Preparation of Fe3O4@SiO2@layered double hydroxide core-shell microspheres for magnetic separation of proteins

Three-component microspheres containing an SiO(2)-coated Fe(3)O(4) magnetite core and a layered double hydroxide (LDH) nanoplatelet shell have been synthesized via an in situ growth method. The resulting Fe(3)O(4)@SiO(2)@NiAl-LDH microspheres display three-dimensional core-shell architecture with flowerlike morphology, large surface area (83 m(2)/g), and uniform mesochannels (4.3 nm). The Ni(2+) cations in the NiAl-LDH shell provide docking sites for histidine and the materials exhibit excellent performance in the separation of a histidine (His)-tagged green fluorescent protein, with a binding capacity as high as 239 μg/mg. The microspheres show highly selective adsorption of the His-tagged protein from Escherichia coli lysate, demonstrating their practical applicability. Moreover, the microspheres possess superparamagnetism and high saturation magnetization (36.8 emu/g), which allows them to be easily separated from solution by means of an external magnetic field and subsequently reused. The high stability and selectivity of the Fe(3)O(4)@SiO(2)@NiAl-LDH microspheres for the His-tagged protein were retained over several separation cycles. Therefore, this work provides a promising approach for the design and synthesis of multifunctional LDH microspheres, which can be used for the practical purification of recombinant proteins, as well as having other potential applications in a variety of biomedical fields including drug delivery and biosensors.     

Mesoporous Fe2O3 microspheres: rapid and effective enrichment of phosphopeptides for MALDI-TOF MS analysis

Mesoporous Fe(2)O(3) microspheres have been successfully synthesized by the polymerization (urea and formaldehyde)-induced ferric hydroxide colloid aggregation. The urea-formaldehyde resin was removed by calcination in air. The obtained mesoporous Fe(2)O(3) materials have spherical morphology with uniform particle size of approximately 3.0 microm and porous surface with large inter-particle pores of approximately 48.0 nm. The surface area is as large as approximately 33.3 m(2)/g and the pore volume is 0.31 cm(3)/g. The mesoporous Fe(2)O(3) microspheres were used for the enrichment of phosphopeptides for the first time, in which high sensitivity, selectivity and capacity of specifically enriched phosphopeptides were achieved under a mild condition in a relative short time. After enriched from tryptic digest products of beta-casein by the novel mesoporous Fe(2)O(3) microspheres, phosphopeptides can be selectively detected with high intensity in MALDI-TOF mass spectrometry. Elimination of "shadow effect" was observed by using mesoporous Fe(2)O(3) microspheres, and the detectable limitation is 5x10(-10) M. This material is also effective for enrichment of phosphopeptides from the complex tryptic digests of commercial phosphoprotein casein, with much more phosphorylated sites (26 in 27 of total) and higher signal/noise ratio in the MALDI-TOF mass spectrometry, compared to commercial Fe(2)O(3) nanoparticles. It shows a great potential application in the field of rapid and effective isolation of phosphopeptides.     

Mesoporous Au/TiO2 nanocomposite microspheres for visible-light photocatalysis

Mesoporous Au/TiO(2) nanocomposite microspheres have been synthesized by using a microemulsion-based bottom-up self-assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m(2) g(-1)) and open mesopores (about 5 nm), which led to the adsorption-driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible-light photo-induced degradation of organic compounds.     

Preparation of phenyl‐functionalized magnetic mesoporous silica microspheres for the fast separation and selective enrichment of phenyl‐containing peptides

Peptide enrichment before mass spectrometry analysis is essential for large‐scale peptidomic studies, but challenges still remain. Herein, magnetic mesoporous silica microspheres with phenyl group modified interior pore walls were prepared by a facile sol–gel coating strategy, and were successfully applied for selective enrichment of phenyl‐containing peptides in complex biological samples. The newly prepared nanomaterials possessed abundant silanol groups in the exterior surface and numerous phenyl groups in the interior pore walls, as well as a large surface area (592.6 m²/g), large pore volume (0.33 cm³/g), uniform mesopores (3.8 nm), strong magnetic response (29.3 emu/g), and good dispersibility in aqueous solution. As a result of the unique structural properties and size‐exclusion effect, the core–shell phenyl‐functionalized magnetic mesoporous silica microspheres exhibited excellent performance in fast separation and selective enrichment of phenyl‐containing peptides, and the adsorption capacity for bradykinin reached 22.55 mg/g. In addition, selective enrichment of phenyl‐containing peptides from complex samples that are consist of peptides, large proteins, and human serum were achieved by using the as‐prepared microspheres, followed by high‐performance liquid chromatography with ultraviolet detection and electrospray ionization quadrupole time‐of‐flight mass spectrometry analysis. These results demonstrated the as‐prepared microspheres would be a potential candidate for endogenous phenyl‐containing peptides enrichment and biomarkers discovery in peptidome analysis.     

