2-Mercapto-benzimidazole as an analytical reagent

Summary Palladium is quantitatively precipitated at aPH 5.0 to 10.1 by 2-mercapto-benzimidazole and the complex, Pd(C₇H₅N₂S)₂, which is found to be diamagnetic, is stable up to a temperature of 447 C. In presence of EDTA and tartrate or citrate and at aPH between 6 and 8, it is separated from alkalis, alkaline earths, Mg, Fe³⁺, Cr, Th, Zr, Ti, UO₂ ²⁺, Be, Ce³⁺, Ce⁴⁺, rare earths, Zn, Mn, Ni, Co, Pb, Bi, As, Sb³⁺, Sn⁴⁺, Tl⁺, Cu²⁺, Cd, Ir⁴⁺, Rh³⁺, Ru³⁺, Os⁴⁺, CrO₄ ^2–, MoO₄ ^2–, WO₄ ^2–, VO₃ ^–, PO₄ ^3– and AsO₄ ^3–. Pb, Ag and Hg²⁺ are kept in solution by potassium iodide while a small amount of Au³⁺ by thiosulphate. The palladium complex is either weighed after drying at 110 C or dissolved in a cyanide solution and determined volumetrically by back titrating the excess cyanide with a standard silver nitrate solution.     

Bismuthiol II as an analytical reagent

Summary The reagent Bismuthiol II completely precipitates palladium at a maximum acidity of 0.3 N in nitric acid, 0.5 N in hydrochloric acid or 1 N in sulphuric acid and also at a maximum p_H of about 8.0. The palladium complex Pd (C₈H₅N₂S₃)₂ is stable even up to a temperature of about 250° C. From a mineral acid solution palladium can be estimated in presence of ions of Fe²⁺, Al, Cr, Th, Ce³⁺, Zr, Ti⁴⁺, UO₂ ²⁺, Be, Mn, Co, Ni, Mg, P0₄ ^3–, AsO₄ ^3–, rare earths, alkalis, alkaline earths, Ce⁴⁺, WO₄ ^2– and MoO₄ ^2– that are not ordinarily precipitated by the reagent. At a p_H of 4.75 to 8.2, EDTA, Na-salt, keeps in solution, besides the above ions, the ions of Tl+, Cu²⁺, Pb, Bi³⁺, As³⁺, Sb³⁺, Zn, Cd, Fe³⁺, CrO₄ ^2–, AsO₃ ^3– and VO₃ ^–. Tartrate, however, at a p_H 6.2–8, keeps all the ions including Sn⁴⁺ in solution except of course Tl⁺, Cu²⁺, Pb and Cd. Separation from Ce⁴⁺, WO₄ ^2–, MoO₄ ^2– and AsO₄ ^3– at a low p_H require the presence of tartrate. Ag⁺, Hg²⁺ and also Pb may be complexed with potassium iodide at a p_H 6–8. Tl⁺ and Ag⁺ may also be separated in presence of cyanide in an acetate buffer when palladium remains in solution and from which it may be re-precipitated by acidification.Part II see Z. analyt. Chem. 154, 413 (1957).     

Bismuthiol I as an analytical reagent

Summary Bismuth and palladium have been determined volumetrically after precipitation as bismuthiol I complexes. From 0.1 N hydrochloric acid solutions they are separated from Fe²⁺, Al, Cr, Ce³⁺, Zr, Ti, Zn, Th, UO₂ ²⁺, Be, Mg, Mn, Co, Ni, alkalis, alkaline and rare earths.A mixture of tartrate or citrate and EDTA has been found to be useful for the separation of palladium at a p_H 3.5–8.5 from As, Zn, Bi, Sn⁴⁺, Sb, Fe³⁺, Tl⁺, Cu²⁺, Cd, Pb, Ru³⁺, Os⁴⁺, PO₄ ^3–, Ce⁴⁺, Ir⁴⁺, Rh³⁺, VO₃ ^–, CrO₄ ^2–, AsO₄ ^3–, WO₄ ^2–, MoO₄ ^2– and from all the other ions referred to above. Potassium iodide at p_H 6.0–8.0 and thiosulphate at 6–7 keep Ag, Pb, Hg²⁺ and Au³⁺, Ir⁴⁺, Os⁴⁺ respectively in solution and thus allow a selective precipitation of palladium.Hg²⁺, Pb, Cu²⁺, Ag, Tl⁺, Cd and Pd when present along with bismuth are first removed by the reagent and from the filtrate bismuth is estimated. Sn²⁺, Sb³⁺, Fe³⁺, F^–, VO₃ ^–, PO₄ ^3–, AsO₄ ^3– and CrO₄ ^2– interfere in bismuth determination while only Sn²⁺, Pt⁴⁺ and CN^– interfere in palladium estimation.     

