A family of octahedral rhenium cluster complexes [Re6Q8(H2O)n(OH)6-n]n-4 (Q=S, Se; n=0-6): structural and pH-dependent spectroscopic studies

The conversions of hexahydroxo rhenium cluster complexes [Re6Q8(OH)6]4- (Q=S, Se) in aqueous solutions in a wide pH range were investigated by chemical methods and spectroscopic measurements. Dependences of the spectroscopic and excited-state properties of the solutions on pH have been studied in detail. It has been found that a pH decrease of aqueous solutions of the potassium salts K4[Re6Q8(OH)6].8H2O (Q=S, Se) results in the formation of aquahydroxo and hexaaqua cluster complexes with the general formula [Re6Q8(H2O)n(OH)6-n]n-4 that could be considered as a result of the protonation of the terminal OH- ligands in the hexahydroxo complexes. The compounds K2[Re6S8(H2O)2(OH)4].2H2O (1), [Re6S8(H2O)4(OH)2].12H2O (2), [Re6S8(H2O)6][Re6S6Br8].10H2O (3), and [Re6Se8(H2O)4(OH)2] (4) have been isolated and characterized by X-ray single-crystal diffraction and elemental analyses and infrared (IR) spectroscopy. In crystal structures of the aquahydroxo complexes, the cluster units are connected to each other by an extensive system of very strong hydrogen bonds between terminal ligands.     

Conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster: synthesis of [(CH3)C(NH2)(2)](4)[Re(6)Se(8)(CN)(6)] by a solvothermal route

The compound [(CH(3))C(NH(2))(2)](4)[Re(6)Se(8)(CN)(6)] has been synthesized by the reaction at 200 degrees C for 3 days of Re(4)Te(4)(TeCl(2))(4)Cl(8), KSeCN, and NH(4)Cl in superheated acetonitrile. This compound crystallizes in the space group C2/c of the monoclinic system with four formula units in a cell of dimensions a = 20.3113(14) A, b = 10.1332(7) A, c = 19.9981(14) A, beta = 106.754(1) degrees, V = 3941.3(5) A(3) (T = 153 K). The [Re(6)Se(8)(CN)(6)](4-) anion comprises an Re(6) octahedron face capped by mu(3)-Se atoms, with each Re atom liganded by a CN group. The anions and cations are connected by an extensive network of hydrogen bonds. The conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster appears to be unprecedented.     

Expanded Prussian blue analogues incorporating [Re6Se8(CN)6](3-/4-) clusters: adjusting porosity via charge balance

Face-capped octahedral [Re(6)Se(8)(CN)(6)](3-/4-) clusters are used in place of octahedral [M(CN)(6)](3-/4-) complexes for the synthesis of microporous Prussian blue type solids with adjustable porosity. The reaction between [Fe(H(2)O)(6)](3+) and [Re(6)Se(8)(CN)(6)](4-) in aqueous solution yields, upon heating, Fe(4)[Re(6)Se(8)(CN)(6)](3).36H(2)O (4). A single-crystal X-ray analysis confirms the structure of 4 to be a direct expansion of Prussian blue (Fe(4)[Fe(CN)(6)](3).14H(2)O), with [Re(6)Se(8)(CN)(6)](4-) clusters connected through octahedral Fe(3+) ions in a cubic three-dimensional framework. As in Prussian blue, one out of every four hexacyanide units is missing from the structure, creating sizable, water-filled cavities within the neutral framework. Oxidation of (Bu(4)N)(4)[Re(6)Se(8)(CN)(6)] (1) with iodine in methanol produces (Bu(4)N)(3)[Re(6)Se(8)(CN)(6)] (2), which is then metathesized to give the water-soluble salt Na(3)[Re(6)Se(8)(CN)(6)] (3). Reaction of [Co(H(2)O)(6)](2+) or [Ni(H(2)O)(6)](2+) with 3 in aqueous solution affords Co(3)[Re(6)Se(8)(CN)(6)](2).25H(2)O (5) or Ni(3)[Re(6)Se(8)(CN)(6)](2).33H(2)O (6). Powder X-ray diffraction data show these compounds to adopt structures based on the same cubic framework present in 4, but with one out of every three cluster hexacyanide units missing as a consequence of charge balance. In contrast, reaction of [Ga(H(2)O)(6)](3+) with 3 gives Ga[Re(6)Se(8)(CN)(6)].6H(2)O (7), wherein charge balance dictates a fully occupied cubic framework enclosing much smaller cavities. The expanded Prussian blue analogues 4-7 can be fully dehydrated, and retain their crystallinity with extended heating at 250 degrees C. Consistent with the trend in the frequency of framework vacancies, dinitrogen sorption isotherms show porosity to increase along the series of representative compounds 7, Ga(4)[Re(6)Se(8)(CN)(6)](3).38H(2)O, and 6. Furthermore, all of these phases display a significantly higher sorption capacity and surface area than observed in dehydrated Prussian blue. Despite incorporating paramagnetic [Re(6)Se(8)(CN)(6)](3-) clusters, no evidence for magnetic ordering in compound 6 is apparent at temperatures down to 5 K. Reactions related to those employed in preparing compounds 4-6, but carried out at lower pH, produce the isostructural phases H[cis-M(H(2)O)(2)][Re(6)Se(8)(CN)(6)].2H(2)O (M = Fe (8), Co (9), Ni (10)). The crystal structure of 8 reveals a densely packed three-dimensional framework in which [Re(6)Se(8)(CN)(6)](4-) clusters are interlinked through a combination of protons and Fe(3+) ions.     

