) and Raman (3200 to 20 cm^–1) spectra of gaseous and solid ethylsilane, CH₃CH₂SiH₃, have been recorded. Additionally, the Raman spectrum of the liquid has been obtained with quantitative depolarization values. The SiH₃ torsional mode has been observed as sum and difference bands with the silicon-hydrogen stretching vibration. Utilizing the torsional fundamental frequency of 132 cm^–1 the threefold periodic barrier of 590 cm^–1 (7.06 kJ/mol) has been obtained. Utilizing the frequencies of the silicon-hydrogen stretches, Si-H bond distances of 1.485 and 1.484 Å have been obtained for the bonds gauche and trans to the methyl group, respectively. Using previously reported rotational constants from seven different isotopomers, the r ₀ parameters have been calculated and are compared to the corresponding r _s parameters. A complete vibrational assignment is proposed that is consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities as well as the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31G(d), 6-311 + G(d,p), and 6-311+G(2d,2p) basis sets at levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. The results are discussed and the theoretical values are compared to the experimental values when appropriate.     

Infrared and Raman Spectra,Conformational Stability,Ab Initio Calculations,and Vibrational Assignments for Cyclopropyldifluorosilane

The infrared (3200–30 cm^–1) spectra of gaseous and solid Cyclopropyldifluorosilane, c-C₃H₅SiF₂H, and the Raman spectra (3200–20 cm^–1) of the liquid with quantitative depolarization values and the solid have been recorded. Both the syn (cis) and skew (gauche) conformers have been identified in the fluid phases, but only the syn conformer remains in the solid. Variable temperature (–55 to –100°C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 73 ± 10 cm^–1 (209 ± 29 cal mol^–1), with the syn conformer being the more stable rotamer, which is at variance with the predictions from ab initio calculations. A complete vibrational assignment is proposed for both conformers based on infared band contours, relative intensities, depolarization values, and group frequencies. The vibrational assignments are supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G* calculations. Utilizing the frequencies of the silicon–hydrogen sketch, the rm Si—H bond distances of 1.474 and 1.472 Å have been obtained for the syn and skew conformers, respectively. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing the 6-31G* and 6-311 +G** basis sets at levels of restricted Hartree-Fock (RHF) and/or Moller–Plesset (MP) to second order. The potential energy terms for the conformer interconversion have been obtained from the MP2/6-31G* calculation. The results are discussed and compared to those obtained for some similar molecules.     

Polarized Raman spectra,thermodynamic functions and bidders to internal rotation of 2,3-dimethoxy toluene

Polarized Raman spectra of 2,3-dimethoxy toluene have been recorded in the region 50–4000 cm⁻¹ and IR spectra in the region 200–4000 cm⁻¹. All the 63 (40a′ + 23a″) normal modes of vibration have been assigned assuming a C_s point group. Consistent assignments for the internal modes of vibration of methyl (CH₃) and methoxy (OCH₃) groups have been proposed. In addition thermodynamic functions have been computed over the temperature range 100–1500 K on a MIGHTY II computer and barriers to internal rotations for the three methyl (CH₃) tops and the two methoxy (OCH₃) tops about their respective axes have been determined, using the assigned torsional frequencies and assumed structural parameter for the 2,3-dimethoxy toluene. The barrier heights have been found to be greater than 2.5 kcal mol⁻¹ for all five tops.     

Hydrogen bonding in 3-azetidinol—3. Ab initio and experimental spectra of the hydrogen-bonded species

The IR and Raman spectra in the range 4000-10 cm⁻ of 3-azetidinol and the O,N-dideuterated derivative have been recorded in the solid state and in aqueous solution. The interpretation of the vibrational spectra has been based upon ab initio calculations in the STO-3G approximation. A model structure for the calculations has been adopted in which 3-azetidinol binds two molecules of water and two molecules of ammonia. The results obtained for the aqueous solution are in accordance with the occurrence of 3-azetidinol as a hydrated, stacked, intermolecularly hydrogen-bonded chain.     