Spectrophotometric determination of thorium(IV) using 3-nitroso-4-hydroxycoumarin

Summary 3-Nitroso-4-hydroxycoumarin is suggested as a new reagent for the spectrophotometric determination of 125 g to 0.50 mg Th(IV) in 3: 1 dioxan: water medium as 1: 1 complex having orange red colour with absorption maximum at 419 nm, at pH 4.5–6.0. For the estimation of9.6 ppm Th(IV) 100-folds acetate, citrate, tartrate; 50 ppm UO₂ ²⁺, 75 ppm Ce³⁺, La³⁺, Gd³⁺; 4.5 ppm Ce⁴⁺; 25 ppm Tm³⁺, Zr⁴⁺; and 100 ppm Ti⁴⁺, V⁵⁺, MoO₄ ^2– and WO₄ ^2– do not interfere.

---

Zusammenfassung 3-Nitroso-4-hydroxycoumarin wird als neues Reagens für die spektrophotometrische Bestimmung von 125 g bis 0,50 mg Th(IV) in Dioxan: Wasser = 3: 1 als 1: 1-Komplex mit orange-roter Farbe mit einem Absorptionsmaximum bei 419 nm bei pH 4,5–6,0 empfohlen. Bei einem Einsatz von 9,6 ppm Th(IV) stört die hundertfache Menge Acetat, Citrat, Tartrat nicht. Auch 50 ppm UO₂ ²⁺, 75 ppm Ce³⁺, La³⁺, Gd³⁺, 4,5 ppm Ce⁴⁺, 25 ppm Tm³⁺, Zr⁴⁺, 100 ppm Ti⁴⁺, V⁵⁺, MoO₄ ^2– bzw. WO₄ ^2– stören nicht.

     

Bismuthiol II as an analytical reagent

Summary Lead was estimated as Bismuthiol II complex of composition (C₈H₅N₂S₃)₂Pb by precipitating it from its chloride or nitrate solution in presence of a mineral acid, acetic acid, tartrate or cyanide. The estimation is quantitative up to a maximumph of about 6.5. The lead-Bismuthiol II complex is stable up to about 311° C and the conversion factor is 0.315. The method affords a complete separation of lead from alkalis and alkaline earths, Be²⁺, Mg²⁺, Zn²⁺, Mn²⁺, Co²⁺, Ni²⁺, Fe²⁺, Fe³⁺, Cr³⁺, Al³⁺, rare earths, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺, Pd²⁺, As³⁺, Sb³⁺, Cl^–, SO₄ ^2–, PO₄ ^3–, AsO₄ ^3–, MoO₄ ^2– and WO₄ ^2–. Among the sulphide group members Ag⁺, Au³⁺, Hg⁺, Hg²⁺, Tl⁺, Tl³⁺, Cd²⁺ and platinum metals, except Pd²⁺, interfere while oxidising agents decompose the excess reagent. Bi³⁺, Cu²⁺ and Sn²⁺, do not interfere up to a maximum limit of 30 mg, 50 mg, and 250 mg respectively.Part I: see Z. analyt. Chem. 154, 262 (1957).     