Structures of 1-(arylseleninyl)naphthalenes: O, G, and Y dependences in 8-G-1-[p-YC6H4Se(O)]C10H6

Structures of 8-G-1-[p-YC6H4Se(O)]C10H6 [1 (G = H), 2 (G = F), 3 (G = Cl), and 4 (G = Br): Y = H, OMe, OCH2Ph, t-Bu, Me, Cl, and NO2] and (1-C10H7)2SeO (5) are investigated by the X-ray crystallographic analysis. Structures of 1 are all A with regard to the naphthyl group (1 (A)), where the Se-C(Ar) and Se-O bonds are perpendicular to and parallel to the naphthyl plane, respectively. Those of 2-4 are also A. Since structures of 8-G-1-(p-YC6H4Se)C10H6 [7 (G = F), 8 (G = Cl), and 9 (G = Br)] are all B, the results exhibit that B of 7-9 change dramatically to A of 2-4 with the introduction of O atoms. The factor to determine the A structures of 1-4 by O is called O dependence. The origin of the O dependence is the nonbonded np(O)- - -pi(Nap) interaction, which results in CT from np(O) to pi(Nap) since O in 1-4 is highly electron rich due to the polar Se+=O- bond and pi(Nap) acts as an acceptor. There are two types of np(O)'s, npy(O) and npz(O), if the directions of the Se-O bond and the p-orbitals of pi(Nap) are taken in the x- and z-axes, respectively. Double but independent np(O)- - -pi(Nap) interactions in 5 lead to 5 (AA). The conformation of the p-YC6H4Se group in 1 changes depending on Y (Y dependence), although the effect is not strong. The Y dependence is explained on the basis of the magnitude of CT of the np(O)-->pi(Ar) type in 1, in addition to the np(O)- - -pi(Nap) interaction. The structure around the Se=O group in 1 is close to that of 5 (AA), if the accepting ability of the p-YC6H4Se group is similar to that of the naphthyl group. A of 2-4 are further stabilized by the np(G)- - -sigma(Se-O) 3c-4e interactions, which are called G dependence. QC calculations performed on the methyl analogues of 1-4 (11-14, respectively) reproduced the observed structures, supported the above discussion, and revealed the energy profiles. The energy-lowering effect of the O dependence would be close to the G dependence of the nonbonded n(Br)- - -sigma(Se-O) 3c-4e interaction in 14 if the steric repulsion between Br and Se is contained in the G dependence. The value is roughly predicted as 20 kJ mol(-1). The structures of 1-5 are well explained by O, G, and Y dependences.     

