DFT study of structural, electronic, vibrational, and magnetic properties of the chirality cage-like molecule C24O12

Bonding, vibrational and magnetic properties of the cage-like molecule C(24)O(12) are studied by DFT calculations. Infrared- and Raman-active vibrational frequencies of the cage-like molecule C(24)O(12) are assigned. Two (13)C and one (17)O nuclear magnetic resonance (NMR) spectral signals of the cage-like molecule C(24)O(12) are characterized. Heat of formation of the cage-like molecule C(24)O(12) is estimated. Compared to C(60) and the cage-like molecule C(24)O(12), only from the thermodynamic points of view, C(24)O(12) is more stable than C(60). Thus we believe that the cage-like molecule C(24)O(12) has sufficient stability to allow its experimental preparation. We proposed that it could be synthesized by using the condensation of molecules C(6)(OH)(6) and C(12)Cl(12). Since the symmetry of C(24)O(12) is D(6), it is a chiral molecule.     

Effect of Chemical Composition of Fullerenes on the Structure and Internal Rotation Barrier of Encapsulated Ammonia Borane Molecule

Russian Journal of General Chemistry - Investigation of the structure and conformational properties of ammonia borane molecule in the cavity of C60, C12B24N24, B36N24, C70, B41N29, C80, C14B33N33,...     

<Superscript>133</Superscript>Cs NMR Study of Cs<Superscript>+</Superscript> Ion Complexes with Dibenzo-24-crown-8, Dicyclohexano-24-crown-8 and Dibenzo-30-crown-10 in Binary Acetonitrile-Nitromethane Mixtures

Complexation of the cesium ion with the macrocyclic ligands: dibenzo-24-crown-8 (DB24C8), dicyclohexano-24-crown-8 (DC24C8) and dibenzo-30-crown-10 (DB30C10) was studied in binary acetonitrile-nitromethane mixtures by ¹³³Cs NMR spectroscopy. The ¹³³Cs chemical shift data indicated that the cesium cation forms 1:1 cation:ligand complexes with DB24C8 and DB30C10 but forms 2:1, 1:1 and 1:2 cation:ligand complexes with DC24C8 in acetonitrile-nitromethane mixtures. The formation constants of the complexes were calculated from the computer fitting of the chemical shift mole ratio data. The results show that the complex formation constants with the Cs⁺ cation vary in the order DC24C8>DB24C8∼DB30C10. It was found that the stability of the resulting complexes increases with increasing nitromethane concentration in the solvent mixture.     

Th-C60F24

The regioselective fluorination of Th-C60Br24 with XeF2 in anhydrous HF at 25 degrees C produced Th-C60F24, which is isostructural with Th-C60Br24. The compound, the first example of a fluorofullerene with a noncontiguous pattern of F-bearing sp3 C atoms, was characterized by EI and ESI mass spectrometry and by 19F NMR (single resonance at delta -144 for all 24 F atoms), 13C NMR (two resonances at delta 145.9 (C=C) and delta 83.5 (C-F; JCF = 212 Hz), and FTIR spectroscopy. DFT calculations revealed that at least two other isomers of C60F24 are more stable than Th-C60F24 by >/=280 kJ mol-1, demonstrating that Th-C60F24 is a kinetically stable fluorofullerene.     

Toward the synthesis of norzoanthamine: complete fragment assembly

The complex marine alkaloid norzoanthamine (2) was envisioned to be assembled from three key building blocks: the C1-C5 fragment A, the C6-C10 fragment B, and the C11-C24 fragment C. The synthesis of fragment A was achieved in 14 steps and 33% overall yield from (R)-gamma-hydroxymethyl-gamma-butyrolactone. Fragment B was made in two steps from PMB-protected 4-pentynol in 76% yield. The C11-C24 fragment C was made from (S)-carvone via (R)-isocarvone in 18 steps (6% overall yield). The convergent stereoselective synthesis of the entire carbon framework (C1-C24) of the target molecule was achieved via the following assemblage. Alkenyl iodide 20 derived from the C11-C24 fragment C was coupled to fragment B (C6-C10) through a high-yielding Stille coupling reaction of these two sterically very demanding coupling partners, affording the key Diels-Alder precursor 24. The intramolecular Diels-Alder reaction proceeded smoothly in excellent yield and diastereoselectivity, generating the tricyclic trans-anti-trans perhydrophenanthrene motif of norzoanthamine (C6-C24). The final fragment coupling between lithiated fragment A (C1-C5) and aldehyde 40 (C6-C24) has also been successfully accomplished affording the entire carbon framework of the natural product.     

