Characteristics of Au/MgxAlO hydrotalcite catalysts in CO selective oxidation

Gold catalysts, supported on a solid base of Mg_xAlO hydrotalcite, were prepared by a modified deposition precipitation method for CO selective oxidation. The preparation parameters and pretreatment of the catalysts were investigated. The pH and the HAuCl₄ concentration in the initial solution, and the Mg/Al molar ratio of Mg_xAlO affected the pH in the final solution and determined the actual gold loading of the catalyst. The calcination temperatures of the Mg_xAlO support and the Au/Mg_xAlO catalyst dominated the Au³⁺/Au⁰ ratio on the catalyst. The pretreatment of the catalyst as well as the gold loading and the Au³⁺/Au⁰ ratio, critically determined the activity of the catalyst for CO selective oxidation. Based on XPS and in situ DR-FTIR analyses, a mechanism for CO selective oxidation on 2%Au/Mg₂AlO was proposed. The hydroxyl group on Mg₂AlO also participated in the reaction.     

Une extension de la méthode CNDO/2 á l'étude des complexes d'éléments de transition

An extension of the CNDO/2 formalism, similar to the method of Clack, Hush and Yandle but with a different parametrisation, is proposed for investigating the electronic structure of transition metal complexes. The results for Ni(CO)₄ and Ni(PF₃)₄ agree well with those ofab initio calculations and with some experimental data. Such a semi-empirical approach may be performed, usingab initio results as reference data, in order to interpret the physical and chemical behaviour of largeseries of complexes in their ground state.

     

Some theoretical aspects of vibrational fine structure accompanying core ionizations in N2 and CO

Ab initio calculations have been carried out on CO and N₂ and the relevant core hole states with different basis sets to investigate differences in geometries and force constants. From these calculations vibrational band profiles of the core level ESCA spectra for these molecules have been interpreted, obviating the need to rely on data pertaining to the equivalent core species. The agreement with experimental profiles is excellent. The O_1s level of CO which has not been subjected to detailed theoretical analysis previously, is predicted to show substantial vibrational structure in excellent agreement with recently acquired experimental data. The effect of temperature on the band profiles has also been considered. Theoretically derived core binding and relaxation energies of these systems have been investigated both as a function of basis set, and of internuclear distance. Density difference contours have been computed and give a straightforward pictorial representation of the substantial electron reorganizations accompanying core ionizations. Small basis sets with valence exponents appropriate to the equivalent core species when used in hole state calculations describe bond lengths, force constants, core binding energies and relaxation energies with an accuracy comparable to that appropriate to the corresponding extended basis set calculations.     

Superstructure and stacking faults in hydrothermal-grown KBe2BO3F2 crystals

The structure of the hydrothermal-grown nonlinear optical crystal KBe₂BO₃F₂ was investigated. A new structure of the R3?c space group with cell parameters of a=4.422(1) Å and c=37.524(3) Å was obtained by powder X-ray diffraction and Rietveld refinement. The new structure is a 1×1×2 superstructure of the previously reported R32 structure with a different stacking sequence of (Be₂BO₃F₂)_∞ layers along the c axis. The relationship between the refined structure and the experimental results is discussed. A stacking fault mechanism is proposed for the formation of the superstructure as well as the nonuniformity of the hydrothermal-grown KBBF crystals.     

g-C_3N_4/CaTi_2O_5复合材料制备及其光催化性能

利用类石墨氮化碳(g-C_3N_4)和亚稳相钙钛氧化物(CaTi_2O_5)固相法制备C_3N_4/CaTi_2O_5复合材料。利用X射线衍射(XRD)、金相显微镜、扫描电子显微镜(SEM)及附带能谱分析仪(EDS)和N2吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计(UV-Vis)测试了样品的光吸收性能,研究C_3N_4与CaTi_2O_5物质的量之比(nC_3N_4/nCaTi_2O_5)对C_3N_4/CaTi_2O_5复合样品的物相结构和微观形貌的影响,同时考察C_3N_4/CaTi_2O_5复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明:相比纯C_3N_4和CaTi_2O_5样品,C_3N_4/CaTi_2O_5复合样品在可见光下具有较高的光催化性能,随着nC_3N_4/nCaTi_2O_5增加,样品的光催化降解率随之增加而后降低,当nC_3N_4/nCaTi_2O_5=1∶1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