Preparation of magnetic core mesoporous shell microspheres with C18-modified interior pore-walls for fast extraction and analysis of phthalates in water samples

In this study, core-shell magnetic mesoporous microspheres with C18-functionalized interior pore-walls were synthesized through coating Fe(3)O(4) microspheres with a mesoporous inorganic-organic hybrid layer with a n-octadecyltriethoxysilane (C18TES) and tetraethyl orthosilicate (TEOS) as the silica source and cetyltrimethylammonia bromide (CTAB) as a template. The obtained C18-functionalized Fe(3)O(4)@mSiO(2) microspheres possess numerous C18 groups anchored in the interior pore-walls, large surface area (274.7 m(2)/g, high magnetization (40.8 emu/g) and superparamagnetism, uniform mesopores (4.1 nm), which makes them ideal absorbents for simple, fast, and efficient extraction and enrichment of hydrophobic organic compounds in water samples. Several kinds of phthalates were used as the model hydrophobic organic compounds to systematically evaluate the performance of the C18-functionalized Fe(3)O(4)@mSiO(2) microspheres in extracting hydrophobic molecules by using a gas chromatography-mass spectrometry. Various parameters, including eluting solvent, the amounts of absorbents, extraction time and elution time were optimized. Hydrophobic extraction was performed in the interior pore of magnetic mesoporous microspheres, and the materials had the anti-interference ability to macromolecular proteins, which was also investigated in the work. Under the optimized conditions, C18-functionalized Fe(3)O(4)@mSiO(2) microspheres were successfully used to analyze the real water samples. The results indicated that this novel method was fast, convenient and efficient for the target compounds and could avoid being interfered by macromolecules.     

Time-dependent control of hole-opening degree of porous ZnO hollow microspheres

Well-designed, monodispersed porous ZnO hollow microspheres with controlled hole-opening were successfully synthesized by a facile two-step solution route at low temperature. The hollow microspheres having average diameter of 3-4 μm showed time-dependent hole-opening, i.e. 4-100% for 15-75 min. The hole-opening percentage increases linearly with time until complete opening. The ZnO hollow microspheres also exhibited a high surface area (34 m(2) g(-1)), a large pore volume (0.19 cm(3) g(-1)) and an average pore diameter of 3.8 nm. A plausible growth mechanism for the formation of ZnO hollow microspheres was also proposed.     

控制自由基聚合制备Fe3O4/SiO2/P(AA-MMA-St)磁性复合微球

用原硅酸乙酯对Fe3O4纳米粒子进行表面改性得到Fe3O4/SiO2磁流体.在Fe3O4/SiO2磁流体存在下,以1,1-二苯基乙烯(DPE)为自由基聚合控制剂,利用乳液聚合法制备了Fe3O4/SiO2/P(AA-MMA-St)核-壳磁性复合微球.用红外光谱(FTIR)、振动样品磁强计(VSM)、透射电镜(TEM)、X光电子能谱(XPS)、热重分析(TGA)、示差扫描量热仪(DSC)对所制备的磁流体、磁性高分子复合微球的结构、形态、性能进行了表征.研究发现,原硅酸乙酯水解后能在Fe3O4表面形成硅膜保护层从而避免Fe3O4的酸蚀,使Fe3O4/SiO2/P(AA-MMA-St)复合微球的比饱和磁化强度比同样条件下制备的Fe3O4/P(AA-MMA-St)微球提高了28%;DPE能有效控制自由基在Fe3O4/SiO2磁流体表面均匀地引发单体聚合,得到平均粒径为422 nm,无机粒子含量为40%,比饱和磁化强度为34.850 emu/g,表面羧基含量为0.176 mmol/g的磁性复合微球.     