Enzymatic metabolism of ergosterol by cytochrome p450scc to biologically active 17alpha,24-dihydroxyergosterol

We demonstrate the metabolism of ergosterol by cytochrome P450scc in either a reconstituted system or isolated adrenal mitochondria. The major reaction product was identified as 17alpha,24-dihydroxyergosterol. Purified P450scc also generated hydroxyergosterol as a minor product, which is probably an intermediate in the synthesis of 17alpha,24-dihydroxyergosterol. In contrast to cholesterol and 7-dehydrocholesterol, cleavage of the ergosterol side chain was not observed. NMR analysis clearly located one hydroxyl group to C24, with evidence that the second hydroxyl group is at C17. 17alpha,24-Dihydroxyergosterol inhibited cell proliferation of HaCaT keratinocytes and melanoma cells. Thus, in comparison with cholesterol and 7-dehydrocholesterol, the 24-methyl group and the C22-C23 double bond of ergosterol prevent side chain cleavage by P450scc and change the enzyme's hydroxylase activity from C22 and C20, to C24 and C17, generating bioactive product.     

Scanning tunneling microscopy observation of self-assembled monolayers of strapped porphyrins

In this paper, we reveal that the free-base and zinc strapped porphyrins possessing long alkyl chains, C 24OPP-HQ and Zn(C 24OPP-HQ), respectively, can be arranged on surfaces. We used scanning tunneling microscopy (STM) to observe alkyl-chain-assisted self-assembled monolayers (SAMs) of these strapped porphyrins at the solid-liquid interface. STM images revealed that the strapped benzene moiety was detectable on the porphyrin core: that is, the strapped porphyrins could be differentiated from nonstrapped analogues. We compared the population of the nonstrapped porphyrin (C 24OPP) and either of the strapped porphyrins C 24OPP-HQ or Zn(C 24OPP-HQ) in the mixed SAMs. We then confirmed that Zn(C 24OPP-HQ) is more favorably incorporated in the mixed SAMs than C 24OPP-HQ. From (1)H NMR spectroscopic and X-ray crystallographic analyses, we concluded that the factors increasing the population of Zn(C 24OPP-HQ) in the mixed SAMs are the enhanced rigidity of the porphyrin core by the zinc coordination and the flat structure of the porphyrin moiety in the saddle conformation. This study demonstrates that strapped porphyrins possessing long alkyl chains are available to arrange the functional modules on the surface via chemical modification on the strapped moiety.     

Ammonium ion binding with pyridine-containing crown ethers

Dipyrido[24]crown-8 (DP24C8) has been synthesized and shown to form [2]pseudorotaxanes spontaneously with dibenzylammonium ions. These complexes, which have been demonstrated by (1)H NMR spectroscopy to form faster in solution than when the macrocyclic polyether is dibenzo[24]crown-8 (DB24C8), are also stronger than their DB24C8 counterparts. One of the [2]pseudorotaxanes has been used to construct a [2]rotaxane (see above) comprising a dumbbell-shaped component based on a dibenzylammonium ion which is encircled by a DP24C8 macrocycle and terminated by (triphenylphosphonium)methyl stoppers.     

DFT Studies on Thermal Stabilities,Electronic Structures,and ~（13）C Chemical Shifts of C_（24）O_2 Based on Fullerene C_（24）（D_6）

Quantum chemical calculations on some possible equilibrium geometries of C24O2 isomers derived from C24 (D6) and C24O have been performed using density functional theory (DFT) method. The geometric and electronic structures as well as the relative energies and thermal stabilities of various C24O2 isomers at the ground state have been calculated at the B3LYP/6-31G(d) level of theory. And the 1,4,2,5-C24O2 isomer was found to be the most stable geometry where two oxygen atoms were added to the longest carbon-carbon bonds in the same pentagon from a thermodynamic point of view. Based on the optimized neutral geometries, the vertical ionization potential and vertical electron affinity have been obtained. Meanwhile, the vibrational frequencies, IR spectrum, and 13C chemical shifts of various C24O2 isomers have been calculated and analyzed.     

