Bis(4-diphenylaminophenyl)carbazole end-capped fluorene as solution-processed deep-blue light-emitting and hole-transporting materials for electroluminescent devices

A new highly fluorescent bis(4-diphenylaminophenyl)carbazole end-capped fluorene (TCF) is synthesized and characterized. TCF is an amorphous molecular glass with a high glass transition temperature of 169 °C, is electrochemically stable, and gives strong blue emission both in solution and solid state. It showed greater ability as a solution processed blue emitter and hole-transporter for OLEDs than commonly used NPB. High-efficiency, deep-blue and Alq3-based green devices with luminance efficiencies and CIE coordinates of 0.93 cd/A and (0.16, 0.09), and 3.78 cd/A and (0.29, 0.45) were achieved, respectively.     

Synthesis,characterization, and catalytic properties of a cobalt(II) complex supported by an amine-bis(phenolate) ligand

A cobalt(II) complex [L′CoPy] 1 was prepared by the reaction of dimethylaminoethylamino-N,N-bis(2,4-dibromo)phenol (H₂L′) with CoCl₂. Electrochemical studies indicate that this complex is among the most efficient homogeneous catalysts for water reduction, with a turnover frequency of 917.7 mol of hydrogen per mole of catalyst per hour at an overpotential of 636.7 mV (pH 7.0). Additionally, under photoirradiation with blue light (λ _max = 469 nm), complex 1 in combination with [Ru(bpy)₃]Cl₂ and ascorbic acid (pH 4.0 in aqueous solution) also produces hydrogen with a turnover number of 4.9 × 10⁵ mol of H₂ per mol of catalyst.     

A novel carbazole-based ratiometric fluorescent sensor for Zn recognition through excimer formation and application of the resultant complex for colorimetric recognition of oxalate through IDAs

A new carbazole-based Zn²⁺ selective fluorescent sensor L has been developed. In CH₃CN/H₂O (1:1, v/v, HEPES 10 mM, pH=7.4) solution, L displays selective and ratiometric responses to Zn²⁺ through excimer formation. The Zn²⁺ recognition process has good anti-interference ability over other metal ions. The dinuclear complex Zn₂L₂ was further used as a receptor for oxalate. Through constructing a chemosensing ensemble with chromeazurol S, colorimetric recognition of oxalate in water solution was achieved via indicator displacement assays. The oxalate recognition process exhibits obvious color changes from blue to yellow and is naked eye detectable.     

Synthesis, photoluminescent and electrochromic properties of new aromatic poly(amine-hydrazide)s and poly(amine-1,3,4-oxadiazole)s derived from 4,4′-dicarboxy-4″-methyltriphenylamine

A series of new poly(amine-hydrazide)s I were prepared from the dicarboxylic acid 4,4′-dicarboxy-4″-methyltriphenylamine with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. Polymers I were readily soluble in many common organic solvents, and could be solution cast into transparent, tough, and flexible films with good mechanical properties. Differential scanning calorimetry (DSC) indicated that the hydrazide polymers had T_g’s in the range of 222-223 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300-400 °C. The resulting poly(amine-1,3,4-oxadiazole)s II exhibited T_g’s in the range of 269-283 °C, 10% weight-loss temperatures in excess of 511 °C, and char yield at 800 °C in nitrogen higher than 63%. These poly(amine-hydrazide)s I exhibited strong UV-Vis absorption bands at 351-355 nm in NMP solution. Their photoluminescence spectra in NMP solution and film showed maximum bands around 459-461 nm in the blue region for I series. The hole-transporting and electrochromic properties are examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the poly(amine-hydrazide)s I prepared by casting polymer solution onto an indium-tin oxide (ITO)-coated glass substrate exhibited one reversible oxidation redox couples at 1.32-1.33 V vs. Ag/AgCl in acetonitrile solution. All obtained poly(amine-hydrazide)s I revealed excellent stability of electrochromic characteristics, changing color from original pale yellowish to blue.     