Bis-salicylaldehyde-ethylenediamine as an analytical reagent

Summary Copper has been determined gravimetrically as its bis-salicylaldehyde-ethylenediamine complex of the composition C₁₆H₁₄O₂N₂ · Cu, dried at 100–120° C. The complex is completely precipitated in theph range of 10.5–13.5, adjusted with ammonia or caustic alkali. It is stable in presence of excess ammonia, 0.1 N alkali, ammonium salts and complexing agents as tartrate, citrate, sodium-thiosulphate, fluoride, thiourea, triethanolamine and EDTA. In presence of tartrate and ammonia the ions of alkali metals, alkaline earths, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ and anions as VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3–, AsO₄ ^3– do not interfere. Ni²⁺ and Hg²⁺ are masked by tartrate, EDTA and ammonia; As³⁺, Sb³⁺ and Sn²⁺ are separated using fluoride as the complexing agent; at an alkalinity of 0.1 N caustic alkali in presence of tartrate As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ and Fe³⁺ are separated. Fe³⁺ can also be separated using triethanolamine as the masking agent at aph of about 13.0. Copper can be separated from almost all the ions, thus affording a highly selective method for the determination of copper.

---

Zusammenfassung Es wird eine gravimetrische Methode zur Bestimmung von Kupfer beschrieben, die auf der Bildung des Bis-salicylaldehyd-äthylendiaminkomplexes beruht. Dieser hat die Zusammensetzung C₁₆H₁₄O₂N₂ · Cu. Die Fällung wird imph-Bereich 10,5–13,5 (mit Ammoniak oder Alkalilauge eingestellt) vorgenommen und der Niederschlag bei 100°–120° C getrocknet. Der Komplex ist beständig in Gegenwart von überschüssigem Ammoniak, 0,1 n Alkali, Ammoniumsalzen sowie Tartrat, Citrat, Natriumthiosulfat, Fluorid, Thioharnstoff, Triäthanolamin und ÄDTA. In Gegenwart von Tartrat und Ammoniak stören nicht: Alkalien, Erdalkalien, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ sowie VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3– und AsO₄ ³⁺. Ni²⁺ und Hg²⁺ können mit Tartrat, ÄDTA und Ammoniak maskiert werden, As³⁺, Sb³⁺ und Sn²⁺ mit Fluorid. In 0,1 n ätzalkalischer Lösung in Gegenwart von Tartrat können As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ und Fe³⁺ abgetrennt werden. Fe³⁺ kann ebenfalls mit Triäthanolamin beiph 13,0 maskiert werden. Das beschriebene Verfahren erlaubt somit eine Abtrennung des Kupfers von fast allen anderen Ionen.

---

---

Part I: Singh, B. R., and S. Kumar: Z. analyt. Chem. 185, 211 (1962).     

Separation of cerium and europium by extraction with tributyl phosphate and di(2-ethylhexyl)phosphoric acid in n-alkane from nitrate solutions

The following extraction systems have been studied: (Ce³⁺+Eu³⁺) (NO₃)-(EDTA, DCTA, DTPA)/TBP in n-alkane and (Ce³⁺+Eu³⁺)(NO₃)/DEHPA in n-alkane at concentration ratios as follows: [Ce³⁺]=trace –1 mol·dm^–3, [Eu³⁺]=trace –0.1 mol·dm^–3. [TBP]=(0.183–1.83) mol·dm^–3, [DEHPA]=(5·10^–3–0.1) mol·dm^–3, [(H, Na)NO₃]=(0.1–6) mol·dm^–3, [Eu³⁺]: [EDTA, DCTA, DTPA]=11–110. The initial concentration of Eu³⁺ in aqueous phase in the extraction system containing a mixture of Ce³⁺ and Eu³⁺ was trace, 1% and 10% compared with the Ce³⁺ concentration. The distribution of the elements between the phases was observed radiometrically using¹⁴¹Ce,¹⁵²Eu and¹⁵⁴Eu. The results are documented by the distribution ratios D_Ce, D_Eu and separation factor =D_Eu/D_Ce as functions of variable parameters of the systems.     

