DFT/TD-DFT molecular design of porphyrin analogues for use in dye-sensitized solar cells

Density functional theory (DFT) and time-dependent DFT calculations have been employed to model Zn meso-tetraphenylporphyrin (ZnTPP) complexes having different beta-substituents, in order to design an efficient sensitizer for dye-sensitized solar cells. To calculate the excited states of the porphyrin analogues, at least the TD-B3LYP/6-31G* level of theory is needed to replicate the experimental absorption spectra. Solvation results were found to be invariant with respect to the type of model used (PCM vs. C-PCM). Most of the electronic transitions based on Gouterman's four-orbital model of ZnTPP-A and ZnTPP-B are pi --> pi* transitions, so that cell efficiency can be enhanced by increasing the pi-conjugation and electron-withdrawing capability of the beta-substituent. This proposition was tested by inserting thiophene into the beta-substituent of ZnTPP-A to form a new analogue, ZnTPP-C. Compared with ZnTPP-A and ZnTPP-B, ZnTPP-C has a smaller band gap, which brings LUMO closer to the conduction band of TiO(2), and a red-shifted absorption spectrum with higher extinction coefficients, especially in the Q-band position.     

Fe(II) hydrolysis in aqueous solution: A DFT study

Species arising from Fe(II) hydrolysis in aqueous solution have been investigated using density-functional methods (DFT). The different tautomers and multiplicities of each species have been calculated. The solvation energy has been estimated using the UAHF–PCM method. The hydrolysis free energies have been estimated and compared with the available experimental data. The different hydrolysis species have distinct geometries and electronic structures. The estimated ionization potential of the hydrolyzed species is linearly dependent to the number of hydroxyls present in the complex. The estimated Fe(II)/Fe(III) oxidation potential is in good agreement with previously published results about 0.29 V larger than the experimental value. The results highlight the importance of the chemical speciation in describing electron transfer processes at a molecular level. The PBE/TZVP/UAHF–PCM method has been found to describe correctly the hydrolysis free energies of Fe(II) with an average error about 5 kcal mol⁻¹ from the experimental values.     

Dye molecular structure device open-circuit voltage correlation in Ru(II) sensitizers with heteroleptic tridentate chelates for dye-sensitized solar cells

Dicarboxyterpyridine chelates with π-conjugated pendant groups attached at the 5- or 6-position of the terminal pyridyl unit were synthesized. Together with 2,6-bis(5-pyrazolyl)pyridine, these were used successfully to prepare a series of novel heteroleptic, bis-tridentate Ru(II) sensitizers, denoted as TF-11-14. These dyes show excellent performance in dye-sensitized solar cells (DSCs) under AM1.5G simulated sunlight at a light intensity of 100 mW cm(-2) in comparison with a reference device containing [Ru(Htctpy)(NCS)(3)][TBA](3) (N749), where H(3)tctpy and TBA are 4,4',4"-tricarboxy-2,2':6',2"-terpyridine and tetra-n-butylammonium cation, respectively. In particular, the sensitizer TF-12 gave a short-circuit photocurrent of 19.0 mA cm(-2), an open-circuit voltage (V(OC)) of 0.71 V, and a fill factor of 0.68, affording an overall conversion efficiency of 9.21%. The increased conjugation conferred to the TF dyes by the addition of the π-conjugated pendant groups increases both their light-harvesting and photovoltaic energy conversion capability in comparison with N749. Detailed recombination processes in these devices were probed by various spectroscopic and dynamics measurements, and a clear correlation between the device V(OC) and the cell electron lifetime was established. In agreement with several other recent studies, the results demonstrate that high efficiencies can also be achieved with Ru(II) sensitizers that do not contain thiocyanate ancillaries. This bis-tridentate, dual-carboxy anchor configuration thus serves as a prototype for future omnibearing design of highly efficient Ru(II) sensitizers suited for use in DSCs.     