CRYSTAL STRUCTURE OF [Cu(NH3)2]2[{Cu(NH3)}2{Cu(NH3)(OH)}Re6Se8(CN)6]

Journal of Structural Chemistry - Chain coordination polymer [Cu(NH3)2]2[{Cu(NH3)}2{Cu(NH3)(OH)}Re6Se8(CN)6] (1) is obtained by a reaction of Cs2.75K1.25[Re6Se8(CN)4(OH)2]·H2O with CuCN in the...     

Determination of 77Se-77Se and 77Se-13C J-coupling parameters for the clusters [Re5OsSe8(CN)6]3- and [Re4Os2Se8(CN)6]2-

We have investigated rarely observed 77Se J-couplings (spin-spin couplings) in the mixed-metal face-capped octahedral clusters [Re5OsSe8(CN)6]3- and [Re4Os2Se8(CN)6]2- at natural abundance. To the best of our knowledge, these are the first observations of Se-Se spin-spin interactions between mu3-Se sites, important for stereochemical assignments in hexarhenium analogues, Chevrel phase materials, and similar cluster materials. NMR techniques such as COSY, INADEQUATE, and 2D J-resolved spectroscopy have been used in conjunction to study these interactions. The two isomers (cis and trans) of [Re4Os2Se8(CN)6]2- were distinguishable, and selective isotopic labeling of [Re5OsSe8(CN)6]3- with 13CN ligands enabled resonances to be assigned by observing the 2J (Se-M-C) couplings. For [Re5OsSe8(CN)6]3-, two different 2J (Se-M-Se) couplings were measurable on a single cluster, and these are related to one another through spin-spin interactions across a face diagonal or along an edge of the cube of inner selenium ligands. A rigorous analysis based on combinatorial math has been invoked to assign the couplings on the basis of the probability of multiple-spin interactions. The face diagonal association is found to result in a J-coupling interaction larger in magnitude than that from coupling along an edge of the cube-information critical for making stereochemical assignments of selenium sites.     

Site-differentiated hexanuclear rhenium(III) cyanide clusters [Re(6)Se(8)(PEt(3))(n)()(CN)(6)(-)(n)()](n)()(-)(4) (n = 4, 5) and kinetics of solvate ligand exchange on the cubic [Re(6)Se(8)](2+) Core

The site-differentiated, cyanide-substituted hexanuclear rhenium(III) selenide clusters cis- and trans-[Re(6)Se(8)(PEt(3))(4)(CN)(2)] and [Re(6)Se(8)(PEt(3))(5)(CN)](+) have been prepared from heterogeneous reactions of the corresponding iodo clusters with AgCN in refluxing chloroform. Isolated yields are 68%, 46%, and 64% for cis-[Re(6)Se(8)(PEt(3))(4)(CN)(2)], trans-[Re(6)Se(8)(PEt(3))(4)(CN)(2)], and [Re(6)Se(8)(PEt(3))(5)(CN)](+), respectively. The new compounds are air- and water-stable and are characterized by X-ray diffraction crystallography, (31)P NMR and IR spectroscopies, and FAB mass spectrometry. In related work, the solvent exchange rates of two site-differentiated monosolvate clusters, [Re(6)Se(8)(PEt(3))(5)(MeCN)](SbF(6))(2) and [Re(6)Se(8)(PEt(3))(5)(Me(2)SO)](SbF(6))(2), in neat solvents were measured by (1)H NMR. These clusters are substitutionally inert; k approximately 10(-)(5)-10(-)(6) s(-)(1) at 318 K. Activation parameters indicate a dissociative ligand exchange mechanism; DeltaH() values obtained from least-squares fitting of temperature-dependent kinetics data exceed RT by a factor of ca. 50 over the temperature range studied. These results demonstrate that the substitutional lability encountered in a previous study of cluster photophysics (Gray, T. G.; Rudzinski, C. M.; Nocera, D. G.; Holm, R. H. Inorg. Chem. 1999, 38, 5932) cannot result from ground-state thermal reactions.     

