Welding dynamics in an atomistic model of an amorphous polymer blend with polymer–polymer interface

We consider an atomistic model of thermal welding at the polymer-polymer interface of a polyetherimide/polycarbonate blend, motivated by applications to 3D manufacturing in space. We follow diffusion of semiflexible chains at the interface and analyze strengthening of the samples as a function of the welding time t_w by simulating the strain–stress and shear viscosity curves. The time scales for initial wetting, and for fast and slow diffusion, are revealed. It is shown that each component of the polymer blend has its own characteristic time of slow diffusion at the interface. Analysis of strain–stress demonstrates saturation of the Young's modulus at t_w = 240 ns, while the tensile strength continues to increase. The shear viscosity is found to have a very weak dependence on the welding time for t_w > 60 ns. It is shown that both strain–stress and shear viscosity curves agree with experimental data.     

Influence of photodynamic effect on biological activity of PBR–PP complexes

The aim of this study was to examine the influence of photodynamic effect on biological activity of PBR–PP complexes. These measurements were performed in pH dependent environment. Constant concentration of solubilized receptor was titrated with increasing concentration of porphyrins (PPIX, Hp, PP(Arg)₂, Hp(Arg)₂, PP(Gly)₂, PP(Ala)₂, PP(Ser)₂, PP(Phe)₂) and binding constants were calculated. PBP–PP mixtures were illuminated with 3 J, 5 J or 10 J of blue light and changes in protein fluorescence was recorded. Experimental data were fitted to weak and strong binding models. As a result for all derivatives weak binding model was the best fitted. The strongest binding showed PPIX in pH 7.4 and with pH drop binding constants showed greater values for all examined derivatives. Out of amino acid derivatives the strongest binding was noticed for PP(Gly)₂ and PP(Phe)₂ and for the last one pH influence was not observed.     

MALDI-TOF imaging mass spectrometry of artifacts in “dried droplet” polymer samples

Matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) imaging of polystyrenes with various molecular masses was applied to study spatial molecular mass distribution of polymers in sample spots prepared by the “dried droplet” method. When different solvents and target surfaces were examined, a segregation of single homologous polymers was observed depending upon the evaporation rate of the solvent. For the observed patterns left by the evaporating droplet, a hypothesis is offered taking into account different hydrodynamic interactions and diffusion. The results illustrate that spot preparation using the conventionally “dried droplet” method is prone to artifacts and should be avoided for reliable and reproducible MALDI mass spectrometry experiments with regards to the determination of molecular masses and mass distributions.     

Synthesis of core–shell magnetic ion-imprinted polymer nanospheres for selective solid-phase extraction of Pb2+ from biological,food, and wastewater samples

Magnetic ion-imprinted polymer nanospheres, which have core–shell structures, have been synthesized as an adsorbent for extraction of Pb²⁺ from real samples prior to its flame atomic absorption spectrometric determination. The prepared adsorbent has been characterized using XRD, VSM, TEM, and FTIR measurements. The optimization results revealed that the adsorbent exhibited high selectivity toward Pb²⁺ over other cations such as Cu²⁺ and Zn²⁺. In addition, the removal efficiency of synthesized adsorbent was considerable (q_m?=?171.42?mg g^?1), its calibration curve was linear (0.5?850.0?ng mL^?1), and detection limit was 0.01?ng mL^?1. These results suggested that the prepared nanoadsorbent is an ideal candidate for solid-phase extraction of Pb²⁺ ions.     

HPLC–based methods for the determination of levetiracetam in biological and pharmaceutical samples

Levetiracetam is one of the new generation anti–epileptic agents (also known as anticonvulsants or antiseizure drugs). Following its approval for marketing in 2000, levetiracetam has been widely used in the treatment of epilepsy due to its broad spectrum effects. One of the advantages of this antiseizure drug is its rapid and complete absorption after oral administration. It has also minimal drug–drug and food interactions, and shows more than 95% bioavailability. The determination of levetiracetam in various samples is carried out using several analytical methods including HPLC–based methods. HPLC–based methods are used for different pharmaceutical analyses and play an important role in drug monitoring during patient follow–ups. This review provides a summary of the HPLC–based methods used in the determination and quantification of levetiracetam in biological fluids and pharmaceutical preparations.     