磁性热敏聚合物微球的制备及磁感应控制释放行为

采用种子乳液聚合法在Fe3O4纳米粒子表面聚合包覆N-异丙基丙烯酰胺(NIPAM)与α-甲基丙烯酸(MAA)的共聚物,制备了磁性热敏聚合物微球Fe3O4/P(NIPAM-co-MAA).利用广角X射线衍射仪(WAXD)、透射电子显微镜(TEM)、zeta粒度仪(DLS)、热重分析(TGA)、振动样品磁力计(VSM)及比表面积测试仪(BET)等对微球的结构与形貌进行了表征,通过紫外-可见光分光光度法(UV-Vis)研究了微球对水溶性模型药物罗丹明B(RhB)的负载和磁感应控制释放行为.结果表明,微球粒径为80～200 nm,比表面积约为30.04m2/g,平均孔径约为24.50 nm;微球中聚合物含量约为73 wt%,磁粒子含量约为20 wt%,饱和磁感应强度为16.49 emu/g,其体积相转变温度(VPTT)约为37.5℃.RhB在微球中的装载量可以达到16.38 mg/g;在外加交变磁场作用下,RhB在模拟肠液和胃液中的磁感应释放量分别达到10.47和13.02 mg/g.     

Hierarchical NiCo2O4 microspheres assembled by nanorods with p-type response for detection of triethylamine

The morphological and structural design provides an efficient protocol to optimize the performance of gas sensing materials. In this work, a gas sensor with high sensitivity for triethylamine (TEA) detection is developed based on p-type NiCo₂O₄ hierarchical microspheres. The NiCo₂O₄ microspheres, synthesized by a hydrothermal route, have a three-dimensional (3D) urchin-like structure assembled by nanorod building blocks. The structure-property correlation has been investigated by powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscope, scanning electron microscope, N₂ adsorption-desorption tests and comprehensive gas sensing experiments. The influence of calcination temperature on the morphological structure and sensing performances has been investigated. Results reveal that the material annealed at 300 °C has a very large specific surface area of 125.27 m²/g, thereby demonstrating the best TEA sensing properties including high response and low limit of detection (145 ppb), good selectivity and stability. The further increase of the calcination temperature leads to the collapse of the 3D hierarchical structure with significantly decreased surface area, which is found to decline the sensing performances. This work indicates the promise of ternary p-type metal oxide nanostructures for application in highly sensitive gas sensors.     

Facile method for synthesis of hollow porous magnetic microspheres with controllable structure

Hollow porous magnetic microspheres with strong magnetization and controllable structure were prepared via a facile electrostatic self-assembly of the positively charged Fe(3)O(4) nanoparticles onto the surface of the negatively charged poly(N,N'-methylenebisacrylamide-co-methacrylic acid) (P(MBAAm-co-MAA)) microspheres with subsequent removal of the polymer core through calcination at high temperature. The shell thickness was facilely tuned through the ratio between Fe(3)O(4) and polymer, and the void space was conveniently changed through the size of polymer microspheres. The hollow magnetic microspheres possessed high saturation magnetization value (51.38 emu/g) and porous structure with high specific surface area (108.04 m(2)/g). Based on these properties, the drug loading and release behaviors were investigated, which indicated that the hollow magnetic microspheres exhibited a controlled release process.     

Ag负载TiO2核壳基底的制备及对结晶紫的高效(SERS)检测

通过简单的一步水热法制备了TiO2核壳微球,然后经过原位光还原将Ag负载于其表面,成功得到了用于有机分子检测的Ag负载TiO2核壳表面增强拉曼散射（SERS）基底。得益于TiO2核壳微球的结构,其对结晶紫（CV）分子表现出高的吸附容量。单一TiO2核壳微球对CV的检测限为10-3 M,而负载Ag以后,其对CV的检测限能达到10-7 M,增强因子（EF）可达3.49×105。优异的SERS检测性能可能归因于以下几点：（1）半导体TiO2为Ag纳米粒子提供了均匀分散的骨架,创造了高密度的热点;（2）为CV分子提供了大的吸附面积;（3）复合材料促进了激发光子的相互作用。     

Synthesis of γ-Al2O3 with High Surface Area and Large Pore Volume by Reverse Precipitation-azeotropic Distillation Method

γ-Al₂O₃ with high surface area and large pore volume combined with high thermal stability was synthesized by a reverse precipitation-azeotropic distillation method. The effects of azeotropic distillation on the characteristics of γ-Al₂O₃ were studied by means of X-ray diffraction(XRD), Fourier transform infrared(FTIR) spectroscopy, transmission electron microscopy(TEM) and N₂ adsorption-desorption. The results show that γ-Al₂O₃ dried by azeotropic distillation has excellent structure characteristics with a high surface area of 426 m²/g and a large pore volume of 2.56 cm³/g. After calcination at 1100℃, the surface area of γ-Al₂O₃ was still 92 m²/g with a large pore volume of 1.00 cm³/g, indicating the potential application in catalyst and petroleum industry.     

