Material properties of matrix lipids determine the conformation and intermolecular reactivity of diacetylenic phosphatidylcholine in the lipid bilayer

Photopolymerizable phospholipid DC(8,9)PC (1,2-bis-(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) exhibits unique assembly characteristics in the lipid bilayer. Because of the presence of the diacetylene groups, DC(8,9)PC undergoes polymerization upon UV (254 nm) exposure and assumes chromogenic properties. DC(8,9)PC photopolymerization in gel-phase matrix lipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monitored by UV-vis absorption spectroscopy occurred within 2 min after UV treatment, whereas no spectral shifts were observed when DC(8,9)PC was incorporated into liquid-phase matrix 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC). Liquid chromatography-tandem mass spectrometry analysis showed a decrease in the amount of DC(8,9)PC monomer in both DPPC and POPC environments without any change in the matrix lipids in UV-treated samples. Molecular dynamics (MD) simulations of DPPC/DC(8,9)PC and POPC/DC(8,9)PC bilayers indicate that the DC(8,9)PC molecules adjust to the thickness of the matrix lipid bilayer. Furthermore, the motions of DC(8,9)PC in the gel-phase bilayer are more restricted than in the fluid bilayer. The restricted motional flexibility of DC(8,9)PC (in the gel phase) enables the reactive diacetylenes in individual molecules to align and undergo polymerization, whereas the unrestricted motions in the fluid bilayer restrict polymerization because of the lack of appropriate alignment of the DC(8,9)PC fatty acyl chains. Fluorescence microscopy data indicates the homogeneous distribution of lipid probe 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-lissamine rhodamine B sulfonyl ammonium salt (N-Rh-PE) in POPC/DC(8,9)PC monolayers but domain formation in DPPC/DC(8,9)PC monolayers. These results show that the DC(8,9)PC molecules cluster and assume the preferred conformation in the gel-phase matrix for the UV-triggered polymerization reaction.     

Vesicle and bilayer formation of diphytanoylphosphatidylcholine (DPhPC) and diphytanoylphosphatidylethanolamine (DPhPE) mixtures and their bilayers' electrical stability

Lipid bilayers are of interest in applications where a cell membrane mimicking environment is desired. The performance of the lipid bilayer is largely dependent on the physical and chemical properties of the component lipids. Lipid bilayers consisting of phytanoyl lipids have proven to be appropriate choices since they exhibit high mechanical and chemical stability. In addition, such bilayers have high electrical resistances. Two different phytanoyl lipids, 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) and 1,2-diphytanoyl-sn-glycero-3-phosphoethanolamine (DPhPE), and various combinations of the two have been investigated with respect to their behavior in aqueous solutions, their interactions with solid surfaces, and their electrical stability. Dynamic light scattering, nuclear magnetic resonance diffusion, and cryogenic transmission electron microscopy measurements showed that pure DPhPC as well as mixtures of DPhPC and DPhPE consisting of greater than 50% (mol%) DPhPC formed unilamellar vesicles. If the total lipid concentration was greater than 0.15g/l, then the vesicles formed solid-supported bilayers on plasma-treated gold and silica surfaces by the process of spontaneous vesicle adsorption and rupture, as determined by quartz crystal microbalance with dissipation monitoring and atomic force microscopy. The solid-supported bilayers exhibited a high degree of viscoelasticity, probably an effect of relatively high amounts of imbibed water or incomplete vesicle fusion. Lipid compositions consisting of greater than 50% DPhPE formed small flower-like vesicular structures along with discrete liquid crystalline structures, as evidenced by cryogenic transmission electron microscopy. Furthermore, electrophysiology measurements were performed on bilayers using the tip-dip methodology and the bilayers' capacity to retain its electrical resistance towards an applied potential across the bilayer was evaluated as a function of lipid composition. It was shown that the lipid ratio significantly affected the bilayer's electrical stability, with pure DPhPE having the highest stability followed by 3DPhPC:7DPhPE and 7DPhPC:3DPhPE in decreasing order. The bilayer consisting of 5DPhPC:5DPhPE had the lowest stability towards the applied electrical potential.     