Weinreb Amide,Ketone and Amine as Potential and Competitive Secondary Molecular Stations for Dibenzo-[24]Crown-8 in [2]Rotaxane Molecular Shuttles

This paper reports the synthesis and study of new pH-sensitive DB24C8-based [2]rotaxane molecular shuttles that contain within their axle four potential sites of interaction for the DB24C8: ammonium, amine, Weinreb amide, and ketone. In the protonated state, the DB24C8 lay around the best ammonium site. After either deprotonation or deprotonation-then-carbamoylation of the ammonium, different localizations of the DB24C8 were seen, depending on both the number and nature of the secondary stations and steric restriction. Unexpectedly, the results indicated that the Weinreb amide was not a proper secondary molecular station for the DB24C8. Nevertheless, through its methoxy side chain, it slowed down the shuttling of the macrocycle along the threaded axle, thereby partitioning the [2]rotaxane into two translational isomers on the NMR timescale. The ketone was successfully used as a secondary molecular station, and its weak affinity for the DB24C8 was similar to that of a secondary amine.     

Exploratory,Regression, and Neural Network Analysis of the Stability of Cation Coronates in Selected Pure Solvents

Russian Journal of General Chemistry - Exploratory, regression, and neural network analysis of the stability constants of crown ether [12C4, 16C5, (CH3)216C5, DB21C7, DB24C8, DCH24C8, DB30C10] 1 :...     

ESR and theoretical studies of trimer radical cations of coronene

Highly resolved ESR spectra of monomer, dimer and trimer radical cations of coronene (C24H12) were observed at room temperature for a solution of 1,1,1,3,3,3-hexafluoro-2-propan-2-ol (HFP) containing thallium(III) trifluoroacetate as oxidant. The spectra consisting of multiple lines with isotropic 1H-hyperfine splitting (hfs) constants of 0.0766 mT (24H) and 0.013 mT (6H) were attributable to a mixture of the dimer with the trimer radical cations, (C24H12)2+ and (C24H12)3+. For (C24H12)2+, the 1H-hfs constant agreed well with the reported value, 0.077 mT. However, for (C24H12)3+, the values were significantly different from the reported ones, 0.117 mT (12H) and 0.020 mT (24H), by Ohya Nishiguchi et al. [H. Ohya-Nishiguchi, H. Ide, N. Hirota, Chem. Phys. Lett. 66 (1979) 581], but rather similar to those reported by Willigen et al. [H. van Willigen, E. De Boer, J.T. Cooper, W.F. Forbes, J. Chem . Phys. 49 (1968) 1190]. In conflict with Willigen's report, however, no ESR line broadening which has been ascribed to a low stationary concentration of (C24H12)3+ was detected. Based on ab initio MO calculations for benzene as a compact model of C24H12, the structure of (C24H12)3+ was investigated in terms of the observed 1H-hfs constants. A staggered sandwich C(2v) structure was suggested being at the "global" minimum for the benzene trimer cation. In the structure, the unpaired electron spin is predominantly localized to the central ring, which is qualitatively in agreement with the previous ESR results of (C24H12)3+ by Ohya-Nishiguchi et al. In addition, as a "local" minimum, the benzene trimer was indicated to have a slipped sandwich Cs structure, which is less stable by ca. 19 kJ mol(-1) than the "global" minimum. In this structure, the unpaired electron spin was nearly equally distributed on both the central and one of the two side C24H12 molecules. The observed 1H-hfs constants were possibly attributable to the (C24H12)3+ cation with the analogous slipped sandwich Cs structure.     

Is the tert-butyl group bulky enough to end-cap a pseudorotaxane with a 24-crown-8-ether wheel?