Comparative study on the photophysical properties between carbene-based Fe (II) and Ru (II) complexes

The comparative study on the photophysical properties between cheap metal Fe (II) complexes and noble metal Ru (II) complexes with identical ligand coordination is performed by the combination of density functional theory (DFT) and time-dependent density functional theory (TDDFT) to evaluate the potential alternative applications of Fe (II) complexes. RuBIP (BIP = 2,6-bis (imidazol-2- ylidene)pyridine) is theoretically established that the radiative lifetime of the second lowest triplet state is more consistence with experimental value. However, FeBIP retains nonluminous because of low-lying ³MC originated from weak d orbital splitting. FeBIPC (FeBIP with carboxylic acid groups) has twice longer lifetime than its parent complex FeBIP due to the great decrease of the energy gap between ³MLCT and ³MC. What's more, the lifetimes of Fe (II) complexes detected in the experiments are more accessible to nonradiative decay lifetimes of ³MC. The carboxylic acid groups are beneficial for the improvement of luminescent possibility and controllability of Fe (II) complexes, while there is still a huge challenge for effective material replacement comparing with Ru (II) complexes.     

A new study on solid-state cyanine dye-sensitized solar cells

A new cyanine dye, 7-{1-[2-(4-morpholine-1,8-naphthalimide)ethyl]-1H-1,2,3-triazol-4-}-2-[3-(5-carboxyl-1,3-dihydro-3,3-dimethyl-1-butyl-indolin-2-methylene)-propenyl]-1,1-dimethyl-3-buty-1H-benzo[e]indolium iodide (BIDC), has been synthesized and identified with regard to its structure and photoelectrochemical properties used as a sensitizer on dye-sensitized solar cells. A novel solid-state electrolyte with polyaniline-loaded carbon black (PACB)-1-methyl-3-propylimidazolium iodide (MPII) composite was investigated on these dye-sensitized solar cells (DSCs). The short-circuit photocurrent density (J _sc), open-circuit photovoltage (V _oc) and fill factor (ff) under 200 W/m² white light from a xenon lamp are 0.44 mA/cm², 550 mV and 0.58, respectively, yielding an overall conversion efficiency (η) of 0.7%. The most merit of the solid-sate electrolyte was free of volatile and flammable fluid components and easy of encapsulation for DSCs.     

Highly efficient catalysts for Co(II/III) redox couples in dye-sensitized solar cells

We developed several low-cost catalysts with high catalytic activity, which were used as counter electrodes in dye-sensitized solar cells (DSCs). They showed higher efficiencies than that of Pt. The efficiencies were improved by 18-42% for the DSCs composed of active carbon, niobium dioxide, ordered mesoporous carbon and commercial titanium carbide.     

DFT quantum-chemical study of the hydrolysis products of Fe(II) and Fe(III) aqua-complexes

The quantum-chemical DFT calculations of thermodynamic characteristics of the reactions of formation of binuclear dihydroxobridging [Fe(H₂O)₄(μ-OH)₂Fe(H₂O)₄] ⁿ⁺ and oxobridging [Fe(H₂O)₅(μ-O)Fe·(H₂O)₅] ⁿ⁺ (n = 2, 4) cations, the hydrolysis products of cations [Fe(H₂O)₆] ^m+ (m = 2, 3). It is shown that effects of solvation lead to higher energetic stability of the dihydroxobridging binuclear compounds in aqueous solutions.     

Substituted polypyridine complexes of cobalt(II/III) as efficient electron-transfer mediators in dye-sensitized solar cells