Strong dual-state emission of unsymmetrical and symmetrical thiazolothiazole-bridged imidazolium salts

A novel thiazolothiazole-bridged imidazole derivative (1) was found to exhibit blue fluorescence in gaseous state or in methanol and yellow fluorescence in solid state. The N-alkylation of imidazole subunit(s) in 1 using n-propyl iodide generated unsymmetrically or symmetrically alkylated thiazolothiazole-bridged imidazolium salts with good water solubility and remarkably strong emission in solution. Furthermore, the replacement of iodide counter-anion by triflate or bis(trifluoromethane sulfonyl)imide achieved remarkably strong emission in solid state and in solution as well as good water solubility. The strong fluorescence of dicationic salts with triflate and NTf₂^– counter-anions in solid state can be ascribed to their twisted and rigid structures induced by interionic C?H···F hydrogen bonding.     

PEI/SiO2复合型吸附材料对脲酸吸附特性的研究

通过γ-氯丙基三甲氧基硅烷的偶联, 将聚乙烯亚胺(PEI)偶合接枝在硅胶微粒表面, 制得了对脲酸有强吸附性能的复合型医用吸附材料PEI/SiO₂. 静态吸附实验结果表明, 凭借强烈的氢键相互作用, 硅胶表面的聚胺大分子PEI对脲酸的互变异构体三羟基嘌呤具有很强的吸附能力, 等温吸附满足Freundlich吸附方程, 饱和吸附量可达84.9 mg/g; 介质的pH值对吸附作用有很大的影响, 在中性溶液中(pH＝6～7), 复合吸附材料PEI/SiO₂对脲酸具有强吸附能力, 而在酸性与碱性溶液中吸附能力都较弱; 温度对吸附性能也有影响, 升高温度吸附量增大.     

Facile synthesis of Fe3O4@C hollow nanospheres and their application in polluted water treatment

Nanostructured carbon-based materials, such as carbon nanotube arrays have shown respectable removal ability for heavy metal ions and organic dyes in aqueous solution. Although the carbon-based materials exhibited excellent removal ability, the separation of them from the aqueous solution is difficult and time-consuming. Here we demonstrated a novel and facile route for the large-scale fabrication of Fe₃O₄@C hollow nanospheres, with using ferrocene as a single reagent and SiO₂ as a template. The as-prepared Fe₃O₄@C hollow nanospheres exhibited adsorption ability for heavy metal ions and organic dyes from aqueous solution, and can be easily separated by an external magnet. When the as-prepared Fe₃O₄@C hollow nanospheres were mixed with the aqueous solution of Hg²⁺ within 15 min, the removal efficiency was 90.3%. The as-prepared Fe₃O₄@C hollow nanospheres were also exhibited a high adsorption capacity (100%) as the adsorbent for methylene blue (MB). In addition, the as-prepared Fe₃O₄@C hollow nanospheres can be used as the recyclable sorbent for water treatment via a simple magnetic separation.     

Facile synthesis of blue-emitting carbon dots@mesoporous silica composite spheres

This paper reported a facile and effective approach towards high-efficient composite luminophores by embedding blue-emitting N-doped carbon dots into spherical SiO₂ matrix (CDs@SiO₂). Mesoporous silica microspheres (r-CDs@MSN) with strong luminescence were synthesized by removing CTAB templates in CDs@SiO₂ using reflux with acetone. The r-CDs@MSN possess a spherical morphology with smooth surface and a diameter of 130 nm, while it exhibits an excitation-independent blue emission peak at 440 nm with an internal quantum yield of 21.5%. BET result shows that the corresponding surface area and adsorption total pore volume are 156.27 m²/g and 0.682 cm³/g, which is suitable for the drugs loading and release. The results indicate that r-CDs@MSN might act as a potential fluorescent drug carrier.     

