Efficient multi-frequency generation of ultrashort light pulses using stimulated Raman scattering and optical parametric amplification

Optical parametric amplification of multi-frequency seed pulses generated in a mixture of compressed hydrogen and methane by stimulated Raman scattering of 1 ps, 1 kHz laser pulses at 395.8 nm has been studied. Efficient generation of spectrally narrow ultrashort pulses with a spatial distribution close to the Gaussian profile of the pump beam was obtained in the visible and near infrared ranges.     

Enhanced frequency conversion of nonadiabatic pulses in a double Λ system driven by two pumps with and without carrier beams

We show that nonadiabatic, resonant amplitude- and phase-modulated pulses can be frequency converted with greater efficiency than adiabatic resonant pulses in a double Λ system, interacting with two strong cw beams on one side of the system, and a weak pulsed probe on the other. Indeed, in this double EIT (electromagnetically induced transparency) configuration, conversion efficiencies close to unity, similar to those achieved using highly detuned pulses, can be obtained using highly nonadiabatic resonant pulses. The distance at which the maximum conversion occurs is shorter than in a coherently-prepared Λ system. This counteracts the increased absorption that occurs in the double EIT configuration, so that both produce similar conversion efficiencies. The absorption experienced by matched nonadiabatic pulses in the double EIT system, at all propagation distances, can be overcome by superimposing the nonadiabatic pulses as amplitude modulations on carrier fields. Thus we demonstrate the formation of adiabatons in the double EIT system, and of diabatons in both the coherently-prepared Λ system and the double EIT system. Both the diabatons and adiabatons satisfy pulse-matching conditions. In addition, the asymptotic amplitude of the complementary amplitude modulations is proportional to the ratio of the pump to probe carrier Rabi frequencies, and is the same in each of the configurations.     

Multi-stage pulse compression by use of cascaded quadratic nonlinearity

In this paper, the multi-stage compression of picosecond pulses by cascaded quadratic nonlinearity is studied theoretically, and the dependence of pulse compression on phase-mismatch, laser intensity, and crystal characteristics has been discussed in detail. We demonstrate that the multi-stage pulse compression is much more efficient than the single-stage with a same total crystal length. Pulses as short as ∼150 fs can be generated by compressing 30-ps initial pulses in a two-stage configuration under the realistic crystal and laser conditions, and shorter pulses of ∼30 fs may be obtained by three-stage compression. Pulse compression performances with BiBO and BBO crystals are compared and discussed finally.     

Cascaded compression of the first and second Stokes pulses during forward transient stimulated Raman amplification

The results of numerical modelling of cascaded compression of the first and second Stokes pulses during regenerative regime of the forward transient stimulated Raman amplification are presented for the case when the walk-off length of the first Stokes pulse due to group velocity mismatch is shorter than the length of the nonlinear medium. The influence of the initial amplitudes of the seed first Stokes pulses, its durations and its time delay with respect to the pump pulse, the Kerr nonlinearity of the medium on the conversion efficiency, duration and propagation factor M² of the first and second Stokes pulse are studied. It is demonstrated that for the pump pulse duration of 1 ps the duration of the compressed second Stokes pulses in a KGW crystal near the beam axis may be approximately 14 times shorter than the pump pulse duration. It is shown that the propagation factor of the compressed pulses increases significantly because of complex spatial-temporal dynamics of compression and the influence of Kerr nonlinearity of Raman medium.     

Supercontinuum extending from > 1000 to 250 nm, generated by focusing ten-fs laser pulses at 805 nm into Ar

Ten femtosecond pulses at 805 nm with energy up to 1 mJ were produced by self-phase modulation of 45-fs pulses in Ar at atmospheric pressure and subsequent compression by chirped mirrors. Focusing part of this radiation again into Ar at atmospheric pressure generates a single filament with broadband emission covering the range from > 1000 to 250 nm. This range extends farther into the UV than previously observed with such low energies, overlapping even the region of the third harmonic. Only a small fraction of the power is contained outside the central spot. Using a simple prism compressor, pulses were obtained with durations of 70 fs and energies of 700 nJ in the range 270–290 nm.This revised version was published online in March 2005. The last name of the corresponding author W. Fuß was corrected.     

Self-compression and controllable guidance of multi-millijoule femtosecond laser pulses

Self-compression of multi-millijoule femtosecond laser pulses and dramatic increase of the peak intensity are found in pressurized helium and neon within a range of intensity in which the ionization modification of the material parameters by the pulse is negligible. The pulse propagation is studied by the (3 + 1)-dimensional nonlinear Schrödinger equation including basic lowest order optical processes - diffraction, second order of dispersion, and third order of nonlinearity. Smooth and well controllable pulse propagation dynamics is found. Construction of compressed pulses of controllable parameters at given space target point by a proper chose of the pulse energy and/or gas pressure is predicted.     