Structural, electrochemical and oxygen atom transfer properties of a molybdenum selenoether complex [Mo2O4(OC3H6SeC3H6O)2] and its thioether analogue [Mo2O4(OC3H6SC3H6O)2

The first crystallographically characterized molybdenum(vi) selenoether complex [Mo(2)O(4)(OC(3)H(6)SeC(3)H(6)O)(2)] and its thioether analogue [Mo(2)O(4)(OC(3)H(6)SC(3)H(6)O)(2)] were synthesised. Their structural, electrochemical and oxygen atom transfer properties are compared. This is relevant for the molybdenum cofactors of the DMSO reductase family where the coordination of the active site metal occurs through O (serine/aspartate), S (cysteine) or Se (selenocysteine). Both structures are almost identical except for those parameters that are directly derived from the different sizes of the varied ligand atoms (Se and S). No trans influence was observed. The metal centered redox process (Mo(V)<-->Mo(VI)) is at slightly lower voltage for the sulfur than for the selenium complex. The selenium compound catalyses the oxygen atom transfer from DMSO to PPh(3) by a different mechanism and at a higher rate than the sulfur compound, which is an indication that cysteine and selenocysteine might be used for a purpose in the different molybdenum and tungsten cofactors.     

Preparation and properties of the full series of cuboidal clusters [Mo(x)W4-xSe4(H2O)12]n+ (n = 4-6) and their derivatives

Hydrothermal reactions between incomplete cuboidal cluster aqua complexes [M3Q4(H2O)9]4+ and M(CO)6 (M = Mo, W; Q = S, Se) offer easy access to the corresponding cuboidal clusters M4Q4. The complete series of homometal and mixed Mo/W clusters [Mo(x)W4-xQ4(H2O)12]n+ (x = 0-4, n = 4-6) has been prepared. Upon oxidation of the mixed-metal clusters, it is the W atom which is lost, allowing selective preparation of new trinuclear clusters [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+. The aqua complexes were converted by ligand exchange reactions into dithiophosphato and thiocyanato complexes, and crystal structures of [W4S4((EtO)2PS2)6], [MoW3S4((EtO)2PS2)6], [Mo4Se4((EtO)2PS2)6], [W4Se4((i-PrO)2PS2)6], and (NH4)6[W4Se4(NCS)12]-4H20 were determined. Cyclic voltammetry was performed on [Mo(x)W4-xCO4(H2O)12]n+, showing reversible redox waves 6+/5+ and 5+/4+. The lower oxidation states are more difficult to access as the number of W atoms increases. The [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+ species were derivatized into [Mo2WSe4(acac)3(py)3]+ and [MoW2Se4(acac)3(py)3]+, which were also studied by CV. When appropriate, the products were also characterized by FAB-MS and NMR (31P, 1H) data.     

Concerning the photophysical properties of Re2(4+) and Re2(6+) carboxylate compounds

The preparation and structure of Re(2)(dppm)(2)(O(2)CC(6)H(4)-p-NO(2))(2)Cl(2), where dppm = Ph(2)PCH(2)PPh(2), is reported together with its photophysical properties (absorption, steady state emission, fs- and ns-transient absorption spectroscopy) and electrochemistry. These data are compared with photophysical studies on the previously reported Re(2)(dppm)(2)(O(2)CCH(3))(2)Cl(2). The preparation of the complex Re(2)(O(2)CC(6)H(4)-p-NO(2))(4)Cl(2) is also reported together with its photophysical properties which allows for a comparison of the electronic structures and photophysical states of Re(2)(4+) and Re(2)(6+) containing complexes having MM configurations σ(2)π(4)δ(2)δ(*2) and σ(2)π(4)δ(2), respectively. An interesting comparison is also made with the related MM quadruply bonded complexes of molybdenum and tungsten.     