Infrared and raman spectra,vibrational assignments,normal coordinate analysis,and ab initio calculations of methyltrifluoromethyldisulfide and bis(trifluoromethyl)disulfide

The infrared and Raman (3500-35 cm^–1) spectra of gaseous and solid methyltrifluoromethyldisulfide, CF₃SSCH₃, and bis(trifluoromethyl)disulfide, CF₃SSCF₃, have been recorded. Additionally, the Raman spectra of the neat liquids have been obtained and qualitative depolarization values have been measured. These vibrational data have been interpreted, for both molecules, on the basis that the C-S-S-C dihedral angle is approximately 90°. Vibrational assignments are given for both molecules and are supported by normal coordinate calculations utilizing ab initio Hartree-Fock gradient calculations with the 3-21G^* basis set to obtain the frequencies for the normal modes and potential energy distributions. The CH₃ and CF₃ torsional modes have been observed at 140 and 48 cm^–1, respectively, for CF₃SSCH₃, from which periodic barriers of 485 cm^–1 (1.39 kcal mol^–1) and 853 cm^–1 (2.44 kcal mol^–1), respectively, have been calculated. Complete equilibrium geometries have been determined for both molecules by ab initio calculations employing both 3–21G and 6–31G basis sets. The structural parameters for bis(trifluoromethyl)disulfide are compared to those suggested from electron diffraction studies. The results are compared to corresponding quantities obtained for some similar molecules.Taken in part from the thesis of M. M. Bergana which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree.     

Spectra and structure of phosphorus—boron compounds—XXVI. Infrared and Raman spectra,conformational stability and normal coordinate analysis of ethyldichlorophosphine-borane

The Raman (3500-10 cm⁻¹) and infrared (3500-50 cm⁻¹) spectra of solid ethyldichlorophosphine-borane, CH₃CH₂P(BH₃)Cl₂ and its deuterated analog, CH₃CH₂P(BD₃)Cl₂ have been recorded. Additionally, the infrared spectra of the gases and the Raman spectra of the liquids have been recorded and qualitative depolarization ratios have been obtained. Based on the fact that several distinct Raman lines disappear on going from the liquid to the solid state, it is concluded that the molecule exists as a mixture of the gauche and trans conformers, with the trans conformer being more stable in the liquid phase, and the only one present in the solid phase. From a temperature study of the Raman spectrum of the liquid, the enthalpy difference between the gauche and trans conformers was determined to be nearly zero. Based on Raman depolarization data, group frequencies, isotopic shift factors and infrared band contours, a complete vibrational assignment has been proposed for the trans conformer. The assignment is supported by a normal coordinate calculation which was carried out utilizing a modified valence force field to obtain the frequencies of the normal modes and the potential energy distribution. The BH₃ torsion has been observed at 188 cm⁻¹, while the BD₃ torsion was not observed. The methyl torsions in the spectra of the solids have been observed at 209 and 202 cm⁻¹ for the “light” and deuterated species, respectively. From the torsional data, barriers to internal rotation have been calculated. The asymmetric torsional mode has been observed for the trans conformer in the infrared spectra of the gas phase at 108 and 104 cm⁻¹ for the BH₃ and BD₃ species, respectively. These results are compared with similar quantities for some corresponding organophosphine—borane compounds.     

Far-IR spectrum,conformation stability,barriers to internal rotation,vibrational assignment,and ab initio calculations of 3-chloro-2-methylpropene

