Synchronized dual-polarity electrospray ionization mass spectrometry

This work describes the synchronized dual-polarity (DP) electrospray ionization (ESI) method and demonstrates the first DP ESI mass spectra obtained using two mass spectrometers. Stable double Taylor cones were produced by applying two counter electric voltages with opposite polarities to one electrosprayer. The development of double Taylor cones required higher extraction voltages than conventional ESI, but DP ESI worked effectively at liquid flow rate range three times wider than conventional ESI. Using pure methanol, the emission currents of the two cones were neutralized and no current was drawn from the sprayer. Synchronized DP mass spectra were obtained using electrospray calibrants dissolved in methanol solution of low water content. For bovine insulin with conventional electrospray solution, the gas-assisted electrospray delivered satisfactory sensitivity and stability for routine mass analyses.     

Determination of micelle mass by electrospray ionization mass spectrometry

By electrospray ionization (ESI) mass spectrometry, micelle solutions of sodium cholate were investigated in detail in the presence and absence of ethanol. The average aggregation number could be evaluated from the spectra acquired under conditions where soft collisions adequate to measure the micelle solution were induced, and the value agreed well with that obtained previously by other methods. From the dependence on ethanol content, it was also found that the average aggregation number in aqueous solution without organic solvent could be reliably estimated. The ESI method proved to be a useful tool for determining the micelle mass in the original aqueous phase.     

Infrared laser-assisted desorption electrospray ionization mass spectrometry

We have used an infrared laser for desorption of material and ionization by interaction with electrosprayed solvent. Infrared laser-assisted desorption electrospray ionization (IR LADESI) mass spectrometry was used for the direct analysis of water-containing samples under ambient conditions. An ion trap mass spectrometer was modified to include a pulsed Er:YAG laser at 2.94 microm wavelength coupled into a germanium oxide optical fiber for desorption at atmospheric pressure and a nanoelectrospray source for ionization. Analytes in aqueous solution were placed on a stainless steel target and irradiated with the pulsed IR laser. Material desorbed and ablated from the target was ionized by a continuous stream of charged droplets from the electrosprayed solvent. Peptide and protein samples analyzed using this method yield mass spectra similar to those obtained by conventional electrospray. Blood and urine were analyzed without sample pretreatment to demonstrate the capability of IR LADESI for direct analysis of biological fluids. Pharmaceutical products were also directly analyzed. Finally, the role of water as a matrix in the IR LADESI process is discussed.     

Electrochemical processes in electrospray ionization mass spectrometry

Editorial Comment Last month we presented, as a Special Feature, a set of five articles that constituted a Commentary on the fundamentals and mechanism of electrospray ionization (ESI). These articles produced some lively discussion among the authors on the role of electrochemistry in ESI. Six authors participated in a detailed exchange of views on this topic, the final results of which constitute this month's Special Feature. We particularly hope that younger scientists will find value in this month's Special Feature, not only for the science that it teaches but also what it reveals about the processes by which scientific conclusions are drawn. To a degree, the contributions part the curtains on these processes and show science in action. We sincerely thank the contributors to this discussion. The give and take of intellectual debate is not always easy, and to a remarkable extent this set of authors has maintained good humor and friendships, even when disagreeing strongly on substance. Graham Cooks and Richard Caprioli Copyright 2000 John Wiley & Sons, Ltd.     

Reactivity of ferrocenylalkylazoles under conditions of dissociative ionization

Electron ionization mass spectra of biologically active ferrocenylalkylazoles CpFeC₅H₄CH(R)Az (R = H, Me, Et, Pr, or Ph; AzH is pyrazole, imidazole, indazole, benzoimidazole, benzotriazole, adenine, or their derivatives) were studied. The nature of the heterocyclic fragment (its ionization energy) is the main factor determining the reactivity of these compounds under conditions of dissociative electron ionization. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2384–2386, October, 2005.     

Desorption electrospray ionization mass spectrometry of intact bacteria

Desorption electrospray ionization (DESI) mass spectrometry (MS) was used to differentiate seven bacteria species on the basis of their measured DESI-mass spectral profile. Both gram-positive and gram-negative bacteria were tested and included Escherichia coli, Staphyloccocus aureus, Enterococcus sp., Bordetella bronchiseptica, Bacillus thuringiensis, Bacillus subtilis and Salmonella typhimurium. Distinct DESI-mass spectra, in the mass range of 50-500 u, were obtained from whole bacteria in either positive or negative ion modes in less than 2 mins analysis time. Positive ion DESI-mass spectral fingerprints were compared using principal components analysis (PCA) to investigate reproducibility for the intraday and the day-to-day measurements and the method selectivity to differentiate the bacteria studied. Detailed study of variances in the assay revealed that a large contribution to the DESI-mass spectral fingerprint variation was the growth media preparation procedure. Specifically, experiments conducted with the growth media prepared using the same batch yielded highly reproducible DESI-mass spectra, both in intraday and in day-to-day analyses (i.e. one batch of growth media used over a 3-day period versus a new batch every day over the same 3-day period). Conclusions are drawn from our findings in terms of strategies for rapid biodetection with DESI-MS.     

Positive ion electrospray ionization mass spectrometry of oligonucleotides

Positive ion electrospray ionization mass spectra have been obtained of deoxyribonucleic acids (DNA) and ribonucleic acids (RNA), including transfer RNAs (77-mer, ～ 25 kDa). For several different solution conditions, the charge state distributions of DNA and RNA molecules were determined. It is postulated that the production of the multiply charged positive ions results from gas phase dissociation of complexes between nitrogen-containing bases and oligonucleotides.     