Synthesis and structure of nickel-containing cuboidal clusters derived from [W3Se4(H2O)9]4+. Site-differentiated substitution at the nickel site in the series [W3NiQ4(H2O)10]4+ (Q = S, Se)

New Ni-containing heterometallic cuboidal cluster aqua complex [W3(NiCl)Se4(H2O)9]3+, the missing link in the family of the M3NiQ4 clusters (M = Mo, W; Q = S, Se), has been prepared by the reaction of [W3Se4(H2O)9]4+ with Ni in 2 M HCl. Single crystals of edge-linked double-cuboidal cluster [{W3NiSe4(H2O)9}2](pts)8.18H2O (pts = p-toluenesulfonate) were grown from the solution of the aqua complex in 3 M Hpts, and their structures were determined. The Ni site in the clusters [W3(NiCl)Q4(H2O)9]3+ selectively coordinates typical pi-acceptor ligands such as CO, olefins, acetylenes, phosphines, arsines, or SnCl3-. This allows stabilization by coordination of such elusive species as HP(OH)2 and As(OH)3. The stability constants for coordination of HP(OH)2, As(OH)3, and SnCl3- were determined. The Se for S substitution increases the stability by 1-2 orders of magnitude. Supramolecular adducts with cucurbit[6]uril (Cuc), [W3(Ni(HP(OH)2))Q4(H2O)9]Cl4.Cuc.11H2O and [W3(NiAs(OH)3)S4(H2O)8Cl]Cl3.Cuc.13H2O, were isolated and structurally characterized.     

配位聚合物{[Co(H2O)6][Co(H2O)4(pmts)]·4H2O}n的合成及晶体结构

以均苯四甲酸(pmts)和CoCl2·6H2O为原料,在碱件水溶液中通过水热法合成了配位聚合物{[Co(H2O)6][Co(H2O)4(pmts)]·4H2O}n,并对其进行了红外、紫外-可见吸收光谱和单品X-射线衍射结构测定.结果表明,Co2+分别与桥配体pmts的1,4位羧基氧及端配体水分子中的氧以轻度畸变的八血体...     

Cluster-to-metal magnetic coupling: synthesis and characterization of 25-electron [Re6-nOsnSe8(CN)6](5-n)-(n = 1, 2) clusters and (Re6-nOsnSe8[CNCu(Me6tren)]6)9+(n = 0, 1, 2) assemblies

The first face-capped octahedral clusters with 25 metal-based valence electrons are shown to provide versatile building units capable of engaging in magnetic exchange coupling. Reactions of [Re(5)OsSe(8)Cl(6)](3-) and [Re(4)Os(2)Se(8)Cl(6)](2-) with NaCN in a melt of NaNO(3) or KCF(3)SO(3) afford the 24-electron clusters [Re(5)OsSe(8)(CN)(6)](3-) and [Re(4)Os(2)Se(8)(CN)(6)](2-). The 13C NMR spectrum of a 13C-labeled version of the latter species indicates a 1:2 mixture of cis and trans isomers. Cyclic voltammograms of the clusters in acetonitrile display reversible [Re(5)OsSe(8)(CN)(6)](3-/4-), cis-[Re(4)Os(2)Se(8)(CN)(6)](2-/3-), and trans-[Re(4)Os(2)Se(8)(CN)(6)](2-/3-) couples at E(1/2) = -1.843, -0.760, and -1.031 V vs FeCp(2)(0/+), respectively, in addition to other redox processes. Accordingly, reduction of [Re(5)OsSe(8)(CN)(6)](3-) with sodium amalgam and [Re(4)Os(2)Se(8)(CN)(6)](2-) with cobaltocene produces the 25-electron clusters [Re(5)OsSe(8)(CN)(6)](4-) and [Re(4)Os(2)Se(8)(CN)(6)](3-). EPR spectra of these S = 1/2 species in frozen DMF solutions exhibit isotropic signals with g = 1.46 for the monoosmium cluster and g = 1.74 and 1.09 for the respective cis and trans isomers of the diosmium cluster. In each case, results from DFT calculations show the unpaired spin to delocalize to some extent into the pi* orbitals of the cyanide ligands, suggesting the possibility of magnetic superexchange. Reaction of [Re(5)OsSe(8)(CN)(6)](3-) with [Ni(H(2)O)(6)](2+) in aqueous solution generates the porous Prussian blue analogue Ni(3)[Re(5)OsSe(8)(CN)(6)](2).32H(2)O; however, the tendency of the 25-electron clusters to oxidize in water prohibits their use in reactions of this type. Instead, a series of cyano-bridged assemblies, [Re(6-n)Os(n)Se(8)[CNCu(Me(6)tren)](6)](9+) (n = 0, 1, 2; Me(6)tren = tris(2-(dimethylamino)ethyl)amine), were synthesized to permit comparison of the exchange coupling abilities of clusters with 23-25 electrons. As expected, the results of magnetic susceptibility measurements show no evidence for exchange coupling in the assemblies containing the 23- and 24-electron clusters, but reveal the presence of weak ferromagnetic coupling in [Re(4)Os(2)Se(8)[CNCu(Me(6)tren)](6)](9+). Assuming all cluster-Cu(II) exchange interactions to be equivalent, the data were fit to give an estimated coupling strength of J = 0.4 cm(-1). To our knowledge, the ability of such clusters to participate in magnetic exchange coupling has never previously been demonstrated.     