Preparation of PS/TiO2/UF multilayer core-shell hybrid microspheres with high stability

In this paper, we report a facile method for preparation of polystyrene/titania/urea-formaldehyde resin (PS/TiO(2)/UF) multilayer core-shell hybrid microspheres with high stability through in situ condensation polymerization. The TEM images show that the thickness of UF shells is about 10 nm. The Zeta potential is close to zero. The density of PS/TiO(2)/UF could be controlled to 1.85 g/cm(3), which matches well with the non-polar dispersant (tetrachloroethylene). They are well dispersed and remain non-agglomerated even over several months, so they could be potential building blocks to fabricate electrophoretic display. Some parameters such as the ratio of urea-formaldehyde prepolymer (UFP) to PS/TiO(2), the pH value, and the temperature are also investigated.     

Preparation and properties of magnetic alumina microspheres with a γ-Fe_2O_3/SiO_2 core and Al_2O_3 shell

Magnetic alumina composite microspheres with γ-Fe 2 O 3 core/Al 2 O 3 shell structure were prepared by the oil column method. A dense silica layer was deposited on the surface of γ-Fe 2 O 3 particles (denoted as γ-Fe 2 O 3 /SiO 2 ) with a desired thickness to protect the iron oxide core against acidic or high temperature conditions. γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 particles with about 85 wt% Al 2 O 3 were obtained and showed to be suitable for practical applications as a magnetic catalyst or catalyst support due to their magnetic properties and pore structure. The products were characterized with scanning electron microscope (SEM) and transmission electron microscope (TEM), nitrogen adsorption-desorption, and vibrating sample magnetometer (VSM). The specific surface area and pore volume of the γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 composite microspheres calcined at 500 ? C were 200 m 2 /g and 0.77 cm 3 /g, respectively.     

Hybridization of Al2O3 microspheres and acrylic ester resins as a synergistic absorbent for selective oil and organic solvent absorption

In this study, we have focused on the synthesis, characterization, and oil absorption properties of Al₂O₃ microspheres/acrylic ester resin (AER) hybrids. The Al₂O₃ microspheres are prepared by a combined hydrothermal and sintering processes, followed by surface modification with silane coupling agent (KH 570). The Al₂O₃ microspheres/AER hybrids with a rough surface are synthesized by a microwave polymerization route by using modified Al₂O₃ microspheres as modifiers. In this hybrid materials system, the Al₂O₃ microspheres with porous structures may provide fast oil absorption due to the low oils absorption energy and short diffusion lengths. The resin hybrids exhibited reversible oils and organic solvents adsorption with maximum absorption capacities up to 29.85 g/g. This study suggests potential environmental advantage in using metal oxide microspheres in improving the oil absorption properties of oil‐absorbing resins as absorbents for recovering oil and organic solvent from water.     

高Fe_3O_4含量单分散P(St/AA)复合微球的合成与表征

在表面由十一烯酸和油酸共同修饰的Fe3O4磁流体存在下,以苯乙烯(St)和丙烯酸(AA)为共聚单体,用细乳液聚合法,制备了单分散,高Fe3O4含量,且表面带有羧基的超顺磁性高分子复合微球.采用透射电镜(TEM),热重分析(TGA),物性测量系统(PPMS),Zeta电位以及红外光谱等手段对磁性复合微球的各项性能进行表征.结果表明,Fe3O4粒子的表面改性是影响复合微球Fe3O4含量及形貌的关键因素.在优化的实验条件下,可以制得Fe3O4含量高达77wt%,平均粒径为137·9nm,表面羧基密度0·0894mmol/g,比饱和磁化强度为44·7emu/g的单分散超顺磁性高分子复合微球.     