Determination of calcium,magnesium, and phosphate in the presence of iron and each other

Excess EDTA and MgSO₄ solution is added to a mildly acidic solution of the sample containing calcium, magnesium, iron, and phosphate ions. Addition of NH₄OH to this solution results in the precipitation of MgNH₄PO₄·6H₂O and various iron compounds. Calcium ions and a portion of the magnesium ions stay in the solution as the respective EDTA chelates. The mixture is adjusted to a known volume and filtered. The EDTA content of the filtrate with the exception of the EDTA tied up as calcium-EDTA chelate, is titrated with standard CaCl₂ solution at pH 12.5–13.0 in the presence of hydroxy naphthol blue indicator. The calcium content of the sample can be calculated from the result of this titration.     

Development of colorimetric receptors for selective discrimination between isomeric dicarboxylate anions

Three new chromogenic receptors (1, 2, and 3) containing p-nitrophenyl or p-nitronaphthyl group appended to the thiourea units or containing p-nitrophenyl group appended to the urea moiety were synthesized and characterized. Upon addition of a series of isomeric dicarboxylate anions to receptor 1 in DMSO/H₂O (80:20 v/v), the appearance of the solution of receptor 1 with maleate or phthalate showed color changes from blue to green or blue to dark-green, respectively, which those can be detected by naked eye at parts per million. Similar experiments were repeated using 2, the solution showed a distinct color change from blue to pink only when 2 is formed as a complex with maleate. Whereas, the addition of the same isomeric dicarboxylate anions to receptor 3, did not induce any color change. Thus, for unique color change, both receptors 1 and 2 can act as optical chemosensors for recognition of maleate versus fumarate. In addition, the receptor 1 can also be a colorimetric receptor for selective discrimination between aromatic isomeric dicarboxylate anions.     

Two inorganic-organic hybrid materials based on polyoxometalate anions and methylene blue: Preparations, crystal structures and properties

Two novel inorganic-organic hybrid materials based on an organic dye cation methylene blue (MB) and Lindqvist-type POM polyanions, [C₂₂H₁₈N₃S]₂Mo₆O₁₉ 2DMF (1) and [C₂₂H₁₈N₃S]₂W₆O₁₉ 2DMF (2) were synthesized under ambient conditions and characterized by CV, IR spectroscopy, solid diffuse reflectance spectrum, UV-vis spectra in DMF solution, luminescent spectrum and single crystal X-ray diffraction. Crystallographic data reveal that compounds 1 and 2 are isostructural and both crystallize in the triclinic space group P1¯. Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong π···π stacking interactions between dimeric MB cations and near distance interactions among organic dye cations, Lindqvist-type POM polyanions and DMF molecules. The solid diffuse reflectance spectra and UV-vis spectra in DMF solution appear new absorption bands ascribed to the charge-transfer transition between the cationic MB donor and the POM acceptors. Studies of the photoluminescent properties show that the formation of 1 and 2 lead to the fluorescence quenching of starting materials.     

Aqueous mineralization process to synthesize uniform shuttle-like BaMoO4 microcrystals at room temperature

Single-crystalline BaMoO₄ microcrystals with uniform shuttle-like morphology have been successfully prepared via a facile aqueous solution mineralization process at room temperature. It was found that the pH value and the reaction temperature had important influences on the formation of the BaMoO₄ microcrystals. The shuttle-like microcrystals can be obtained in alkaline aqueous solution (pH=9-14), and when the pH value was adjusted to 6-7, cocoon-like microcrystals appeared. A possible two-stage growth process has been proposed, and the Ostwald ripening was responsible for the formation of the shuttle-like BaMoO₄ microcrystals. The products were characterized by XRD, XPS, FESEM, HRTEM and Raman spectroscopy. Room-temperature photoluminescence indicated that the as-prepared BaMoO₄ microcrystals had a strong blue emission peak centered at 438 nm.     