Multinuclear NMR studies on substituted derivatives of Rh6(CO)16 in solution

Multinuclear NMR data (¹³C, ³¹P, ¹³C–{³¹P}, ¹³C–{¹⁰³Rh} and ³¹P–{¹⁰³Rh}) for a series of mono- and di-substituted derivatives of Rh₆(CO)₁₆ containing neutral two electron donor ligands [Rh₆(CO)₁₅L, (L=NCMe, py, cyclooctene, PPh₃, P(OPh)₃,1/2(μ₂,η¹:η¹-dppe)); Rh₆(CO)₁₄(LL), (LL=cis-CH₂=CMe-CMe=CH₂, dppm, dppe, (P(OPh)₃)₂)] are reported; these data show that the solid state structure is maintained in solution. Detailed assignments of the ¹³CO NMR spectra of Rh₆(CO)₁₅(PPh₃) and Rh₆(CO)₁₄(dppm) clusters have been made on the basis ¹³C–{¹⁰³Rh} double resonance measurements and the specific stereochemical features of the observed long range couplings in these clusters have been studied. The stereochemical dependence of ³J(P–C) for terminal carbonyl ligands is discussed and the values of ³J(P–C) are found to be mainly dependent on the bond angles in the P–Rh–Rh–C fragment; these data enable the fine structure of the complex multiplets in the ¹³C–{¹H} and ³¹P–{¹H} NMR spectra of Rh₆(CO)₁₄ (dppm) to be simulated. Variable temperature ¹³C–{¹H} NMR measurements on Rh₆(CO)₁₅(PPh₃) reveal the carbonyl ligands in this complex to be fluxional. The fluxional process involves exchange of all the CO ligands except the two terminal CO's associated with the rhodium trans to the substituted rhodium and can be explained by a simple oscillation of the PPh₃ on the substituted rhodium atom aided by concomitant exchange of the unique terminal CO on this rhodium with adjacent μ₃-CO's.     

Ship-in-a-bottle formation of Ru3(CO)12 in zeolite NaY

A NaY zeolite entrapped Ru₃(CO)₁₂ cluster has been synthesized from RuCl₃ ionexchanged NaY, which are well characterized by IR and Raman spectroscopy and CO chemisorption. When the Ru³⁺/NaY sample is heated from 298 to 393 K for 25 h and kept for 10–20 h at 393 K, the sample color changes from dark to brown-yellow. Thein situ infrared spectrum exhibits bands at 2130, 2064, 2040, 2017, 1990, 1953 and 1925 cm⁻¹. The bands at 2064, 2040, 2017 and 1990 cm⁻¹ are assigned to Ru₃(CO)₁₂/NaY, which are close to crystalline Ru₃(CO)₁₂. Furthermore, Raman results provide the bands at 150 and 185 cm⁻¹, which are attributed to Ru-Ru bonds of crystalline Ru₃(CO)₁₂). CO chemisorption on [Ru₃]/NaY gives a CO/Ru ratio of 3.85, which is similar to the stoichiometry of Ru₃(CO)₁₂ (CO/Ru=4.0).     

Influence of MgO contents on silica supported nano-size gold catalyst for carbon monoxide total oxidation

A series of nano-size gold catalysts were prepared by deposition-precipitation method using silica material promoted with different amounts of MgO as the carrier. The influences of MgO addition on the structure and property of the nano-size gold catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), O2 temperature-programmed desorption (O2-TPD), and inductively coupled with plasma atomic emission spectroscopy (ICP-AES) techniques. The total oxidation of CO was chosen as the probe reaction. The results suggest that for the gold catalysts supported on the silica material after MgO modification, the size of the gold particles is pronouncedly reduced, the oxygen mobility is enhanced, and the catalytic activity for low-temperature CO oxidation is greatly improved. The gold catalyst modified by 6 wt% MgO (Mg/SiO2 weight ratio) shows higher CO oxidation activity, over which the temperature of CO total oxidation is lower about 150 K than that over the silica directly supported gold catalyst.     

MoS_2/g-C_3N_4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS_2,将其与石墨相氮化碳(g-C_3N_4)复合,制得MoS_2/g-C_3N_4复合材料。采用X射线衍射(XRD),扫描电镜(SEM),X射线光电子能谱(XPS),傅里叶变换红外光谱(FTIR),Raman光谱,紫外-可见漫反射吸收光谱(DRS)和光致荧光(PL)技术对复合材料进行表征。可见光下考察MoS_2/g-C_3N_4复合材料光催化降解罗丹明B(Rh B)的活性,结果表明:将少量MoS_2与g-C_3N_4复合可明显提高光催化活性,且1%(w/w)MoS_2/g-C_3N_4复合物的光催化活性最高,可能的原因是MoS_2和g-C_3N_4匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