Preparation of polypyrrole-coated magnetic particles for micro solid-phase extraction of phthalates in water by gas chromatography-mass spectrometry analysis

In this work, polypyrrole (PPy)-coated Fe(3)O(4) magnetic microsphere were successfully synthesized, and applied as a magnetic sorbent to extract and concentrate phthalates from water samples. The PPy-coated Fe(3)O(4) magnetic microspheres had the advantages of large surface area, convenient and fast separation ability. The PPy coating of magnetic microspheres contributed to preconcentration of phthalates from water sample, due to the π-π bonding between PPy coating and the analytes. Also, the coating could prevent aggregation of the microspheres, and improve their dispersibility. In this study, seven kinds of phthalates were selected as model analytes, including dimethyl phthalate (DMP), diethyl phthalate (DEP), di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DNOP), and gas chromatography-mass spectrometry (GC-MS) was introduced to detect the phthalates after sample pretreatment. Important parameters of the extraction procedure were investigated, and optimized including eluting solvent, the amount of Fe(3)O(4)@PPy particles, and extraction time. After optimization, the procedure took only 15 min to extract and concentrate analytes with high efficiency. Validation experiments showed that the optimized method had good linearity (0.985-0.998), precision (3.4-11.7%), high recovery (91.1-113.4%), and the limits of detection were from 0.006 to 0.068 μg/L. The results indicated that the novel method had advantages of convenience, good sensitivity, high efficiency, and it could also be applied successfully to analyze phthalates in real water sample.     

介孔SiO2/Fe3O4中空磁性微球的漆酶固定化

以介孔SiO2/Fe3O4磁性中空微球作为载体,采用物理吸附法对漆酶进行固定化,考察了时间、温度和pH值对漆酶固定化效果的影响,并对固定漆酶的活性及稳定性进行了研究.结果表明,介孔SiO2/Fe3O4磁性中空微球吸附漆酶分子后,介孔材料的比表面积与孔体积均减小.在3 h时复合微球对漆酶的吸附达到平衡,复合微球中介孔SiO2对漆酶的有效固定量为689 mg/g,大大高于纯介孔材料MCM-41的漆酶固定量(319 mg/g).在pH=3～6的条件下,复合微球中固定漆酶仍保持70%以上的相对酶活.当温度不高于60℃时,固定漆酶的相对酶活仍保持65%以上.固定漆酶的pH稳定性和热稳定性都明显优于游离漆酶,固定漆酶的米氏常数为1.05 mmol/L,与游离漆酶相比,固定漆酶与底物的亲和力有所降低.当2,4-二氯苯酚的浓度为10 mg/L时,固定漆酶对其去除率在6 h时达到81.6%,表现出很好的催化活性.     

反应介质pH值和前驱体用量对PSt/TiO_2复合微球结构形态及TiO_2空心微球形貌的影响

首先用聚乙烯亚胺(PEI)对粒径为360 nm的单分散无皂聚苯乙烯(PSt)乳胶粒进行修饰,得到表面荷正电的PSt种子乳液,然后将其滴加到溶有钛酸正丁酯(TBT)的乙醇与水的混合介质中,通过溶胶-凝胶(sol-gel)法制备出了核壳结构PSt/TiO2复合微球,系统研究了体系pH和TBT用量对复合微球结构形态的影响.研究表明,酸性条件不利于核壳结构PSt/TiO2复合微球的形成;当体系pH值为7.2时,可得到包覆完整、TiO2壳层厚度均一的PSt/TiO2复合微球,此后随着体系pH值的升高,包覆厚度逐渐提高;当pH值升高到11.0时,壳层厚度达到最大,但出现了包覆层不完整的复合微球.在固定聚合体系pH为8.5,EtOH/H2O质量比为100/6,表面修饰PSt种子乳液用量为0.5 g(固含量为4%)的条件下,随着TBT用量从0.01 g增加到0.16 g,复合微球壳层厚度从约0 nm逐渐增加到60 nm;当TBT用量增加到0.32 g时,壳层厚度迅速降至12nm,微球表面变得粗糙,并出现大量未包覆微粒;此后随着TBT用量的增加,包覆层厚度逐渐减少,未包覆微球逐渐增多.结果显示,当复合微球中TiO2包覆层达到一定厚度时,经煅烧后才能得到形貌完整的TiO2中空微球.