Phosphonate lipid tubules II

We describe a new chiral tubule-forming lipid in which the C-O-P phosphoryl linkage of the archetypal tubule-forming molecule, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine, "DC(8,9)PC", is replaced by a C-P linkage. Tubule formation with this phosphonate analogue proceeds under the same mild conditions as with DC(8,9)PC and produces similar yields, but synchrotron small-angle X-ray scattering, atomic force microscopy, and optical microscopy show the new tubules to have diameters 1.94 times as great, to be significantly shorter, and to be thinner-walled. A significant portion of the enantiomerically pure chiral phosphonate precipitate is in the form of stable open helices, and these helices are divided almost evenly between left- and right-handed members.     

Interfacial approach to polyaromatic hydrocarbon toxicity: phosphoglyceride and cholesterol monolayer response to phenantrene, anthracene, pyrene, chrysene, and benzo[a]pyrene

Interactions of phenantrene, anthracene, pyrene, chrysene, and benzo[a]pyrene (polyaromatic hydrocarbons) with model phospholipid membranes were probed using the Langmuir technique. The lipid monolayers were prepared using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine, 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol, 1,2-dipalmitoyl-sn-glycero-3-phosphoserine, 1,2-myristoyl-sn-glycero-3-phosphoethanolamine, 1,2-dilauroyl-sn-glycero-3-phosphocholine, and cholesterol. Surface pressure and electrical surface potential were measured on mixed phospholipid/PAH monolayers spread on a pure water subphase. The morphology of the mixed monolayers was followed with Brewster angle microscopy. Polarization-modulation infrared reflection-absorption spectroscopy spectra obtained on DPPE/benzo[a]pyrene showed that the latter interacts with the carbonyl groups of the phospholipid. On the other hand, the activity of phospholipase A2 toward DLPC used as a probe to locate benzo[a]pyrene in the monolayers indicates that the polyaromatic hydrocarbons are not accessible to the enzyme. The results obtained show that all PAHs studied affect the properties of the pure lipid, albeit in different ways. The most notable effects, namely, film fluidization and morphology changes, were observed with benzo[a]pyrene. In contrast, the complexity of mixed lipid monolayers makes the effect of PAHs difficult to detect. It can be assumed that the differences observed between PAHs in monolayers correlate with their toxicity.     

A23187-mediated Cd uptake by highly stable, polymerized metal-sorbing vesicles

Vesicles formed from the polymerizable phospholipid, 1,2-diacyl-sn-glycero-3-(N-2(methacryloyloxy)ethyl)-phosphocholine, and the crosslinker, 1,2-dihydroxyethylene-bis-acrylamide, exhibit significantly enhanced stability relative to egg phosphatidylcholine (PC) vesicles. As evidenced by absorbance measurements, methacrylate PC vesicles with a 1 : 75 crosslinker-to-lipid molar ratio retain their integrity in up to 20% (v/v) ethanol as opposed to <10% (v/v) for egg PC vesicles. These crosslinked-polymerized vesicles also remain impermeable to Cd²⁺ (in the absence of ionophore) for up to 15 mM octyl glucoside. Furthermore, the crosslinked-polymerized vesicles show enhanced stability under osmotic stress. These inprovements in vesicle robustness are attained without dramatic loss in A23187-mediated Cd²⁺ permeability. The initial Cd²⁺ permeability of crosslinked-polymerized (1 : 75 crosslinker-to-lipid molar ratio) and egg PC vesicles, with A23187 as ionophore, measured 6.0 × 10⁻⁵ and 9.8 × 10⁻⁵ cm s⁻¹, respectively.     

Liposome electrokinetic capillary chromatography in the study of analyte-phospholipid membrane interactions. Application to pesticides and related compounds

Interactions between low-molar mass analytes and phospholipid membranes were studied by liposome electrokinetic capillary chromatography (LEKC). The analytes were pesticides, some degradation products, and compounds associated with the manufacture of pesticides. Negatively charged liposome dispersions with different zwitterionic lipids (PC) were applied to the determination of retention factors (k) of 15 charged and uncharged compounds. The liposome dispersions consisted of 80:20 mol% of 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/POPS, and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/POPS. Retention factors were calculated from the effective electrophoretic mobilities of the analytes under LEKC and CZE conditions and from the effective electrophoretic mobilities of the liposomes, determined by CZE with a polyacrylamide-coated capillary. Determining the liposome mobilities in this way proved to be a good alternative to the conventional method employing a liposome marker compound. The log k values of the analytes for the different liposome dispersed phases were correlated with one another. In addition, correlation curves were determined between log k and calculated octanol-water partition coefficients. The results showed that the zwitterionic phospholipid in the liposome has a major impact on the interactions between the tested compounds and the lipid membranes.     