Study of phase behaviour for the aqueous two-phase polymer–polymer systems using the modified UNIQUAC-NRF model

A modified form of the UNIQUAC-NRF activity coefficient model was used to study the phase behaviour of the aqueous two-phase systems (ATPSs) of polyethylene glycol (PEG) and dextran (DEX) with different molecular weights at various temperatures. In the proposed model, a ternary interaction parameter was added to the expression for the excess Gibbs free energy and, in turn, to the corresponding activity coefficient rendered by the UNIQUAC-NRF model. The combinatorial part of the new model takes the same form as that of the original UNIQUAC model and the residual part considers the nonrandomness and also the binary and the ternary interactions among the molecules in mixtures of PEG, DEX, and water. The results show that the new model can more accurately correlate the experimental data for the systems studied in this work than those obtained from the original UNIQUAC and the UNIQUAC-NRF activity coefficient models. In order to favourably compare the results the same minimisation procedure and the same experimental data were used for the models studied in this work. The results for the Root Mean Square Deviations (RMSD) produced by the three UNIQUAC-based models are also reported.     

Development of an information-intensive structure–activity relationship model and its application to human respiratory chemical sensitizers

Structure–activity relationship (SAR) models are recognized as powerful tools to predict the toxicologic potential of new or untested chemicals and also provide insight into possible mechanisms of toxicity. Models have been based on physicochemical attributes and structural features of chemicals. We describe herein the development of a new SAR modeling algorithm called cat-SAR that is capable of analyzing and predicting chemical activity from divergent biological response data. The cat-SAR program develops chemical fragment-based SAR models from categorical biological response data (e.g. toxicologically active and inactive compounds). The database selected for model development was a published set of chemicals documented to cause respiratory hypersensitivity in humans. Two models were generated that differed only in that one model included explicate hydrogen containing fragments. The predictive abilities of the models were tested using leave-one-out cross-validation tests. One model had a sensitivity of 0.94 and specificity of 0.87 yielding an overall correct prediction of 91%. The second model had a sensitivity of 0.89, specificity of 0.95 and overall correct prediction of 92%. The demonstrated predictive capabilities of the cat-SAR approach, together with its modeling flexibility and design transparency, suggest the potential for its widespread applicability to toxicity prediction and for deriving mechanistic insight into toxicologic effects.     

Erratum to: “In vitro biological activity comparison of some hydroxyapatite-based composite materials using simulated body fluid”

The original version of the article was published in Cent. Eur. J. Chem. 11(10) (2013) pp. 1583–1598. Unfortunately, the original version of this article contains a mistake in the affiliation section. The affiliation for R?zvan Stefan is Veterinary Medicine Faculty, University of Agricultural Science and Veterinary Medicine, RO-400372 Cluj Napoca, Romania.     

Neutron beam preparation with Am–Be source for analysis of biological samples with PGNAA method

Material analysis with prompt gamma neutron activation analysis (PGNAA) requires a proper geometrical arrangement for equipments in laboratory. Application of PGNAA in analysis of biological samples, due to small size of sample, needs attention to the dimension of neutron beam. In our work, neutron source has been made of ²⁴¹Am–Be type. Activity of ²⁴¹Am was 20 Ci which lead to neutron source strength of 4.4 × 10⁷ neutrons per second. Water has been considered as the basic shielding material for the neutron source. The effect of various concentration of boric acid in the reduction of intensity of fast and thermal components of the neutron beam and gamma ray has been investigated. Gamma ray is produced by (α, n) reaction in Am–Be source (4.483 MeV), neutron capture by hydrogen (2.224 MeV), and neutron capture by boron (0.483 MeV). Various types of neutron and gamma ray dosimeters have been employed including BF₃ and NE-213 detectors to detect fast and thermal neutrons. BGO scintillation detector has been used for gamma ray spectroscopy. It is shown that the gamma and neutron radiation dose due to direct beam is of the same magnitude as the dose due to radiation scattered in the laboratory ambient. It is concluded that 14 kg boric acid dissolved in 1,000 kg water is the optimum solution to surround the neutron source. The experimental results have been compared with Monte Carlo simulation.     

Total synthesis of (−)-vitrenal and its biological activity

(−)-Vitrenal, the enantiomer of a natural sesquiterpene aldehyde isolated from a liverwort, has been synthesized starting from (+)-Δ³-carene, and its activity as a plant-growth regulator has been tested.     

Investigations on laser ablation–microwave induced plasma–atomic emission spectrometry using polymer samples

The potential of laser ablation–microwave induced plasma–atomic emission spectrometry (LA–MIP–AES) for the analysis of plastic materials has been investigated. A Nd/YAG laser, operated in its fundamental mode at 1064 nm, was used to ablate small amounts of various plastics. The sample atoms were transported and excited in a closely neighbored continuously running microwave induced plasma (MIP) operated in argon or helium at reduced pressure. A 0.5-m échelle spectrometer, equipped with an intensified charge coupled device (ICCD) as a detector was used for recording the spectra. The amount of ablated material was found to be strongly dependent on the matrix (10–190 ng/shot). Signals for some metals often used as additives in polymers (Al, Ca, Cu, Sb, Ti) and for the elements F, Cl, Br, J, and P in various polymers were recorded in the spectral range 250–840 nm. The estimated detection limits were found to be in the range 0.001–0.08% for metals and 0.05–0.7% for non-metals. Spectral lines of fluorine and iodine could only be measured in the helium MIP. For high concentrations of chlorine and carbon in the samples (polyvinylchloride), a memory effect was observed.     