MoS2/g-C3N4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS₂,将其与石墨相氮化碳（g-C₃N₄）复合,制得MoS₂/g-C₃N₄复合材料。采用X射线衍射（XRD）,扫描电镜（SEM）,X射线光电子能谱（XPS）,傅里叶变换红外光谱（FTIR）,Raman光谱,紫外-可见漫反射吸收光谱（DRS）和光致荧光（PL）技术对复合材料进行表征。可见光下考察MoS₂/g-C₃N₄复合材料光催化降解罗丹明B（RhB）的活性,结果表明：将少量MoS₂与g-C₃N₄复合可明显提高光催化活性,且1%（w/w）MoS₂/g-C₃N₄复合物的光催化活性最高,可能的原因是MoS₂和g-C₃N₄匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

Experimental and Theoretical Studies of a Pulsed Microwave Excited Ar/CF4 Plasma

The present work deals with a pulsed microwave discharge in an Ar/CF ₄ gas mixture under a low pressure (1–10 mbar). The discharge chamber developed has a cylindrical geometry with a coupling window alternatively made of quartz or alumina. The setup allows one to investigate the plasma–wall interactions (here etching of the quartz window) and the ignition process of the pulsed microwave plasma. Microwave pulses with a duration of 50–200 s and repetition rate between 1 and 10 kHz are typical for the experiments. The space-time behavior of the fluorine number density in the discharge has been investigated experimentally by optical actinometry. The discharge kinetics is modeled using electron-transport parameters and rate coefficients derived from solutions of the Boltzmann equation. Together with the solution of the continuity and electron balance equations and the rate equations describing the production of CF _x (x=2, 3, 4) radicals and F atoms, a good agreement between experimental and theoretical data can be achieved.     

Synthesis,characterization and luminescence of the tetranuclear gold cluster: [Au4{7,8-(PPh2)2-7,8-C2B9H10}2(PPh3)2]

A tetranuclear gold cluster has been synthesized by the reaction of [Au(PPh₃)NO₃] with the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in THF, and characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectroscopy and X-ray structure determination. The cluster crystallizes in the triclinic Pī, a?=?15.118(8)?Å, b?=?16.057(9)?Å, c?=?24.284(13)?Å, α?=?80.822(9)°, β?=?79.624(8)°, γ?=?81.938(8)°, Z?=?2, R ₁?=?0.0626, wR ₂?=?0.1894. A single crystal structure determination showed that four gold atoms form a tetrahedral framework. Among these four gold atoms, two were chelated by two nido carborane diphosphine [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]^? anions coming from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀, while the other two were ligated to two PPh₃ groups. The luminescence of this cluster was also investigated in dichloromethane solution at room temperature.     

Temperature dependence of the polarization resistance of the O<Subscript>2</Subscript>,Au/La<Subscript>0.88</Subscript>Sr<Subscript>0.12</Subscript>Ga<Subscript>0.82</Subscript>Mg<Subscript>0.18</Subscript>O<Subscript>2.85</Subscript> electrode system

The impedance of a porous gold electrode in contact with solid electrolyte La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 and the effect of the manufacture conditions on its polarization resistance are studied at 600–800°C in air. The overall oxygen reaction rate on a gold electrode is described as the sum of two partial constituents, namely, the oxygen exchange at the gas/electrolyte interface at the gold/gas/electrolyte triple-phased boundary.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 190–197.Original Russian Text Copyright © 2005 by Shkerin, Sokolova, Khlupin, Beresnev.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

Pt/MOx(M=Ni,Fe,Co,Ce)催化剂上CO氧化反应中抗H2O与CO2的性能研究

我们研究了4种负载型Pt催化剂（1Pt/NiO、1Pt/FeO_x、1Pt/Co₃O₄和Pt/CeO₂）上不同反应条件下CO氧化活性及抗H₂O和CO₂性能.发现反应气氛中CO₂的加入与CO形成了竞争吸附,并在催化剂表面形成了碳酸盐物种堵塞了活性位,从而导致催化剂失活.反应气氛中H₂O的加入对1Pt/CeO₂催化剂的活性有所抑制,但对1Pt/FeO_x、1Pt/NiO和1Pt/Co₃O₄催化剂的活性却有促进作用.在1Pt/FeO_x和1Pt/CeO₂催化剂上的分步反应实验和动力学研究表明,尽管H₂O的加入在两种催化剂上均与CO形成了竞争吸附,但在1Pt/FeO_x催化剂上H₂O在载体表面解离形成的羟基更易与CO反应,开辟了新的反应途径,从而提高了反应性能.此外,H₂O的加入能有效分解该催化剂上的碳酸盐物种,从而保持了其稳定性.     