Thermally responsive phospholipid preparations for fluid steering and separation in microfluidics

Aqueous phospholipid preparations comprised of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC) are prevalent materials for biological characterization and become gel-like near physiological temperature, but have a low viscosity below 24°C. The rheology of 20% phospholipid preparations of [DMPC]/[DHPC] = 2.5 reveals that, under conditions utilized for fluid steering, the materials are shear-thinning power-law fluids with a power-law index ranging from 0.30 through 0.90. Phospholipid preparations are utilized to steer fluids in microfluidic chips and support hydrodynamic delivery of sample across a double T injection region in a chip. The fact that the phospholipids are fully integrated as a valving material as well as a separation medium is demonstrated through the separation of linear oligosaccharides labeled with 1-aminopyrene-3,6,8-trisulfonic acid.     

Comparison of liposomes formed by sonication and extrusion: rotational and translational diffusion of an embedded chromophore

We report on the physical and optical characterization of liposomes formed by extrusion and sonication, two widely used methods for vesicle preparation. We also address the issue of whether the properties of bilayers formed from liposomes prepared by the two techniques differ at the molecular and mesoscopic levels. We used the phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), with and without cholesterol, to form liposomes, incorporating 1-oleoyl-2-[12-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]dodecanoyl]-sn-glycero-3-phosphocholine (18:1-12:0 NBD-PC) as an optical probe of dynamics. We measured the physical morphology of liposomes by transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the rotational and translational diffusion of 18:1-12:0 NBD-PC by time correlated single photon counting (TCSPC) and fluorescence recovery after pattern photobleaching (FRAPP), respectively. We find that, despite apparent differences in average size and size distribution, both methods of preparation produced liposomes that exhibit the same molecular scale environment. The translational diffusion behavior of the tethered chromophore in planar bilayer lipid membranes formed from the two types of liposomes also yielded similar results.     

Interactions of a fungistatic antibiotic, griseofulvin, with phospholipid monolayers used as models of biological membranes

Griseofulvin (GF) is an oral antibiotic for widely occurring superficial mycosis in man and animals caused by dermaphyte fungi; it is also used in agriculture as a fungicide. The mechanism of the biological activity of GF is poorly understood. Here, the interactions of griseofulvin with lipid membranes were studied using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC), and 1,2-myristoyl-sn-glycero-3-phosphoethanolamine (DMPE) monolayers spread at the air/water interface. Surface pressure (Pi), electric surface potential (Delta V), grazing incidence X-ray diffraction (GIXD), and Brewster angle microscopy (BAM) were used for studying pure phospholipid monolayers spread on GF aqueous solutions, as well as mixed phospholipid/GF monolayers spread on pure water subphase. Moreover, phospholipase A2 (PLA2) activity toward DLPC monolayers and molecular modeling of the GF surface and lipophilic properties were used to get more insight into the mechanisms of GF-membrane interactions. The results obtained show that GF has a meaningful impact on the film properties; we propose that nonpolar interactions are by and large responsible for GF retention in the monolayers. The modification of membrane properties can be detected using both physicochemical and enzymatic methods. The results obtained may be relevant for elaborating GF preparations with increased bioavailability.     

Design of liposomes containing photopolymerizable phospholipids for triggered release of contents

We describe a novel class of light-triggerable liposomes prepared from a photo-polymerizable phospholipid DC_8,9PC (1,2-bis (tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) and DPPC (1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine). Exposure to UV (254 nm) radiation for 0–45 min at 25 °C resulted in photo-polymerization of DC_8,9PC in these liposomes and the release of an encapsulated fluorescent dye (calcein). Kinetics and extents of calcein release correlated with mol% of DC_8,9PC in the liposomes. Photopolymerization and calcein release occurred only from DPPC/DC_8,9PC but not from Egg PC/DC_8,9PC liposomes. Our data indicate that phase separation and packing of polymerizable lipids in the liposome bilayer are major determinants of photo-activation and triggered contents release.     