Organic azo-dyes in quantitative analysis

Summary Eliamina blue FFL is used as indicator in the complexometric titration of thorium in the p_H range 2.5–3.5. The end-point is sensitive, sharp and obvious. Solutions containing from 20 g to 20 mg thorium — in the nitrate form — per 10 ml aliquot can be easily titrated. Fe³⁺, Zr, Cu²⁺, Ni and Al interfere while Sb⁵⁺, Sn⁴⁺, As⁵⁺, Ce⁴⁺, U⁶⁺, Ca, Pb, Cd Na, K, Co, Mn²⁺ and Cr⁶⁺ do not.     

Bismuthiol II as an analytical reagent

Summary The estimation of bismuth by the reagent Bismuthiol II is studied critically. The effect of acidity, reagent concentration and interfering ions are given in detail. The maximum acidity that may be tolerated for the complete precipitation of bismuth is 0.3 N in nitric acid, 0.5 N in hydrochloric acid and 1N in sulphuric acid. Higher acidity than 0.1 N decomposes the reagent present in excess. In 0.1 N nitric acid bismuth has been separated from a number of ions like Al³⁺, Cr³⁺, Th⁴⁺, rare earths, Zr⁴⁺, Ti⁴⁺, UO₂ ²⁺, Be²⁺, Mn²⁺, Co²⁺, Ni²⁺, Mg, alkalis and alkaline earths, SO₄ ^2–, Cl^–, C₂O₄ ^2–- and from Fe²⁺ and Ce³⁺ in 0.1 N hydrochloric acid. In presence of a citrate or a tartrate it can be separated from As³⁺, Ce⁴⁺, MoO₄ ^2–- and WO₄ ^2–-at p_H 1.5 to 2.5. When Hg²⁺, Pb²⁺, Pd²⁺, Cd²⁺, Cu²⁺, Ag⁺ and Tl⁺ are present they are first precipitated by the reagent at p_H 6 to 8 in presence of a citrate or a tratrate and the bismuth is estimated gravimetrically in the acidified filtrate. Ions as F^– and PO₄ ^3– that form insoluble compounds with bismuth, Sb³⁺ and Sn²⁺ that form less soluble compounds with the reagent and Fe³⁺, VO₃ ^–, CrO₄ ^2–, AsO₄ ^3– that act as oxidising agents, interfere.     

Chemie der Seltenerdmetalle, 22. Mitt.*

Zusammenfassung Auf Grund der Löslichkeit des Ce(III)-Malonats in Perchlorsäurelösungen wurden die Dissoziationsgleichgewichte der gebildeten Komplexionen, d. h., von [CeMal ₂]^– und [CeMal]⁺ untersucht. Gleichzeitig wurden auch die Löslichkeitsprodukte des Ce(III)-Malonats, u. zw.: [Ce³⁺]² [Mal ^2–]^3**, [CeMal ⁺]² [Mal ^2–] und [CeMal ⁺] [CeMal _2–] bestimmt.

---

Chemistry of the rare earth metals, XXII: Dissociation equilibria of Ce(III)-malonate in weakly acidic solution

The solubility of cerous malonate in perchloric acid solutions was investigated. The dissociation equilibria of the complex ions formed, i.e. [CeMal ₂]^– and [CeMal]⁺ were studied and the solubility products of the cerous malonates, i.e. [Ce³⁺]² [Mal ^2–]³, [CeMal ⁺]² [Mal ^2–] and [CeMal ⁺] [CeMal _2–] determined.

---

---

21. Mitt.:R. Pastorek, Gleichgewichtskonstanten der Komplex-partikeln im sauren Bereich des SystemsLn ³⁺–H₄ Tart–KOH, Acta Univ. Palack., im Druck.     