Although rotaxane chemists have long believed that the tert-butyl group is bulkier than the cavity of dibenzo-24-crown-8-ether (DB24C8), it is essentially smaller than the cavity of DB24C8. The tert-butyl (or 4-tert-butylphenyl) group can actually function as an end-cap of DB24C8-based rotaxanes when the intercomponent interaction is effectively operative. When such attractive interaction is removed, deslippage occurs. [structure: see text]     

2]Pseudorotaxanes, [2]rotaxanes and metal-organic rotaxane frameworks containing tetra-substituted dibenzo[24]crown-8 wheels

[2]Pseudorotaxanes, [2]rotaxanes and metal-organic rotaxane framework materials that utilise DB24C8 as the wheel component are well known and structural variations based on changing the axle component are common. Studies in which the DB24C8 wheel is structurally modified are much more limited. Herein, is described the synthesis of symmetrical DB24C8 analogues containing four CH(2)OR (R = CH(2)CH(2)CH(3), CH(2)(C(6)H(5)), C(6)H(5) and C(6)H(4)(4-COOEt)) substituents on the 4 and 5 positions of the aromatic rings. The effect of these molecular appendages on the stability and structures of the interpenetrated and interlocked molecules derived from these new wheels is described. The major effects are an increase in association constants for the formation of [2]pseudorotaxanes relative to DB24C8, the crystal packing of [2]rotaxanes and a change on the internal structure of a 2D MORF (R = C(6)H(5)) compared to DB24C8.     

Biosynthetic studies of marine lipids—3 : Experimental demonstration of the course of side chain extension in marine sterols

The Pacific sponge Aplysina fistularis was fed cholesterol-[4-¹⁴C],(24R)-methyl-25-dehydrocholesterol-[26-¹⁴C] (epicodisterol[26-¹⁴C]), (24S)-methyl-25-dehydrocholesterol-[26-¹⁴C] (codisterol-[26-¹⁴C]), and 24-methylenecholesterol-[28-¹⁴C]. Only epicodisterol, which has the same stereochemistry at C-24 as (24R,25S)-24,26-dimethylcholesterol (aplysterol), was converted with high efficiency into (24R)-24,27-dimethyl-25-dehydrocholesterol (25-dehydroaplysterol). Further side chain extension [to E-(24R)-24,26,27-trimethyl-25-dehydrocholesterol (verongulasterol)] could also be demonstrated.     

Chemical and electrochemical formation of pseudorotaxanes composed of alkyl(ferrocenylmethyl)ammmonium and dibenzo[24]crown-8

Protonation of p-xylylaminomethylferrocene (1) and n-hexylaminomethylferrocene (2) by HCl and NH(4)PF(6) forms the ferrocenylmethyl(alkyl)ammonium salt. Inclusion of the compounds by dibenzo[24]crown-8 (DB24C8) produces [2]pseudorotaxanes, [(DB24C8)(1-H)](+)(PF(6)) and [(DB24C8)(2-H)](+)(PF(6)), respectively. X-ray diffraction of the former product indicates an interlocked structure composed of the axis and the macrocyclic molecule. Intermolecular N-H...O and C-H...O interactions and stacking of the aromatic planes are observed. [(DB24C8)(1-H)](+)(PF(6)), in the solid state, is characterized by IR spectroscopy and elemental analyses. A similar reaction of 1,1'-bis(p-xylylaminomethyl)ferrocene (3) forms a mixture of [2] and [3]pseudorotaxanes, [(DB24C8)(3-H(2))](2+)(PF(6))(2) and [(DB24C8)(2)(3-H(2))](2+)(PF(6))(2). The latter product having two DB24C8 molecules is isolated and characterized by X-ray crystallography. Formation of these pseudorotaxanes in a CD(3)CN solution is evidenced by (1)H NMR and mass spectrometry. Electrochemical oxidation of 1-3 at 0.4 V (vs Ag(+)/Ag) in the presence of TEMPOH (1-hydroxy-2,2,6,6-tetramethylpiperidine) and DB24C8 affords the corresponding pseudorotaxanes. The ESR spectrum of the reaction mixture indicates the formation of a TEMPO radical in high yield. Details of the conversion of the dialkylamino group of the ligand to the dialkylammonium group are investigated by using a flow electrolysis method linked to spectroscopic measurements. The proposed mechanism for the reaction involves the ferrocenium species, formed by initial oxidation, which undergoes electron transfer from nitrogen to the Fe(III) center, producing a cation radical at the nitrogen. Transfer of hydrogen from TEMPOH to the cation radical and inclusion of the resulting dialkylammonium species by DB24C8 yields the pseudorotaxanes.     