Micellar aggregates formed following the addition of hexafluoroisopropanol to phospholipid membranes

The addition of 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) to aqueous phospholipid membranes leads to perturbation of the bilayer. In the case of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), calorimetric and small-angle X-ray scattering analyses indicate that effects are already apparent at bound molar HFIP/lipid ratios of less than 1:150, with a pronounced decrease in the temperature of the main (gel to liquid crystalline) phase transition and a decrease in the intensity of the first- and second-order scattering reflections. As the HFIP concentration is raised further, at bound molar HFIP/lipid ratios >2:1, uniform isotropic particulate structures are formed with higher intrinsic curvature than the parent liposomes. These observations are supported by the results of thin-film experiments and are consistent with the formation of DMPC/HFIP adducts that are detergent-like in nature. In the case of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) the effects are much less marked, with no blebbing observed over a comparable range of HFIP concentrations. Although HFIP interacts strongly with DOPC membranes, it appears that membrane rupture is not promoted as readily with this lipid. Data from electron microscopy, laser correlation spectroscopy, and marker release experiments suggest that some of the immediate (nonequilibrium) effects of HFIP on membranes are the consequence of microinhomogeneity in water/HFIP mixtures. On the basis of our observations, we propose a model for the interaction of HFIP with phospholipid membranes.     

Reorganization and caging of DPPC, DPPE, DPPG, and DPPS monolayers caused by dimethylsulfoxide observed using Brewster angle microscopy

The interaction between dimethylsulfoxide (DMSO) and phospholipid monolayers with different polar headgroups was studied using "in situ" Brewster angle microscopy (BAM) coupled to a Langmuir trough. For a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayer, DMSO was shown to significantly impact the structure of the liquid expanded (LE) and gaseous phases. The domains reorganized to much larger domain structures. Domains in the liquid condensed (LC) phase were formed on the DMSO-containing subphase at the mean molecular area where only gaseous and LE phases were previously observed on the pure water subphase. These results clearly demonstrate the condensing and caging effect of DMSO molecules on the DPPC monolayer. Similar effects were found on dipalmitoyl phosphatidyl ethanolamine, glycerol, and serine phospholipids, indicating that the condensing and caging effect is not dependent upon the phospholipid headgroup structure. The DMSO-induced condensing and caging effect is the molecular mechanism that may account for the enhanced permeability of membranes upon exposure to DMSO.     

Stabilization of phospholipid multilayers at the air-water interface by compression beyond the collapse: a BAM, PM-IRRAS, and molecular dynamics study

Compression beyond the collapse of phospholipid monolayers on a modified Langmuir trough has revealed the formation of stable multilayers at the air-water interface. Those systems are relevant new models for studying the properties of biological membranes and for understanding the nature of interactions between membranes and peptides or proteins. The collapse of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-di[cis-9-octadecenoyl]-sn-glycero-3-[phospho-l-serine] (DOPS), 1,2-di[cis-9-octadecenoyl]-sn-glycero-3-phosphocholine (DOPC), and 1,2-di[cis-9-octadecenoyl]-sn-glycero-3-[phospho-1-rac-glycerol] (DOPG) monolayers has been investigated by isotherm measurements, Brewster angle microscopy (BAM), and polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS). In the cases of DMPC and DOPS, the collapse of the monolayers revealed the formation of bilayer and trilayer structures, respectively. The DMPC bilayer stability has been analyzed also by a molecular dynamics study. The collapse of the DOPC and DOPG systems shows a different behavior, and the Brewster angle microscopy reveals the formation of luminous bundles, which can be interpreted as diving multilayers in the subphase.     

