Inhibitive action of ethanol extracts from Nauclea latifolia on the corrosion of mild steel in H2SO4 solutions and their adsorption characteristics

The inhibitive action of ethanol extracts from leaves (LV), bark (BK) and roots (RT) of Nauclea latifolia on mild steel corrosion in H₂SO₄ solutions at 30–60 °C was studied using weight loss and gasometric techniques. The extracts were found to inhibit the corrosion of mild steel in H₂SO₄ solutions and the inhibition efficiencies of the extracts follow the trend: RT > LV > BK. The inhibition efficiency increased with the extracts concentration but decreased with temperature rise. Physical adsorption of the phytochemical components of the plant on the metal surface is proposed as the mechanism of inhibition. The adsorption characteristics of the inhibitor were approximated by the thermodynamic-kinetic model of El-Awady et al.     

Synthesis,characterization, powder XRD and antimicrobial-antioxidant activity evaluation of trivalent transition metal macrocyclic complexes

The in vitro antimicrobial and antioxidant activities of metal complexes derived from 1,8-diaminonaphthalene and 5,5-dimethylcyclohexane-1,3-dione were evaluated. The complexes were synthesized by template method in the presence of trivalent metal salts, resulting in the formation of tetraaza macrocyclic complexes of the type [M (C₃₆H₃₆N₄) X] X₂, where M = Cr(III), Fe(III) and X = Cl^–, NO₃^–, CH₃COO^–. The synthesized complexes were characterized with the aid of elemental analyses, molar conductance measurements, magnetic susceptibility measurements, electronic, IR, mass and powder XRD studies. Based on various studies, a five-coordinated square pyramidal geometry was proposed for these complexes. The X-ray diffraction studies suggest a monoclinic crystal system for the complexes.     

Spirulina platensis – A novel green inhibitor for acid corrosion of mild steel

The inhibition of the corrosion of mild steel in 1 M HCl and 1 M H₂SO₄ by Spirulina platensis has been studied at different temperatures viz., 303 K, 313 K and 323 K by weight loss method, potentiodynamic polarization method, electrochemical impedance spectroscopy measurements and SEM analysis. The inhibition efficiency increased with increasing concentration of the inhibitor in both HCl and H₂SO₄ media. The results of weight loss studies correlated well with those of impedance and polarization studies. From the results of weight loss studies at various temperatures, the mode of adsorption is confirmed to be physisorption. Further the adsorption has been found to follow Temkin isotherm. From this isotherm, the free energy of adsorption (ΔG) and entropy (ΔS) are calculated. The study reveals the corrosion inhibition potential of S. platensis in both the acid media, thus bringing to light another facet of this microalga as it has so far been used only to produce antioxidant principles, finding extensive use in medicine especially as neutraceutical.     

Employing electrochemical frequency modulation for studying corrosion and corrosion inhibition of copper in sodium chloride solutions

The inhibition effect of 2-carboxymethylthio-4-(p-methoxyphenyl)-6-oxo-1,6-dihy-dropyrimidine-5-carbonitrile (CPD) towards the corrosion of copper was studied in aerated stagnant 3.5% NaCl at 25 °C using ac techniques include electrochemical frequency modulation and electrochemical impedance spectroscopy as well as potentiodynamic polarization measurements. Corrosion rates determined using electrochemical frequency modulation (EFM) which measures the non-linear behaviour of a corroding system are compared with corrosion rates obtained from traditional electrochemical techniques and show good agreement. Data obtained from EIS were analyzed to model the corrosion inhibition process through equivalent circuit. Polarization measurements showed that CPD acts as mixed-type inhibitor. The inhibition efficiency increases with an increase in the concentration of CPD. The adsorption of the inhibitor on the copper surface in the sodium chloride solution was found to obey Langmuir’s adsorption isotherm. A mixed inhibition mechanism is proposed for the inhibitive effects of CPD as revealed by potentiodynamic polarization technique.     

Adsorption behavior and corrosion inhibitive potential of xanthene on mild steel/sulphuric acid interface

The inhibition of xanthene (XEN) on the corrosion of mild steel in 0.5 M H₂SO₄ was studied by gravimetric and UV–visible spectrophotometric methods at 303–333 K. Results obtained show that XEN act as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in XEN concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using Statistical Physics were calculated and discussed. The corrosion process in 0.5 M H₂SO₄ in the absence and presence of XEN follows zero-order kinetics. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Quantum chemical calculations using DFT were used to calculate some electronic properties of the molecule in order to ascertain any correlation between the inhibitive effect and molecular structure of xanthene.     