Stable Blue Luminescent CsPbBr3 Perovskite Nanocrystals Confined in Mesoporous Thin Films

Creating CsPbBr₃ perovskite nanocrystals with bright blue emission is challenging because their optical properties depend sensitively on structure. Growing perovskites in mesoporous templates bypasses some of these purification issues because the size of the nanocrystal is governed by the dimensions of the pores. Mesoporous silica consisting of aligned channels with tunable diameter can be easily synthesized and used as a template. When the perovskite solution evaporates and retreats, some of the liquid remains trapped in the interconnecting pores by discontinuous dewetting. The precursor crystallizes, generating stable ca. 3.1 nm blue‐emitting perovskite nanocrystals. The mesoporous template also serves as a protective barrier to preserve the optical properties of the CsPbBr₃ from atmospheric conditions. Compared to the bulk crystals and the powder composite, the strong blue‐shift of the emission peak in the film is accompanied by a decrease in the longer lifetime component and an 8‐fold increase in the external quantum efficiency.     

Pulse Polarographic: Determination of Nanogram Amounts of Ortho-Phosphate

Abstract

A procedure has been developed for the pulse polarographic determination of nanogram amounts of ortho-phosphate based on the reduction of molybdenum blue formed from 12-molydophosphate. The molybdenum blue is extracted into iso-amyl alcohol from acid solution, and the extract is then washed free of excess molybdate with dilute sulphuric acid. Finally, the molybdenum blue is back-extracted into a tartrate buffer and is pulse polarographed. Precise determinations can be made on 10 ng of PO₄ ³ ml^?11 in the polarographed solution. Determinations have been made on standard and sample ortho-phosphate solutions at the 2 ng of PO₄ ³ ml^?11 level by effecting a five-fold concentration at the extraction step.     

A new length detection-micro fluidic device using an autocatalytic reaction

A new length detection-micro fluidic device was developed using a sodium sulfite/hydrogen peroxide autocatalytic reaction system as a model reaction, and sub-ppm levels of horse radish peroxidase were determined with this device. Sodium sulfite solution containing bromo thymol blue as an indicator and hydrogen peroxide solution were pumped into a T-shaped mixer with the help of a microliter syringe pump and then mixed. The blue solution had changed to yellow beyond the midpoint of the fine pathway (micro channel). Furthermore, when horse radish peroxidase (PO_x) was pumped, a part of the blue solution in the micro channel (blue band) was shortened. Therefore, it was possible to determine the PO_x concentration by via the length of the blue band. The relationship between the blue band length (y, mm) and the common logarithm of the PO_x concentration (x, M) gave a straight line in the concentration range of 0.05–1 ppm. The equation for the straight line was as follows: y = −3.78 log(x) + 16.4. The correlation coefficient was γ = 0.995, the relative standard deviation was 5.7% (n = 10), and the detection limits of the PO_x concentration was 0.029 ppm. Correspondence: Shukuro Igarashi, Department of Biomolecular Functional Engineering, Faculty of Engineering, Ibaraki University, Nakanarusawa 4-12-1, Hitachi, Ibaraki 316-8511, Japan     

New ladder‐type conjugated polymer containing carbazole and fluorene units in backbone: Synthesis,optical, and electrochemistry properties

This article describes the synthesis and characterization of a new ladder‐type poly (p‐phenylene) (LPFC) containing alkylcarbazole and dialkylfluorene units in backbone, and its optical and electrochemical properties as well as its light‐emitting device performance. LPFC shows the well‐defined structure, high molecular weights, excellent thermal stability, and good solubility in common organic solvents. And it also shows strongly blue emission (λ_max = 465 nm) with quantum efficiency of 70% in solution, while its solid emission (λ_max = 470 nm) is almost the same as its solution. Electrochemical studies show that the highest occupied molecular orbital (HOMO) energy levels of LPFC is up to 5.29 eV, which is significantly higher than that of LPPP without carbazole in backbone, indicating an enhanced ability of hole injection from anodes. Furthermore, the single layer light‐emitting device using LPFC as the active layer shows blue emission (λ_max = 470 nm) with maximum luminescence of ～ 2000 cd/m² and maximum luminance efficiency of 0.43 cd/A. The attractive properties exhibited from new ladder‐type polymer establish LPFC as a good candidate for the potential application as transporting and emitting layer in polymeric light emitting diodes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3120–3127, 2008     