Analysis of Amphiphilic Lipids and Hydrophobic Proteins Using Nonresonant Femtosecond Laser Vaporization with Electrospray Post-Ionization

Amphiphilic lipids and hydrophobic proteins are vaporized at atmospheric pressure using nonresonant 70 femtosecond (fs) laser pulses followed by electrospray post-ionization prior to being transferred into a time-of-flight mass spectrometer for mass analysis. Measurements of molecules on metal and transparent dielectric surfaces indicate that vaporization occurs through a nonthermal mechanism. The molecules analyzed include the lipids 1-monooleoyl-rac-glycerol, 1,2-dihexanoyl-sn-glycero-3-phosphocholine, 1,2-dimyristoyl-sn-glycero-3-phosphocholine, and the hydrophobic proteins gramicidin A, B, and C. Vaporization of lipids from blood and milk are also presented to demonstrate that lipids in complex systems can be transferred intact into the gas phase for mass analysis.     

Surface thermodynamic properties of monolayers versus reconstitution of a membrane protein in solid-supported bilayers

Atomic force microscopy (AFM) was used to study the influence of a membrane protein, lactose permease of Escherichia coli (LacY), on the surface spreading behavior and the features of self-assembled phospholipids bilayers on mica. The miscibility of phospholipids used, 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), was investigated by surface pressure area isotherm measurements at the air-water interface. A composition with an equimolar proportion of POPC and DMPC was used to form the liposomes. Surface layers formed with DMPC:POPC (0.5:0.5, mol/mol) or LacY reconstituted in proteoliposomes with the same phospholipid composition were imaged by using AFM. When lactose permease was reconstituted in DMPC:POPC (0.5:0.5, mol/mol), self-assembled structures that remained firmly adsorbed onto the mica surface were observed. These sheets had an irregular shape and their upper layer was more corrugated than that obtained for the phospholipid matrix.     

AFM studies of solid-supported lipid bilayers formed at a Au(111) electrode surface using vesicle fusion and a combination of Langmuir-Blodgett and Langmuir-Schaefer techniques

Atomic force microscopy (AFM) has been used to characterize the formation of a phospholipid bilayer composed of 1,2-dimyristyl-sn-glycero-3-phosphocholine (DMPC) at a Au(111) electrode surface. The bilayer was formed by one of two methods: fusion of lamellar vesicles or by the combination of Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) deposition. Results indicate that phospholipid vesicles rapidly adsorb and fuse to form a film at the electrode surface. The resulting film undergoes a very slow structural transformation until a characteristic corrugated phase is formed. Force-distance curve measurements reveal that the thickness of the corrugated phase is consistent with the thickness of a bilayer lipid membrane. The formation of the corrugated phase may be explained by considering the elastic properties of the film and taking into account spontaneous curvature induced by the asymmetric environment of the bilayer, in which one side faces the gold substrate and the other side faces the solution. The effect of temperature and electrode potential on the stability of the corrugated phase has also been described.     

Formation of substrate-supported membranes from mixtures of long- and short-chain phospholipids

We studied the formation of substrate-supported planar phospholipid bilayers (SPBs) on glass and silica from mixtures of long- and short-chain phospholipids to assess the effects of detergent additives on SPB formation. 1,2-Hexyanoyl-sn-glycero-3-phosphocholine (DHPC-C6) and 1,2-heptanoyl-sn-glycero-3-phosphocholine (DHPC-C7) were chosen as short-chain phospholipids. 1-Palmitoyl-2-oleol-sn-glycero-3-phosphocholine (POPC) was used as a model long-chain phospholipid. Kinetic studies by quartz crystal microbalance with dissipation monitoring (QCM-D) showed that the presence of short-chain phospholipids significantly accelerated the formation of SPBs. Rapid rinsing with a buffer solution did not change the adsorbed mass on the surface if POPC/DHPC-C6 mixtures were used below the critical micelle concentration (cmc) of DHPC-C6, indicating that an SPB composed of POPC molecules remained on the surface. Fluorescence microscopy observation showed homogeneous SPBs, and the fluorescence recovery after photobleaching (FRAP) measurements gave a diffusion coefficient comparable to that for SPBs formed from POPC vesicles. However, mixtures of POPC/DHPC-C7 resulted in a smaller mass of lipid adsorption on the substrate. FRAP measurements also yielded significantly smaller diffusion coefficients, suggesting the presence of defects. The different behaviors for DHPC-C6 and DHPC-C7 point to the dual roles of detergents to enhance the formation of SPBs and to destabilize them, depending on their structures and aggregation properties.     