Inhibition effect of hexadecyl pyridinium bromide on the corrosion behavior of some austenitic stainless steels in H2SO4 solutions

The inhibition effect of hexadecyl pyridinium bromide (HDPB) as a cationic surfactant on the corrosion behavior of some Egyptian austenitic stainless steel SS 304L, SS 316H and SS 304H in 0.5 M H₂SO₄ solutions was investigated by using potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results indicate that HDPB is a good inhibitor for the samples under investigation in 0.5 M H₂SO₄ solutions. In addition, the inhibition efficiency η% increases with the inhibitor concentration while decreases with the increasing temperature referring to physical adsorption. The adsorption of the inhibitor obeys a Temkin adsorption isotherm. Polarization curves show that HDPB is a mixed inhibitor in H₂SO₄ solutions. The results obtained from polarization and impedance measurements are in good agreement. Activation-free energies, enthalpies, and entropies for the inhibition process of HDPB were determined.     

Synthesis,characterization and corrosion inhibition efficiency of 2-(6-methylpyridin-2-yl)-1H-imidazo[4,5-f][1,10] phenanthroline on mild steel in sulphuric acid

Phenanthroline derivative, 2-(6-methylpyridin-2-yl)-1H-imidazo[4,5-f][1,10] phenanthroline (MIP) was synthesized and characterized by elemental analysis, FT-IR, ¹H NMR, ¹³C NMR, and single crystal X-ray diffraction study. MIP was evaluated as corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solution using gravimetric and UV–Visible spectrophotometric methods at 303–333 K. Results obtained show that MIP acts as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in MIP concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using statistical physics were calculated and discussed. The UV–Visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a MIP-Fe complex.     

Xanthione: A new and effective corrosion inhibitor for mild steel in sulphuric acid solution

The adsorption and inhibition effect of xanthione (XION) on mild steel in 0.5 M H₂SO₄ at 303–333 K were studied using gravimetric and UV–visible spectrophotometric methods. The results obtained show that XION acts as an effective corrosion inhibitor for mild steel in sulphuric acid and inhibition efficiency reaches 98.0% at a very low inhibitor concentration of 10 μM. Inhibition efficiency was found to increase with increase in XION concentration but decreased with temperature suggesting physical adsorption mechanism. Arrhenius law and its transition equation lead to estimate the activation parameters of the corrosion process. XION inhibits the corrosion of mild steel effectively at moderate temperature and adsorbs according to the Langmuir isotherm. Thermodynamic parameters governing the adsorption process have been calculated and discussed. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Attempt to correlate the molecular structure to quantum chemical indices was made using density functional theory (DFT).     

Inhibition of cold rolled steel corrosion in sulphuric acid solution by 2-mercapto-1-methylimidazole: Time and temperature effects treatments

2-Mercapto-1-methylimidazole (MMI) has been evaluated as a corrosion inhibitor for cold rolled steel in aerated 2 M H₂SO₄ by gravimetric method. The effect of MMI on the corrosion rate was determined at various immersions time and concentrations. The effect of the temperature on the corrosion behaviour with addition of different concentrations of MMI was studied in the temperature range 30–60 °C. The MMI acts as an effective corrosion inhibitor for cold rolled in sulphuric acid medium. The inhibition process is attributed to the formation of an adsorbed film of MMI on the metal surface which protects the metal against corrosion. The protection efficiency increased with increase in inhibitor concentration at various immersions time and decreased with increase in temperature. Adsorption of MMI on the cold rolled steel surface is found to obey the Langmuir adsorption isotherm. Some thermodynamic functions of dissolution and adsorption processes were also determined.     

The irreversible characteristic analysis of thiourea on copper electrodes in aqueous 0.5 mol/L sulphuric acid

The reaction behaviors of various concentrations thiourea (TU) on copper electrode in 0.5 mol/L H₂SO₄ solution were investigated by electrochemical impedance spectroscopy (EIS) and single crystallogram. The loop at low frequency shifts negatively with the concentration of TU increasing to 0.25 mol/L in the research. It reveals the adsorption of TU converts the acidic corrosion of copper electrode to the final irreversible complexation of copper and TU. Furthermore, the dependence of irreversiblility on Cu(I)–TU complex surface coverage (θ) was discussed by an EIS mathematical model. The three-dimensional supermolecular network structure of [Cu₂(NH₂CSNH₂)₆]SO₄ · H₂O enhances the stability of the complex, and leads to the final irreversibility of whole reaction.     