(EDT-TTF-CONH2)6[Re6Se8(CN)6], a metallic Kagome-type organic-inorganic hybrid compound: electronic instability, molecular motion, and charge localization

(EDT-TTF-CONH2)6[Re6Se8(CN)6], space group R, was prepared by electrocrystallization from the primary amide-functionalized ethylenedithiotetrathiafulvalene, EDT-TTF-CONH2 (E(1/2)1 = 0.49 V vs SCE in CH3CN), and the molecular cluster tetraanion, [Re6Se8(CN)6]4- (E(1/2) = 0.33 V vs SCE in CH3CN), equipped with hydrogen bond donor and hydrogen bond acceptor functionalities, respectively. Its Kagome topology is unprecedented for any TTF-based materials. The metallic state observed at room temperature has a strong two-dimensional character, in coherence with the Kagome lattice symmetry, and the presence of minute amounts of [Re6Se8(CN)6](3-)* identified by electron spin spectroscopy. A structural instability toward a distorted form of the Kagome topology of lesser symmetry is observed at ca. 180 K. The low-temperature structure is associated with a localized, electrically insulating electronic ground state and its magnetic susceptibility accounted for by a model of uniform chains of localized S = 1/2 spins in agreement with the 100 K triclinic crystal structure and band structure calculations. A sliding motion, within one out of the three (EDT-TTF-CONH2)2 dimers coupled to the [Re6Se8(CN6)(3-)*]/[Re6Se8(CN6)4-] proportion at any temperature, and the electronic ground state of the organic-inorganic hybrid material are analyzed on the basis of ESR, dc conductivity, 1H spin-lattice relaxation, and static susceptibility data which qualify a Mott localization in [EDT-TTF-CONH2]6[Re6Se8(CN)6]. The coupling between the metal-insulator transition and a structural transition allows for the lifting of a degeneracy due to the ternary axis in the high temperature, strongly correlated metallic phase which, in turn, leads to Heisenberg chains at low temperature.     

New dirhenium(III) compounds bridged by carboxylate ligands: N(C(4)H(9))(4)[Re(2)(OOCCF(3))Cl(6)] and Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2)

The solvothermal reaction of (N(C(4)H(9))(4))(2)[Re(2)Cl(8)] with trifluoroacetic acid and acetic anhydride leads to the new rhenium trifluoroacetate dimer N(C(4)H(9))(4)[Re(2)(OOCCF(3))Cl(6)] (1) and to the rhenium carbonyl dimer Re(2)(mu(2)-Cl)(2)(CO)(8) as the rhenium-reduced byproduct. The reaction of the precursor complex, N(C(4)H(9))(4)[Re(2)(OOCCF(3))Cl(6)] (1), with the organometallic carboxylic acid (CO)(6)Co(2)HCCCOOH leads to the cluster of clusters compound Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2) (2), which has the dimer structure of Re(2)(OOCR)(4)Cl(2). Cyclic voltammetric measurements show that Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2) (2) has one reduction centered on the dirhenium core and a reduction centered on the cobalt atoms. DFT calculations have been used to rationalize the observed displacements of the voltammetric signals in Re(2)(OOCCCHCo(2)(CO)(6))(4)Cl(2) (2) compared to the parent ligand (CO)(6)Co(2)HCCCOOH and rhenium pivalate.     