Effects of lipid chain unsaturation and headgroup type on molecular interactions between paclitaxel and phospholipid within model biomembrane

Molecular interactions between paclitaxel, an anticancer drug, and phospholipids of various chain unsaturations and headgroup types were investigated in the present study by Langmuir film balance and differential scanning calorimetry. Both the lipid monolayer at the air-water interface and the lipid bilayer vesicles (liposomes) were employed as model cell membranes. It was found that, regardless of the difference in molecular structure of the lipid chains and headgroup, the drug can form nonideal, miscible systems with the lipids at the air-water interface over a wide range of paclitaxel mole fractions. The interaction between paclitaxel and phospholipid within the monolayer was dependent on the molecular area of the lipids at the interface and can be explained by intermolecular forces or geometric accommodation. Paclitaxel is more likely to form thermodynamically stable systems with 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) and 1,2-dielaidoyl-sn-glycero-3-phosphocholine (DEPC) than with 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). Investigation of the drug penetration into the lipid monolayer showed that DPPC and DEPC have higher incorporation abilities for the drug than DPPE and DSPC. A similar trend was also evidenced by DSC investigation with liposomes. While little change of DSC profiles was observed for the DPPE/paclitaxel and DSPC/paclitaxel liposomes, paclitaxel caused noticeable changes in the thermographs of DPPC and DEPC liposomes. Paclitaxel was found to cause broadening of the main phase transition without significant change in the peak melting temperature of the DPPC bilayers, which demonstrates that paclitaxel was localized in the outer hydrophobic cooperative zone of the bilayer, i.e., in the region of the C1-C8 carbon atoms of the acyl chain or binding at the polar headgroup site of the lipids. However, it may penetrate into the deeper hydrophobic zone of the DEPC bilayers. These findings provide useful information for liposomal formulation of anticancer drugs as well as for understanding drug-cell membrane interactions.     

Dynamic assessment of bilayer thickness by varying phospholipid and hydraphile synthetic channel chain lengths

A library of "hydraphile" synthetic ion channel analogues that differ in overall length from approximately 28-58 A has been prepared. A new and convenient ion-selective electrode (ISE) method was used to assay Na(+) release. Liposomes were formed from three different phospholipids: 1,2-dimyristoleoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), and 1,2-dierucoyl-sn-glycero-3-phosphocholine (DEPC). The acyl chains of the lipids comprise cis-unsaturated 14:1, 18:1, or 22:1 residues, respectively. Sodium release was measured for each liposome system with each of the synthetic channels. Peak activity was observed for shorter channels in liposomes formed from DMPC and for longer channels in DEPC. A separate study was then conducted in DMPC liposomes in the presence of the putative membrane-thickening agents cholesterol and decane. Peak activity was clearly shifted to longer channel lengths upon addition of 20 or 40 mol % cholesterol or n-decane to the liposome preparation.     

Electrostatic contributions to indole-lipid interactions

The role of electrostatic forces in indole-lipid interactions was studied by (1)H and (2)H NMR in ether- and ester-linked phospholipid bilayers with incorporated indole. Indole-ring-current-induced (1)H NMR chemical shifts of lipid resonances in bilayers of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, 1,2-dioleoyl-sn-glycero-3-phosphocholine, 1,2-di-O-octadecenyl-sn-glycero-3-phosphocholine, and 1,2-di-O-octadecenyl-sn-glycero-3-phosphomethanol show a bimodal indole distribution, with indole residing at the upper hydrocarbon chain/glycerol region of the lipid and near the choline group, when present. (2)H NMR of indole-d(7)-incorporated lipid bilayers reveals that the former site is occupied by about two-thirds of the indole, which adopts a distinct preferred orientation with respect to the bilayer normal. The results suggest that the upper hydrocarbon chain/glycerol location is dictated by many factors, including interactions with the electric charges and dipoles, van der Waals interactions, entropic contributions, and hydrogen bonding. Indole diffusion rates are higher in lipids with ester bonds and lower in choline-containing lipids, suggesting that interactions between indole and carbonyl groups are of minor importance for lipid-indole association and that cation-pi interactions with choline drive the second indole location. Nuclear Overhauser effect spectroscopy cross-relaxation rates suggest a 30-ns lifetime for indole-lipid associations. These results may have important implications for sidedness and structural transitions in tryptophan-rich membrane proteins.