Synthesis and biological activity of isoalantolactone—tryptamine conjugates

Previously unknown adducts of substituted tryptamines with sesquiterpene lactones, viz., isoalantolactone and its epoxy derivative, were synthesized by the Michael reaction. The compounds obtained were tested for various types of biological activity.     

Use of the Bell–Evans–Polanyi Principle to predict regioselectivity of nucleophilic aromatic photosubstitution reactions

Regioselectivity of nucleophilic aromatic photosubstitution has been shown experimentally to depend upon activation energies of the competing transition states. Computational means of determining relative activation energies were sought, therefore, in order to predict regioselectivity. Optimization of the three triplet transition states of 2-chloro-4-nitroanisole with hydroxide ion gave energies of insufficient accuracy to predict regioselectivity. Computed enthalpy changes from the first triplet transition state to the triplet σ-complexes correlated precisely with the experimental activation energies. This exemplifies the Bell–Evans–Polanyi Principle, and it provides an accurate means of assessing regioselectivity.     

In vitro biological activity of aromadendrin-4′-methyl ether isolated from root extract of Ventilago madraspatana Gaertn with relevance to anticandidal activity

In this study, antimicrobial and antioxidant activities of the hexane extract of the root of Ventilago madraspatana were evaluated. Based on the significant bioactivity of crude hexane extract, an active compound was purified from the root extract. The active compound was further purified and identified as aromodendrin-4′-methyl ether by the ¹H NMR spectrum. The isolated compound significantly inhibited Staphylococcus epidermidis with the lowest MIC and MBC at 78 μg/mL (P < 0.05). The compound also exhibited significant anticandidal activity with MIC and MBC values of 312 and 625 μg/mL, respectively. The radical scavenging activity of aromodendrin-4′-methyl ether was evident by its lower IC₅₀ values of 60 μg/mL for DPPH scavenging and 3.2 μg/mL for ABTS scavenging. The compound also exhibited ferrous ion chelation and H₂O₂ scavenging activities. The study is an attempt to increase the industrial utility of V. madrasapatana.     

Determination of γ-hexachlorocyclohexane and its metabolites in biological samples from rat

We have determined γ-hexachlorocyclohexane (lindane) and its metabolites in urine, serum and feces samples from rats using HPLC-UV-Vis and confirmation of mass with matrix assisted laser desorption/ ionization-time of flight (MALDI-TOF) analysis. Samples were collected from rats treated orally with lindane (17.6 mg/kg; 1/5 of LD₅₀) or vehicle for 2 weeks. Lindane and metabolites were extracted from samples with hexane and analyzed. The HPLC–MALDI-TOF is highly sensitive to the point of detecting very low level (5 ppm) of lindane and metabolites. The HPLC-UV-Vis analysis confirmed the presence of lindane in urine (386–1652 ppm), serum (207–371 ppm) and feces (5–74 ppm). Control samples had no peak corresponding to lindane. MALDI-TOF analysis of urine and serum samples showed a major peak at 293 m/z, whereas feces showed a minor peak at 292–293 m/z, which were consistent with the peak obtained for standard lindane (293 m/z). Our data indicates that HPLC-UV-Vis–MALDI-TOF combo method is sensitive for detecting and quantifying lindane and its metabolites in serum, urine and feces. Our results further showed that minor quantities of lindane and metabolites were excreted through feces confirming that the main pathway for excretion of lindane and metabolites is through urine.     

Synthesis, structure and biological activity of 3,7-dinitrodibenzobromonium salt

3,7-Dinitrodibenzobromonium bisulfate 3 was prepared directly by the reaction of4,4' -dinitrobiphenyl with sodium bromide and potassium persulfate in the concentrated sulphuric acid. Metathetical reactions of 3 gave 3, T-dinitrodibenzobromonium chloride 4, bromide 5 and iodide 6, respectively. Crystal structure of 3a obtained by crystallization of 3 in formic acid showed that each molecule of 3a consists of two dibenzobromonium ions, two bisulfate anions and a formic acid. The dibenzobromonium ion is nearly coplanar. Compound 3 can dramatically increase mice's immunofunction.