Zn7{(2-C5H4N)CH(OH)PO3}6 (H2O)6]SO4 x 4H2O: a zinc phosphonate cluster with a drum-like cage structure

Direct reaction of hydroxy(2-pyridyl)methylphosphonic acid with zinc sulfate under hydrothermal conditions results in the formation of the novel heptanuclear cluster compound [Zn7{(2-C5H4N)CH(OH)PO3}6 (H2O)6]SO4 x 4H2O (1). The inorganic core of the cluster can be described as a cylindrical drum made up of six Zn atoms bridged by six {CPO3} units that is centered by a seventh Zn atom. Crystal data: monoclinic, C2/c, a = 22.690(2) A, b = 16.675(2) A, c = 18.151(2) A, beta = 93.390(2) degrees.     

Preparation,structures, and redox and emission characteristics of the isothiocyanate complexes of hexarhenium(III) clusters [Re6(mu3-E)8(NCS)6]4- (E = S,Se)

Hexarhenium(III) complexes with terminal isothiocyanate ligands, [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)(NCS)(6)] (1) and (L)(4)[Re(6)(mu(3)-Se)(8)(NCS)(6)] (L(+) = PPN(+) (2a), (n-C(4)H(9))(4)N(+) (2b)), have been prepared by three different methods. Complex 1 was prepared by the reaction of [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)Cl(6)] with molten KSCN at 200 degrees C, while 2b was obtained by refluxing the chlorobenzene-DMF (2:1 v/v) solution of [Re(6)(mu(3)-Se)(8)(CH(3)CN)(6)](SbF(6))(2) and [(n-C(4)H(9))(4)N]SCN. The [Re(6)(mu(3)-Se)(8)(NCS)(6)](4)(-) anion was also obtained from a mixture of Cs(2)[Re(6)(mu(3)-Se)(8)Br(4)] and KSCN in C(2)H(5)OH by a mechanochemical activation at room temperature for 20 h and isolated as 2a. The X-ray structures of 1 and 2a.4DMF have been determined (1, C(70)H(144)N(10)S(14)Re(6), monoclinic, space group P2(1)/n (No. 14), a = 14.464(7) A, b = 22.059(6) A, c = 16.642(8) A, beta = 113.62(3) degrees, V = 4864(3) A(3), Z = 2; 2a.4DMF, C(162)H(144)N(14)O(4)P(8)S(6)Se(8)Re(6), triclinic, space group P1 (No. 2), a = 15.263(2) A, b = 16.429(2) A, c = 17.111(3) A, alpha = 84.07(1) degrees, beta = 84.95(1) degrees, gamma = 74.21(1) degrees, V = 4098.3(8) A(3), Z = 1). All the NCS(-) ligands in both complexes are coordinated to the metal center via nitrogen site with the Re-N distances in the range of 2.07-2.13 A. The redox potentials of the reversible Re(III)(6)/Re(III)(5)Re(IV) process in acetonitrile are +0.84 and +0.70 V vs. Ag/AgCl for [Re(6)(mu(3)-S)(8)(NCS)(6)](4)(-) and [Re(6)(mu(3)-Se)(8)(NCS)(6)](4)(-), respectively, which are the most positive among the known hexarhenium complexes with six terminal anionic ligands. The complexes show strong red luminescence with the emission maxima (lambda(max)/nm), lifetimes (tau(em)/micros), and quantum yields (phi(em)) being 745 and 715, 10.4 and 11.8, and 0.091 and 0.15 for 1 and 2b, respectively, in acetonitrile. The data reasonably well fit in the energy-gap plots of other hexarhenium(III) complexes. The temperature dependence of the emission spectra and tau(em) of 1 and [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)Cl(6)] are also reported.     

SYNTHESIS AND CRYSTAL STRUCTURES OF IONIC CLUSTER COMPLEXES [Cu2(en)2(μ-CN)][{Cu(en)}3Re6Q8(CN)6]·en·H2O (Q = S,Se)

Journal of Structural Chemistry - Two new compounds of the composition [Cu2(en)2(μ-CN)][{Cu(en)}3Re6Q8(CN)6]·en·H2O (Q&nbsp;=&nbsp;S, Se) are synthesized under solvothermal...     