The far-IR spectrum from 375 to 30 cm⁻¹ of gaseous 3-chloro-2-methylpropene, CH₂=C(CH₃)CH₂Cl, has been recorded at a resolution of 0.10 cm⁻¹. The fundamental asymmetric torsional mode for the gauche conformer is observed at 84.3 cm⁻¹ with three excited states falling to lower frequency. For the higher energy s-cis conformer, where the chlorine atom eclipses the double bond, the asymmetric torsion is observed at 81.3 cm⁻¹ with two excited states falling to lower frequency. Utilizing the s-cis and gauche torsional frequencies, the gauche dihedral angle and the enthalpy difference between conformers, the potential function governing the interconversion of the rotamers has been calculated. The determined potential function coefficients are (in reciprocal centimeters): V₁=189±12, V₂=−358±11, V₃=886±2 and V₄=−12±2 with an enthalpy difference between the more stable gauche and s-cis conformers of 150 ±25 cm⁻¹ (430 ± 71 cal mol⁻¹). This function gives values of 661 cm⁻¹ (1.89 kcal mol⁻¹), 1226 cm⁻¹ (3.51 kcal mol⁻¹) and 812 cm⁻¹ (2.32 kcal mol⁻¹), for the s-cis to gauche, gauche to gauche, and gauche to s-cis barriers, respectively. From the methyl torsional frequency of 170 cm⁻¹ for the gauche conformer, the threefold barrier of 678 cm⁻¹ (1.94 kcal mol⁻¹) has been calculated. The asymmetric potential function, conformational energy difference and optimized geometries of both conformers have also been obtained from ab initio calculations with both the 3–21G^* and 6–31G^* basis sets. A normal-coordinate analysis has also been performed with a force field determined from the 3–21G^* basis set. These data are compared with the corresponding data for some similar molecules.     

Spectra and Structure of Silicon-Containing Compounds. XXVIII1 Infrared and Raman Spectra,Vibrational Assignment,and Ab Initio Calculations of Vibrational Spectrum and Structural Parameters of Vinyltrichlorosilane

The infrared spectra (3200-50 cm^–1) of gaseous and solid vinyltrichlorosilane, CH₂=CH-SiCl₃, have been recorded. In addition, the Raman spectrum (3200-10 cm^–1) of the liquid has been recorded and quantitative depolarization values obtained. The infrared spectrum of the sample dissolved in liquid xenon (–80°C) has also been recorded. Using the experimental data and normal coordinate calculations with scaled ab initio force constants, the complete vibrational assignment is proposed. The torsional mode was observed in the infrared spectrum of the gas at 69 cm^–1 and the threefold barrier of internal rotation was calculated to be 500 cm^–1 (5.98 kJ/mol). Ab initio calculations have been carried out at the restricted Hartree–Fock level of the theory as well as with full electron correlation by the perturbation method to second order with different basis sets up to 6-311+G(d,p) to obtain the optimized geometries, harmonic force constants, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies. The ab initio predicted structural parameters are compared with those obtained from a previous electron diffraction study.     

Theoretical study on the structures,force field,and vibrational spectra of cyclooctatetraene and cyclooctatetraene-d8

The structures and force field of 1,3,5,7-cyclooctatetraene (COT) have been studied using ab initio theory at the SCF level with the 4-21G basis set. The quadratic force field of the D_2d structure obtained by systematic scaling of the ab initio force constants successfully reproduces the observed frequencies of COT and COT-d₈ with a mean deviation of less than 10 cm⁻¹ for non-CH stretching modes. On the basis of the calculated results, assignments of the fundamental vibrations are examined. The normal mode υ₅ is reassigned to a weak band at 758 cm⁻¹ in the Raman spectrum of COT and to a weak band at 591 cm⁻¹ in the Raman spectrum of COT-d₈. The calculations favor the assignment of υ₂₆ given by Lippincott et al. [J. Am. Chem. Soc. 73, 3370 (1951)] over the revised assignment of Perec [Spectrochim. Acta 47A, 799 (1991)]. The calculations also furnish reliable prediction for the inactive A₂ fundamentals of COT and COT-d₈. The fundamental frequencies and IR and Raman intensities of ¹³CC₇H₈, which constitutes about 9% of COT in natural abundance, are also calculated. Only ν₁₀ (calculated at 908 cm⁻¹) of the formal inactive A₂ modes has appreciable Raman intensity (0.23 Å⁴/amu). A spectral feature due to this fundametal is identified in the liquid Raman spectrum of Tabacik and Blaise [C. R. Acad. Sci. Ser. II 303, 539 (1986)] as a weak peak at 908 cm⁻¹.