Nicotinamidoxime as an analytical reagent

Summary Alkaline solutions of nicotinamidoxime containing traces of nickel(II) give a deep blue color on treatment with iodine. At a p_H of 10.5–11.5 in presence of an excess of the amidoxime the color develops almost instantaneously and is stable for at least 24 hrs. The system adheres to Beer's law in the range of 0.3–10 ppm of nickel, and the optimum range for measurement (1 cm cell) is 3–10 ppm of the metal. The color reaction is highly sensitive (spectrophotometric: 0.014 g Ni cm^–2 at 575 nm identification limit: 0.5 g Ni ml^–1; 12 · 10⁶).All the common anions are without any effect excepting CN^– and EDTA which interfere seriously. Interference of Pb²⁺, Bi³⁺, Al³⁺, Ti⁴⁺, Zr⁴⁺ and Th⁴⁺ can be masked by excess tartrate; while in the presence of Cu²⁺, Co²⁺, Zn²⁺, Mn²⁺ and Fe³⁺, the Ni²⁺ is first separated by the anion exchange method of Kraus and Moore ³ and then determined as usual.From the results of polarographic investigations it has been concluded that in alkaline medium nicotinamidoxime is first oxidized possibly to an azo type of compound which interacts with nickel(II) forming the deep blue color.Part II: K. K. Tripathi and D. Banarjea: Z. analyt. Chem. 168, 407 (1959).     

TSL and EPR studies of SrBPO5 doped with CeO2and co-doped with CeO2 and Sm2O3

Thermally stimulated luminescence (TSL) and electron paramagnetic resonance (EPR) investigations were carried out on gamma irradiated SrBPO₅ samples doped with CeO₂ and co-doped with CeO₂ and Sm₂O₃. On gamma-irradiation at room temperature, BO₃ ^2–, O₂ ^– and O^– radicals were produced. It was seen that the O^– radical ion disappeared in the sample annealed at 500 K. It is proposed that the recombination between trapped electrons and O^– radical ions results in transfer of recombination energy to the impurity centre Ce³⁺ resulting in TSL glow peak at 485 K. In the case of co-doped samples energy transfer occurs between Ce³⁺ to Sm³⁺ resulting in increase in the intensity of glow peak at 485 K.The authors are grateful to Dr. V. K. Manchanda, Head, Radiochemistry Division, BARC for his keen interest and encouragement during the course of this work.     

TSL and EPR studies of SrBPO5 doped with CeO2 and co-doped with CeO2 and Sm2O3

Thermally stimulated luminescence (TSL) and electron paramagnetic resonance (EPR) investigations were carried out on gamma irradiated SrBPO₅ samples doped with CeO₂ and co-doped with CeO₂ and Sm₂O₃. On gamma-irradiation at room temperature, BO₃ ^2–, O₂ ^– and O^– radicals were produced. It was seen that the O^– radical ion disappeared in the sample annealed at 500 K. It is proposed that the recombination between trapped electrons and O^– radical ions results in transfer of recombination energy to the impurity centre Ce³⁺ resulting in TSL glow peak at 485 K. In the case of co-doped samples energy transfer occurs between Ce³⁺ to Sm³⁺ resulting in increase in the intensity of glow peak at 485 K.The authors are grateful to Dr. V. K. Manchanda, Head, Radiochemistry Division, BARC for his keen interest and encouragement during the course of this work.     

Coordination and spectral-luminescence characteristics of Ce3+ in nonaqueous solutions

By means of luminescence spectroscopy, through the characteristics of interconfiguration transitions 4f^n–1 5d 4fⁿ, a study has been made of the composition and structure of the coordination sphere of Ce³⁺ in anhydrous alcohols in the presence of the inorganic anions ClO^– ₄, Cl^–, Br^–, and SCN^–. For solutions of CeCl₃ - or CeBr₃ or Ce(SCN)₃ ^–, it has been shown that the inner-sphere complexes Ce(R - OH)_8–XA_X ^{3 -x} dominate (where R 0B is a solvent molecule; A is an anion) in the concentration interval from 10^–4 to 10^–2 M, x = l. In solutions of Ce· (ClO )₄ in addition to the inner-sphere complex' an anion-freer form Ce(R³⁺ OH)_{6 3+} has been found. In the solutions that were investigated, dynamic equilibrium constants were determined, and also the absorption and luminescence characteristics of the individual species.A. N. Sevchenko Scientific-Research Institute of Applied Physics Problems, Belorussian University, Minsk. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, No. l, pp. 114–119, January–February, 1991. Original article submitted May 3, 1990.     