Broadband four-wave optical parametric amplification in bulk isotropic media in the ultraviolet

We report on four-wave optical parametric amplification of the ultrashort ultraviolet light pulses in bulk fused silica and CaF₂. Exact phase-matching in these isotropic media is achieved by means of non-collinear interaction with cylindrical beam focusing. Four-wave optical parametric amplifier efficiently operates in the UV spectral range with 1-ps laser pulses, delivering amplified signal energy exceeding 50 μJ using millijoule pump pulses in the visible (527 nm). Results of scanning of the parametric gain profile suggest that broad amplification bandwidth as wide as ∼20 nm (at FWHM) under these experimental settings is achieved, which might support amplification of sub-10-fs ultraviolet pulses with central wavelength around 330 nm. It is also shown experimentally and verified theoretically that the parametric gain profile exposes a distinct inhomogeneity and its bandwidth notably broadens due to effects of self- and cross-phase modulation imposed by the intense pump beam.     

Pulse Temporal Cleaner Based on Nonlinear Ellipse Rotation by Using BK7 Glass Plate

We report a new pulse cleaning technique to enhance the contrast ratio of intense ultra-short laser pulses. A pulse temporal cleaner based on nonlinear ellipse rotation by using BK7 glass plate is developed, and a contrast ratio improvement of two orders of magnitude for the milli-joule level femtoseeond input pulses is demonstrated, the total transmission effieiency of the pulse cleaner is 16. 7%.     

Pulse self-compression in normally dispersive bulk media

We experimentally demonstrate that high-power femtosecond pulses can be compressed during the nonlinear propagation in the normally dispersive solid bulk medium. The self-compression behavior was detailedly investigated under a variety of experimental conditions, and the temporal and spectral characteristics of resulted pulses were found to be significantly affected by the input pulse intensity, with higher intensity corresponding to shorter compressed pulses. By passing through a piece of BK7 glass, a self-compression from 50 to 20 fs was achieved, with a compression factor of about 2.5. However, the output pulse was observed to be split into two peaks when the input intensity is high enough to generate supercontinuum and conical emission.     

THz generation via optical rectification with ultrashort laser pulse focused to a line

We report on efficient THz pulse generation via optical rectification with femtosecond laser pulses focused to a line by a cylindrical lens. This configuration provides phase-matched conditions in the superluminal regime. 35 pJ THz pulses have been generated with this technique in a stoichiometric LiNbO₃ crystal pumped by 2 μJ femtosecond laser pulses at room temperature. An unusual superquadratic rise of the THz pulse energy with the laser pulse energy has been observed at high laser energies. This extraordinary energy dependence of the THz generation efficiency is explained by self-focusing of the laser beam in the crystal. Z-scan measurements and comparison of the THz pulse spectra created with laser pulses having different energies confirm this interpretation.     

Proposal of high quality walk-off compensated sum frequency generation of ultra-short pulses

A multi-crystal and a frequency-selective group-velocity compensating schemes are proposed for the sum frequency-third harmonic generation of low power ultra-short pulses from a Ti:sapphire femtosecond laser. The mechanisms of compensation are analyzed accordingly. It is shown that the temporal walk-off can be effectively compensated without any dispersive element. By use of BBO, calcite crystals together with specially designed composite phase delay plates and dichroic beamsplitters, high quality third harmonic ultra-violet pulses within 300 nm can be generated by the two schemes.     

High-peak power multi-wavelength picosecond pulses generated from a BaWO4 Raman-seeded optical parametric amplifier

We report the generation of high-peak power multi-wavelength picosecond laser pulses using optical parametric amplification (OPA) in BBO seeded with pulses generated in a 5-mm length BaWO₄ crystal by stimulated Raman scattering of 18-ps laser pulses at 532 nm. The maximum output energy of the amplified first-Stokes component at 559.7 nm was about 1.76 mJ. The corresponding maximum peak power, pulse duration and spectral line width were measured to be 117.3 MW, 15 ps and 18.0 cm⁻¹, respectively. The multi-wavelength picosecond laser pulses were in the visible and near infrared ranges. Using this Raman-seeded OPA technique, the beam quality of the stimulated Raman scattering pulses can be improved.     