Some tenets pertaining to electrospray ionization mass spectrometry

The field of electrospray ionization mass spectrometry is reviewed with emphasis placed upon advances in the elucidation of fundamental mechanistic aspects of the ionization process that have been reported over the past 10 years. The analytical consequences of these findings are also examined. Eight central conclusions or 'tenets' are presented, as deduced from the body of work contained in 80 references.     

Aspartame degradation study using electrospray ionization mass spectrometry

Electrospray mass spectrometry was used to simultaneously determine aspartame (APM) and five of its degradation products; aspartic acid, aspartylphenylalanine, 5-benzyl-3,6-dioxo-2-piperazieacetic acid (diketopiperazine), phenylalanine, and phenylalanine methyl ester. Under the ionization conditions used, there was no interfering fragmentation for any of the six compounds, i.e., no fragmentation of the compound being tested into other species also being monitored. A study of APM degradation in solution at various pH's and at various temperatures using this method was performed.     

Multi-anode detection in electrospray ionization time-of-flight mass spectrometry

An electrospray ionization ion source coupled to a time-of-flight mass analyzer incorporating a multi-anode time-to-digital converter is described. High-speed data acquisition (kHz mass spectral acquisition) rates are achieved. The four-anode detector produces a significant increase in detection/counting efficiency over that for a single-anode detector. In this work a 2.5 times increase in detection efficiency is demonstrated. The multi-anode detector is also used as a diagnostic tool to optimize transmission of the ion optics.     

Differentiation of diiodothyronines using electrospray ionization tandem mass spectrometry

Diiodothyronines 3,5-diiodothyronine (3,5-T2), 3',5'-diiodothyronine (3',5'-T2), and 3,3'-diiodothyronine (3,3'-T2) are important metabolites of 3,5,3'-triiodothyronine (T3) and 3,3',5'-triiodothyronine (rT3; reverse T3). In this paper, a novel and rapid method for identifying and quantifying 3,5-T2, 3',5'-T2 and 3,3'-T2 has been introduced using electrospray ionization tandem mass spectrometry (ESI-MS/MS). Fragmentation patterns were proposed on the basis of our data obtained by ESI-MS/MS. MS2 spectra in either negative ionization mode or positive ionization mode can be used to differentiate 3,5-T2, 3',5'-T2 and 3,3'-T2. On the basis of the relative abundance of fragment ions in MS2 spectra under the positive ionization mode, quantification of the 3,5-T2, 3',5'-T2 and 3,3'-T2 isomers in mixtures is also achieved without prior separation.     

Differentiation of monoiodothyronines using electrospray ionization tandem mass spectrometry

In this work two monoiodothyronines, 3-T1 and 3'-T1, have been analyzed using electrospray ionization tandem mass spectrometry (ESI-MS/MS). Fragmentation patterns were proposed based on our data obtained by ESI-MS/MS. MS2 spectra in either negative or positive ion mode can be used to differentiate 3-T1 and 3'-T1. Based on the relative abundance of fragment ions in MS2 spectra in the negative ion mode, quantification of the 3-T1 and 3'-T1 isomers in mixtures is achieved without prior separation. Solid-phase extraction in combination with ESI-MS/MS provides a practicable procedure that can be used to determine the molar ratio of 3-T1 and 3'-T1 in human serum with an error less than 3%. The detection limits for 3-T1 and 3'-T1 were 0.5 and 0.7 pg/microL, respectively.     

Identification of bismuth-thiolate-carboxylate clusters by electrospray ionization mass spectrometry

The known thermal and hydrolytic stability of bismuth-sulfur bonds indicates that biological targets for bismuth likely involve thiol or thiolate functionalities, such as in L-cysteine. Complexes of bismuth with cysteine or other thiol-carboxylic acid ligands have been isolated and characterized providing a preliminary view of the potential participation of these functional groups in the biochemical mechanisms involving bismuth. A broader assessment of bismuth-thiolate interactions has been possible using electrospray ionization mass spectrometry (ESI-MS). A wide range of complexes has been observed containing mercaptosuccinic acid, 2-mercaptopropionic acid, 3-mercaptopropionic acid, and/or 2-amino-3-mercaptopropionic acid (cysteine). The identification of various multibismuth multiligand cluster ions defines new chemistry for bismuth.     

Fragmentation studies of sartans by electrospray ionization mass spectrometry

Sartans and related analogues with 5‐oxo‐l, 2, 4‐oxadiazole ring and tetrazole ring are investigated in detail using collision‐induced dissociation (CID) method in positive ion mode by electrospray ionization tandem mass spectrometry (ESI‐MSⁿ). It is found that the protonated sartans and related analogues tend to form the N‐substituted‐3‐substituted phenanthridin‐6‐amine ion which has a large conjugative structure. The possible fragmentation pathways were proposed for the first time, and the key structure of product ions was confirmed by high resolution tandem mass spectrometry and theoretical calculation. It is very helpful for understanding the intriguing roles of sartans analogues in fragmentation reactions and enriching the knowledge of the gas‐phase chemistry of the oxadiazole and tetrazole ring. Copyright © 2017 John Wiley & Sons, Ltd.