Quantitative chemical analysis on paper: Micro-determination of copper and a mixture of copper and silver

Summary A method has been suggested for the determination of small amounts of copper and of mixtures of copper and silver using filter paper impregnated with silver chloride and sodium carbonate. The method depends on competition between copper and silver ions to form complexes with cyanide added to the paper. The area of the spot produced by conversion of AgCl into Ag(CN)₂ ^– is measured by weight, and is inversely proportional to the amount of copper present, since the Cu(CN)₄ ^3– complex is preferentially formed. The silver present is determined separately, and the amount of copper calculated.The determination is possible in the presence of Bi³⁺, C³⁺, Mn²⁺, Pb²⁺, K⁺, Na⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mg²⁺, NH₄ ⁺, Al³⁺, Sn²⁺, Hg²⁺, Ag⁺, Fe²⁺, Fe³⁺, NO₃ ^–, SO₄ ^2–, CO₃ ^2–, CrO₄ ^2–, Cl^–, Br^–, and SCN^–.The determination is impossible in the presence of I^–, I₂, Zn²⁺, Cd²⁺, Hg₂ ²⁺, Co²⁺, or Ni²⁺.The method permits the determination of 4–30g of copper and 8–60g of silver with an accuracy of 2%.

---

Zusammenfassung Eine Methode zur Bestimmung kleiner Kupfermengen und von Kupfer-Silber-Gemischen mit Hilfe von Filtrierpapier wird vorgeschlagen, das mit Silberchlorid und Natriumcarbonat imprägniert ist. Sie beruht auf der Konkurrenz zwischen Kupfer und Silber bei der Komplexbildung mit Cyanid, das man auf das Papier aufbringt. Das Flächenausmaß des durch Komplexierung des Silbers gebildeten Fleckens wird gravimetrisch bestimmt. Es ist umgekehrt proportional zur Menge anwesenden Kupfers, da [Cu(CN)₄]^3– bevorzugt gebildet wird. Das Silber wird getrennt bestimmt und so die Kupfermenge berechnet.Die Bestimmung ist möglich in Gegenwart von Bi³⁺, Cr³⁺, Mn²⁺, Pb²⁺, K⁺, Na⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mg²⁺, NH₄ ⁺, A1³⁺, Sn²⁺, Hg²⁺, Ag⁺, Fe²⁺, Fe³⁺, NO₃ ^–, SO₄ ^2–, CO₃ ^2–, CrO₄ ^2–, Cl^–, Br^– und SCN^– und nicht möglich in Gegenwart von J^–, J₂, Zn²⁺, Cd²⁺, Hg₂ ²⁺, Co²⁺ oder Ni²⁺.4 bis 30g Kupfer sowie 8 bis 60g Silber können mit einer Genauigkeit von 2% bestimmt werden.

---

Résumé On propose une méthode pour doser de petites quantités de cuivre et de mélanges de cuivre et d'argent, à l'aide de papier-filtre imprégné de chlorure d'argent et de carbonate de sodium. La méthode dépend de l'effet compétitif entre les ions cuivre et argent pour former les complexes avec le cyanure déposé sur le papier. La surface de la tache formée en transformant le chlorure d'argent en Ag(CN)₂ ^– est mesurée par pesée et est inversement proportionnelle à la quantité de cuivre présent, puisque le complexe Cu(CN)₄ ^3– se forme préférentiellement. L'argent présent est dosé séparément et la quantité de cuivre s'en déduit par calcul.Le dosage est possible en présence de Bi³⁺, Cr³⁺, Mn²⁺, Pb²⁺, K⁺, Na⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mg²⁺, NH₄ ⁺, Al³⁺, Sc³⁺, Hg²⁺, Ag⁺, Fe²⁺, Fe³⁺, NO₃ ^–, SO₄ ^2–, CO₃ ^2–, CrO₄ ^2–, Cl^–, Br^– et SCN^–.Le dosage est impossible en présence de I^–, I₂ ^–, Zn²⁺, Cd²⁺, Hg²⁺, Co²⁺ ou Ni²⁺. La méthode permet le dosage de 4 à 30g de cuivre et de 8 à 60g d'argent avec une précision de 2%.