Concomitant polymorphism of an antiferromagnetically coupled dicopper(II,II) complex with single strand helical assembly: Synthesis,structure, DSC,magnetic and heterogeneous catalytic studies

Two concomitant polymorphic coordination complexes (dark blue – I and black – II) with the formula (Cu₂C₄₄H₆₀N₄O₄) have been synthesized and characterized crystallographically. Magnetic measurements show the presence of a strong antiferromagnetic interaction and the 2J value corresponds extremely well to the theoretically calculated one, indicating the fact that it follows nicely the magneto-structural relationship. Immobilization of the copper(II) complex 1 on a 2D-hexagonal mesoporous silica showed good catalytic efficiency in the liquid phase partial oxidation of olefins in the presence of TBHP as an oxidant.     

Two novel blue pigments with ellagitannin moiety, rosacyanins A1 and A2, isolated from the petals of Rosa hybrida

Two novel blue pigments, rosacyanins A1 and A2, were isolated from the petals of Rosa hybrida cv. ‘M'me. Violet’. Their structures were elucidated on the basis of high-resolution Fourier transform ion cyclotron resonance mass spectroscopy (HR-FT-ICR-MS), FABMS/MS/MS, ¹H, ¹³C and two-dimensional NMR. The molecular formulas of rosacyanin A1 (1) and A2 (2) are C₅₆H₃₇O₃₁ and C₆₃H₄₁O₃₅, respectively. The structures of rosacyanins A1 and A2 consisted of a common chromophore containing cyanidin with a galloyl group link between positions 4 and 5 of the hydroxyl group of the flavylium nucleus and tellimagrandins (1 or 2). These pigments in which anthocyanidin nuclei linked to ellagitannin through an ether bond are the first compounds isolated from natural sources.     

Pulsed Corona Discharge for Degradation of Methylene Blue in Water

A pulsed corona discharge in multiwire-plate geometry, generated above water was studied for the removal of organic compounds in liquids. The degradation of methylene blue (MB) and the formation of hydrogen peroxide (H₂O₂) were investigated. The MB solution was rapidly decolorized, evidencing the degradation of the dye after approximately 10 min plasma treatment. Nitrate, formate, sulphate and chlorine ions have been detected in the treated solution, explaining partly the change in the solution properties with plasma exposure, i.e. increase of electrical conductivity and decrease of pH. It was found that the concentration of H₂O₂ generated in water increased with plasma exposure time, reaching 200 mg/L after 30 min treatment. In the MB solution less hydrogen peroxide was detected, suggesting reactions with the dye and its degradation products. The addition of FeCl₂ catalyst had a slight favorable effect on methylene blue degradation due to Fenton’s reaction. It was observed that MB and H₂O₂ concentrations continue to decrease after the plasma treatment was stopped, suggesting that active species which accumulate in the solution may react post-plasma with methylene blue and its degradation products.     

Synthesis,liquid crystalline properties and fluorescence of polycatenar 1,3,4‐oxadiazole derivatives

A series of hexacatenar liquid crystals containing the 1,3,4‐oxadiazole group as rigid core, i.e. 1,4‐bis[(3,4,5‐trialkoxyphenyl)‐1,3,4‐oxadiazolyl]‐ benzene (P‐P‐oxd‐n), were designed and synthesised. Based on a detailed study of their thermotropic phase behaviour and mesophase structures, it was revealed that columnar phases are generated in these materials. Furthermore, combination of experimental and calculated results enabled a proposal for the molecular packing in the mesophase. The photoluminescent properties of these materials were examined using P‐P‐oxd‐8 as an example. A strong blue light emission (λ_max = 456 nm) was observed in P‐P‐oxd‐8 and a higher quantum yield was obtained in dilute chloroform solution.