A number of cobalt complexes of substituted polypyridine ligands were synthesized and investigated as possible alternatives to the volatile and corrosive iodide/triiodide redox couple commonly used as an electron-transfer mediator in dye-sensitized solar cells (DSSCs). The extinction coefficients in the visible spectrum are on the order of 10(2) M(-1) cm(-1) for the majority of these complexes, diminishing competition with the light-harvesting dye. Cyclic voltammetric studies revealed a dramatic surface dependence of the heterogeneous electron-transfer rate, which is surprisingly different for gold, carbon, and platinum electrodes. DSSCs were assembled using a mediator that consisted of a mixture of Co(II) and Co(III) complexes in a 10:1 ratio. DSSCs containing these mediators were used to characterize incident photon-to-current conversion efficiency and photoelectrochemical responses. The best performing of these mediators were identified and subjected to further study. As suggested by electrochemical results, gold and carbon are superior cathode materials to platinum, and no evidence of corrosion on any cathode material was observed. Addition of lithium salts to the mediator solution resulted in a dramatic improvement in cell performance. The observed Li(+) effect is explained in terms of the recombination of injected electrons in the photoanode with the oxidized mediator. The best mediator, based on tris(4,4'-di-tert-butyl-2,2'-dipyridyl)cobalt(II/III) perchlorate, resulted in DSSCs exhibiting efficiencies within 80% of that of a comparable iodide/triiodide-mediated DSSC. Due to the commercial availability of the ligand and the simplicity with which the complex can be made, this new mediator represents a nonvolatile, noncorrosive, and practical alternative as an efficient electron-transfer mediator in DSSCs.     

A panchromatic boradiazaindacene (BODIPY) sensitizer for dye-sensitized solar cells

A novel distyryl-substituted boradiazaindacene (BODIPY) dye displays interesting properties as a sensitizer in DSSC systems, opening the way to further exploration of structure-efficiency correlation within this class of dyes.     

DFT and TD-DFT calculations on thieno[2,3-b]indole-based compounds for application in organic bulk heterojunction (BHJ) solar cells

Research on Chemical Intermediates - Eight novel organic compounds with donor–π–acceptor (D–π–A) structure were designed for use as donors in organic bulk...     

Electronic optimization of heteroleptic Ru(II) bipyridine complexes by remote substituents: synthesis, characterization, and application to dye-sensitized solar cells

We prepared a series of new heteroleptic ruthenium(II) complexes, Ru(NCS)(2)LL' (3a-3e), where L is 4,4'-di(hydroxycarbonyl)-2,2'-bipyridine and L' is 4,4'-di(p-X-phenyl)-2,2'-pyridine (X = CN (a), F (b), H (c), OMe (d), and NMe(2) (e)), in an attempt to explore the structure-activity relationships in their photophysical and electrochemical behavior and in their performance in dye-sensitized solar cells (DSSCs). When substituent X is changed from electron-donating NMe(2) to electron-withdrawing CN, the absorption and emission maxima reveal systematic bathochromic shifts. The redox potentials of these dyes are also significantly influenced by X. The electronic properties of the dyes were theoretically analyzed using density functional theory calculations; the results show good correlations with the experimental results. The solar-cell performance of DSSCs based on dye-grafted nanocrystalline TiO(2) using 3a-3e and standard N3 (bis[(4,4'-carboxy-2,2'-bipyridine)(thiocyanato)]ruthenium(II)) were compared, revealing substantial dependences on the dye structures, particularly on the remote substituent X. The 3d-based device showed the best performance: η = 8.30%, J(SC) = 16.0 mA·cm(-2), V(OC) = 717 mV, and ff = 0.72. These values are better than N3-based device.     

DFT and TD-DFT calculations on the electronic structures and spectroscopic properties of cyclometalated platinum(II) complexes

The electronic structures and spectroscopic properties of the three tridentate cyclometalated Pt(II) complexes Pt(N/\N/\C)C(triple bond)CPh (N/\N/\CH = 6-phenyl-2,2'-bipyridine) (1), Pt(N/\N/\S)C(triple bond)CPh (N/\N/\SH = 6-thienyl-2,2'-bipyridine) (2), and Pt(N/\N/\O)C(triple bond)CPh (N/\N/\OH = 6-furyl-2,2'-bipyridine) (3) were investigated theoretically using the density functional theory (DFT) method. The geometric structures of the complexes in the ground and excited states were explored at the B3LYP and UB3LYP levels, respectively. The absorption and emission spectra of the complexes in CH2Cl2 and CH3CN solutions were calculated by time-dependent density functional theory (TD-DFT) with the PCM solvent model. The calculated energies of the lowest singlet state and lowest triplet state in the three complexes are in good agreement with the results of experimental absorption and luminescence studies. All of the lowest-lying transitions were categorized as LLCT combined with MLCT transitions. The 623-nm emission of 1 from the 3A' --> 1A' transition was assigned as 3LLCT and 3MLCT transitions, whereas the 657- and 681-nm emissions of 2 and 3, respectively, were attributed to 3ILCT perturbed by 3MLCT transitions. NLO response calculations revealed that the nonzero values of the static first hyperpolarizability (beta0) for 1-3 are greatly enhanced through the introduction of the metal Pt(II) into the cyclometalated ligands, an effect that is determined by MLCT and LLCT transitions.     