     

Resorufin, Resazurin und einige ihrer Derivate als titanometrische und stannometrische Indicatoren

Zusammenfassung Resorufin, Resazurin und einige ihrer Derivate sind auf ihre Eignung als titanometrische und stannometrische Redoxindicatoren in stark salzsaurer Lösung untersucht worden. Als am besten geeignet erwiesen sich MethylÄtherresorufin, MethylÄtherresazurin, ÄthylÄtherresorufin und ÄthylÄtherresazurin, wobei die Fehler bei allen Bestimmungen unter ± 0,6% lagen. Mit 0,01 n TiCl₃-Lösung können in CO₂-AtmosphÄre die Ionen Fe³⁺, Au³⁺, Cr₂O₇ ^2–, [Fe(CN)₆]^3– und VO₃ ^–, mit 0,01 n SnCl₂ Lösung die Ionen Fe³⁺, Ir⁴⁺, Cr₂O₇ ^2–, [Fe(CN)₆]^3–, [PtCl₆]^2– und VO₃ ^– direkt titriert werden.

---

Summary Resorufin, resazurin and some of their derivates have been examined for their applicability as titanometric and stannometric indicators in hydrochloride acid medium. Methylether resorufin, methylether resazurin, ethylether resorufin and ethylether resazurin have been found to be most suitable, the error of all determinations being below ± 0.6%. By means of 0.01 N TiCl₃ solution Fe³⁺, Au³⁺, Cr₂O₇ ^2–, [Fe(CN)₆]^3– and VO₃ ^– can be titrated in CO₂ atmosphere, 0.01 N SnCl₂ solution can be applied to the titration of Fe³⁺, Ir⁴⁺, Cr₂O₇ ^2–, [Fe(CN)₆]^3– and VO^3–.

---

---

Ich danke Frau S. ujová für die technische Hilfe.     

Kinetics of anation of hexaaquachromium(III) by thiocyanates – specific salt effects

The kinetics of anation of hexaaquachromium(III) by thiocyanates follows the rate law: –d[complex]/dt=k[NCS] (20–40°C, [NCS^–]=0.1–0.6M, I=2.0M, pH=1.0). The specific salt effect has been studied for five media: NaCl, NaBr, NaClO₄, KCl and CsCl. The series of chloride (Na⁺, K⁺ and Cs⁺) salts show a negligible effect on the anation rate. On the contrary, the series of sodium salts (Cl^–, Br^– and ClO ₄ ^– ) reveal a marked difference in the reaction rate. The anation rate decreases sharply with the ionic strength increase (I=0.2–2.0M, NaCl). The results were interpreted within the frame of fast equilibria of ion-pair formation followed by an interchange mechanism step. The difference of reaction rate is a result of competition between anions (thiocyanates and supporting electrolyte anions) to the complex cation at an ion-pair formation process.     

Kinetic and mechanistic studies on the interaction of<Emphasis Type="SmallCaps">DL</Emphasis> -Penicillamine with the hydroxopentaaquarhodium(III) ion

The kinetics of interaction between DL-Penicillamine and [Rh(H₂O)₅OH]²⁺ have been studied spectrophotometrically as a function of [Rh(H₂O)₅OH²⁺], [DL-Pen], pH and temperature. The reaction has been monitored at 242 nm, the _max of the substituted complex and where the spectral difference between the reactant and product is a maximum. The reaction rate increases with [DL-Pen] and reaches a limiting value at a higher ligand concentration. From the experimental findings an associative interchange mechanism for the substitution process is suggested. The activation parameters (H}=35.8 ± 1.6 kJ mol^–1, S=–209 ± 5 J K^–1 mol^–1) support the proposition. The negative G ⁰ (–13.6 kJ mol^–1) for the first equilibrium step also supports the spontaneous formation of an outersphere association complex.     