Four‐State Molecular Shuttling of [2]Rotaxanes in Response to Acid/Base and Alkali‐Metal Cation Stimuli

In this study, we synthesized [2]rotaxanes possessing three recognition sites—a dialkylammonium, an alkylarylamine, and a tetra(ethylene glycol) stations—in their dumbbell‐like axle component and dibenzo[24]crown‐8 (DB24C8) as their macrocyclic component. These [2]rotaxanes behaved as four‐state molecular shuttles: i) under acidic conditions, the DB24C8 unit encircled both the dialkylammonium and alkylarylammonium stations; ii) under neutral conditions, the dialkylammonium unit was the predominant station for the DB24C8 component; iii) under basic conditions, when both ammonium centers were deprotonated, the alkylarylamine unit became a suitable station for the DB24C8 component; and iv) under basic conditions in the presence of an alkali‐metal cation, the tetra(ethylene glycol) unit recognized the DB24C8 component through cooperative binding of the alkali‐metal ion. In addition, we observed that the [2]rotaxanes exhibited selective recognition for metal cations. These shuttling motions of the macrocyclic component proceeded reversibly.     

Synthesis and structure of cuboctahedral and anticuboctahedral cages containing 12 quadruply bonded dimolybdenum units

The syntheses and structures of two clusters containing 12 Mo-Mo quadruple bonds, [Mo(24)(C(12)H(12)O(4))(24)](C(5)H(5)N)(12) and Mo(24)(C(8)H(4)O(4))(24), are reported. The 12 paddlewheel building blocks and 24 ligands self-assemble into cuboctahedral and anticuboctahedral polyhedra, respectively, depending on the manner in which the two halves of the cluster are aligned. These clusters contain twice as many dimolybdenum units as any previously reported cluster. Possible assembly mechanisms are also proposed.     

Giant porphyrin wheels with large electronic coupling as models of light-harvesting photosynthetic antenna

Starting from a 1,3-phenylene-linked diporphyrin zinc(II) complex 2ZA, repeated stepwise Ag(I)-promoted coupling reactions provided linear oligomers 4ZA, 6ZA, 8ZA, and 12ZA. The intramolecular cyclization reaction of 12ZA under dilute conditions (1x10(-6) M) gave porphyrin ring C12ZA with a diameter of approximately 35 A in 60% yield. This synthetic strategy has been applied to a 1,3-phenylene-linked tetraporphyrin 4ZB to provide 8ZB, 12ZB, 16ZB, 24ZB, and 32ZB. The intramolecular coupling reaction of 24ZB gave a larger 24-mer porphyrin ring C24ZB with a diameter of approximately 70 A in 34% yield. These two large porphyrin rings were characterized by means of 1H NMR spectroscopy, matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectroscopy, UV-visible spectroscopy, gel permeation chromatography (GPC) analysis, and scanning tunneling microscopy (STM) techniques. The STM images of C12ZA reveal largely circular structures, whereas those of C24ZB exhibit mostly ellipsoidal shapes, indicating more conformational flexibility of C24ZB. Similar to the case of C12ZA, the efficient excitation energy transfer along the ring has been confirmed for C24ZB by using the time-correlated single-photon counting (TCSPC) and picosecond transient absorption anisotropy (TAA) measurements, and occurs with a rate of (35 ps)(-1) for energy hops between neighboring tetraporphyrin subunits. Collectively, the present work provides an important step for the construction of large cyclic-arranged porphyrin arrays with ample electronic interactions as a model of light-harvesting antenna.     

Preparation and crystallographic characterization of C60Cl24

C60Cl24 has been synthesized by the chlorination of C60 with VCl4 or C60Br24 with SbCl5; the X-ray single crystal structure of C60Cl24.2Br2 confirmed the molecular T(h) symmetry in good agreement with the IR data and theoretical calculations.