The study of self-assembled films of triazole on iron electrodes using electrochemical methods,XPS, SEM and molecular simulation

3-Alkyl-4-amino-5-mercapto-1,2,4-triazole (AAMT) has been evaluated as corrosion inhibition for iron in 0.1 M H₂SO₄ when the films of AAMT were self-assembled on the surface of iron. The films of AAMT inhibitor were characterized by electrochemical impedance spectroscopy, electrochemical polarization curves Results revealed that AAMT performed excellently as a corrosion inhibitor for iron in H₂SO₄ solution. Surface analysis was carried out using X-ray photoelectron spectroscopy and scanning electron microscope. The mechanism of adsorption was discussed using molecular simulation.     

Potentiometric and conductometric studies of malonyl bis(salicyloylhydrazone) and divalent metal complexes

A series of complexes of divalent transition metal ions with malonyl bis(salicyloylhydrazone) (H₄MSH) have been prepared and characterized with the help of conductometric, potentiometric methods. The proton–ligand and metal–ligand stability constants were obtained pH-metrically. The electrical conductivity of solid complexes was measured at 289 K. The low molar conductance values observed for these complexes indicate that, they are non-electrolytes. They are soluble to a limited extent in DMF and DMSO. The elemental analyses of the complexes indicate that the complexes have 1:1 and 2:1 (M:L) stoichiometry with the existence of water, chloride, acetone molecules inside the coordination sphere as evidence from the IR spectral studies. Further, the complexes have been formulated by comparing C, H, N & metal analysis data, and UV–visible spectra of the complexes have been discussed. The protonation constants of the ligand and the stability constants of their metal complexes will be evaluated potentiometrically. The stoichiometric ratios of the complexes formed in solution will be evaluated applying the molar ratio (spectrophotometric) method and confirmed conductometrically.     

(Liquid + liquid) equilibria of ternary and quaternary systems containing n-hexane,toluene, m-xylene,propanol, sulfolane,and water at T = 303.15 K

(Liquid + liquid) equilibrium data for ternary and quaternary systems containing n-hexane (C₆H₁₄), toluene (C₇H₈), m-xylene (C₈H₁₀), propanol (C₃H₈O), sulfolane (C₄H₈SO₂), and water (H₂O) were measured at T = 303.15 K. Phase diagrams of {w₁C₄H₈SO₂ + w₂C₇H₈ + (1 − w₁ − w₂)C₆H₁₄}, {w₁C₄H₈SO₂ + w₂C₈H₁₀ + (1 − w₁ − w₂)C₆H₁₄}, {w₁C₄H₈SO₂ + w₂C₃H₈O + w₃C₇H₈ + (1 − w₁ − w₂ − w₃)C₆H₁₄} and also systems containing water: {w₁C₄H₈SO₂ + w₂H₂O + w₃C₇H₈ + (1 − w₁ − w₂ − w₃)C₆H₁₄} and {w₁C₄H₈SO₂ + w₂H₂O + w₃C₈H₁₀ + (1 − w₁ − w₂ − w₃)C₆H₁₄} (w = mass fraction) were obtained at T = 303.15 K. The (liquid + liquid) equilibrium data of the systems were used to obtain interaction parameters in non-random two-liquid (NRTL) and universal quasi-chemical theory (UNIQUAC) activity coefficient models. These parameters can be used to predict equilibrium data of ternary and quaternary systems. The root mean square deviations (RMSDs) using these models were calculated and reported. The partition coefficients and the selectivity factors of solvents for extraction of toluene or m-xylene from n-hexane at T = 303.15 K are calculated and presented. The experimental selectivity factors of sulfolane for the system {w₁C₄H₈SO₂ + w₂C₇H₈ + (1 − w₁ − w₂)C₆H₁₄} at T = 298.15 K and T = 323.15 K were taken from the literature and the influence of temperature on the extraction of toluene was also investigated. The phase diagrams for the ternary and quaternary systems including both the experimental and correlated tie lines are presented. The tie-line data of the studied systems were also correlated using the Hand equation and the correlation parameters are calculated and reported.     

