六芳基二咪唑类化合物的合成及光致变色性能

六芳基咪唑;六芳基二咪唑类化合物的合成及光致变色性能     

六水合硝酸钆(Ⅲ)的晶体结构

文献已报道六水合硝酸镧的晶体结构,配位数为11,并认为六水合硝酸铈与其共结构;六水合硝酸镨、钕、钆的晶体结构为[RE(H_2O)_4(NO_3)_3]·2H_2O(RE=Pr,Nd,Y),配位数是10.而重镧系硝酸盐水合物的结构未见文献报道.本文报道六水合硝酸钆的晶体结构.实验部分     

六苄基六氦杂异伍兹烷五种氢解脱苄化合物的合成及工业制备

综述了六苄基六氮杂异伍兹烷（HBIW）五种氢解脱苄化合物的合成条件和工业制备工艺。这五种化合物是：四乙酰基二苄基六氮杂异伍兹烷（TADBIW）、四乙酰基二甲酰基六氮杂异伍兹烷（TADFIW）、四乙酰基六氮杂异伍兹烷（TAIW）、四乙酰基二乙基六氮杂异伍兹烷（TADEIW）和六乙酰基六氮杂异伍兹烷（HAIW）。其中的TADBIW系由HBIW经一次氢解合成，其它四种都系由HBIW经两次氢解合成。HBIW的这五种氢解脱苄化合物均可经硝解合成六硝基六氮杂异伍兹烷（HNIW）。另外，本文总结了HBIW及其五种氢解脱苄产物的红外、核磁和质谱数据及它们的基本性能参数。     

反相微乳法合成稀土六铝酸盐催化剂及其表征

反相微乳法合成稀土六铝酸盐催化剂及其表征;反相微乳法;甲烷;六铝酸盐;过渡金属;稀土     

La、Ba离子对高温燃烧催化剂六铝酸盐结构和性质的影响

La、Ba离子对高温燃烧催化剂六铝酸盐结构和性质的影响;甲烷高温燃烧催化剂;六铝酸盐;La离子;Ba离子     

一种无计有机聚合物中间体——六(甲基丙烯酸羟乙酯)三聚膦腈的合成

六氯三聚膦腈;一种无计有机聚合物中间体——六(甲基丙烯酸羟乙酯)三聚膦腈的合成     

纳米三氧化钨的制备、表征及对六硝基六氮杂异伍兹烷热分解的影响

采用水热法通过控制前躯体钨酸钠的加入量和反应时间制备了长方体形纳米WO₃,利用X射线粉末衍射(XRD)、透射电镜(TEM)、扫描电镜及能量散射光谱仪(SEM-EDS)对样品进行表征。并运用差示扫描量热法(DSC)研究纳米WO₃对六硝基六氮杂异伍兹烷(CL-20)热分解特性的影响。结果表明:与单组分CL-20相比,纳米WO₃的加入使复合物WO₃/CL-20的热分解峰温降低2.95℃,活化能减小7.74 kJ·mol^-1,因此纳米WO₃能够加速CL-20的热分解。     

纳米三氧化钨的制备、表征及对六硝基六氮杂异伍兹烷热分解的影响

采用水热法通过控制前躯体钨酸钠的加入量和反应时间制备了长方体形纳米WO₃,利用X射线粉末衍射(XRD)、透射电镜(TEM)、扫描电镜及能量散射光谱仪(SEM-EDS)对样品进行表征。并运用差示扫描量热法(DSC)研究纳米WO₃对六硝基六氮杂异伍兹烷(CL-20)热分解特性的影响。结果表明:与单组分CL-20相比,纳米WO₃的加入使复合物WO₃/CL-20的热分解峰温降低2.95℃,活化能减小7.74 kJ·mol^-1,因此纳米WO₃能够加速CL-20的热分解。     

ε-六硝基六氮杂异伍兹烷(CL-20)热解机理的理论研究

运用量子化学中非限制性Hartree-Fock自洽场(UHF-SCF) PM3分子轨道(MO)方法, 计算研究六硝基六氮杂异伍兹烷(HNIW或CL-20)的最稳定ε晶型化合物的气相热解引发反应. 求得可能的四种不同热解反应通道的过渡态、活化能和位能曲线, 发现其热解引发步骤为五元环上侧链N—NO₂键的均裂. 在过渡态附近相关原子电荷发生突变.     

六羰基金属在沸石上的热分解研究

本文对六羰基金属化合物M(CO)_6(M=Cr、Mo、W)在Y型沸石上的热分解进行了程序升温分解质谱和原位红外光谱的研究,并初步讨论了这些六羰基金属在不同碱金属交换沸石上的不同行为,发现M(CO)_6在沸石上热分解能形成相对稳定的中间体“M(CO)_3”。六羰基化合物开始分解的温度以Mo为最低:MoMo>Cr。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.