基于N-乙酰-L-半胱氨酸修饰的ZnFe2O4@SiO2纳米材料手性识别酪氨酸对映异构体

我们将N-乙酰-L-半胱氨酸（NALC）修饰于ZnFe₂O₄@SiO₂纳米材料表面,制备了一种新型的手性纳米复合物（ZnFe₂O₄@SiO₂-NALC）,该材料能够简便、快速及高选择性地识别手性酪氨酸（Tyr）对映体。利用X射线粉末衍射（XRD）、红外光谱（FT-IR）、能量色散X射线光谱（EDS）、扫描电子显微镜（SEM）、高分辨率透射电子显微镜（HRTEM）和振动样品磁力计（VSM）等一系列表征手段对首次合成出的ZnFe₂O₄@SiO₂-NALC进行测试表征,并将其应用于对手性识别领域的探究。实验结果表明,利用光谱技术（紫外-可见光谱和荧光光谱）,ZnFe₂O₄@SiO₂-NALC可对Tyr对映异构体进行手性识别。此外,我们进一步对Tyr浓度和pH值等实验参数进行了优化。     

纳米钙钛矿型LaFe1-xNixO3(x=0~1.0)的制备及其在紫外光激发下的电化学性能

本文采用溶胶-凝胶法制备了LaFe1-xNixO3(x=0,0.2,0.4,0.6,0.8,1.0)纳米晶粉末,利用XRD、TEM和电化学测试方法对LaFe1-xNixO3材料的相结构、形貌、成分组成和其在碱液中的充放电性能以及电化学动力学性能等方面进行了表征和分析,同时对电极受紫外光激发前后的电化学行为进行了对比研究。XRD和TEM分析表明,用硝酸盐作为原材料和溶胶-凝胶方法可制备出单一相结构的纳米晶钙钛矿型LaFe1-xNixO3复合氧化物,随Ni替代量x的增大,LaFe1-xNixO3的相结构由正交结构向菱面体结构转变,其分子体积和晶粒尺寸呈现减小的趋势。电化学研究结果表明,紫外光激发前,LaFe1-xNixO3电极的放电容量随x的增加而逐渐增大;光激发后,电极的放电容量和交换电流Io与未激发前相比显著提高,当x=0.4时其放电容量具有最大值483.1mAh·g-1,Io值由光激发前的3.54～11.58 mA·g-1大幅增加至激发后的8.37～40.11 mA·g-1。     

Bi2WO6/UiO-66复合材料的制备及其光催化性能

通过水热法制备了一种复合光催化剂Bi_2WO_6/UiO-66,探究了模板剂乙酸(CH_3COOH)对Ui O-66形貌的影响和2种中心元素Bi与Zr的不同物质的量之比对光催化性能的影响。通过XRD、SEM、N_2吸附-脱附、UV-Vis DRS、XPS等对催化剂的物相、形貌、比表面积、光吸收性能、元素组成等进行表征。实验结果表明,当n_(Bi)∶n_(Zr)=2∶1时,Bi_2WO_6/UiO-66对罗丹明B(RhB)的光催化活性最高,可见光照射50 min后,RhB的相对浓度降低98.5%。经过5次循环利用实验,催化剂的光催化活性没有明显下降,说明复合光催化剂的稳定性高。根据自由基捕获实验证明了空穴(h~+)为光催化中起决定性作用的活性物质,结合电化学测试以及UV-Vis DRS表征提出了可能的光催化降解机理。     

Catalytically Promoted NOx Sorption by ZrO2-Based Oxides

Metal promoted zirconia-based oxide sorbents, such as Pt–ZrO₂/Al₂O₃ for NO _x have been investigated. To clarify the role of the catalyst component, sorption of NO and NO₂ was compared using the samples with and without Pt. The catalytic oxidation of NO to NO₂ and successively to nitrate ions is an important role for the Pt catalyst. The experimental results indicate that a high-temperature calcination is essential to remove residual Cl from Pt–ZrO₂–Al₂O₃ prepared from H₂PtCl₆ in order to provide more active NO _x sorption sites. Of M–ZrO₂–Al₂O₃ samples investigated, ruthenium as well as Pt demonstrated relatively good performance as a catalyst component in the sorbent. The FT-IR spectra after sorption of NO and NO₂ demonstrated a strong band attributed to stored nitrate ions. The Pt catalyst was more resistant to sulfur poisoning than a base metal catalyst. However, the NO _x sorptive capacities of the Pt–ZrO₂/Al₂O₃ sorbents were expected to be deteriorated in dilute SO₂ as far as observed from FT-IR spectra.