Crystal structures and 77Se NMR spectra of molybdenum(IV) areneselenolates having intramolecular NH...Se hydrogen bonds

Salts of the monooxomolybdenum(IV,V) areneselenolates having intramolecular NH...Se hydrogen bonds, [Mo(IV)O(Se-2-RCONHC6H4)4]2- (R = t-Bu, CH3, CF3) and [Mo(V)O(Se-2-t-BuCONHC6H4)4]-, were synthesized and characterized by 1H nuclear magnetic resonance (NMR), 77Se NMR, electron spin resonance (ESR), UV-visible spectra, X-ray analysis, and electrochemical measurements. 77Se-1H correlated spectroscopy (COSY) indicated a significant correlation between amide 1H and selenolate 77Se atoms through an NH...Se hydrogen bond with 1J(77Se-1H) = 5.4 Hz coupling. The hydrogen bonds contribute to the positive shift in the Mo(V)/Mo(IV) redox potential. In the crystal structure of (PPh4)2[Mo(IV)O(Se-2-CH3CONHC6H4)4], an NH...O=Mo hydrogen bond was found. Ab inito calculations support the presence of intramolecular NH...O=Mo and NH...Se hydrogen bonds.     

Reactions of the dirhenium(II) complex Re2Cl4(mu-dppm)2 with pyridinecarboxylic acids. Examples of bidentate O,O versus N,O coordination and tridentate O,N,O coordination and structural isomers that contain the pyridine-2,6-dicarboxylate ligand

Pyridine-2-carboxylic acid, pyridine-2,3-dicarboxylic acid, and pyridine-2,4-dicarboxylic acid or their [(Ph(3)P)(2)N](+) salts react with the triply bonded dirhenium(II) complex Re(2)Cl(4)(mu-dppm)(2) (dppm = Ph(2)PCH(2)PPh(2)) in refluxing ethanol to afford unsymmetrical substitution products of the type Re(2)(eta(2)-N,O)Cl(3)(mu-dppm)(2), where N,O represents a chelating pyridine-2-carboxylate ligand (N,O = O(2)C-2-C(5)H(4)N (1), O(2)C-2-C(5)H(3)N(-3-CO(2)Et) (3), or O(2)C-2-C(5)H(3)N(-4-CO(2)H) (4)). The carboxylate groups in the 3- and 4- positions are not bound to the metal centers; in the case of 3 this group undergoes esterification in the refluxing ethanol solvent. Structure determinations have shown that 1, 3, and 4 possess similar structures in which there is an axial Re-O (carboxylate) bond (collinear with the Re(triple bond)Re bond) and the mu-dppm ligands are bound in a trans,cis fashion to the two Re atoms which have the ligand atom arrangement [P(2)NOClReReCl(2)P(2)]. The tridentate dianionic pyridine-2,6-dicarboxylate ligand (dipic) reacts with Re(2)Cl(4)(mu-dppm)(2) in ethanol at room temperature to give a compound Re(2)(dipic)Cl(2)(mu-dppm)(2) (6) in which the dipic ligand is bound in a symmetrical eta(3)-(O,N,O) fashion to one Re atom, with the N atom in an axial position (collinear with the Re(triple bond)Re bond) and with preservation of the same trans,trans coordination of the mu-dppm ligands that is present in Re(2)Cl(4)(mu-dppm)(2). Under reflux conditions, this kinetic product isomerizes to the thermodynamically favored isomer 5 with an unsymmetrical structure in which the dipic ligand chelates to one Re atom (as in 1, 3, and 4) and uses its other carboxylate group to bridge to the second Re atom. The isomerization of 6 to 5, which also results in a change in the coordination of the pair of mu-dppm ligand to trans,cis, is believed to occur by a partial "merry-go-round" process, a mechanism that probably explains the structures of the thermodynamic products 1, 3, and 4. The reaction of Re(2)Cl(4)(mu-dppm)(2) with pyridine-3-carboxylate gives the trans isomer of Re(2)(mu:eta(2)-O(2)C-3-C(5)H(4)N)(2)Cl(2)(mu-dppm)(2) (2) in which a pair of carboxylate bridges are present and the pyridine N atom is not coordinated. Single-crystal X-ray structural details are reported for 1-6.