A 9.5-W 82-MHz-repetition-rate picosecond optical parametric generator with cw diode laser injection seeding

We report on an injection-seeded 9.5-W 82-MHz-repetition-rate picosecond optical parametric generator (OPG) based on a 55 mm long crystal of periodically poled lithium niobate (PPLN) with a quasi-phase-matching (QPM) grating period of 29.75 μm. The OPG is excited by a continuously diode pumped mode-locked picosecond Nd:YVO₄ oscillator-amplifier system. The laser system generates 7 ps pulses with a repetition rate of 82.3 MHz and an average power of 24 W. Without injection-seeding the total average output power of the OPG is 8.9 W, which corresponds to an internal conversion efficiency of 50%. The wavelengths of the signal and idler waves were tuned in the range 1.57–1.64 μm and 3.03–3.3 μm, respectively, by changing the crystal temperature from 150 °C to 250 °C. Injection seeding of the OPG at 1.58 μm with 4 mW of single frequency continuous-wave radiation of a distributed-feedback (DFB) diode laser increases the OPG output to 9.5 W (53% conversion efficiency). The injection seeding increases the pulse duration and reduces the spectral bandwidth. When pumped by 10 W of 1.06 μm laser radiation, the duration of the signal pulses increased from 3.6 ps to 5.5 ps while the spectral bandwidth is reduced from 4.5 nm to 0.85 nm. Seeding thus improved the time-bandwidth product from 1.98 to a value of 0.56, much closer to the Fourier limit. Received: 29 April 2002 / Published online: 8 August 2002     

Conical Emission Patterns by Femtosecond Pulses with Different Spectral Bandwidths

Different conical emission （CE） patterns are obtained experimentally at various incident powers and beam sizes of pump laser pulses with pulse durations of 7fs, 44fs and 100fs. The results show that it is the incident power but not the incident power density that determines a certain CE pattern. In addition, the critical powers for similar CE patterns are nearly the same for the laser pulses with the same spectral bandwidth. Furthermore, as far as a certain CE pattern is concerned, the wider the spectral bandwidth of pump laser pulse is, the higher the critical power is. This will hopefully provide new insights for the generation of CE pattern in optical medium.     

Determination of nonlinear refractive indices by external self-focusing

The nonlinear refractive index of benzene is determined by measuring the reduction of the beam divergence of picosecond ruby laser pulses when passing through a benzene sample. Time-integrated spatial beam profiles give an effective refractive index while time-resolved beam profiles measured with a streak camera allow the determination of the temporal evolution of the nonlinear refractive index.     

Femtosecond third-harmonic generation:. self-phase matching through a transient. Kerr grating and the way to ultrafast computing

The third harmonic of 810-nm 100-fs pulses at 130 μJ is generated very efficiently when ultrashort pulses from two noncollinear beams interfere in an optical medium to create an instantaneous transient grating via the optical Kerr effect. The grating couples two pathways for third-harmonic generation, each taking two photons from one beam and one photon from the other beam, respectively. The coupling enables self-phase matching in the complete process, resulting in a conversion efficiency of ≈3%. Scattering an independent beam at the transient grating confirms a lifetime limited by the pulse duration, with a reaction on the order of one optical cycle. Using the second harmonic of a Ti-sapphire laser at 405 nm, it is shown that the generation of the transient Kerr grating is a general feature, requiring less than 20 μJ/pulse. By introducing a third femtosecond beam we are able to emulate various digital logic units with femtosecond response. Received: 16 October 2001 / Published online: 6 June 2002     

Coherent enhancement of broadband frequency up-conversion in BBO crystal by shaping femtosecond laser pulses

An optimal feedback control of broadband frequency up-conversion in BBO crystal is experimentally demonstrated by shaping femtosecond laser pulses based on genetic algorithm, and the frequency up-conversion efficiency can be enhanced by ∼16%. SPIDER results show that the optimal laser pulses have shorter pulse-width with the little negative chirp than the original pulse with the little positive chirp. By modulating the fundamental spectral phase with periodic square distribution on SLM-256, the frequency up-conversion can be effectively controlled by the factor of about 17%. The experimental results indicate that the broadband frequency up-conversion efficiency is related to both of second harmonic generation (SHG) and sum frequency generation (SFG), where the former depends on the fundamental pulse intensity, and the latter depends on not only the fundamental pulse intensity but also the fundamental pulse spectral phase.     

Period Doubling in a Fabry-Perot Laser Diode Subject to Optical Pulse Injection

Experimental study and numerical simulations of the period doubling of injected optical pulses in Fabry-Perot laser diodes are presented. In our experiments, the period doubling is achieved within a wide input frequency range and the period doubling of the injected optical pulses with 6.32 GHz repetition rate is investigated in detail. The obtained experimental results indicate that period doubling occurs at an appropriate injected optical power level when the bias current of the Fabry-Perot laser diode is located in lower ranges. Moreover, the experimental observed features have been numerically demonstrated by using a coupled rate-equation model. Numerical simulations are consistent with the experimental results.     

SPM-induced spectral compression of picosecond pulses in a single-mode Yb-doped fiber amplifier

In a fiber amplifier, spectral compression due to self-phase modulation is demonstrated for ultrashort pulses. We report the generation of near-transform-limited picosecond pulses with peak powers of several kW at a repetition rate of 74 MHz and diffraction-limited beam quality in a Yb-doped fiber amplifier when seeding with a negative chirped pulse. Received: 17 September 2001 / Revised version: 22 November 2001 / Published online: 17 January 2002