Evaluation of the inhibitive effect of essential oil of Lavandula multifida L., on the corrosion behavior of C38 steel in 0.5 M H2SO4 medium

The essential oil of the aerial parts of Lavandula multifida L., collected in Errachidia region (three samples) in southeast Morocco, was extracted by hydrodistillation and analyzed by GC and GC-MS. The oil was predominated by carvacrol (57.9–59.0%). L. multifida oil was tested as corrosion inhibitor of C38 steel in 0.5 M H₂SO₄ using weight loss measurements, electrochemical polarization, and EIS methods. The results obtained by measurements of weight loss showed that inhibition efficiency increases with inhibitor concentration to attain 72.2% at 2 g/l of oil at 298 K. Polarization curves revealed that L. multifida oil acts as mixed type inhibitor. The temperature effect on the corrosion behavior of steel in 0.5 M H₂SO₄ without and with the inhibitor at 2 g/l was studied in the temperature range from 303 and 343 K. The adsorption of inhibitor on the C38 steel surface was found to be a spontaneous process and to obey Langmuir’s adsorption isotherm. The associated activation energy has been determined.     

Synergistic inhibition effects between leaves and stem extracts of Sida acuta and iodide ion for mild steel corrosion in 1 M H2SO4 solutions

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 1 M H₂SO₄ by leaves and stem extracts of Sida acuta was studied using weight loss and hydrogen evolution methods at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. Addition of iodide ions enhances the inhibition efficiency to a considerable extent. The inhibition efficiency increases with increase in the iodide ion concentration but decreases with rise in temperature. Adsorption of the extracts alone and in combination of iodide ion was found to obey Freundlich adsorption isotherm at all temperatures studied. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. The synergism parameter (S₁) is defined and evaluated from the inhibition efficiency values. This parameter for the different concentrations of iodide ions from the two techniques employed is found to be greater than unity indicating that the enhanced inhibition efficiency of the extracts caused by the addition of iodide ions is due to synergism.     

(Solid + liquid) isothermal evaporation phase equilibria in the aqueous ternary system (Li2SO4 + MgSO4 + H2O) at T = 308.15 K

The solubility and the density in the aqueous ternary system (Li₂SO₄ + MgSO₄ + H₂O) at T = 308.15 K were determined by the isothermal evaporation. Our experimental results permitted the construction of the phase diagram and the plot of density against composition. It was found that there is one eutectic point for (Li₂SO₄ · H₂O + MgSO₄ · 7H₂O), two univariant curves, and two crystallization regions corresponding to lithium sulphate monohydrate (Li₂SO₄ · H₂O) and epsomite (MgSO₄ · 7H₂O). The system belongs to a simple co-saturated type, and neither double salts nor solid solution was found. Based on the Pitzer ion-interaction model and its extended HW models of aqueous electrolyte solution, the solubility of the ternary system at T = 308.15 K has been calculated. The predicted solubility agrees well with the experimental values.     

Assembly of succinic acid and isoxazolidine motifs in a single entity to mitigate CO2 corrosion of mild steel in saline media

Inhibition of CO₂ corrosion of mild steel in 0.5 M NaCl under atmospheric pressure at 40 °C as well as high pressure (10 bar) at 120 °C by 2-[2-methyl-4(or 5)-alkylisoxazolidin-5(or 4)-yl)methyl]succinic acids, a new class of molecules having inhibitive motifs of succinic acid, isoxazolidine and hydrophobic alkyl chain assembled in a single entity, has been examined by gravimetric and electrochemical methods. Inhibitor molecule containing CH₃(CH₂)₈ outperformed its counterpart with a shorter hydrophobe CH₃(CH₂)₄ and two other commercial imidazoline-based inhibitors. The effectiveness of these new inhibitors was also evaluated by electrochemical impedance spectroscopy. The inhibition efficiency by EIS was found to be 75%, 91% and 98% in the presence of 1, 5 and 20 ppm, respectively, at 40 °C. The potentiodynamic polarization studies indicated that the new inhibitors act as anodic inhibitors. The adsorption of the synthesized inhibitors follows Temkin adsorption isotherm model with favorable high values of –ΔG°_ads and −ΔH°_ads pointing the inhibitors adsorbed on the metal surface by chemisorption process. The XPS study confirmed the adsorption of the inhibitors on the metal surface.     