Amphotere Ionenaustauscherharze

Zusammenfassung N-Methyl--aminopropionsäure-Harz bindet infolge Komplexbildung Cu²⁺, UO₂ ²⁺, Bi³⁺, Cr³⁺ und Fe³⁺, während Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺, Pb²⁺, Be²⁺, Tl⁺, NH₄ ⁺, Alkali-, Erdalkali- und Seltenerdionen keine Kapazität zeigen. Durch Variation des pH-Wertes, der Temperatur und Neutralsalzzusatz kann die Selektivität noch erhöht werden. Die analytische Anwendbarkeit wird an Hand von Trennungen binärer Gemische belegt, die oft als Filtrationsverfahren mit geringem Arbeits- und Zeitaufwand durchgeführt werden können.

---

Summary N-Methyl--aminopropionic acid (MAP) containing resin binds Cu²⁺, UO₂ ²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ due to its coordinating tendencies, whereas Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺, Pb²⁺, Be²⁺, Tl⁺, NH₄ ⁺, alkalines, alkaline earths and rare earths are not retained. The selectivity can be increased by variation of pH, temperature and inert-salt background. Analytical applications have been shown by separations of binary mixtures. Sometimes these separations are simple and rapid filtration operations.

---

---

1. Mitteilung: Kühn, G., u. E. Hoyer: J. prakt. Chem. (im Druck).

---

Dem Direktor des Instituts für Anorganische Chemie, Herrn Prof. Dr. H. Holzapfel, gilt unser Dank für das entgegengebrachte Interesse und die Überlassung von Institutsmitteln.

---

Herrn Doz. Dr. R. Hering, Güstrow, danken wir für wertvolle Hinweise.     

Kinetics and mechanisms of the oxidation of the octacyanoniobate(III)ion by oxyanions in alkaline aqueous media

Summary The kinetics and mechanisms of the oxidation of Nb(CN) _inf8 ^sup5– by the oxyanions S₂O _inf8 ^sup2– , BrO _inf3 ^sup– , and IO _inf4 ^sup– have been investigated in alkaline aqueous media (pH 12). The second-order rate constant for the electron transfer reaction between Nb(CN) _inf8 ^sup5– and S₂O _inf8 ^sup2– at 25.0 °C, I = 0.36m (K⁺), is 11.1± 0.3 m ^–1 s ^–1 with H = 30 ± 2kJmol^–1 and S = - 125 + 7JK^–1 mol^–1. The rate constant for the oxidation of Nb(CN) _inf8 ^sup5– by BrO _inf3 ^sup– at 25.0 °C, I = 0.20m (Na⁺), is 2.39 ± 0.08m ^–1 s ^–1 with H = 28 ± 2kJmol^–1 and S = -139 ± 7JK^–1mol^–1. The oxidation of Nb(CN) _inf8 ^sup5– by IO _inf4 ^sup– proceeds by two parallel pathways involving the monomeric IO _inf4 ^sup– ion and the hydrated dimer H₂I₂O _inf10 ^sup4– . The second-order rate constant for the oxidation of Nb(CN) _inf8 ^sup5– by monomeric IO _inf4 ^sup– at 5.0 °C, I = 0.050m (Na⁺), is (3.3 ± 0.6) × 10³ m ^–1 s ^–1 with H = 75 ± 6 kJ mol^–1 and S = 94 ± 15 J K^–1 mol^–1, while the rate constant for the oxidation by H₂I₂O _inf10 ^sup4– is (1.8 ± 0.1) × 10³ m ^–1 s ^–1 with H = 97 ± 5 kJ mol^–1 and S = 166 ± 16 J K^–1 mol^–1 under the same reaction conditions. The rate constants for each of the oxidants employed display specific cation catalysis with the order of increasing rate constants: Li⁺ < Na+ < NH _inf4 ^sup+ < K⁺ < Rb⁺ < Cs⁺, in the same direction as the electronic polarizability of the cations. The results are discussed in terms of the outer-sphere electron-transfer processes and compared with the corresponding data and mechanisms reported for other metal-cyano reductants.