A theory study based on DFT/TD-DFT for a series of Ir(III) complexes with the low-efficiency roll-off and the high-inter-system crossover rate properties

This study employs density functional theory (DFT) and time-dependent density functional theory (TD-DFT) to investigate a series of cyclometallated Ir(III) complexes for their application as OLED light-emitting materials, including (dtp)₂Ir(dpm), (mmpyp)₂Ir(dpm), (dtp)₂Ir(tpip), (mmpyp)₂Ir(tpip), (dtp)₂Ir(pic), and (mmpyp)₂Ir(pic). Their geometries, frontier molecular orbital properties, ionization potential, electron affinity, absorption and emission spectra, and spin-orbit coupling properties have been analyzed respectively. Through comparison, we have identified complexes with reduced efficiency roll-off and enhanced k_ISC.     

Synthesis of monomeric Fe(II) and Ru(II) complexes of tetradentate phosphines

rac-Bis[{(diphenylphosphino)ethyl}-phenylphosphino]methane (DPPEPM) reacts with iron(II) and ruthenium(II) halides to generate complexes with folded DPPEPM coordination. The paramagnetic, five-coordinate Fe(DPPEPM)Cl(2) (1) in CD(2)Cl(2) features a tridentate binding mode as established by (31)P{(1)H} NMR spectroscopy. Crystal structure analysis of the analogous bromo complex, Fe(DPPEPM)Br(2) (2) revealed a pseudo-octahedral, cis-α geometry at iron with DPPEPM coordinated in a tetradentate fashion. However, in CD(2)Cl(2) solution, the coordination of DPPEPM in 2 is similar to that of 1 in that one of the external phosphorus atoms is dissociated resulting in a mixture of three tridentate complexes. The chloro ruthenium complex cis-Ru(κ(4)-DPPEPM)Cl(2) (3) is obtained from rac-DPPEPM and either [RuCl(2)(COD)](2) [COD = 1,5-cyclooctadiene] or RuCl(2)(PPh(3))(4). The structure of 3 in both the solid state and in CD(2)Cl(2) solution features a folded κ(4)-DPPEPM. This binding mode was also observed in cis-[Fe(κ(4)-DPPEPM)(CH(3)CN)(2)](CF(3)SO(3))(2) (4). Addition of an excess of CO to a methanolic solution of 1 results in the replacement of one of the chloride ions by CO to yield cis-[Fe(κ(4)-DPPEPM)Cl(CO)](Cl) (5). The same reaction in CH(2)Cl(2) produces a mixture of 5 and [Fe(κ(3)-DPPEPM)Cl(2)(CO)] (6) in which one of the internal phosphines has been substituted by CO. Complexes 2, 3, 4, and 5 appear to be the first structurally characterized monometallic complexes of κ(4)-DPPEPM.     

The excited states of bipyridyl and phenanthroline complexes of Fe(III), Ru(II) and Ru(III): A molecular orbital study

The semiempirical zero-differential-overlap molecular orbital model which was shown in earlier papers in this series to give a good account of the charge transfer and -* spectra of Fe(II) complexes with conjugated ligands such as 2,2-bipyridyl and 1,10-phenanthroline is extended to complexes having openshell ground states, such as those of Fe(III), and to complexes of Ru(II) and Ru(III). The results are used to assign the observed charge transfer and intra-ligand absorption bands to specific orbital transitions. Observed and calculated intensities are in good agreement: reasons are advanced for the much lower intensity of the charge transfer bands in Ru(III) compared to Ru(II) complexes.