Gas phase dissociation of H2SO4: A computational study

The decomposition of gaseous sulfuric acid has been investigated computationally. In particular the role of the hydrated gaseous coordination adducts of SO₃(g) and H₂SO₄(g) in the (dissociation + decomposition) process has been evaluated. A first principles study of the gaseous coordination complexes SO₃(H₂O)_n (n = 1 to 3) and H₂SO₄(H₂O)_m (m = 1 to 2) has been carried out deriving equilibrium ground state structures, vibrational frequencies and energetic stabilities by the Moller–Plesset perturbation approximation. These results have been used to derive the enthalpy of formation at 0 K and the Gibbs energy functions of these molecules. A new thermodynamic modeling of the decomposition of H₂SO₄(g) has been therefore performed considering the effect of temperature, pressure and initial composition of the gas (hydration conditions).     

Direct electron transfer of cytochrome c and its biosensor based on gold nanoparticles/room temperature ionic liquid/carbon nanotubes composite film

A robust and effective composite film based on gold nanoparticles (GNPs)/room temperature ionic liquid (RTIL)/multi-wall carbon nanotubes (MWNTs) modified glassy carbon (GC) electrode was prepared by a layer-by-layer self-assembly technique. Cytochrome c (Cyt c) was successfully immobilized on the RTIL-nanohybrid film modified GC electrode by electrostatic adsorption. Direct electrochemistry and electrocatalysis of Cyt c were investigated. The results suggested that Cyt c could be tightly adsorbed on the modified electrode. A pair of well-defined quasi-reversible redox peaks of Cyt c was obtained in 0.10 M, pH 7.0 phosphate buffer solution (PBS). RTIL-nanohybrid film showed an obvious promotion for the direct electron transfer between Cyt c and the underlying electrode. The immobilized Cyt c exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis currents increased linearly to the H₂O₂ concentration in a wide range of 5.0 × 10⁻⁵– 1.15 × 10⁻³ M. Based on the multilayer film, the third-generation biosensor could be constructed for the determination of H₂O₂.     

Pitzer ion-interaction parameters for Fe(II) and Fe(III) in the quinary {Na + K + Mg + Cl + SO4 + H2O} system at T=298.15 K

This paper describes a chemical model that calculates (solid + liquid) equilibria in the {m₁FeCl₂ + m₂FeCl₃}(aq), {m₁FeSO₄ + m₂Fe₂(SO₄)₃}(aq), {m₁NaCl + m₂FeCl₃}(aq), {m₁Na₂SO₄ + m₂FeSO₄}(aq), {m₁NaCl + m₂FeCl₂}(aq), {m₁KCl + m₂FeCl₃}(aq), {m₁K₂SO₄ + m₂Fe₂(SO₄)₃}(aq), {m₁KCl + m₂FeCl₂}(aq), {m₁K₂SO₄ + m₂FeSO₄}(aq), and {m₁MgCl₂ + m₂FeCl₂}(aq) systems, where m denotes molality at T=298.15 K. The Pitzer ion-interaction model has been used for thermodynamic analysis of the experimental activity data in binary FeCl₂(aq) and FeCl₃(aq) solutions, and ternary solubility data, presented in the literature. The thermodynamic functions needed (binary and ternary parameters of ionic interaction, thermodynamic solubility products) have been calculated and the theoretical solubility isotherms have been plotted. The mixed solution model parameters {θ(MN) and ψ(MNX)} have been chosen on the basis of the compositions of saturated ternary solutions and data on the pure water solubility of the K₂SO₄ · FeSO₄ · 6H₂O double salt. The standard chemical potentials of four ferrous {FeCl₂ · 4H₂O, Na₂SO₄ · FeSO₄ · 4H₂O, K₂SO₄ · FeSO₄ · 6H₂O, and MgCl₂ · FeCl₂ · 8H₂O} and three ferric {FeCl₃ · 6H₂O, 2KCl · FeCl₃ · H₂O, and 2K₂SO₄ · Fe₂(SO₄)₃ · 14H₂O} solid phases have been determined. Comparison of solubility predictions with experimental data not used in model parameterization is given. The component activities of the saturated {m₁MgSO₄ + m₂FeSO₄}(aq) and in the mixed crystalline phase were determined and the change of the molar Gibbs free energy of mixing Δ_mixG^∘_m(s) of crystals was determined as a function of the solid phase composition. It is established that at T=298.15 K the mixed (Mg,Fe)SO₄ · 7H₂O and (Fe,Mg)SO₄ · 7H₂O crystals show small positive deviations from the ideal mixed crystals. Limitations of the {Fe(II) + Fe(III)} model due to data insufficiencies are discussed.